SEARCH · Search NASA

Results for “CLOUDS. RADIATION. MODELING.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Contrasting characteristics of open- and closed-cellular stratocumulus cloud in the eastern North Atlantic

Abstract. Extensive regions of marine boundary layer cloud impact the radiative balance through their significant shortwave albedo while having little impact on outgoing longwave radiation. Despite this importance, these cloud systems remain poorly represented in large-scale models due to difficulty in representing the processes that drive their life cycle and coverage. In particular, the mesoscale organization and cellular structure of marine boundary clouds have important implications for the subsequent cloud feedbacks. In this study, we use long-term (2013–2018) observations from the Atmospheric Radiation Measurement (ARM) Facility's Eastern North Atlantic (ENA) site on Graciosa Island, Azores, Portugal, to identify cloud cases with open- or closed-cellular organization. More than 500 h of each organization type are identified. The ARM observations are combined with reanalysis and satellite products to quantify the cloud, precipitation, aerosol, thermodynamic, and large-scale synoptic characteristics associated with these cloud types. Our analysis shows that both cloud organization populations occur during similar sea surface temperature conditions, but the open-cell cases are distinguished by stronger cold-air advection and large-scale subsidence compared to the closed-cell cases, consistent with their formation during cold-air outbreaks. We also find that the open-cell cases were associated with deeper boundary layers, stronger low-level winds, and higher rain rates compared to their closed-cell counterparts. Finally, raindrops with diameters larger than 1 mm were routinely recorded at the surface during both populations, with a higher number of large drops during the open-cellular cases. The similarities and differences noted herein provide important insights into the environmental and cloud characteristics during varying marine boundary layer cloud mesoscale organization and will be useful for the evaluation of model simulations for ENA marine clouds.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Investigation of Surface and Marine-Cloud Coupling and its Impact on Cloud Droplet Number Concentrations and Cloud Cover Over the Southern Ocean

The proposed work involves characterizing and quantifying both the thermodynamic and dynamical coupling of marine low clouds (MLC) with the sea surface using Atmospheric Radiation Measurement (ARM) observations during MARCUS field campaign and an LES model. ARM data from multiple sensors will be used (e.g., Doppler cloud radar, ceilometer, and microwave radiometer) to characterize the MLC-surface coupling by virtue of the vertical structure and integrated quantities of boundary-layer clouds, aerosols, as well as atmospheric profiles and surface meteorology. We have used a combination of case studies and statistics-based composite analyses to find any linkages between large-scale dynamics, MLC-surface coupling, and cloud and boundary layer properties, the sequence of which reflects the chain of causality. An LES model with explicit aerosol physics, which includes the cycle of aerosols by being consumed as CCN and be regenerated following cloud droplet evaporation, has been run to determine the sources and sinks of Nd and their dependence on the degree of MLC-surface coupling. We have examined the systematic differences in both Nd and cloud occurrence between the two clusters under different meteorological conditions and further examine their respective roles, as well as causal relationships by means of LES modeling. This study helped improve our understanding of the ACI by differentiating the dynamic role of the coupling and cloud physics denoted by Nd, bridging the linkage in the chain toward understanding mechanisms governing the persistence of MLC over the Southern Ocean, solving the long-lasting problem of the cloud cover underestimation over the SO by GCMs. Ample ARM data and LES model have been employed to achieve the objectives of the study.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1994

Radiatively forced dispersion of the Mt. Pinatubo volcanic cloud and induced temperature perturbations in the stratosphere during the first few months following the eruption

A combined 3-dimensional circulation model and aerosol microphysical/transport model is used to simulate the dispersion of the Mt. Pinatubo volcanic cloud in the stratosphere for the first few months following the eruption. Radiative heating of the cloud due to upwelling infrared radiation from the troposphere is shown to be an important factor affecting the transport. Without cloud heating, cloud material stays mostly north of the equator, whereas with cloud heating, the cloud is transported southward across the equator within the first two weeks following the eruption. Generally the simulations agree with Total Ozone Mapping Spectrometer (TOMS), Advanced Very High Resolution Radiometer (AVHRR), and Stratospheric Aerosol and Gas Experiment (SAGE) satellite observations showing the latitude distribution of cloud material to be between about 20 deg S and 30 deg N within the first few months. Temperature perturbations in the stratosphere induced by the aerosol heating are generally 1-4 K, in the range of those observed.

Young, Richard E.↗

NASA NTRS2003

Satellite and Surface Data Synergy for Developing a 3D Cloud Structure and Properties Characterization Over the ARM SGP. Stage 1: Cloud Amounts, Optical Depths, and Cloud Heights Reconciliation

One of the primary Atmospheric Radiation Measurement (ARM) Program objectives is to obtain measurements applicable to the development of models for better understanding of radiative processes in the atmosphere. We address this goal by building a three-dimensional (3D) characterization of the cloud structure and properties over the ARM Southern Great Plains (SGP). We take the approach of juxtaposing the cloud properties as retrieved from independent satellite and ground-based retrievals, and looking at the statistics of the cloud field properties. Once these retrievals are well understood, they will be used to populate the 3D characterization database. As a first step we determine the relationship between surface fractional sky cover and satellite viewing angle dependent cloud fraction (CF). We elaborate on the agreement intercomparing optical depth (OD) datasets from satellite and ground using available retrieval algorithms with relation to the CF, cloud height, multi-layer cloud presence, and solar zenith angle (SZA). For the SGP Central Facility, where output from the active remote sensing cloud layer (ARSCL) valueadded product (VAP) is available, we study the uncertainty of satellite estimated cloud heights and evaluate the impact of this uncertainty for radiative studies.

Genkova, I.↗

DOE OSTI2021

An efficient method to identify uncertainties of WRF-Solar variables in forecasting solar irradiance using a tangent linear sensitivity analysis

Uncertainty in predicting solar energy resources introduces major challenges in power system management and necessitates the development of reliable probabilistic solar forecasts. As the first part of the development of probabilistic forecasts based on the Weather Research and Forecasting model with solar extensions (WRF-Solar), this study presents a tangent linear approach to identify input variables responsible for the largest uncertainties in predicting surface solar irradiance and clouds. A tangent linear analysis is capable of efficiently investigating sensitivities of output variables with respect to various input variables of WRF-Solar because this approach avoids the computational burden of perturbing the initial conditions of individual input variables. We develop tangent linear models (TLMs) for six WRF-Solar physics packages that control the formation and dissipation of clouds and solar radiation, and we evaluate the validity of TLMs using a linearity test. The tangent linear sensitivity analysis is conducted under various scenarios based on satellite observations and model simulations to consider realistic input conditions. A simple method is used to quantify the impact of the uncertainty of input variables on the output variables from the TLMs. The results demonstrate that uncertainties in the output variables that are the focus of this study—including global horizontal irradiance, direct normal irradiance, cloud mixing ratio, cloud tendency, cloud fraction, and sensible and latent heat fluxes—are highly sensitive to uncertainties in 14 input variables. This study indicates that the tangent linear method can identify key variables of physics modules in WRF-Solar that can be stochastically perturbed to generate ensemble-based probabilistic forecasts.

14 SOLAR ENERGY↗

NASA NTRS1993

Microwave radiative transfer studies of precipitation

Since the deployment of the DMSP SSM/I microwave imagers in 1987, increased utilization of passive microwave radiometry throughout the 10 - 100 GHz spectrum has occurred for measurement of atmospheric constituents and terrestrial surfaces. Our efforts have focused on observations and analysis of the microwave radiative transfer behavior of precipitating clouds. We have focused particular attention on combining both aircraft and SSM/I radiometer imagery with ground-based multiparameter radar observations. As part of this and the past NASA contract, we have developed a multi-stream, polarized radiative transfer model which incorporates scattering. The model has the capability to be initialized with cloud model output or multiparameter radar products. This model provides the necessary 'link' between the passive microwave radiometer and active microwave radar observations. This unique arrangement has allowed the brightness temperatures (TB) to be compared against quantities such as rainfall, liquid/ice water paths, and the vertical structure of the cloud. Quantification of the amounts of ice and water in precipitating clouds is required for understanding of the global energy balance.

Bringi, V. N.↗

DOE OSTI2015

Low-cloud characteristics over the tropical western Pacific from ARM observations and CAM5 simulations

Here, this study evaluates the ability of the Community Atmospheric Model version 5 (CAM5) to reproduce low clouds observed by the Atmospheric Radiation Measurement (ARM) cloud radar at Manus Island of the tropical western Pacific during the Years of Tropical Convection. Here low clouds are defined as clouds with their tops below the freezing level and bases within the boundary layer. Low-cloud statistics in CAM5 simulations and ARM observations are compared in terms of their general occurrence, mean vertical profiles, fraction of precipitating versus nonprecipitating events, diurnal cycle, and monthly time series. Other types of clouds are included to put the comparison in a broader context. The comparison shows that the model overproduces total clouds and their precipitation fraction but underestimates low clouds in general. The model, however, produces excessive low clouds in a thin layer between 954 and 930 hPa, which coincides with excessive humidity near the top of the mixed layer. This suggests that the erroneously excessive low clouds stem from parameterization of both cloud and turbulence mixing. The model also fails to produce the observed diurnal cycle in low clouds, not exclusively due to the model coarse grid spacing that does not resolve Manus Island. Lastly, this study demonstrates the utility of ARM long-term cloud observations in the tropical western Pacific in verifying low clouds simulated by global climate models, illustrates issues of using ARM observations in model validation, and provides an example of severe model biases in producing observed low clouds in the tropical western Pacific.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1998

Absorption of Solar Radiation by the Cloudy Atmosphere: Further Interpretations of Collocated Aircraft Measurements

We have extended the interpretations made in two prior studies of the aircraft shortwave radiation measurements that were obtained as part of the Atmospheric Radiation Measurements (ARM) Enhanced Shortwave Experiments (ARESE). These extended interpretations use the 500 nm (10 nm bandwidth) measurements to minimize sampling errors in the broadband measurements. It is indicated that the clouds present during this experiment absorb more shortwave radiation than predicted by clear skies and thus by theoretical models, that at least some (less than or equal to 20%) of this enhanced cloud absorption occurs at wavelengths less than 680 nm, and that the observed cloud absorption does not appear to be an artifact of sampling errors nor of instrument calibration errors.

Cess, R. D.↗

DOE OSTI2024

Improving Aerosol Radiative Forcing and Climate in E3SM: Impacts of New Cloud Microphysics and Improved Wet Removal Treatments

Abstract Numerous Earth system models exhibit excessive aerosol effective forcing at the top of the atmosphere (TOA), including the Department of Energy's Energy Exascale Earth System Model (E3SM). Here, in the context of the E3SM version 3 effort, the predicted particle property (P3) stratiform cloud microphysics scheme and an enhanced deep convection parameterization suite (ZM_plus) are implemented into E3SM. The ZM_plus includes a convective cloud microphysics scheme, a multi‐scale coherent structure parameterization for mesoscale convective systems, and a revised cloud base mass flux formulation considering impacts of the large‐scale environment. The P3 scheme improved cloud and radiation particularly over the Northern Hemisphere and the frequency of heavy precipitation over the tropics, and the ZM_plus improved clouds in the tropics. P3 decreases aerosol effective forcing by 0.15 W m −2 , while the ZM_plus increases it by 0.27 W m −2 , resulting from excessive direct (0.31 W m −2 ) and indirect forcing (−1.79 W m −2 ). The excessive aerosol forcings are due to aerosol overestimation associated with insufficient aerosol wet removal. By improving the physical treatments in the aerosol wet removal, we effectively mitigate anthropogenic aerosol overestimation and thus attenuate direct (0.09 W m −2 ) and indirect aerosol forcing (−1.52 W m −2 ). Adjustment to primary organic matter hygroscopicity reduces direct and indirect forcing to more reasonable values: −0.13 W m −2 and −1.31 W m −2 , respectively. On climatology, improved aerosol treatments mitigate overestimation of aerosol optical depth.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2006

An Improved Algorithm for Retrieving Surface Downwelling Longwave Radiation from Satellite Measurements

Retrieving surface longwave radiation from space has been a difficult task since the surface downwelling longwave radiation (SDLW) are integrations from radiation emitted by the entire atmosphere, while those emitted from the upper atmosphere are absorbed before reaching the surface. It is particularly problematic when thick clouds are present since thick clouds will virtually block all the longwave radiation from above, while satellites observe atmosphere emissions mostly from above the clouds. Zhou and Cess developed an algorithm for retrieving SDLW based upon detailed studies using radiative transfer model calculations and surface radiometric measurements. Their algorithm linked clear sky SDLW with surface upwelling longwave flux and column precipitable water vapor. For cloudy sky cases, they used cloud liquid water path as an additional parameter to account for the effects of clouds. Despite the simplicity of their algorithm, it performed very well for most geographical regions except for those regions where the atmospheric conditions near the surface tend to be extremely cold and dry. Systematic errors were also found for areas that were covered with ice clouds. An improved version of the algorithm was developed that prevents the large errors in the SDLW at low water vapor amounts. The new algorithm also utilizes cloud fraction and cloud liquid and ice water paths measured from the Cloud and the Earth's Radiant Energy System (CERES) satellites to separately compute the clear and cloudy portions of the fluxes. The new algorithm has been validated against surface measurements at 29 stations around the globe for the Terra and Aqua satellites. The results show significant improvement over the original version. The revised Zhou-Cess algorithm is also slightly better or comparable to more sophisticated algorithms currently implemented in the CERES processing. It will be incorporated in the CERES project as one of the empirical surface radiation algorithms.

Zhou, Yaping↗

DOE OSTI2025

Corrigendum to “The Emissions Model Intercomparison Project (Emissions-MIP): quantifying model sensitivity to emission characteristics” published in Atmos. Chem. Phys., 23, 14779–14799, 2023

Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO 2 injection, seasonality of SO 2 and black carbon (BC) particulate emissions, and the assumed fraction of SO 2 emissions that is injected into the atmosphere as particulate phase sulfate (SO 4 ) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO 2 , SO 4 , and BC, with a particularly large relative variation for SO 2 , which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO 2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of -0.35?W?m-2), SO2 lifetime over Northern Hemisphere land (maximum difference of 0.8?d), surface SO 2 concentration (up to 59?% decrease), and surface sulfate concentration (up to 23?% increase). Emitting SO 2 at height consistently increased SO 2 and SO 4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO 4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO 4 emission fraction are accurately and consistently represented in global models.

Ahsan, Hamza [Pacific Northwest National Laborator↗

NASA NTRS2020

Radiative Heating from Biomass Burning Aerosol and its Impact on Cloud Structure in the Southeast Atlantic

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. The observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site. Due to documented discrepancies in the single scatter albedo (SSA) between models and observations, further sensitivity experiments will demonstrate the importance of the optical properties of biomass burning aerosol in accurately representing heating within the column. Finally, the heating rates will be put into context of the cloud structure over the site from the perspective of the mass flux closure from the University of Washington shallow convective scheme.

Collow, Allison↗

NASA NTRS2023

The Emissions Model Intercomparison Project (Emissions-MIP): Quantifying Model Sensitivity to Emission Characteristics

Anthropogenic emissions of aerosols and precursor compounds are known to significantly affect the energy balance of the Earth–atmosphere system, alter the formation of clouds and precipitation, and have a substantial impact on human health and the environment. Global models are an essential tool for examining the impacts of these emissions. In this study, we examine the sensitivity of model results to the assumed height of SO 2 injection, seasonality of SO 2 and black carbon (BC) particulate emissions, and the assumed fraction of SO 2 emissions that is injected into the atmosphere as particulate phase sulfate (SO 4 ) in 11 climate and chemistry models, including both chemical transport models and the atmospheric component of Earth system models. We find large variation in atmospheric lifetime across models for SO 2 , SO 4 , and BC, with a particularly large relative variation for SO 2 , which indicates that fundamental aspects of atmospheric sulfur chemistry remain uncertain. Of the perturbations examined in this study, the assumed height of SO 2 injection had the largest overall impacts, particularly on global mean net radiative flux (maximum difference of −0.35 W m −2 ), SO 2 lifetime over Northern Hemisphere land (maximum difference of 0.8 d), surface SO 2 concentration (up to 59 % decrease), and surface sulfate concentration (up to 23 % increase). Emitting SO 2 at height consistently increased SO 2 and SO 4 column burdens and shortwave cooling, with varying magnitudes, but had inconsistent effects across models on the sign of the change in implied cloud forcing. The assumed SO 4 emission fraction also had a significant impact on net radiative flux and surface sulfate concentration. Because these properties are not standardized across models this is a source of inter-model diversity typically neglected in model intercomparisons. These results imply a need to ensure that anthropogenic emission injection height and SO 4 emission fraction are accurately and consistently represented in global models.

Emissions Model Intercomparison Project↗

NASA NTRS2022

The Turning Point of the Aerosol Era

Over the CMIP6 historical period (1850–2014), aerosols provided the largest negative forcing compared to all other climate forcings via their ability to absorb or scatter solar radiation and alter clouds. Aerosols played an important role in counterbalancing warming by greenhouse gases (GHGs). Here we study aerosol forcing trends in the CMIP6 simulations of the NASA Goddard Institute for Space Studies (GISS) ocean-atmosphere ModelE version 2.1 (GISS-E2.1-G) using a fully coupled atmospheric composition configuration, including interactive gas-phase chemistry, and either an aerosol microphysical (MATRIX) or a mass-based aerosol (OMA) module. Simulations of the CMIP6 historical period are analyzed as well as four Shared Socioeconomic Pathway (SSP) future scenarios for 2015–2100: SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5. The main conclusion of this study is that aerosol forcing in the GISS model has reached its turning point, switching from globally increasing to a decreasing trend in the first decade of the 21st century. This result is robust, independent of which aerosol module or SSP scenario is used. Non-linear aerosol-cloud interactions dominate as a forcing agent over aerosol-radiation interactions. Aerosols' ability to counterbalance GHG forcing on the global scale is today at a level comparable to that at the beginning of the last century. In the 1980s, the decade of largest global aerosol loads, aerosols balanced up to 80% of GHG forcing. As a consequence, global warming of the last decades, which is primarily driven by greenhouse gases, has been augmented by the effect of decreasing aerosol cooling in our model. By the end of this century, following the SSP scenarios, aerosols will only counterbalance 0%–20% of GHG forcing, depending on model and on scenario.

Aerosol forcing↗

NASA NTRS2021

The First Global 883 GHz Cloud Ice Survey: IceCube Level 1 Data Calibration, Processing and Analysis

Sub-millimeter (sub-mm, 200 - 1000 GHz) wavelengths contribute a unique capability to fill-in the sensitivity gap between operational visible/infrared (VIS/IR) and microwave (MW) remote sensing for atmosphere cloud ice and snow. Being able of penetrating cloud to measure cloud ice mass and microphysical properties in the middle to upper troposphere, this is a critical spectrum range for us to understand the connection between cloud ice and precipitation processes.5As the first space-borne 883 GHz radiometer, IceCube mission was NASA’s latest effort in spaceflight demonstration of a commercial sub-mm radiometer technology. Successfully launched from the International Space Station, IceCube is essentially a free-running radiometer and collected valuable 15-month measurements of atmosphere and cloud ice. This paper describes the detailed procedures for Level 1 data calibration, processing and validation. The scientific quality and values of IceCube data are then discussed, including radiative transfer model validation and evaluation, as well as the unique spatial distribution10and diurnal cycle of cloud ice that are revealed for the first time on a quasi-global scale at this frequency.

IceCube↗

NASA NTRS2021

The First Global 883 GHz Cloud Ice Survey: IceCube Level 1 Data Calibration, Processing and Analysis

Jie Gong↗

NASA NTRS2019

LongRunMIP - Motivation and Design for a Large Collection of Millennial-Length AO-GCM Simulations

LongRunMIP is the first collection of millennial-length simulations of complex coupled climate models and enables investigations of how these models equilibrate in response to radiative perturbations.We present a model intercomparison project, LongRunMIP, the first collection of millennial-length (1000+ year) simulations of complex coupled climate models with a representation of ocean, atmosphere, sea ice, and land surface, and their interactions. Standard model simulations are generally only a few hundred years long. However, modeling the long-term equilibration in response to radiative forcing perturbation is important for understanding many climate phenomena, such as the evolution of ocean circulation, time-and temperature-dependent feedbacks, and the differentiation of forced signal and internal variability. The aim of LongRunMIP is to facilitate research into these questions by serving as an archive for simulations that capture as much of this equilibration as possible. The only requirement to participate in LongRunMIP is to contribute a simulation with elevated, constant CO2 forcing that lasts at least 1000 years. LongRunMIP is a MIP of opportunity in that the simulations were mostly performed prior to the conception of the archive without an agreed-upon set of experiments. For most models, the archive contains a preindustrial control simulation and simulations with an idealized (typically abrupt) CO2 forcing. We collect 2D surface and top-of-atmosphere fields, and 3D ocean temperature and salinity fields. Here, we document the collection of simulations and discuss initial results, including the evolution of surface and deep ocean temperature and cloud radiative effects. As of summer 2019, the collection includes 50 simulations of 15 models by 10 modeling centers. The data of LongRunMIP are publicly available. We encourage submission of more simulations in the future.

Maria Rugenstein↗

NASA NTRS1983

A numerical investigation of the effects of cloudiness on mesoscale atmospheric circulation

The development of a comprehensive scheme for computing radiative transfer in a cloudy, stratified atmosphere is described, and the interactions of radiation, clouds, surface heating, and frictional processes are investigated utilizing a three-dimensional numerical weather prediction model. This model is described along with the design of a reliable radiative transfer scheme which allows any vertical moisture and temperature stratifications occurring within a numerical weather prediction model to be taken into account. Some preliminary results of sensitivity tests for three 24-hour simulations are depicted in order to identify the forecast fields which respond to change in atmospheric radiation induced by cloudiness.

Wong, V. C.↗