Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Volumetric Intensity-Modulated Arc Therapy Vs. Conventional IMRT in Head-and-Neck Cancer: A Comparative Planning and Dosimetric Study

Purpose: Volumetric intensity-modulated arc therapy (RA) allows for rapid delivery of highly conformal dose distributions. In this study, planning and dosimetry of RA were compared with conventional intensity-modulated radiation therapy (IMRT) plans of head-and-neck cancer patients. Materials and Methods: Computed tomography scans of 12 patients who had completed IMRT for advanced tumors of the naso-, oro- and hypopharynx were replanned using RA using either one or two arcs. Calculated doses to planning target volume (PTV) and organs at risk (OAR) were compared between IMRT and RA plans. Dose distributions for single arc (n = 8) and double arc (n = 4) plans were verified using film dosimetry in three to five coronal planes using a quality assurance phantom. Results: RA plans allowed for a mean reduction in number of monitor units (MU) by nearly 60%, relative to seven field sliding window IMRT plans. RA plans achieved similar sparing of all OAR as IMRT. Double arc RA provided the best dose homogeneity to PTV with a lower standard deviation of PTV dose (1.4 Gy), vs. single arc plans (2.0 Gy) and IMRT (1.7 Gy). Film measurements showed good correspondence with calculated doses; the mean gamma value was 0.30 (double arc) and area of the film with a gamma exceeding 1 was 0.82%. Conclusions: RA is a fast, safe, and accurate technique that uses lower MUs than conventional IMRT. Double arc plans provided at least similar sparing of OAR and better PTV dose homogeneity than single arc or IMRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Preclinical Assessment of Volumetric Modulated Arc Therapy for Total Marrow Irradiation

Purpose: A preclinical investigation was undertaken to explore a treatment technique for total marrow irradiation using RapidArc, a volumetric modulated arc technique. Materials and Methods: Computed tomography datasets of 5 patients were included. Plans with eight overlapping coaxial arcs were optimized for 6-MV photon beams. Dose prescription was 12 Gy in 2 Gy per fraction, normalized so that 100% isodose covered 85% of the planning target volume (PTV). The PTV consisted of the whole skeleton (including ribs and sternum), from the top of the skull to the medium distal third of the femurs. Planning objectives for organs at risk (OARs) were constrained to a median dose <6 to 7 Gy. OARs included brain, eyes, oral cavity, parotids, thyroid, lungs, heart, kidneys, liver, spleen, stomach, abdominal cavity, bladder, rectum, and genitals. Pretreatment quality assurance consisted of portal dosimetry comparisons, scoring the delivery to calculation agreement with the gamma agreement index. Results: The median total body volume in the study was 57 liters (range, 49-81 liters), for an average diameter of 47 cm (range, 46-53 cm) and a total length ranging from 95 to 112 cm. The median PTV volume was 6.8 liters (range, 5.8-10.8 liters). The mean dose to PTV was 109% (range, 107-112%). The global mean of median dose to all OARs was 4.9 Gy (range, 4.5-5.1 Gy over the 5 patients). The individual mean of median doses per organ ranged from 2.3 Gy (oral cavity) to 7.3 Gy (bowels cavity). Preclinical quality assurance resulted in a mean gamma agreement index of 94.3 {+-} 5.1%. The delivery time measured from quality assurance runs was 13 minutes. Conclusion: Sparing of normal tissues with adequate coverage of skeletal bones was shown to be feasible with RapidArc. Pretreatment quality assurance measurements confirmed the technical agreement between expected and actually delivered dose distributions, suggesting the possibility of incorporating this technique in the treatment options for patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Reliable thermodynamic estimators for screening caloric materials

Reversible, diffusionless, first-order solid-solid phase transitions accompanied by caloric effects are critical for applications in the solid-state cooling and heat-pumping devices. Accelerated discovery of caloric materials requires reliable but faster estimators for predictions and high-throughput screening of system-specific dominant caloric contributions. We assess reliability of the computational methods that provide thermodynamic properties in relevant solid phases at or near a phase transition. Here, we test the methods using the well-studied B2 FeRh alloy as a “fruit fly” in such a materials genome discovery, as it exhibits a metamagnetic transition which generates multicaloric (magneto-, elasto-, and baro-caloric) responses. For lattice entropy contributions, we find that the commonly-used linear-response and small-displacement phonon methods are invalid near instabilities that arise from the anharmonicity of atomic potentials, and we offer a more reliable and precise method for calculating lattice entropy at a fixed temperature. Then, we apply a set of reliable methods and estimators to the metamagnetic transition in FeRh (predicted 346 ± 12 K, observed 353 ± 1 K) and calculate the associated caloric properties, such as isothermal entropy and isentropic temperature changes.

36 MATERIALS SCIENCE↗

Adsorption mechanism of alkyl hydroxamic acid onto bastnäsite: Fundamental steps toward rational collector design for rare earth elements

Rare earth element (REE) production is limited in part by inefficient strategies for beneficiation. Hydroxamic acid ligands are promising reagents for the selective flotation of bastnäsite [(Ce,La)FCO 3 ], a major REE ore mineral, but the mechanism and energetics of adsorption are not understood, interfering with the design of new, more efficient reagents. In this work, the adsorption of octyl hydroxamic acid onto bastnäsite was calculated using a combination of experimental and computational methods. In-situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed changes in the hydroxamate functional group vibrational frequencies, corresponding to chelation with cerium cations at the bastnäsite surface. The results indicate a monodentate chemisorption mechanism at low surface loading that changes to bidentate chemisorption at higher concentrations. This interpretation is supported by molecular vibrational frequency shifts calculated using density functional theory (DFT), and orientation of the hydrocarbon chain measured by sum frequency generation (SFG) vibrational spectroscopy. The binding enthalpies of octyl hydroxamic acid interacting with La and Ce-bastnäsite surfaces were measured using isothermal titration calorimetry (ITC) revealing a stronger coordinating ability with bastnäsite than with a common gangue mineral, calcite (CaCO 3 ). Because octyl hydroxamate favors monodentate adsorption at low surface coverages, the relative chelating strength of metal ions could be a poor predictor for selectivity under monolayer adsorption conditions. At higher surface loadings, where the bidentate mode of adsorption is active, selectivity is likely to be limited by increased flotation of gangue ores.

58 GEOSCIENCES↗

Self-consistent inclusion of classical large-angle Coulomb collisions in plasma Monte Carlo simulations

Large-angle Coulomb collisions allow for the exchange of a significant proportion of the energy of a particle in a single collision, but are not included in models of plasmas based on fluids, the Vlasov–Fokker–Planck equation, or currently available plasma Monte Carlo techniques. Their unique effects include the creation of fast ‘knock-on’ ions, which may be more likely to undergo certain reactions, and distortions to ion distribution functions relative to what is predicted by small-angle collision only theories. We present a computational method which uses Monte Carlo techniques to include the effects of large-angle Coulomb collisions in plasmas and which self-consistently evolves distribution functions according to the creation of knock-on ions of any generation. The method is used to demonstrate ion distribution function distortions in an inertial confinement fusion (ICF) relevant scenario of the slowing of fusion products.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementation of the full viscoresistive magnetohydrodynamic equations in a nonlinear finite element code

Numerical simulations form an indispensable tool to understand the behavior of a hot plasma that is created inside a tokamak for providing nuclear fusion energy. Various aspects of tokamak plasmas have been successfully studied through the reduced magnetohydrodynamic (MHD) model. The need for more complete modeling through the full MHD equations is addressed here. Our computational method is presented along with measures against possible problems regarding pollution, stability, and regularity. The problem of ensuring continuity of solutions in the center of a polar grid is addressed in the context of a finite element discretization of the full MHD equations. A rigorous and generally applicable solution is proposed here. Useful analytical test cases are devised to verify the correct implementation of the momentum and induction equation, the hyperdiffusive terms, and the accuracy with which highly anisotropic diffusion can be simulated. A striking observation is that highly anisotropic diffusion can be treated with the same order of accuracy as isotropic diffusion, even on non-aligned grids, as long as these grids are generated with sufficient care. This property is shown to be associated with our use of a magnetic vector potential to describe the magnetic field. Several well-known instabilities are simulated to demonstrate the capabilities of the new method. The linear growth rate of an internal kink mode and a tearing mode are benchmarked against the results of a linear MHD code. The evolution of a tearing mode and the resulting magnetic islands are simulated well into the nonlinear regime. The results are compared with predictions from the reduced MHD model. Finally, a simulation of a ballooning mode illustrates the possibility to use our method as an ideal MHD method without the need to add any physical dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disparate Degrees of Hypervariable Loop Flexibility Control T-Cell Receptor Cross-Reactivity, Specificity, and Binding Mechanism

{alpha}{beta} T-cell receptors (TCRs) recognize multiple antigenic peptides bound and presented by major histocompatibility complex molecules. TCR cross-reactivity has been attributed in part to the flexibility of TCR complementarity-determining region (CDR) loops, yet there have been limited direct studies of loop dynamics to determine the extent of its role. Here we studied the flexibility of the binding loops of the {alpha}{beta} TCR A6 using crystallographic, spectroscopic, and computational methods. A significant role for flexibility in binding and cross-reactivity was indicated only for the CDR3{alpha} and CDR3{beta} hypervariable loops. Examination of the energy landscapes of these two loops indicated that CDR3{beta} possesses a broad, smooth energy landscape, leading to rapid sampling in the free TCR of a range of conformations compatible with different ligands. The landscape for CDR3{alpha} is more rugged, resulting in more limited conformational sampling that leads to specificity for a reduced set of peptides as well as the major histocompatibility complex protein. In addition to informing on the mechanisms of cross-reactivity and specificity, the energy landscapes of the two loops indicate a complex mechanism for TCR binding, incorporating elements of both conformational selection and induced fit in a manner that blends features of popular models for TCR recognition.

59 BASIC BIOLOGICAL SCIENCES↗

Predicting metal-binding proteins and structures through integration of evolutionary-scale and physics-based modeling

Metals are essential elements in all living organisms, binding to approximately 50% of proteins. They serve to stabilize proteins, catalyze reactions, regulate activities, and fulfill various physiological and pathological functions. While there have been many advancements in determining the structures of protein-metal complexes, numerous metal-binding proteins still need to be identified through computational methods and validated through experiments. Here, to address this need, we have developed the ESMBind workflow, which combines evolutionary scale modeling (ESM) for metal-binding prediction and physics-based protein-metal modeling. Our approach utilizes the ESM-2 and ESM-IF models to predict metal-binding probability at the residue level. In addition, we have designed a metal-placement method and energy minimization technique to generate detailed 3D structures of protein-metal complexes. Our workflow outperforms other models in terms of residue and 3D-level predictions. To demonstrate its effectiveness, we applied the workflow to 142 uncharacterized fungal pathogen proteins and predicted metal-binding proteins involved in fungal infection and virulence.

59 BASIC BIOLOGICAL SCIENCES↗

Type IV failure in weldment of creep resistant ferritic alloys: I. Micromechanical origin of creep strain localization in the heat affected zone

Creep strength enhanced ferritic (CSEF) steels containing 9-12wt% chromium have been extensively used in fossil-fuel-fired power plants. Despite their excellent creep resistance at high temperatures, premature failures (especially Type IV cracking) are often found in the fine-grained heat affected zone (HAZ) or intercritical HAZ of the welded components. This failure mode is preceded by the strain localization in the HAZ, as measured by the Digital Image Correlation (DIC) technique. The present work aims to develop a finite-element based computational method to determine the micromechanical and microstructural origin of the strain localization phenomenon. We construct a two-dimensional digital microstructure based on the actual microstructure of ferritic steel weldments by using the Voronoi-tessellation method, to account for the effects of its large grain-size gradients. A mechanism-based finite element method is developed for modeling the high temperature deformation resulting from a synergy of thermally activated dislocation movements, diffusional flow and grain boundary sliding. The numerical results agree well with the strain measurements by our DIC technique, particularly revealing the effect of pre-welding tempering on the evolution of strain localization in HAZ of creep resistant steel weldments. It is found that the diffusional creep with dependence on grain sizes, dislocation creep with dependence on material strength, and more importantly, grain boundary sliding, contribute synergistically to the creep strain accumulation in the HAZ, and their relative degree of significance is quantified. The creep rupture life will be investigated in the companion paper.

36 MATERIALS SCIENCE↗

Revealing the complex chemistry of grain boundaries in K-doped BaFe 2 As 2 with atom probe tomography

Iron-based superconductors have attractive properties for high-field applications, but there is a lack of understanding of the effect of grain boundary chemistry on the in-field performance. The near atomic-scale resolution, ppm sensitivity and 3D analysis offered by atom probe tomography make it a powerful tool to investigate the nanoscale structure and chemistry of these defects in fine-grained K-doped BaFe 2 As 2 samples. A computational method to systematically extract and compare the Gibbsian interfacial excess of chemical species across grain boundaries has been explored in this work. The robustness of the method has been tested by evaluating the effects of selected variables on simulated APT datasets. The accuracy and precision of the calculated Gibbsian interfacial excess were found to be stable over a range of analysis conditions: varying grain boundary widths and detection efficiencies, spatial precisions below 1.5 nm, and bin widths between 1.2 and 1.6 nm. For the K-doped BaFe 2 As 2 samples studied, segregation of As, Ba, K and impurities of O, Na, and Sb were found at grain boundaries. The Gibbsian excess values were found to vary widely between different boundaries, showing the complexity of the grain boundary chemistry in this material. Possible links between the observed critical current density (Jc) of these samples and their nano- and micro-structure have also been investigated and discussed.

36 MATERIALS SCIENCE↗

Integrated simulation of U-10Mo monolithic fuel swelling behavior

Here, a separate computational branch has been implemented within the DART (Dispersion Analysis Research Tool) computational code to simulate the swelling behavior of U-10Mo monolithic fuel under the operating conditions of high-power research and test reactors (RTRs). The monolithic branch of the DART code implements a mechanistic rate-theory-based fission-gas-behavior model for the calculation of fission gas swelling, as well as a suite of thermal, physical, and mechanical models to take into account various processes occurring in RTR fuels during irradiation. In order to accurately simulate and eventually predict U-10Mo monolithic fuel irradiation behavior, the code uses materials properties calculated with lower length-scale computational methods, such as gas atom diffusivity and U-Mo surface energy from atomic simulations and grain-morphology-specific recrystallization kinetics (recrystallized fuel volume fractions vs. fission density) predicted using the phase-field method. The remainder of fission gas behavior parameters used in the model were calibrated with measured intergranular bubble size distributions. With this integrated simulation approach, the swelling behavior of U-10Mo monolithic fuel was simulated for various initial grain sizes at different operating conditions and compared with measured data. Furthermore, because limited experimental data exist for parameter calibration detailed sensitivity studies for the important parameters used in the fission gas behavior model were performed in order to examine their impact on both intergranular gas bubble morphology at low fission density, and on total porosity at high fission density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synthesis and characterization of the dinuclear cobalt(III) complex: [(C 2 F 5 ) 3 Co(μ-F)] 2 2–

Here, reaction of the versatile tris(perfluoroethyl) cobalt(III) precursor [fac-(MeCN) 3 Co(C 2 F 5 ) 3 ] with [NMe 4 ]F and [PPh 4 ]Cl in THF formed the unexpected cobalt(III) bridging fluoride dimer ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– . The new fluoro-organometallic cobalt(III) complex was characterized by NMR and UV-vis spectroscopies, X-ray crystallography, cyclic voltammetry, and by computational methods. In the strongly coordinating solvent MeCN, ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– exhibits dynamic processes on the NMR timescale which are consistent with solvent coordination. However, in the weakly coordinating solvent CH 2 Cl 2 , a more static structure is observed suggesting that the dimer retains its structure in solution state. An electrochemical analysis of ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– was performed, and the data are compared to previously reported cobalt(III) perfluoroethyl complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of charged interfaces on electrolyte decomposition at the lithium metal anode

Lithium–Sulfur batteries are promising candidates to substitute conventional Li-ion batteries due to their higher energy density and reduced cost. However, several challenges related to the reactivity of the lithium metal anode have prevented this technology from becoming broadly commercialized. Lithium's high reactive nature leads to the continuous decomposition of the electrolyte and the formation of the solid-electrolyte interphase (SEI) layer. Thus, a comprehensive understanding of how the SEI film is formed is crucial to help elucidate improvements for this battery technology. In this work, we use density functional theory (DFT) based computational methods to investigate the effect of charged interfaces on the electrolyte degradation at the lithium anode. Here, several electrolyte mixtures were considered including 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL) as solvents, and lithium bis(fluorosulfonyl)imide (LiFSI) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as salts. It is found that the extent of salt decomposition is higher when the interface is charged. In addition, two types of solvent reduction mechanisms are identified: C–O bond cleavage and radical attacks. Charge transfer and evolution analysis are characterized in detail. Finally, solvent decomposition reactions are found to become more thermodynamically favorable and their activation barriers to be diminished under the effect of constant potentials and electric fields.

25 ENERGY STORAGE↗

(Ca/Sr)Au{sub x}Cd{sub 1-x}: Stacking variants of the CrB-FeB series

The structural chemistry of binary 1:1 alkaline earth metallides A{sup II}M (M=p-block or late transition element) is dominated by planar M zig-zag chains, which are stacked in different orientations (CrB (c) to FeB (h) type) and with variable stacking distances (types I and II). As a case study of the electronic influences, the substitution of Au against Cd in the respective Ca and Sr aurides was examined by means of experimental, crystallographic and computational methods. Starting from CaAu, up to 11% of Au can be substituted by Cd without a change in the CrB structure type (orthorhombic, space group Cmcm, a=398.2(1), b=1122.6(6), c=460.9(2)pm, Z=4, R1=0.0303). Starting from SrAu (stacking sequence (hc){sub 2}(h{sub 2}c){sub 2}), depending on the proportion of the Cd substitution a successive change to structures with increased hexagonality is observed: In SrAu{sub 0.93}Cd{sub 0.07} (monoclinic, space group P2{sub 1}/m, a=621.3(4), b=472.4(2), c=1216.1(9)pm, beta=96.97(5){sup 0}, Z=6, R1=0.0467) the stacking sequence is h{sub 2c}, i.e. the hexagonality is 66.67%. A slightly more increased Cd content in SrAu{sub 0.78}Cd{sub 0.22} (orthorhombic, space group Pnma, a=3243.3(8), b=474.17(8), c=626.20(9)pm, Z=16, R1=0.0682) drives the hexagonality to 75%, with a (h{sub 3}c){sub 2} stacking sequence known from several rare earth nickel compounds. Further Cd substitution is not possible. However, in the Cd-rich section of the two series, where the CsCl/beta-brass structure type occurs for both alkaline earth elements, a small Au substitution, as determined from powder data by Rietveld refinements, is possible. The substitution limit and the stability ranges of the CsCl and the CrB type can be rationalized from the calculated band structures. Geometrical and electronic criteria are used to compare and discuss the stability ranges in a structural map. - SrAu{sub 0.93}Cd{sub 0.97}, one of the stacking sequences of the CrB/FeB structure type series found in the quasibinary section SrAu-SrCd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal reactions: From the synthesis of ligand to new lanthanide 3D-coordination polymers

The organic ligand 2,5-piperazinedione-1,4-diacetic acid (H{sub 2}PDA) was synthesized under hydrothermal conditions starting from the iminodiacetic acid and catalyzed by oxalic acid. The X-ray powder diffraction data indicates that the compound crystallizes in the P2{sub 1}/c monoclinic system as reported in the literature. The ligand was also characterized by elemental analysis, magnetic nuclear resonance, infrared spectroscopy and thermogravimetric analysis. Two new coordination networks based on lanthanide ions were obtained with this ligand using hydrothermal reaction. In addition to single-crystal X-ray diffraction, the compounds were characterized by infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and elemental analysis. Single-crystal XRD showed that the compounds are isostructural, crystallizing in P2{sub 1}/n monoclinic system with chemical formula [Ln(PDA){sub 1.5}(H{sub 2}O)](H{sub 2}O){sub 3} (Ln=Gd{sup 3+}(1) and Eu{sup 3+}(2)).The luminescence properties of both compounds were studied. In the compound (1), a broad emission band was observed at 479 nm, redshifted by 70 nm in comparison of the free ligand. In (2), the typical f–f transition was observed with a maximum peak at 618 nm, related with the red emission of the europium ions. Computational methods were performed to simulate the crystal structure of (2). The theoretical calculations of the intensity parameters are in good agreement with the experimental values. - Graphical abstract: Scheme of obtaining the ligand 2,5-piperazinedione-1,4-diacetic acid (H{sub 2}PDA) and two new isostructural 3D-coordination polymers [Ln(PDA){sub 1.5}(H{sub 2}O)](H{sub 2}O){sub 3} (Ln=Gd{sup 3+} and Eu{sup 3+}) by hydrothermal synthesis. Display Omitted - Highlights: • The ligand 2,5-piperazinedione-1,4-diacetic acid was synthetized using the hydrothermic method and characterized. • Two new 3D-coordination polymers with this ligand containing Gd{sup 3+} and Eu{sup 3+} ions were also obtained. • The compounds are isostructural and the typical luminescent properties were observed in both structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures and thermoelectric properties of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudites

The structures and thermoelectric properties of the double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} series (x=0, 0.25, 0.5, 0.75, and 1) have been studied using a combined experimental and computational methods. Compounds of (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} were obtained only for x=0, 0.5, and 1. Composition with x=0.25 was found to be a mixture of x=0 and 0.5 compounds, and composition with x=0.75 was found to be a mixture of x=1 and 0.5 compounds, respectively. Our conclusions on phase formation are supported by density functional theory (DFT) calculations. In Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12,} Ca substitution in the Ce site of CeFe{sub 4}Sb{sub 12} leads to high hole concentrations, resulting in stronger semimetal transport as compared to CeFe{sub 4}Sb{sub 12}. Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12} yields a slightly higher ZT value than that of CeFe{sub 4}Sb{sub 12}, which is attributed to its lower lattice thermal conductivity. Phonon mode calculations adopting a three-particle bending model suggest that thermal conductivity is reduced upon Ca substitution because of an additional vibration mode which involves both Ca and Ce atoms. - Graphical abstract: Detailed structural information to correlate with thermoelectric properties in a series of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudite samples were obtained using synchrotron X-ray diffraction and first principle calculations. - Highlights: • Research focus on phase stability of CaCe double-filled p-type skutterudite. • Stable structure forms for an equiatomic occupancy of the voids by Ca and Ce. • Samples feature two-phase mixtures with variations of filling atoms ratio. • Phase stablility is investigated by DFT total energy calculations. • Sample with Equiatomic occupancy of Ca and Ce show higher ZT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous-based route toward Fe:ZnSe semiconductor nanocrystals: Synthesis and characterization

Nearly monodisperse and luminescent Fe-doped ZnSe semiconductor nanocrystals were synthesized by an aqueous-based route. The obtained nanocrystals were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, photoluminescence and ultraviolet-visible absorption spectroscopy. The resulting nanocrystals were well retained in the zinc blende structure, and the Fe dopants were doped into the ZnSe nanocrystals, as confirmed by X-ray photoelectron spectroscopy. From combination of transmission electron microscopy result and computing methods according to ultraviolet-visible absorption spectrum and X-ray diffraction pattern, particle size of the obtained nanocrystals was found to be about 5 nm. Thioglycolic acid as ligand was successfully capped on the surface of the resulting nanocrystals, confirmed by Fourier transform infrared and energy dispersive X-ray spectroscopy. The obtained nanocrystals exhibit an emission peak at 431 nm; and the photoluminescence band is relatively narrow and symmetric, which indicates that the nanocrystals are nearly monodisperse and homogeneous. Absorption shoulder of the resulting nanocrystals is blue-shifted compared with that of corresponding bulk ZnSe, indicating the quantum confinement effect. The possible reaction mechanism of formation of Fe-doped ZnSe nanocrystals in the aqueous solution was also discussed. Our results demonstrate that the aqueous-based route could be successfully adopted for producing high-quality doped semiconductor nanocrystals. - Research Highlights: {yields} An aqueous-based route is demonstrated for synthesizing Fe:ZnSe nanocrystals. {yields} Structure, composition and optical properties of the nanocrystals were investigated. {yields} The synthetic route could be adopted for producing high-quality doped nanocrystals.

36 MATERIALS SCIENCE↗

CoTiO{sub 3} via cobalt oxalate-TiO{sub 2} precursor. Synthesis and characterization

Purely trigonal ilmenite type powder; CoTiO{sub 3} was successfully synthesized through the thermal decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. The decomposition course was followed using differential thermal analysis-thermogravimetry measurements and the intermediate decomposition products as well as the titanate product were characterized using X-ray diffraction, Fourier transform infrared, transmission electron microscopy techniques. Thermal analysis study indicated that, the intermediate decomposition product; Co{sub 3}O{sub 4} decomposed endothermically into CoO at 963 Degree-Sign C with instantaneous formation of CoTiO{sub 3}. X-ray diffraction of the powder calcined at 950 Degree-Sign C showed characteristic lines for Co{sub 2}TiO{sub 4} besides secondary phase of rutile-TiO{sub 2}, which are disappeared by rising the calcination temperature to 1000 Degree-Sign C. Transmission electron microscopy image of CoTiO{sub 3} powder exhibit weak agglomerated particles with heterogeneous morphology in both shape and dimensions. Type II adsorption isotherm estimated using Brunauer-Emmett-Teller procedure indicated a very high specific surface area of 29.7 m{sup 2} g{sup -1}. Electrical properties of CoTiO{sub 3} measured as a function of temperature and frequency showed a semiconducting behavior at high temperatures with conduction activation energy of 0.73 eV. Kinetic analysis of the non-isothermal thermogravimetry curves, using different computational methods, illustrated that the random nucleation and growth mechanisms are the predominant one. - Graphical Abstract: The figure showed the variation of dielectric constant ({epsilon} Prime ) for CoTiO{sub 3} with temperature at different frequencies. {epsilon} Prime appeared to be temperature and frequency independent at low temperatures. By increasing the temperature, the orientation polarization plays a significant role and a gradual increase of {epsilon} Prime occurred. Highlights: Black-Right-Pointing-Pointer CoTiO{sub 3} was synthesized through decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. Black-Right-Pointing-Pointer XRD, FT-IR, TEM techniques are used to characterize decomposition course. Black-Right-Pointing-Pointer Specific surface area of 29.7 m{sup 2} g{sup -1} was obtained. Black-Right-Pointing-Pointer The prepared titanate showed semiconducting behavior.

36 MATERIALS SCIENCE↗