Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Structural transformation from Mn{sub 3}O{sub 4} nanorods to nanoparticles and band gap tuning via Zn doping

Highlights: Black-Right-Pointing-Pointer Successful doping of Zn in Mn{sub 3}O{sub 4} nanorod has been done by simple hydrothermal method. Black-Right-Pointing-Pointer Increase of Zn doping encouraged the formation of Mn{sub 3}O{sub 4} nanoparticle out of Mn{sub 3}O{sub 4} nanorod. Black-Right-Pointing-Pointer The energy band gap of Mn{sub 3}O{sub 4} nanorod increased continuously with the increase of Zn doping concentration. -- Abstract: Synthesis of undoped and Zn doped hausmannite Mn{sub 3}O{sub 4} nanorods was achieved through a simple hydrothermal route. Scanning electron microscopic studies showed that due to in situ Zn doping a structural deformation from Mn{sub 3}O{sub 4} nanorods to a mixture of Mn{sub 3}O{sub 4} nanorods and nanoparticles occurred. The amount of nanoparticles in the mixture increased with the increase of doping percentage. X-ray diffraction studies, transmission electron microscopy and selected area electron diffraction pattern revealed that both the nanorods and the nanoparticles were hausmannite Mn{sub 3}O{sub 4}. X-ray photoelectron spectroscopic studies confirmed successful zinc doping in Mn{sub 3}O{sub 4}. Microscopic studies revealed that the average diameters of Mn{sub 3}O{sub 4} nanorods and nanoparticles were of 200 nm and 70 nm, respectively. The possible growth mechanism and the reasons behind the formation of nanoparticles along with nanorods are discussed briefly. UV-vis spectroscopic studies showed a continuous increase in the energy bandgap of Mn{sub 3}O{sub 4} with the increase in Zn doping percentage.

36 MATERIALS SCIENCE↗

Simultaneous detection of surface coverage and structure of krypton films on gold by helium atom diffraction and quartz crystal microbalance techniques

We describe a quartz crystal microbalance setup that can be operated at low temperatures in ultra high vacuum with gold electrode surfaces acting as substrate surface for helium diffraction measurements. By simultaneous measurement of helium specular reflection intensity from the electrode surface and resonance frequency shift of the crystal during film adsorption, helium diffraction data can be correlated to film thickness. In addition, effects of interfacial viscosity on the helium diffraction pattern could be observed. To this end, first, flat gold films on AT cut quartz crystals were prepared which yield high enough helium specular reflection intensity. Then the crystals were mounted in the helium diffractometer sample holder and driven by means of a frequency modulation driving setup. Different crystal geometries were tested to obtain the best quality factor and preliminary measurements were performed on Kr films on gold surfaces. While the crystal structure and coverage of krypton films as a function of substrate temperature could successfully be determined, no depinning effects could be observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

1-nm-thick graphene tri-layer as the ultimate copper diffusion barrier

We demonstrate the thinnest ever reported Cu diffusion barrier, a 1-nm-thick graphene tri-layer. X-ray diffraction patterns and Raman spectra show that the graphene is thermally stable at up to 750 °C against Cu diffusion. Transmission electron microscopy images show that there was no inter-diffusion in the Cu/graphene/Si structure. Raman analyses indicate that the graphene may have degraded into a nanocrystalline structure at 750 °C. At 800 °C, the perfect carbon structure was damaged, and thus the barrier failed. The results of this study suggest that graphene could be the ultimate Cu interconnect diffusion barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure study of Ti{sub 50}Ni{sub 25}Fe{sub 25} powder produced by mechanical alloying

A nanostructured Ti{sub 50}Ni{sub 25}Fe{sub 25} phase (B2) was formed by mechanical alloying and its structural stability was studied as a function of pressure. The changes were followed by X-ray diffraction. The B2 phase was observed up to 7 GPa; for larger pressures, the B2 phase transformed into a trigonal/hexagonal phase (B19) that was observed up to the highest pressure used (18 GPa). Besides B2 and B19, elemental Ni or a SS-(Fe,Ni) and FeNi{sub 3} were observed. With decompression, the B2 phase was recovered. Using in situ angle-dispersive X-ray diffraction patterns, the single line method was applied to obtain the apparent crystallite size and the microstrain for both the B2 and the B19 phases as a function of the applied pressure. Values of the bulk modulus for the B2, B19, elemental Ni or SS-(Fe,Ni) and FeNi{sub 3} phases were obtained by fitting the pressure dependence of the volume to a Birch–Murnaghan equation of state (BMEOS)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of multiferroic behavior on flakes-like BiFeO{sub 3}

In present work, multiferroic BiFeO{sub 3} was synthesized by hydrothermal route. The rhombohedral structure was confirmed X-ray diffraction pattern and data fitted with Reitveld refinement using Full-Prof software suite. SEM micrograph shows flake like morphology. Frequency and temperature dependence of dielectric constant and dielectric loss were studied and detected enhancement in dielectric constant. The magnetic measurement indicates antiferromagnetic nature of BFO. P-E curve shows ferroelectic hysteresis loop with remanent polarization (2Pr) 0.3518 µC/cm{sup 2}. The dielectric anomaly observed near T{sub N} can be assigned to magnetoelectric coupling which is useful in device application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolutionary determination of experimental parameters for ptychographical imaging

The Ptychographical Iterative Engine (PIE) algorithm is a recently developed novel method of Coherent Diffractive Imaging (CDI) that uses multiple overlapping diffraction patterns to reconstruct an image. This method has successfully produced high quality reconstructions at both optical and X-ray wavelengths but the need for accurate knowledge of the probe positions is currently a limiting factor in the production of high resolution reconstructions at electron wavelengths. This paper examines the shape of the search landscape for producing optimal image reconstructions in the specific case of electron microscopy and then shows how evolutionary search methods can be used to reliably determine experimental parameters in the electron microscopy case (such as the spherical aberration in the probe and the probe positions).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and dielectric properties of Nd/Ca co-doped bi-ferrite multiferroics

Single-phase polycrystalline samples of Bi{sub 0.8}Nd{sub 0.2−x}Ca{sub x}FeO{sub 3} (x = 0.0, 0.1) were synthesized by chemical coprecipitation method. X-ray diffraction patterns accompanied by Rietveld-refined crystal structure parameters reveal the phase transition of Bi{sub 0.8}Nd{sub 0.1}Ca{sub 0.1}FeO{sub 3} with rhombohedral R3c symmetry to triclinic structure of Bi{sub 0.8}Nd{sub 0.2}FeO{sub 3} sample. Frequency dependence of dielectric constant (ε') and dielectric loss (tanδ), infers enhancement of both ε' (tanδ) in narrow band gap of Nd/Ca co-doped BFO as compare to wide band pristine BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substrate and orientation on charge ordering behaviors in epitaxial Pr{sub 0.5}Ca{sub 0.35}Sr{sub 0.15}MnO{sub 3} films

The charge ordering (CO) behaviors of Pr{sub 0.5}Ca{sub 0.35}Sr{sub 0.15}MnO{sub 3} films grown on STO(100), STO(110) and LAO(100) are systematically investigated by transport measurements and transmission electron microscopy (TEM) examinations. From the transport measurements, the CO transition temperatures of all the three films are much higher than those of the bulk materials, showing that the film strain could enhance the CO transition. From TEM observations, many superlattice spots appear in the electron diffraction patterns taken from the films, indicating the appearance of the CO modulation structures at room temperature. The modulation vectors are determined to be (1/2, 0, 0) for STO (100), (1/2, 1/2, 1/2) for STO (110), and both (0, 1/2, 0) and (1/2, 1/2, 0) for LAO (100). It is shown that both the substrate orientation and the film strain have a great effect on the CO modulation structures. The CO state is much easier to appear in the compressive strain direction which is due to the Mn-O-Mn angle tilting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and optical properties of Ni-doped CdS thin films prepared by chemical bath deposition method

The structural and optical behavior of undoped Cadmiun Sulphide (CdS) and Ni-doped CdS thinfilms prepared by Chemical Bath Deposition (CBD) technique is reported. The crystallite sizes of the thinfilms have been characterized by X-ray diffraction pattern (XRD). The particle sizes increase with the increase of Ni content in the CdS thinfilms. Scanning Electron Microscope (SEM) results indicated that CdS thinfilms is made up of aggregate of spherical-like particles. The composition was estimated by Energy Dispersive Analysis of X-ray (EDX) and reported. Spectroscopic studies revealed considerable improvement in transmission and the band gap of the films changes with addition of Ni dopant that is associated with variation in crystallite sizes in the nano regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High energy electron diffraction instrument with tunable camera length

Ultrafast electron diffraction (UED) stands as a powerful technique for real-time observation of structural dynamics at the atomic level. In recent years, the use of MeV electrons from radio frequency guns has been widely adopted to take advantage of the relativistic suppression of the space charge effects that otherwise limit the temporal resolution of the technique. Nevertheless, there is not a clear choice for the optimal energy for a UED instrument. Scaling to beam energies higher than a few MeV does pose significant technical challenges, mainly related to the inherent increase in diffraction camera length associated with the smaller Bragg angles. In this study, we report a solution by using a compact post-sample magnetic optical system to magnify the diffraction pattern from a crystal Au sample illuminated by an 8.2 MeV electron beam. Our method employs, as one of the lenses of the optical system, a triplet of compact, high field gradients (>500 T/m), small-gap (3.5 mm) Halbach permanent magnet quadrupoles. Shifting the relative position of the quadrupoles, we demonstrate tuning the magnification by more than a factor of two, a 6× improvement in camera length, and reciprocal space resolution better than 0.1 Å –1 in agreement with beam transport simulations.

47 OTHER INSTRUMENTATION↗

SPITZER/INFRARED ARRAY CAMERA LIMITS TO PLANETARY COMPANIONS OF FOMALHAUT AND {epsilon} ERIDANI

Fomalhaut and {epsilon} Eridani are two young, nearby stars that possess extended debris disks whose structures suggest the presence of perturbing planetary objects. With its high sensitivity and stable point-spread function, Spitzer/Infrared Array Camera (IRAC) is uniquely capable of detecting cool, Jupiter-like planetary companions whose peak emission is predicted to occur near 4.5 {mu}m. We report on deep IRAC imaging of these two stars, taken at 3.6 and 4.5 {mu}m using subarray mode and in all four channels in wider-field full array mode. Observations acquired at two different telescope roll angles allowed faint surrounding objects to be separated from the stellar diffraction pattern. No companion candidates were detected at the reported position of Fomalhaut b with 3{sigma} model-dependent mass upper limits of 3M {sub J} (for an age of 200 Myr). Around {epsilon} Eridani, we instead set a limit of 4 and {approx}<1M {sub J} (1 Gyr model age) at the inner and outer edge of the submillimeter debris ring, respectively. These results are consistent with non-detections in recent near-infrared imaging searches, and set the strongest limits to date on the presence of planets outside {epsilon} Eridani submillimeter ring.

99 GENERAL AND MISCELLANEOUS↗

Single-pulse resonant magnetic scattering using a soft x-ray free-electron laser

We report on single-pulse resonant magnetic scattering experiments using soft x-ray pulses generated by the free-electron laser FLASH at DESY. We could record a magnetic diffraction pattern from a Co/Pt multilayer sample at the Co M{sub 2,3} edge with a single 30-fs-long FEL pulse. The analysis of the magnetic small-angle scattering signal for subsequent pulses indicates a threshold energy density below which there is no indication that the magnetic properties of the sample might be altered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and morphological evolution of gallium nitride nanorods grown by chemical beam epitaxy

The morphological and structural evolution is presented for GaN nanorods grown by chemical beam epitaxy on (0001) Al{sub 2}O{sub 3} substrates. Their structural and optical properties are investigated by x-ray diffraction, scanning and transmission electron microscopy, and temperature-dependent photoluminescence measurements. While increasing the growth temperature and the flow rate of radio-frequency nitrogen radical, the three-dimensional growth mode will be enhanced to form one-dimensional nanostructures. The high density of well-aligned nanorods with a diameter of 30-50 nm formed uniformly over the entire sapphire substrate. The x-ray diffraction patterns and transmission electron microscopic images indicate that the self-assembled GaN nanorods are a pure single crystal and preferentially oriented in the c-axis direction. Particularly, the ''S-shape'' behavior with localization of {approx}10 meV observed in the temperature-dependent photoluminescence might be ascribed to the fluctuation in crystallographic defects and composition.

36 MATERIALS SCIENCE↗

Wehnelt photoemission in an ultrafast electron microscope: Stability and usability

We tested and compared the stability and usability of three different cathode materials and configurations in a thermionic-based ultrafast electron microscope: (1) on-axis thermionic and photoemission from a custom 100 μm diameter LaB 6 source with a graphite guard ring, (2) off-axis photoemission from the Ni aperture surface of the Wehnelt electrode, and (3) on-axis thermionic and photoemission from a custom 200 μm diameter polycrystalline Ta source. For each cathode type and configuration, including the Ni Wehnelt aperture, we illustrate how the photoelectron beam-current stability is deleteriously impacted by simultaneous cooling of the source following thermionic heating. Furthermore, we demonstrate usability via collection of parallel- and convergent-beam electron diffraction patterns and by formation of the optimum probe size. We find that usability of the off-axis Ni Wehnelt-aperture photoemission is at least comparable to on-axis LaB 6 thermionic emission, as well as to on-axis photoemission [the heretofore conventional approach to ultrafast electron microscopy (UEM) in thermionic-based instruments]. However, the stability and achievable beam currents for off-axis photoemission from the Wehnelt aperture were superior to that of the other cathode types and configurations, regardless of the electron-emission mechanism. Beam-current stability for this configuration was found to be ±1% (one standard deviation from the mean) for 70 min (longest duration tested), and steady-state beam current was reached within the sampling-time resolution used here (~1 s) for 15 pA beam currents (i.e., 460 electrons per packet for a 200 kHz repetition rate). Repeatability and robustness of the steady-state condition were also found to be within ±1% of the mean. We discuss the implications of these findings for UEM imaging and diffraction experiments, for pulsed-beam damage measurements, and for practical switching between optimum conventional TEM and UEM operation within the same instrument.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, vibrational and dielectric studies of (0.95)Pb(Zr{sub x}Ti{sub 1−x})O{sub 3}-(0.05)BiFeO{sub 3} nanoceramics

(0.95)Pb(Zr{sub x}Ti{sub 1−x})O{sub 3}-(0.05)BiFeO{sub 3} nanoceramics with x=0.51, 0.53 and 0.55 were synthesized by sol-gel route. Rietveld refined X-ray powder diffraction pattern of the samples confirm the single phase formation of compounds with tetragonal structure (P4mm). FT-IR studies revealed that slight shift of phonon modes towards the lower wave number and increase in the bond length with increasing Zr{sup 4+} concentration. Room temperature dielectric properties of system revealed that relaxor characteristics of these samples. Ferroelectric hysteresis curve shows the decrease in polarization values with Zr concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanorods and nanoparticles of titanium dioxide and their use in dye sensitized solar cells

Mesoporous TiO{sub 2} nanorods/nanorods were successfully synthesized by hydrothermal process at 170 °C for 72 hr. The powder X-ray diffraction pattern shows large fraction of anatase phase with good crystalline behavior of the prepared materials. The specific surface area and pore volume of the synthesized material are about 84.83 m{sup 2}/g and 0.1316 cc/g respectively. The morphological results show that the TiO{sub 2} nanorods had diameter of ~ 25 nm and the length of ~ 80 nm. The nanoparticles have 20 nm in size. The current-voltage curve shows that the synthesized TiO{sub 2} nanostructure results in 36.7 % higher solar cell efficiency than commercial P25.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of thermal stability of Cu{sub 2}Se thermoelectric material

Sustainability of thermoelectric parameter in operating temperature range is a key consideration factor for fabricating thermoelectric generator or cooler. In present work, we have studied the stability of thermoelectric parameter of Cu{sub 2}Se within the temperature range of 50-800°C. Temperature dependent Seebeck coefficients and electrical resistivity measurement are performed under three continuous thermal cycles. X-ray diffraction pattern shows the presence of mixed cubic-monoclinic Cu{sub 2}Se phase in bare pellet which transforms to pure α-Cu{sub 2}Se phase with repeating thermal cycle. Significant enhancement in Seebeck coefficient and electrical resistivity is observed which may be attributed to (i) Se loss observed in EDS and (ii) the phase transformation from mixed cubic-monoclinic structure to pure monoclinic α-Cu{sub 2}Se phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗