Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Photoluminescence and cathodoluminescence properties of Eu{sup 3+} ions activated AMoO{sub 4} (A = Mg, Ca, Sr, Ba) phosphors

Highlights: • Under 393 nm excitation, strong red emission located at 615 nm was observed in all the samples. • The Eu{sup 3+}-activated CaMoO{sub 4} phosphor exhibited the strongest PL properties. • The CIE chromaticity coordinate of Eu{sup 3+}-activated CaMoO{sub 4} phosphor was (0.647,0.352). • The color purity of Eu{sup 3+}-activated CaMoO{sub 4} phosphor was 92.8%. • Strong CL properties were observed in the Eu{sup 3+}-activated CaMoO{sub 4} phosphor. - Abstract: Eu{sup 3+}-activated AMoO{sub 4} (A = Mg, Ca, Sr, Ba) phosphors were synthesized by a solid-state reaction method. Photoluminescence and cathodoluminescence (CL) spectra as well as X-ray diffraction patterns were measured to characterize the fabricated samples. Under 393 nm excitation, strong red emissions located at ∼615 nm corresponding to the {sup 5}D{sub 0} → {sup 7}F{sub 2} transition of Eu{sup 3+} ions were observed in all the samples. Compared with other Eu{sup 3+} ions activated AMoO{sub 4} (A = Mg, Sr, Ba) phosphors, Eu{sup 3+}-activated CaMoO{sub 4} phosphor exhibited the strongest red emission intensity with better Commission Internationale de L’Eclairage chromaticity coordinate and higher color purity. Furthermore, the CL results indicated that the Eu{sup 3+}-activated CaMoO{sub 4} phosphor had excellent luminescence properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic nitrogen doping and p-type conduction in SnO{sub 2}

We report the atomic N-doped SnO{sub 2} films with p-type conduction grown via reactive sputtering at high nitrogen partial pressure. From the high-resolution x-ray photoelectron spectroscopy (XPS) and x-ray diffraction patterns, it is deduced that the N 1s with binding energy of 397 eV could be attributed to the atomic N in the SnO{sub 2} films. In addition, the results of Hall effect measurement indicate that the atomic N incorporated substitutionally at O sites act as acceptors, which is responsible for the p-type conduction of the N-doped SnO{sub 2} films. It is believed that these findings should stimulate further research on p-type SnO{sub 2} films and SnO{sub 2}-based ultraviolet optoelectronic devices.

36 MATERIALS SCIENCE↗

Structural and optical properties of (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin film alloys

The structural and optical properties of pentenary alloy (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin films were characterized over the entire compositional range at a fixed (Cu + Ag)/(In + Ga) ratio. Films deposited at 550 °C on bare and molybdenum coated soda-lime glass by elemental co-evaporation in a single-stage process with constant incident fluxes exhibit single phase chalcopyrite structure, corresponding to 122 spacegroup (I-42d) over the entire compositional space. Unit cell refinement of the diffraction patterns show that increasing Ag substitution for Cu, the refined a{sub o} lattice constant, (Ag,Cu)-Se bond length, and anion displacement increase in accordance with the theoretical model proposed by Jaffe, Wei, and Zunger. However, the refined c{sub o} lattice constant and (In,Ga)-Se bond length deviated from theoretical expectations for films with mid-range Ag and Ga compositions and are attributed to influences from crystallographic bond chain ordering or cation electronegativity. The optical band gap, derived from transmission and reflection measurements, widened with increasing Ag and Ga content, due to influences from anion displacement and cation electronegativity, as expected from theoretical considerations for pseudo-binary chalcopyrite compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High temperature phase stability in Li{sub 0.12}Na{sub 0.88}NbO{sub 3}: A combined powder X-ray and neutron diffraction study

The phase stabilities of ecofriendly piezoelectric material of lithium doped sodium niobate for composition Li{sub 0.12}Na{sub 0.88}NbO{sub 3} (LNN12) have been investigated by a combination of powder X-ray and neutron diffraction techniques in the temperature range of 300–1100 K. We observed interesting changes with appearance or disappearance of the super-lattice reflections in the powder diffraction patterns. Unambiguous experimental evidence is shown for coexistence of paraelectric and ferroelectric orthorhombic phases in the temperature range of 525 K to 675 K. We identified the correct crystal structure of LNN12 with temperature and correlated it with observed anomaly in the physical properties. Identification of crystal structure also helps in the mode assignments in Raman and infrared spectroscopies. We argued that application of chemical pressure as a result of Li substitution in NaNbO{sub 3} matrix favors the freezing of zone centre phonons in contrast to the freezing of zone boundary phonons in pure NaNbO{sub 3} with the variation of temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies of electrical conductivity and complex initial permeability of multiferroic xBa{sub 0.95}Sr{sub 0.05}TiO{sub 3}-(1-x)BiFe{sub 0.90}Gd{sub 0.10}O{sub 3} ceramics

Multiferroic xBa{sub 0.95}Sr{sub 0.05}TiO{sub 3}-(1-x)BiFe{sub 0.90}Gd{sub 0.10}O{sub 3} [xBST-(1-x)BFGO] (x = 0.00, 0.10 and 0.20) ceramics were prepared by the standard solid-state reaction technique. Crystal structure of the ceramics was determined by X-ray diffraction pattern. All the compositions exhibited rhombohedral crystal structure. The tolerance factor ‘t’ varied from 0.847 to 0.864. The AC conductivity spectrum followed the Jonscher’s power law. The Nyquist plots indicated that only grains have the contribution to the resistance in this material and the values of grain resistance (R{sub g}) increased with BST content. The real part of complex initial permeability decreased with the increase in frequency and increased with increasing BST content. Magnetoelectric coefficient was determined for all compositions. The maximum value of magnetoelectric coefficient was found to be 1.467 mV.cm{sup −1}.Oe{sup −1} for x = 0.20.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and transport properties of RCr{sub 0.3}Ge{sub 2} (R=Tb, Dy, Ho and Er) compounds

The magnetic and transport properties of ternary rare-earth chromium germanides RCr{sub 0.3}Ge{sub 2} (R=Y and Tb-Er) have been determined. X-ray and neutron diffraction studies indicate that these compounds have the CeNiSi{sub 2}-type structure (space group Cmcm) . Magnetic measurements reveal the antiferromagnetic ordering below T{sub N} equal to 18.5 K (R=Tb), 11.8 K (Dy), 5.8 K (Ho) and 3.4 K (Er). From the neutron diffraction data the magnetic structures have been determined. For TbCr{sub 0.3}Ge{sub 2} and DyCr{sub 0.3}Ge{sub 2} at low temperatures the magnetic ordering can be described by two vectors k{sub 1}=(1/2 ,0,0) and k{sub 2}=(1/4 ,0,1/4), and k{sub 1}'=(1/2 ,0,0) and k{sub 2}'=(1/2 ,0,1/2), respectively. In HoCr{sub 0.3}Ge{sub 2} and ErCr{sub 0.3}Ge{sub 2} the ordering can be described by one propagation vector equal to (1/2 ,1/2 ,0) and (0,0,0.4187(2)), respectively. In DyCr{sub 0.3}Ge{sub 2} some change in the magnetic ordering is observed at T{sub t}=5.1 K. In temperature range from T{sub t} to T{sub N} the magnetic ordering is given by one propagation vector k=(1/2 ,0,0). YCr{sub 0.3}Ge{sub 2} is a Pauli paramagnet down to 1.72 K which suggests that in the entire RCr{sub 0.3}Ge{sub 2} series the Cr atoms do not carry magnetic moments. All compounds studied exhibit metallic character of the electrical conductivity. The temperature dependencies of the lattice parameters reveal strong magnetostriction effect at the respective Neel temperatures. -- Graphical abstract: In the neutron diffraction pattern of TbCr{sub 0.3}Ge{sub 2} compound collected at 1.5 K the additional peaks of magnetic origin form two groups. The first one, with strong intensities, can be indexed by the propagation vector k=(1/2 ,0,0) (a), while the second one, with small intensities, can be described by the propagation vector k=(1/4 ,0,1/4) (b). The analysis of the magnetic peak intensities indicates that the Tb magnetic moments located at the positions Tb1 (0,y,1/4), Tb2 (0,-y,3/4), Tb3 (1/2 ,1/2 +y,1/4) and Tb4 (1/2 ,1/2 -y,3/4) form a collinear structure with the (+ + - -) sequence in the crystallographic unit cell for the first component and (- + + -) for the second. Display Omitted

36 MATERIALS SCIENCE↗

Mirrorlike pulsed laser deposited tungsten thin film

Mirrorlike tungsten thin films on stainless steel substrate deposited via pulsed laser deposition technique in vacuum (10{sup -5} Torr) is reported, which may find direct application as first mirror in fusion devices. The crystal structure of tungsten film is analyzed using x-ray diffraction pattern, surface morphology of the tungsten films is studied with scanning electron microscope and atomic force microscope. The film composition is identified using energy dispersive x-ray. The specular and diffuse reflectivities with respect to stainless steel substrate of the tungsten films are recorded with FTIR spectra. The thickness and the optical quality of pulsed laser deposition deposited films are tested via interferometric technique. The reflectivity is approaching about that of the bulk for the tungsten film of thickness {approx}782 nm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phase transition sequence in sodium bismuth titanate observed using high-resolution x-ray diffraction

High resolution powder x-ray diffraction patterns of Na{sub 0.5}Bi{sub 0.5}TiO{sub 3} at selected temperatures were examined to compare structural changes with observed piezoelectric thermal depoling temperatures. The depoling temperatures do not correlate with discrete phase transition temperatures, and therefore, a structural transition is not the origin of thermal depoling. Rather, a correlation is made with an increase in volume fraction of material which does not obey the long-range Cc space group. The origin of the thermal depoling behavior may be the loss of long-range ferroelectric order by a decreasing proportion of the Cc phase or the associated percolation of disordered nano-scale platelets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

(001) Oriented piezoelectric films prepared by chemical solution deposition on Ni foils

Flexible metal foil substrates are useful in some microelectromechanical systems applications including wearable piezoelectric sensors or energy harvesters based on Pb(Zr,Ti)O₃ (PZT) thin films. Full utilization of the potential of piezoelectrics on metal foils requires control of the film crystallographic texture. In this study, (001) oriented PZT thin films were grown by chemical solution deposition (CSD) on Ni foil and Si substrates. Ni foils were passivated using HfO₂ grown by atomic layer deposition in order to suppress substrate oxidation during subsequent thermal treatment. To obtain the desired orientation of PZT film, strongly (100) oriented LaNiO₃ films were integrated by CSD on the HfO₂ coated substrates. A high level of (001) LaNiO₃ and PZT film orientation were confirmed by X-ray diffraction patterns. Before poling, the low field dielectric permittivity and loss tangents of (001) oriented PZT films on Ni are near 780 and 0.04 at 1 kHz; the permittivity drops significantly on poling due to in-plane to out-of-plane domain switching. (001) oriented PZT film on Ni displayed a well-saturated hysteresis loop with a large remanent polarization ~36 μC/cm², while (100) oriented PZT on Si showed slanted P-E hysteresis loops with much lower remanent polarizations. The |e{sub 31,f}| piezoelectric coefficient was around 10.6 C/m² for hot-poled (001) oriented PZT film on Ni.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chrystal structure properties of Al-doped Li{sub 4}Ti{sub 5}O{sub 12} synthesized by solid state reaction method

This research aim is to analyze the effect of Aluminum (Al) doping in the structural properties of Al-doped Li{sub 4}Ti{sub 5}O{sub 12} as anode in lithium ion battery. Al-doped Li{sub 4}Ti{sub 5}O{sub 12} powders were synthesized by solid state reaction method. LiOH.H{sub 2}O, TiO{sub 2}, and Al{sub 2}O{sub 3} were raw materials. These materials were milled for 15 h, calcined at temperature of 750{sup o}C and sintered at temperature of 800{sup o}C. Mole percentage of doping Al (x) was varied at x=0; x=0.025; and x =0.05. Al-doped Li{sub 4}Ti{sub 5}O{sub 12} powders were synthesized by solid state reaction method. X-ray diffraction was employed to determine the structure of Li{sub 4}Ti{sub 5}O{sub 12}. The PDXL software was performed on the x-ray diffraction data to estimate the phase percentage, the lattice parameter, the unit cell volume, and the crystal density. Al-doped Li{sub 4}Ti{sub 5}O{sub 12} has cubic crystal structure. Al-doping at x=0 and x=0.025 does not change the phase as Li{sub 4}Ti{sub 5}O{sub 12} while at x=0.050 the phase changes to the LiTiAlO{sub 4}. The diffraction patterns show that the angle shifted to the right as the increase of x which indicated that Al substitute Ti site. Percentage of Li{sub 4}Ti{sub 5}O{sub 12} phase at x=0 and x=0.025 was 97.8% and 96.8%, respectively. However, the lattice parameters, the unit cell volume, and the crystal density does not change significantly at x=0; x=0.025; and x=0.050. Based on the percentage of Li{sub 4}Ti{sub 5}O{sub 12} phase, the Al-doped Li at x=0 and x=0.025 is promising as a lithium battery anode.

36 MATERIALS SCIENCE↗

Single-crystal synchrotron X-ray diffraction study of wustite and magnesiowustite at lower-mantle pressures

This study demonstrates the use of monochromatic synchrotron X-ray radiation of 40 keV for high-precision equation-of-state studies on sets of single crystals analysed individually in the same diamond-anvil pressure cell. Angle-dispersive zone-axis diffraction patterns were obtained from crystals of wuestite-Fe{sub 0.93}O and magnesiowuestite-(Mg{sub 0.73}Fe{sub 0.27})O to 51 GPa in a hydrostatic helium pressure medium. The rhombohedral phase of Fe{sub 0.93}O was observed above 23 GPa, and its isothermal bulk modulus (K{sub 0}) was determined to be 134 ({+-}4) GPa, assuming K' = 4. The rhombohedral phase of Fe{sub 0.93}O is more compressible than B1-structured Fe{sub 0.93}O, with K{sub 0} = 146 ({+-}2) GPa. Magnesiowuestite-(Mg{sub 0.73}Fe{sub 0.27})O remains cubic over the experimental pressure range, and has a bulk modulus of 154 ({+-}3) GPa with K' = 4.0 ({+-}0.1).

43 PARTICLE ACCELERATORS↗

Effect of Mn doping on structural and magnetic susceptibility of C-type rare earth nano oxides Er{sub 2−x}Mn{sub x}O{sub 3}

Graphical abstract: Display Omitted Highlights: ► Er{sub 2−x}Mn{sub x}·O{sub 3} (0.0 ≤ x ≤ 0.20) prepared by sol–gel method. ► The change in lattice parameter is not linear with x due to the change in crystallite size with doping. ► Anomalous concentration dependence is found in magnetic susceptibility. ► The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x. ► Superexchange interactions between Er ions depending on the amount of Mn or Er in different sites. -- Abstract: The manganese doped rare earth oxides Er{sub 2−x}Mn{sub x} O{sub 3} (0.0 ≤ x ≤ 0.20) were synthesized by a sol–gel process and analyzed by X-ray diffraction using Rietveld refinement methods. A single phase solid solution is formed up to x = 0.15 while for x ≥ 0.2 a manganese oxide phase appears in the diffraction pattern. Preferential cationic distribution between the non-equivalent sites 8b and 24d of space group Ia3{sup ¯} is found for all samples but to a different extent. The octahedral volume and average bond length of Er{sub 1}-O for 8b site decrease while both octahedral volume and bond length of Er{sub 2}-O for 24d site increase. Magnetization measurements were done in the temperature range 5–300 K. The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x, except for sample x = 0.05 where the magnetization is enhanced. The Curie-Weiss paramagnetic temperatures indicate antiferromagnetic interaction.

36 MATERIALS SCIENCE↗

A simple method to fabricate an NIR detector by PbTe nanowires in a large scale

Highlights: • PbTe nanowires were grown by tellurization of the Pb sheets for the first time. • It was observed a band gap value for the PbTe nanostructures in the NIR region. • NIR detector was fabricated in a large scale using a simple method. • Effect of Te concentration on morphology of PbTe nanostructures was investigated. - Abstract: A simple method was used to fabricate a near-infrared (NIR) detector using PbTe nanostructures. Samples were synthesized by tellurization of lead sheets in a tube furnace. PbTe nanostructures with wires and flakes shapes were grown on the lead sheets that were placed at 300 and 330 °C, respectively, while, PbTe nanoporous were grown at 360 and 390 °C. X-ray diffraction patterns and X-ray photoelectron spectra results indicated that, the PbTe phase was formed in all samples. UV–vis diffuse reflectance spectra measurements showed a band gap for the PbTe nanostructures in the near-infrared region of the electromagnetic spectrum. Actually, the results indicated that, the band gap values of the PbTe nanowires and nanoporous were 1.54 eV and 1.61 eV, respectively. Finally, the PbTe nanostructures were used as a simple photoresponse device under a red light source. The photoresponse results revealed, PbTe nanowires are promising for photoelectrical applications in the NIR region.

36 MATERIALS SCIENCE↗

Radiation comb generation with extended Josephson junctions

We propose the implementation of a Josephson radiation comb generator based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a π-jump to minimize the Josephson energy. Correspondingly, a voltage pulse is generated at the extremes of the junction. Under periodic driving, this allows us to produce a comb-like voltage pulses sequence. In the frequency domain, it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical, and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to 10 pW at 50 GHz for a driving frequency of 100 MHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray and neutron diffraction study of the defect crystal structure of the as-grown nonstoichiometric phase Y{sub 0.715}Ca{sub 0.285}F{sub 2.715}

This work begins a series of papers aimed at studying the defect structure of nonstoichiometric phases R{sub 1-y}Ca{sub y}F{sub 3-y} with a tysonite-type (LaF{sub 3}) structure. In the single-crystal structure of Y{sub 0.715}Ca{sub 0.285}F{sub 2.715} with a tysonite-type small unit cell (sp. gr. P6{sub 3}/mmc, a = 3.9095(2) A, c = 6.9829(2) A; Z = 2; R{sub w} = 2.16%), the displacements of Y{sup 3+} cations and F{sup 2-} anions from 6{sub 3} symmetry axes were observed for the first time. The X-ray diffraction pattern shows weak satellites insufficient for structural calculations. The LaF{sub 3} structure type is stabilized up and down on the temperature scale due to anion vacancies and the symmetrizing effect of Ca{sup 2+} cations lying on 6{sub 3} symmetry axes. At 120 Degree-Sign C the fluoride-ion conductivity in the nonstoichiometric phase Y{sub 0.715}Ca{sub 0.285}F{sub 2.715} is five orders of magnitude higher than that in the stoichiometric phase {beta}-YF{sub 3}. The transition to a superionic state is caused by a deviation from stoichiometry and is not associated with reconstructive phase transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Uptake of chloride and carbonate ions by calcium monosulfoaluminate hydrate

Decommissioning of old nuclear reactors may produce waste streams containing chlorides and carbonates, including radioactive {sup 36}Cl{sup -} and {sup 14}CO{sub 3}{sup 2-}. Their insolubilization by calcium monosulfoaluminate hydrate was investigated. Carbonates were readily depleted from the solution, giving at thermodynamic equilibrium monocarboaluminate, monocarboaluminate + calcite, or calcite only, depending on the initial ratio between the anion and calcium monosulfoaluminate hydrate. Chloride ions reacted more slowly and were precipitated as Kuzel's salt, Kuzel's and Friedel's salts, or Friedel's salt only. Rietveld refinement of X-Ray powder diffraction patterns was successfully used to quantify the phase distributions, which were compared to thermodynamic calculations. Moreover, analysing the lattice parameters of Kuzel's salt as a function of its chloride content showed the occurrence of a restricted solid solution towards the sulfate side with general formula 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}xCaCl{sub 2}{center_dot}(1 - x)CaSO{sub 4}{center_dot}(12 - 2x){center_dot}H{sub 2}O (0.36 {<=} x {<=} 0.50).

36 MATERIALS SCIENCE↗

X-ray diffraction from shock driven Sn microjets

Here, in situ x-ray diffraction was performed on shock-generated microjets composed of Sn and Sn–4Ag. Under low pressure drives (~21 GPa), a significant fraction of the jet volume was found to be in the β-Sn phase, and these crystallites were much smaller than the initial grain size of the material. Significant quantities of amorphous (molten) material were observed for higher drive pressures (~25–35 GPa). The extent of melting at these pressures was greater than would be predicted for uniaxial shock loading. Diffraction patterns from the Sn–4Ag alloy showed a peak that is consistent with the expected Ag 3 Sn intermetallic phase. This peak remained evident under drive conditions where the sample was otherwise fully amorphous. This indicates a slushy or a mixed phase of liquid Sn and solid Ag 3 Sn. Given the eutectic character of this alloy, this observation is attributed to a kinetic limitation on the dissolution of Ag 3 Sn. This implies that a much broader range of drive conditions will lead to mixed phase jets and ejecta than would be predicted from the equilibrium melt boundary of such alloys.

36 MATERIALS SCIENCE↗

Advanced electron microscopic techniques applied to the characterization of irradiation effects and fission product identification of irradiated TRISO coated particles from the AGR-1 experiment

Preliminary electron microscopy of coated fuel particles from the AGR-1 experiment was conducted using characterization techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and wavelength dispersive spectroscopy (WDS). Microscopic quantification of fission-product precipitates was performed. Although numerous micro- and nano-sized precipitates observed in the coating layers during initial SEM characterization of the cross-sections, and in subsequent TEM diffraction patterns, were indexed as UPd{sub 2}Si{sub 2}, no Ag was conclusively found. Additionally, characterization of these precipitates highlighted the difficulty of measuring low concentrations of Ag in precipitates in the presence of significantly higher concentrations of Pd and U. The electron microscopy team followed a multi-directional and phased approach in the identification of fission products in irradiated TRISO fuel. The advanced electron microscopy techniques discussed in this paper, not only demonstrate the usefulness of the equipment (methods) as relevant research tools, but also provide relevant scientific results which increase the knowledge about TRISO fuel particles microstructure and fission products transport.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗