Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Chandra observations of eight sources discovered by INTEGRAL

We report on 0.3–10 keV observations with the Chandra X-ray Observatory of eight hard X-ray sources discovered within 8° of the Galactic plane by the International Gamma-ray Astrophysics Laboratory satellite. The short (∼5 ks) Chandra observations of the IGR source fields have yielded very likely identifications of X-ray counterparts for three of the IGR sources: IGR J14091–6108, IGR J18088–2741, and IGR J18381–0924. The first two have very hard spectra in the Chandra band that can be described by a power law with photon indices of Γ = 0.6 ± 0.4 and –0.7{sub −0.3}{sup +0.4}, respectively (90% confidence errors are given), and both have a unique near-IR counterpart consistent with the Chandra position. IGR J14091–6108 also displays a strong iron line and a relatively low X-ray luminosity, and we argue that the most likely source type is a cataclysmic variable (CV), although we do not completely rule out the possibility of a high mass X-ray binary. IGR J18088–2741 has an optical counterpart with a previously measured 6.84 hr periodicity, which may be the binary orbital period. We also detect five cycles of a possible 800–950 s period in the Chandra light curve, which may be the compact object spin period. We suggest that IGR J18088–2741 is also most likely a CV. For IGR J18381–0924, the spectrum is intrinsically softer with Γ=1.5{sub −0.4}{sup +0.5}, and it is moderately absorbed, N{sub H} = (4 ± 1) × 10{sup 22} cm{sup −2}. There are two near-IR sources consistent with the Chandra position, and they are both classified as galaxies, making it likely that IGR J18381–0924 is an active galactic nucleus. For the other five IGR sources, we provide lists of nearby Chandra sources, which may be used along with further observations to identify the correct counterparts, and we discuss the implications of the low inferred Chandra count rates for these five sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparative evaluation of ERTS-A imagery for resource inventory in land use planning

There are no author-identified significant results in this report. Evaluation has begun on ERTS-1 imagery of Crook County for use in landform interpretation and geologic mapping and interpretation. Outside of Crook County the geology team has been impressed by the display of fault patterns in southeastern Oregon and has begun preliminary analyses of these. Using the color combiner a complete timber type map of (1) all the forest land within Crook County, and (2) all the Ochoco National Forest has been completed. The timber types consist of five density classes which are correlated with different species compositions as the first step in the multistage forest inventory. Using the ERTS magnetic tape data the computer center has produced a 12 by 25 mile strip printout of bands 5, 6, and 7. The computer printouts are to be analyzed for different timber types and possible insect damage. Other results are: (1) limited number of clearcuts in eastern Oregon and in Cascades evident; (2) positive transparencies of band 5 appear to be too dark for maximum information of forested areas; and (3) much more information in the computer printouts of bands 6 and 7, than 5, when analyzing forest conditions.

Simonson, G. H.↗

Software techniques for image processing

The present paper describes several software techniques that can be used to get the 'most' out of an image without destroying or adding any information. A simple overview is given of a general image-processing system, a number of systems in current use are listed, and three types of processing tasks are delineated: image diagnostics, subjective enhancement, and quantitative restoration. Examples of each of these types are discussed in some detail, including histogram, differences, and Fourier analysis for image diagnostics; contrast stretching, edge enhancement, and pseudocolor displays for subjective enhancement; and photometric correction, contouring, and geometric correction for quantitative restoration.

Klinglesmith, D. A.↗

Investigation of mesoscale cloud features viewed by LANDSAT

The author has identified the following significant results. Some 50 LANDSAT images displaying mesoscale cloud features were analyzed. This analysis was based on the Rayleigh-Kuettner model describing the formation of that type of mesoscale cloud feature. This model lends itself to computation of the average wind speed in northerly flow from the dimensions of the cloud band configurations measured from a LANDSAT image. In nearly every case, necessary conditions of a curved wind profile and orientation of the cloud streets within 20 degrees of the direction of the mean wind in the convective layer were met. Verification of the results by direct observation was hampered, however, by the incompatibility of the resolution of conventional rawinsonde observations with the scale of the banded cloud patterns measured from LANDSAT data. Comparison seems to be somewhat better in northerly flows than in southerly flows, with the largest discrepancies in wind speed being within 8m/sec, or a factor of two.

Sherr, P. E.↗

Landsat-1 imagery for geologic evaluation

The paper reviews the geologic evaluation of the North Carolina coastal plain using Landsat-1 imagery as related to a general study of the geomorphology to assess the imagery as a tool for upgrading the understanding of the coastal plain, along with recognition of subsurface structures. Among the more prominent features displayed on the Landsat imagery are the scarps and beach ridges associated with former positions of the shoreline. Compilations of various types of lineaments reveal two dominant trends, one northwest-southeast and the other northeast-southwest, which are significant in the tectonic development of the Atlantic Coastal Plain. The synoptic view recorded by the satellite allows a perspective that aids geologic studies of the Atlantic Coastal Plain.

Welby, C. W.↗

Optimal guidance and control for investigating aircraft noise-impact reduction

A methodology for investigating the reduction of community noise impact is reported. This report is concerned with the development of two models to provide data: a guidance generator and an aircraft control generator suitable for various current and advanced types of aircraft. The guidance generator produces the commanded path information from inputs chosen by an operator from a graphic scope display of a land-use map of the terminal area. The guidance generator also produces smoothing at the junctions of straight-line paths.The aircraft control generator determines the optimal set of the available controls such that the aircraft will follow the commanded path. The solutions for the control functions are given and shown to be dependent on the class of aircraft to be considered, that is, whether the thrust vector is rotatable and whether the thrust vector affects the aerodynamic forces. For the class of aircraft possessing a rotatable thrust vector, the solution is redundant; this redundancy is removed by the additional condition that the noise inpact be minimized. Information from both the guidance generator and the aircraft control generator is used by the footprint program to construct the noise footprint.

Stewart, E. C.↗

High-speed laser anemometer system for intrarotor flow mapping in turbomachinery

A fringe-type laser anemometer with innovative features is described. The innovative features include: (1) rapid, efficient data acquisition processes, (2) detailed graphic display of data being accumulated, and (3) input laser-beam positioning that allows greater optical access to the intrarotor region. Results are presented that demonstrate the anemometer's capability in flow mapping within a transonic axial-flow compressor rotor.

Powell, J. A.↗

A comparative study of some mathematical models of the mean wind structure and aerodynamic drag of plant canopies

A semianalytical method for describing the mean wind profile and shear stress within plant canopies and for estimating the roughness length and the displacement height is presented. This method incorporates density and vertical structure of the canopy and includes simple parameterizations of the roughness sublayer and shelter factor. Some of the wind profiles examined are consistent with first-order closure techniques while others are consistent with second-order closure techniques. Some profiles show a shearless region near the base of the canopy; however, none displays a secondary maximum there. Comparing several different analytical expressions for the canopy wind profile against observations suggests that one particular type of profile (an Airy function which is associated with the triangular foliage surface area density distribution) is superior to the others. Because of the numerical simplicity of the methods outlined, it is suggested that they may be profitably used in large-scale models of plant-atmosphere exchanges.

Massman, William↗

Structure-property relationships in directionally solidified single crystal NiAl

The ordered intermetallic alloy NiAl is being considered as a potential high temperature structural material, but lack of ductility at ambient temperatures, especially in polycrystalline form, is presently a major obstacle in achieving this goal. Even general agreement of the intrinsic ductility that can be achieved in monocrystals is in dispute. In order to understand this problem, two directionally solidified ingots of NiAl which displayed known differences in ductility were characterized in sufficient detail to identify the corresponding microstructural differences. It was found that the type and size of casting defects, i.e., porosity, present in the material were the major factors in controlling ductility of NiAl single crystals and could explain the order of magnitude variance in fracture strains reported in the literature.

Noebe, R. D.↗

Mechanical properties of modified low cobalt powder metallurgy Udimet 700 type alloys

Eight superalloys derived from Udimet 700 were prepared by powder metallurgy, hot isostatically pressed, heat treated and their tensile and creep rupture properties determined. Several of these alloys displayed properties superior to those of Udimet 700 similarly prepared, in one case exceeding the creep rupture life tenfold. Filter clogging by extracted gamma prime, its measurement and significance are discussed in an appendix.

Harf, Fredric H.↗

A 4.1 keV spectral feature in a type 1 X-ray burst from EXO 1747-214

A spectral analysis of two type 1 bursts from EXO 1747-214 detected by Exosat is presented. During the rise of the strongest burst, the spectrum display a spectral feature which is well represented by an absorption line at 4.05 + or - 0.12 keV with an equivalent width of 570 + or - 87 eV and an upper limit to the line width at 800 eV. At all other times, the spectrum is well represented by that of a single blackbody. The observed line energy is compared with those observed in other burst and the possible origins of these lines are discussed.

Magnier, Eugene↗

Two genetically separable phases of growth inhibition induced by blue light in Arabidopsis seedlings

High fluence-rate blue light (BL) rapidly inhibits hypocotyl growth in Arabidopsis, as in other species, after a lag time of 30 s. This growth inhibition is always preceded by the activation of anion channels. The membrane depolarization that results from the activation of anion channels by BL was only 30% of the wild-type magnitude in hy4, a mutant lacking the HY4 BL receptor. High-resolution measurements of growth made with a computer-linked displacement transducer or digitized images revealed that BL caused a rapid inhibition of growth in wild-type and hy4 seedlings. This inhibition persisted in wild-type seedlings during more than 40 h of continuous BL. By contrast, hy4 escaped from the initial inhibition after approximately 1 h of BL and grew faster than wild type for approximately 30 h. Wild-type seedlings treated with 5-nitro-2-(3-phenylpropylamino)-benzoic acid, a potent blocker of the BL-activated anion channel, displayed rapid growth inhibition, but, similar to hy4, these seedlings escaped from inhibition after approximately 1 h of BL and phenocopied the mutant for at least 2.5 h. The effects of 5-nitro-2-(3-phenylpropylamino)-benzoic acid and the HY4 mutation were not additive. Taken together, the results indicate that BL acts through HY4 to activate anion channels at the plasma membrane, causing growth inhibition that begins after approximately 1 h. Neither HY4 nor anion channels appear to participate greatly in the initial phase of inhibition.

Non-NASA Center↗

Static and Motion-Based Visual Features Used by Airport Tower Controllers: Some Implications for the Design of Remote or Virtual Towers

Visual motion and other visual cues are used by tower controllers to provide important support for their control tasks at and near airports. These cues are particularly important for anticipated separation. Some of them, which we call visual features, have been identified from structured interviews and discussions with 24 active air traffic controllers or supervisors. The visual information that these features provide has been analyzed with respect to possible ways it could be presented at a remote tower that does not allow a direct view of the airport. Two types of remote towers are possible. One could be based on a plan-view, map-like computer-generated display of the airport and its immediate surroundings. An alternative would present a composite perspective view of the airport and its surroundings, possibly provided by an array of radially mounted cameras positioned at the airport in lieu of a tower. An initial more detailed analyses of one of the specific landing cues identified by the controllers, landing deceleration, is provided as a basis for evaluating how controllers might detect and use it. Understanding other such cues will help identify the information that may be degraded or lost in a remote or virtual tower not located at the airport. Some initial suggestions how some of the lost visual information may be presented in displays are mentioned. Many of the cues considered involve visual motion, though some important static cues are also discussed.

Ellis, Stephen R.↗

Overview of Neutrino Mixing Models and Ways to Differentiate among Them

An overview of neutrino-mixing models is presented with emphasis on the types of horizontal flavor and vertical family symmetries that have been invoked. Distributions for the mixing angles of many models are displayed. Ways to differentiate among the models and to narrow the list of viable models are discussed.

Albright, Carl H.↗

Overview of Neutrino Mixing Models and Their Mixing Angle Predictions

An overview of neutrino-mixing models is presented with emphasis on the types of horizontal flavor and vertical family symmetries that have been invoked. Distributions for the mixing angles of many models are displayed. Ways to differentiate among the models and to narrow the list of viable models are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New High-Performance SiC Fiber Developed for Ceramic Composites

Sylramic-iBN fiber is a new type of small-diameter (10-mm) SiC fiber that was developed at the NASA Glenn Research Center and was recently given an R&D 100 Award for 2001. It is produced by subjecting commercially available Sylramic (Dow Corning, Midland, MI) SiC fibers, fabrics, or preforms to a specially designed high-temperature treatment in a controlled nitrogen environment for a specific time. It can be used in a variety of applications, but it currently has the greatest advantage as a reinforcement for SiC/SiC ceramic composites that are targeted for long-term structural applications at temperatures higher than the capability of metallic superalloys. The commercial Sylramic SiC fiber, which is the precursor for the Sylramic-iBN fiber, is produced by Dow Corning, Midland, Michigan. It is derived from polymers at low temperatures and then pyrolyzed and sintered at high temperatures using boron-containing sintering aids (ref. 1). The sintering process results in very strong fibers (>3 GPa) that are dense, oxygen-free, and nearly stoichiometric. They also display an optimum grain size that is beneficial for high tensile strength, good creep resistance, and good thermal conductivity (ref. 2). The NASA-developed treatment allows the excess boron in the bulk to diffuse to the fiber surface where it reacts with nitrogen to form an in situ boron nitride (BN) coating on the fiber surface (thus the product name of Sylramic-iBN fiber). The removal of boron from the fiber bulk allows the retention of high tensile strength while significantly improving creep resistance and electrical conductivity, and probably thermal conductivity since the grains are slightly larger and the grain boundaries cleaner (ref. 2). Also, as shown in the graph, these improvements allow the fiber to display the best rupture strength at high temperatures in air for any available SiC fiber. In addition, for CMC applications under oxidizing conditions, the formation of an in situ BN surface layer creates a more environmentally durable fiber surface not only because a more oxidation-resistant BN is formed, but also because this layer provides a physical barrier between contacting fibers with oxidation-prone SiC surface layers (refs. 3 and 4). This year, Glenn demonstrated that the in situ BN treatment can be applied simply to Sylramic fibers located within continuous multifiber tows, within woven fabric pieces, or even assembled into complex product shapes (preforms). SiC/SiC ceramic composite panels have been fabricated from Sylramic-iBN fabric and then tested at Glenn within the Ultra-Efficient Engine Technology Program. The test conditions were selected to simulate those experienced by hot-section components in advanced gas turbine engines. The results from testing at Glenn demonstrate all the benefits expected for the Sylramic-iBN fibers. That is, the composites displayed the best thermostructural performance in comparison to composites reinforced by Sylramic fibers and by all other currently available high-performance SiC fiber types (refs. 3 and 5). For these reasons, the Ultra-Efficient Engine Technology Program has selected the Sylramic-iBN fiber for ongoing efforts aimed at SiC/SiC engine component development.

DiCarlo, James A.↗

Interface Consistency: Phase I Results & Phase II Status

Future exploration missions will rely on designing and developing vehicles and complex systems from within NASA and through multiple external commercial partners to meet mission goals. Despite existing consistency-related agency requirements, NASA’s approach to commercial spaceflight development encourages providers’ flexibility and innovation. This strategy is resulting in significant design diversity across Artemis vehicles. Design best practices and guidelines champion interface consistency to promote mental model development and knowledge transfer. However, research investigating the benefits of consistency is mixed, and little is known about its role in complex systems. Determining the level of risk that system diversity presents is difficult, as there is no established method for quantifying the degree of consistency within and across interfaces, nor is there information about the differential impacts of different types of inconsistency. Phase I of this project (Characterization and Measurement) served as a starting point to better understand the construct of consistency, its application, and the range of studies and methods for measuring it. The project team created a taxonomy of consistency to apply to interfaces as a framework to guide the development of tools to assess intersystem consistency. Checklist and cognitive walkthrough methods were developed for use by human factors (HF) and human-computer interaction (HCI) experts. The Intersystem Consistency Scale (ICS) was developed for interface evaluations with crew. A pilot study evaluated the methods’ ability to distinguish differences between Artemis-like prototype pairs exhibiting either high or low design consistency. In addition, click errors and time on task were collected within the ICS (crew-like) group. Results from our exploratory analysis and lessons learned from the pilot study will be discussed. The project team will also present the status of Phase II (Risk Assessment, Standards and Guidelines). This includes incorporating feedback to redesign the assessment tools, and inputs from displays and training Subject Matter Experts to update tasks and prototype designs. The team will present the risk assessment study design to identify the types and levels of inconsistency that pose the greatest risk to performance. Plans to apply these results toward agency standards and guideline recommendations will also be discussed.

Human-Computer Interaction↗

Evaluation of a computer-generated perspective tunnel display for flight path following

The display was evaluated by monitoring pilot performance in a fixed base simulator with the vehicle dynamics of a CH-47 tandem rotor helicopter. Superposition of the predicted future vehicle position on the tunnel image was also investigated to determine whether, and to what extent, it contributes to better system performance (the best predicted future vehicle position was sought). Three types of simulator experiments were conducted: following a desired trajectory in the presence of disturbances; entering the trajectory from a random position, outside the trajectory; detecting and correcting failures in automatic flight. The tunnel display with superimposed predictor/director symbols was shown to be a very successful combination, which outperformed the other two displays in all three experiments. A prediction time of 4 to 7 sec. was found to optimize trajectory tracking for the given vehicle dynamics and flight condition. Pilot acceptance of the tunnel plus predictor/director display was found to be favorable and the time the pilot needed for familiarization with the display was found to be relatively short.

Grunwald, A. J.↗