Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Pulsed Laser Annealed Ga Hyperdoped Poly‐Si / SiO x Passivating Contacts for High‐Efficiency Monocrystalline Si Solar Cells

Polycrystalline Si ( poly ‐Si)‐based passivating contacts are promising candidates for high‐efficiency crystalline Si solar cells. We show that nanosecond‐scale pulsed laser melting (PLM) is an industrially viable technique to fabricate such contacts with precisely controlled dopant concentration profiles that exceed the solid solubility limit. We demonstrate that conventionally doped, hole‐selective poly ‐Si/SiO x contacts that provide poor surface passivation of c ‐Si can be replaced with Ga‐ or B‐doped contacts based on non‐equilibrium doping. We overcome the solid solubility limit for both dopants in poly ‐Si by rapid cooling and recrystallization over a timescale of ∼25 ns. We show an active Ga dopant concentration of ∼3 × 10 20 cm −3 in poly ‐Si which is six times higher than its solubility limit in c ‐Si, and a B dopant concentration as high as ∼10 21 cm −3 . We measure an implied open‐circuit voltage of 735 mV for Ga‐doped poly ‐Si/SiO x contacts on Czochralski Si with a low contact resistivity of 35.5 ± 2.4 mΩ cm 2 . Scanning spreading resistance microscopy and Kelvin probe force microscopy show large diffusion and drift current in the p ‐ n junction that contributes to the low contact resistivity. Our results suggest that PLM can be extended for hyperdoping of other semiconductors with low solubility atoms to enable high‐efficiency devices.

14 SOLAR ENERGY↗

Microturbulence studies of pulsed poloidal current drive discharges in the reversed field pinch

Experimental discharges with pulsed poloidal current drive (PPCD) in the Madison Symmetric Torus reversed field pinch are investigated using a semi-analytic equilibrium model in the gyrokinetic turbulence code GENE. PPCD cases, with plasma currents of 500 kA and 200 kA, exhibit a density-gradient-driven trapped electron mode (TEM) and an ion temperature gradient mode, respectively. Relative to expectations of tokamak core plasmas, the critical gradients for the onset of these instabilities are found to be greater by roughly a factor of the aspect ratio. A significant upshift in the nonlinear TEM transport threshold, previously found for tokamaks, is confirmed in nonlinear reversed field pinch simulations and is roughly three times the threshold for linear instability. The simulated heat fluxes can be brought in agreement with measured diffusivities by introducing a small, resonant magnetic perturbation, thus modeling the residual fluctuations from tearing modes. These fluctuations significantly enhance transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamical chemistry: non-equilibrium effective actions for reactive fluids

Abstract We present two approaches for describing chemical reactions taking place in fluid phase. The first method mirrors the usual derivation of the hydrodynamic equations of motion by relating conserved—or to account for chemical reactions, non-conserved—currents to local-equilibrium parameters. The second method involves a higher-brow approach in which we attack the same problem from the perspective of non-equilibrium effective field theory (EFT). Non-equilibrium effective actions are defined using the in–in formalism on the Schwinger–Keldysh contour and are therefore capable of describing thermal fluctuations and dissipation as well as quantum effects. The non-equilibrium EFT approach is especially powerful as all terms in the action are fully specified by the symmetries of the system; in particular the second law of thermodynamics does not need to be included by hand, but is instead derived from the action itself. We find that the equations of motion generated by both methods agree, but the EFT approach yields certain advantages. To demonstrate some of these advantages we construct a quadratic action that is valid to very small distance scales—much smaller than the scales at which ordinary hydrodynamic theories break down. Such an action captures the full thermodynamic and quantum behavior of reactions and diffusion at quadratic order. Finally, taking the low-frequency and low-wavenumber limit, we reproduce the linearized version of the well-known reaction–diffusion equations as a final coherence check.

Mechanics↗

Ultra-High Vacuum Outgassing Characterization of Thermally Processed Low-Carbon Steel for Advanced Particle Accelerator and Gravitational Wave Detector Applications

This dissertation investigated AISI 1020 low-carbon steel as an alternative vacuum chamber material to conventional stainless steel for ultra-high vacuum (UHV) and extreme-high vacuum (XHV) applications. After a 400 °C/48 h bake, AISI 1020 tube chambers achieved a hydrogen outgassing rate of 2.4 × 10¿¹6 Torr·L·s¿¹·cm¿², approximately 2,300 times lower than the prebaked 316L stainless-steel comparator, among the lowest hydrogen outgassing rates ever reported for an uncoated metallic vacuum chamber. Bare and magnetite-coated AISI 1020 chambers were then compared using throughput and rate-of-rise methods. The magnetite coating yielded 5× lower water outgassing at room temperature, but this advantage disappeared after 80 °C baking. After full thermal conditioning (400 °C/48 h prebake followed by 150 °C/96 h and 200 °C/110 h), bare steel achieved 25× lower hydrogen outgassing than the magnetite-coated chamber (9.6 × 10¿¹6 Torr·L·s¿¹·cm¿²) and >99% H2 purity with carbon species below RGA detection. Monte Carlo molecular flow simulations of a CEBAF photogun beamline (96 scenarios) showed that replacing 304L stainless steel with AISI 1020 reduces equilibrium H2 pressure by a factor of 833; a single 304L electrode contributes 98.8% of the gas load despite occupying only 9.1% of the internal surface area. A 500-m Einstein Telescope beampipe screening showed that corrugated bellows contribute 18% of the gas load from only 0.7% of the surface area. A five-model adsorption isotherm framework applied to 22 pumpdown datasets (164 fits with AR(1)-GLS correction) established that the experimental protocol, not the material, controls isotherm identifiability: Dubinin–Radushkevich wins isothermal pipe pumpdowns; Langmuir wins thermally dominated chamber bakes. Cross-dataset joint fitting of the AISI 1020 pipe pumpdowns yielded an H2 diffusion activation energy Ed = 7.24 ± 1.28 kcal·mol¿¹, consistent with trap dominated diffusion in commercial low-carbon steels. Two companion innovations were developed: a Variable Conductance Device (VCD, patent pending IDF-00723) for XHV outgassing measurement, and VacuumDesignerPro (VDP), a MATLAB-based design tool validated against LIGO benchmarks.

Al-Allaq, Aiman H [Old Dominion University]↗

Dynamic Wettability Alteration of Calcite, Silica and Illite Surfaces in Subsurface Environments: A Case Study of Asphaltene Self-Assembly at Solid Interfaces

A basic understanding of dynamic wettability alteration at complex solid interfaces in varying fluidic environments representative of the subsurface environments is essential for engineering field-scale strategies to enhance energy recovery while reducing environmental impacts. In this study, we characterize dynamic wettability alteration at solid surfaces (e.g., calcite, silica and illite) resulting from the self-assembly and adsorption of polyaromatic macromolecules known as asphaltenes in heptane and toluene solvents at 200 bar and 313 K using classical molecular dynamics simulations. These conditions are chosen to be representative of the subsurface environments. On adding asphaltenes, the equilibrium contact angles on calcite, silica and illite surfaces which are in the range of 25–34° increased to 69–79°. The adsorption and self-assembly of asphaltene molecules on the solid surfaces and the accumulation on water/hydrocarbon interfaces reduces the spreading distances of water molecules and enhances the hydrophobicity of the solid surfaces. Moreover, the accumulation of asphaltene molecules at the water/liquid hydrocarbon interfaces results in a reduction of the interfacial tension of water/heptane and water/toluene, thus stabilizing the water droplet. The enhanced surface hydrophobicity contributes to the formation of layered structures of heptane and toluene close to the solid surfaces and reduces the self-diffusivities of these molecules close to the surface.

42 ENGINEERING↗

Surface coverage dynamics for reversible dissociative adsorption on finite linear lattices

Dissociative adsorption onto a surface introduces dynamic correlations between neighboring sites not found in non-dissociative absorption. We study surface coverage dynamics where reversible dissociative adsorption of dimers occurs on a finite linear lattice. We derive analytic expressions for the equilibrium surface coverage as a function of the number of reactive sites, N, and the ratio of the adsorption and desorption rates. Using these results, we characterize the finite size effect on the equilibrium surface coverage. For comparable N’s, the finite size effect is significantly larger when N is even than when N is odd. Moreover, as N increases, the size effect decays more slowly in the even case than in the odd case. The finite-size effect becomes significant when adsorption and desorption rates are considerably different. These finite-size effects are related to the number of accessible configurations in a finite system where the odd-even dependence arises from the limited number of accessible configurations in the even case. We confirm our analytical results with kinetic Monte Carlo simulations. We also analyze the surface-diffusion case where adsorbed atoms can hop into neighboring sites. As expected, the odd-even dependence disappears because more configurations are accessible in the even case due to surface diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An accurate symplectic calculation of the inboard magnetic footprint from statistical topological noise and field errors in the DIII-D

Any canonical transformation of Hamiltonian equations is symplectic, and any area-preserving transformation in 2D is a symplectomorphism. Based on these, a discrete symplectic map and its continuous symplectic analog are derived for forward magnetic field line trajectories in natural canonical coordinates. The unperturbed axisymmetric Hamiltonian for magnetic field lines is constructed from the experimental data in the DIII-D [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)]. The equilibrium Hamiltonian is a highly accurate, analytic, and realistic representation of the magnetic geometry of the DIII-D. These symplectic mathematical maps are used to calculate the magnetic footprint on the inboard collector plate in the DIII-D. Internal statistical topological noise and field errors are irreducible and ubiquitous in magnetic confinement schemes for fusion. It is important to know the stochasticity and magnetic footprint from noise and error fields. The estimates of the spectrum and mode amplitudes of the spatial topological noise and magnetic errors in the DIII-D are used as magnetic perturbation. The discrete and continuous symplectic maps are used to calculate the magnetic footprint on the inboard collector plate of the DIII-D by inverting the natural coordinates to physical coordinates. The combination of highly accurate equilibrium generating function, natural canonical coordinates, symplecticity, and small step-size together gives a very accurate calculation of magnetic footprint. Radial variation of magnetic perturbation and the response of plasma to perturbation are not included. The inboard footprint from noise and errors are dominated by m=3, n=1 mode. The footprint is in the form of a toroidally winding helical strip. The width of stochastic layer scales as (1/2) power of amplitude. The area of footprint scales as first power of amplitude. The physical parameters such as toroidal angle, length, and poloidal angle covered before striking, and the safety factor all have fractal structure. The average field diffusion near the X-point for lines that strike and that do not strike differs by about three to four orders of magnitude. The magnetic footprint gives the maximal bounds on size and heat flux density on collector plate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum graph models for transport in filamentary switching

The formation of metallic nanofilaments bridging two electrodes across an insulator is a mechanism for resistive switching. Examples of such phenomena include atomic synapses, which constitute a distinct class of memristive devices the behavior of which is closely tied to the properties of the filament. Until recently, experimental investigation of the low-temperature regime and quantum transport effects has been limited. However, with growing interest in understanding the true impacts of the filament on device conductance, comprehending quantum effects has become crucial for quantum neuromorphic hardware. Here, we discuss quantum transport resulting from filamentary switching in a narrow region where the continuous approximation of the contact is not valid, and only a few atoms are involved. In this scenario, the filament can be represented by a graph depicting the adjacency of atoms and the overlap between atomic orbitals. Using the theory of quantum graphs with locally diffusive node scattering, we calculate the scattering amplitude of charge carriers on this graph and explore the interplay between filamentary formation and quantum transport effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predictive modeling of CO2 sequestration in deep saline sandstone reservoirs: Impacts of geochemical kinetics

One idea for mitigating the increase in fossil-fuel generated CO{sub 2} in the atmosphere is to inject CO{sub 2} into subsurface saline sandstone reservoirs. To decide whether to try such sequestration at a globally significant scale will require the ability to predict the fate of injected CO{sub 2}. Thus, models are needed to predict the rates and extents of subsurface rock-water-gas interactions. Several reactive transport models for CO{sub 2} sequestration created in the last decade predicted sequestration in sandstone reservoirs of ~17 to ~90 kg CO{sub 2} m{sup -3|. To build confidence in such models, a baseline problem including rock + water chemistry is proposed as the basis for future modeling so that both the models and the parameterizations can be compared systematically. In addition, a reactive diffusion model is used to investigate the fate of injected supercritical CO{sub 2} fluid in the proposed baseline reservoir + brine system. In the baseline problem, injected CO{sub 2} is redistributed from the supercritical (SC) free phase by dissolution into pore brine and by formation of carbonates in the sandstone. The numerical transport model incorporates a full kinetic description of mineral-water reactions under the assumption that transport is by diffusion only. Sensitivity tests were also run to understand which mineral kinetics reactions are important for CO{sub 2} trapping. The diffusion transport model shows that for the first ~20 years after CO{sub 2} diffusion initiates, CO{sub 2} is mostly consumed by dissolution into the brine to form CO{sub 2,aq} (solubility trapping). From 20-200 years, both solubility and mineral trapping are important as calcite precipitation is driven by dissolution of oligoclase. From 200 to 1000 years, mineral trapping is the most important sequestration mechanism, as smectite dissolves and calcite precipitates. Beyond 2000 years, most trapping is due to formation of aqueous HCO{sub 3}{sup -}. Ninety-seven percent of the maximum CO{sub 2} sequestration, 34.5 kg CO{sub 2} per m{sup 3} of sandstone, is attained by 4000 years even though the system does not achieve chemical equilibrium until ~25,000 years. This maximum represents about 20% CO{sub 2} dissolved as CO{sub 2},aq, 50% dissolved as HCO{sub 3}{sup -}{sub ,aq}, and 30% precipitated as calcite. The extent of sequestration as HCO{sub 3}{sup -} at equilibrium can be calculated from equilibrium thermodynamics and is roughly equivalent to the amount of Na+ in the initial sandstone in a soluble mineral (here, oligoclase). Similarly, the extent of trapping in calcite is determined by the amount of Ca2+ in the initial oligoclase and smectite. Sensitivity analyses show that the rate of CO{sub 2} sequestration is sensitive to the mineral-water reaction kinetic constants between approximately 10 and 4000 years. The sensitivity of CO{sub 2} sequestration to the rate constants decreases in magnitude respectively from oligoclase to albite to smectite.

54 ENVIRONMENTAL SCIENCES↗

High-resolution images of diffuse neutral clouds in the milky way. I. Observations, imaging, and basic cloud properties

A set of diffuse interstellar clouds in the inner Galaxy within a few hundred parsecs of the Galactic plane has been observed at an angular resolution of ≈1 and farcm;0 combining data from the NRAO Green Bank Telescope and the Very Large Array. At the distance of the clouds, the linear resolution ranges from ∼1.9 to ∼2.8 pc. These clouds have been selected to be somewhat outside of the Galactic plane, and thus are not confused with unrelated emission, but in other respects they are a Galactic population. They are located near the tangent points in the inner Galaxy, and thus at a quantifiable distance: 2.3⩽R⩽6.0 kpc from the Galactic Center and −1000⩽z⩽+610 pc from the Galactic plane. These are the first images of the diffuse neutral H i clouds that may constitute a considerable fraction of the interstellar medium (ISM). Peak H i column densities lie in the range N{sub H i} = 0.8–2.9 × 10{sup 20} cm{sup −2}. Cloud diameters vary between about 10 and 100 pc, and their H i mass spans the range from less than a hundred to a few thousands M{sub ⊙}. The clouds show no morphological consistency of any kind, except that their shapes are highly irregular. One cloud may lie within the hot wind from the nucleus of the Galaxy, and some clouds show evidence of two distinct thermal phases as would be expected from equilibrium models of the ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ synchrotron diffraction and modeling of non-equilibrium solidification of a MnFeCoNiCu alloy

The solidification mechanism and segregation behavior of laser-melted Mn 35 Fe 5 Co 20 Ni 20 Cu 20 was firstly investigated via in situ synchrotron x-ray diffraction at millisecond temporal resolution. The transient composition evolution of the random solid solution during sequential solidification of dendritic and interdendritic regions complicates the analysis of synchrotron diffraction data via any single conventional tool, such as Rietveld refinement. Therefore, a novel approach combining a hard-sphere approximation model, thermodynamic simulation, thermal expansion measurement and microstructural characterization was developed to assist in a fundamental understanding of the evolution of local composition, lattice parameter, and dendrite volume fraction corresponding to the diffraction data. This methodology yields self-consistent results across different methods. Via this approach, four distinct stages were identified, including: (I) FCC dendrite solidification, (II) solidification of FCC interdendritic region, (III) solid-state interdiffusion and (IV) final cooling with marginal diffusion. It was found out that in Stage I, Cu and Mn were rejected into liquid as Mn 35 Fe 5 Co 20 Ni 20 Cu 20 solidified dendritically. During Stage II, the lattice parameter disparity between dendrite and interdendritic region escalated as Cu and Mn continued segregating into the interdendritic region. After complete solidification, during Stage III, the lattice parameter disparity gradually decreases, demonstrating a degree of composition homogenization. The volume fraction of dendrites slightly grew from 58.3 to 65.5%, based on the evolving composition profile across a dendrite/interdendritic interface in diffusion calculations. Postmortem metallography further confirmed that dendrites have a volume fraction of 64.7 ± 5.3% in the final microstructure.

36 MATERIALS SCIENCE↗

Uncovering grain and subgrain microstructure at the scale of additive manufacturing melt tracks with a scalable cellular automaton solidification model

Metal additive manufacturing, characterized by rapid solidification, yields refined grains with a distinctive cellular subgrain microstructure that plays a pivotal role in determining material properties. Due to the significant computational expense demanded to simulate the required physics with submicron spatial resolution, their numerical simulations have been limited to proof-of-concept studies to either 2D or small subregions of a melt pool. In this study, an open-source, scalable, solidification code, muMatScale, based on the cellular automaton method, has been developed to predict the grain and the underlying subgrain microstructure over an entire melt pool. The model incorporates flexible parallelization schemes, utilizing MPI and OpenMP GPU Offloading, in addition to appropriate multi-physics specific to non-equilibrium rapid solidification in AM. The impact of nucleation parameters on grain microstructures was investigated with a focus on grain size variations and morphology transitions. With selected nucleation parameters, the simulation predicted the grain size, subgrain morphology, crystallographic orientation, and microsegregation aligned with experimental measurements. The model demonstrates that epitaxial grain growth is a dominant factor at the melt pool boundary, influencing grain size variation under different grain sizes in the build plate while maintaining consistent primary dendrite arm spacing under identical thermal conditions. Here, the highly efficient numerical model enables large-scale simulations with a spatial resolution of 100 nm or less, unveiling unprecedented insights into thermal and solutal diffusion driven grain growth, and the subgrains with microsegregation within grains in 3D across scales. muMatScale will enable the linking of submicron length-scale microstructure to part-level material behavior by investigating fundamental solidification problems at the intercellular scale in many-track and many-layer builds.

36 MATERIALS SCIENCE↗

A comparative study of solute trapping in Fe-(33–45 at%) Cu alloys manufactured by laser directed energy deposition

The high cooling rates in laser directed energy deposition (DED-LB) of alloys lead to substantial amounts of solute trapping as solute atoms cannot diffuse away from the solid/liquid interface before it advances. In some concentrated alloys, this results in supersaturated solid phases that form nanoscale hierarchical microstructures when the solute atoms precipitate out during reheating from subsequent laser passes. We choose the Iron-Copper (Fe-Cu) binary alloy as model system as it is chemically homogeneous in the liquid phase and has negligible solid solubility at room temperature. Two alloys with nominal compositions in atomic (at.) %, Fe67Cu33 and Fe55Cu45, were manufactured using DED-LB. Scanning transmission electron microscopy (STEM), energy dispersive spectroscopy (EDS) and wavelength dispersive spectroscopy (WDS) were used to characterize the nanostructures and heterogeneous chemical compositions. A non-equilibrium solute partitioning model was used to compute the supersaturated chemistries of the constituent phases and validated with experimentally measured compositions. The measured phase compositions of the two alloys were very similar, at roughly 12 at.% Cu and 4 at.% Fe in the α(bcc)-Fe and ε(fcc)-Cu phases respectively, despite having different processing parameters and mechanical behavior. This indicates that the total thermal history, that depends on both the processing parameters and laser scan pattern, plays a stronger role on the final microstructure evolution than just the initial quantity of trapped solute. In addition, we find that current non-equilibrium solute partitioning models applied on the continuum scale fall short of predicting accurate quantitative phase compositions in concentrated alloys, although the qualitative trends are captured correctly.

36 MATERIALS SCIENCE↗

Initial Demonstration of New Griffin Technologies for Simulating the Running-In Phase of Pebble Bed Reactors

Griffin is a reactor multiphysics modeling application based on MOOSE (Multiphysics Object-Oriented Simulation Environment) and specifically targeting transient modeling of advanced reactors. Griffin has been used recently to model pebble-bed reactors for the Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research and the Advanced Reactor Technology program. This modeling work has focused thus far on the direct calculation of equilibrium cores. This report documents an initial demonstration of a new running-in simulation capability. The new running-in capability is verified using the existing direct equilibrium core calculation capability. A simplified pebble-bed reactor model is then used to demonstrate the running-in simulation capability. This demonstration shows that Griffin is able to simulate years of operation during the running-in phase efficiently with each depletion step taking only several seconds. Two new technologies are also presented in this report which have been developed in Griffin that will be essential for improved accuracy both of the direct equilibrium core computation and the new running-in simulation capability. The first technology is an online cross section generation capability specifically targeted for pebble-bed reactors. This will improve the accuracy of the depletion calculation as the cross sections are generated at the exact core status. This also avoids the difficult step of pre-generating a separate standalone multigroup cross section set. Secondly, a newly implemented discretization for discontinuous finite element method (DFEM) SN transport in cylindrical (RZ) coordinates, which can be solved efficiently using the existing SN sweep solver, is discussed and some results are shown demonstrating the usefulness of the additional accuracy transport provides over a diffusion approximation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Study of Turbulence-Driven Inward Momentum Flux & Construction of a Difference Scheme for Fokker-Planck-Landau Operator

Momentum transport driven by microinstability is studied via analytic theories, gyrokinetic simulations, and experimental data analysis. A scenario for rotation profile evolution is constructed based on experimental observation that parallel flow initiates at edge region and penetrates into core region of tokamak [1]. In particular, turbulent diffusion and inward convective pinch are studied according to this scenario. For study of convective momentum pinch, toroidal ion temperature gradient mode near marginal stability is examined in kinetic limit. It is found from quasilinear estimation that the inward turbulent equipartition momentum pinch remains as the most robust part of pinch. In addition, it is found that ion temperature gradient driven momentum pinch is inward for typical parameters, while ion density gradient driven momentum pinch is outward. It is shown by theoretical formulas and experimental data analysis that momentum pinch velocity is sensitive to the electron to ion temperature ratio. For study of diffusive momentum transport, parallel shear flow instability is studied in fluid limit. Diffusion coefficient using mixing length estimate from nonlocal theory reveals that it has a strong dependence on the parallel flow shear and is mainly carried by fluctuations in short wavelength regime. Gyrokinetic simulation of collisionless parallel shear flow instability shows that the analytic prediction of diffusion coefficient is comparable to numerical values in the linear phase of the simulations. In the nonlinear phase, fluctuation energy gets transferred to the long wavelength regime. A two-dimensional, uniform velocity-grid based solver for the nonlinear Fokker-Planck-Landau (FPL) collision operator has been developed in the limit of strong magnetic field. The conservative and entropy increasing semidiscretized numerical scheme for the isotropic FPL equation by C. Buet et al. (2002) has been extended to 2D velocity space. A Picard fixed point method is used for semi-implicit time advance. One time evaluation of interpolation coefficients for probability distribution function is introduced so that numerical equilibrium is achieved with Maxwellian. However, positivity property is sacrificed at the saving of computational costs. In addition, a highly practical method is suggested to apply the velocity-grid based collision solver to particle-in-cell code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen trapping energetics at BCC iron-helium interfaces

Density functional theory (DFT) calculations have been performed to assess the trapping and segregation strength of hydrogen (H) to helium (He) interfaces in BCC (Fe) as a function of He density and surface orientation. The He density ranges from 0 to 2 He/V which corresponds to equilibrium bubbles that are expected to form in the structural components in a fusion reactor environment. The DFT calculations consist of a slab of BCC metal and an initial lattice of FCC He. Here, the report on the binding energy of H to these interfaces as well as the migration barriers into and away from the surface, which together provide information on the de-trapping energy for H at He bubbles. It was found that the binding energy of H to He-Fe interfaces decreases with increasing He density. Migration barriers are also modified due to the He density, which are sensitive to the surface orientation as well as the diffusion pathway. These results provide valuable first-principles energetics that are necessary for higher-order, mesoscale models, and provide insight into the extent to which He bubbles may trap tritium in fusion structural materials.

42 ENGINEERING↗

Atomic Mixing of Initially Separated Mixtures

We consider the atomic mixing of two materials, initially separated in space, at fixed temperature– pressure conditions [T, p], and zero mass-mean velocity. Each material is composed of a specified set of atomic species whose density corresponds to the specieswise real Equation of State (EOS) $\tilde{&#961}$ i [T, p]. Because there are no spatial gradients in the mean [T, p] state, the only mechanism for mixing is a specieswise nonequilibrium thermal velocity distribution. The recipe for nonequilibrium species mass fluxes is taken directly from Hirschfelder, Curtiss, and Bird, who express the diffusion velocities in terms of gradients in the molar concentrations and pairwise coefficients of diffusion. EOS data from the SESAME library is used for all species. Data for the specieswise self diffusion coefficients is adopted from the Orbital Free Molecular Dynamics (OFMD) simulations of Ticknor et al.; the so-called Darken approximation is used to express the mutual diffusion coefficients of a mixture in the manner used by White et al. A one-dimensional spatial domain is used; with the left half occupied by one multispecies material and the right half occupied by the other, and with zero–gradient boundary conditions at the ends of the domain. Hence the total mass in the domain is a constant. At time t = 0 the materials are separated. Accordingly, spatial gradients at the separation point are infinite and the species fluxes are also infinite. As t → $\textbf{∞}$ the spatial gradients approach zero and a uniform set of species concentrations is obtained; at this point the system is said to be at “thermodynamic equilibrium.” Analytic solution of the problem is not possible in general due to the nonlinear concentration dependence of the species fluxes. Hence we utilize the numerical solution apparatus in Mathematica for obtaining accurate time-dependent solutions for the mixing of various initial species masses for conditions of interest in laser-driven Inertial Confinement Fusion. Concentration profiles and the speed of propagation of the mixing fronts are discussed in light of the nonlinearity of the problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimized utilization of COMB3 reactive potentials in LAMMPS

An investigation to optimize the application of the third-generation charge optimized many-body (COMB3) interatomic potential and associated input parameters was carried out through the study of solid–liquid interactions in classical molecular dynamics simulations. The rates of these molecular interactions are understood through the wetting rates of water nano-droplets on a bare copper (111) surface. Implementing the Langevin thermostat, the influence of simulation time step, the number of atoms in the system, the frequency at which charge equilibration is performed, and the temperature relaxation rate are all examined. The results indicate that time steps of 0.4 fs are possible when using longer relaxation times for the system temperature, which is almost double the typical time step used for reactive potentials. Additionally, the use of the charge equilibration allows for a fewer atomic layers to be used in the Cu slab. In addition, charge equilibrium schemes do not need to be performed every time step to ensure accurate charge transfer. Interestingly, the rate of wetting for the nanodroplets is dominantly dependent on the temperature relaxation time, which is predicted to significantly change the viscosity of the water droplets. This work provides a pathway for optimizing simulations using the COMB3 reactive interatomic potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗