Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explosive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Studies on the fracture of HR-2 steel and LY12 aluminum cylinders under explosive imploding

Experimental studies were conducted on the fracture phenomena of HR-2 steel and LY12 aluminum alloy cylinder under explosive imploding. Optical and flash X-ray photography showed that thermo-plastic instability in the form of shear fracture occurs during the imploding process. Shear initiation and propagation processes on the inner wall was directly observed by high-speed photography. The two kinds of experimental records and examination of recovered fragments showed that shear cracks initiate from the inner surface of the cylinder at a very early stage and propagate along the maximum shear stress paths radically outward and longitudinal along the detonation direction to form shear fracture surfaces. Under imploding conditions there is a strong tendency to form self-organized shear fractures in comparison to exploding fracture of identical cylinder material and loading intensity.

36 MATERIALS SCIENCE↗

CHARGED PARTICLE MOTION IN AN EXPLOSIVELY GENERATED IONIZING SHOCK

Different aspects of the plasma generated in a gas contained in a tube due to detonation of a small explosive charge located at one end of the tube are presented. The motion of the charged particles within the plasma is monitored using Rogowski coils. Using time-resolved emission spectroscopy the temperature and species in the detonation products and compressed gas behind the shock wave are recorded. From the spectral lines of the emission profiles the temperatures and electron density were evaluated to be in the vicinity of 7,000 K and 5x10{sup 22} m{sup -3}. An ultra fast wave traveling down the guide tube ahead of the hydrodynamic shock and causing any charged particles there to move fast enough to be detected by the Rogowski coils was recorded. From the measurements the phase velocity of the wave was calculated at 525 km/s when krypton filled the tube, and 1300 km/s in the case of argon. The temperature and density measurements are consistent with the data reported in the literature for similar tests. The electrostatic pulse measurements are a new phenomena not previously observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PROGRESS TOWARDS MICROWAVE IGNITION OF EXPLOSIVES

It is known that various materials are caused to spark when subjected to microwave radiation, and others can be heated to extremely high temperatures. This paper studies the behaviour of graphite under microwave radiation using a multi-mode 2.45 GHz+-50 Hz microwave cavity, and its potential applications in propellant ignition systems. Evidence for a correlation between sample mass and arcing intensity is presented, and a linear relationship between sample mass and temperature is found. Both graphite powder and flakes show increasing arcing intensity with increasing mass up to approx150 mg, after which the behaviour is more dispersed. The temperature achieved increases linearly with increasing mass, with maximum temperatures of 1,011 deg. C and 657 deg. C achieved for powder (<0.1 mm) and flakes respectively--well above thermal ignition temperatures for most common explosives.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

IMAGING HIGH SPEED PARTICLES IN EXPLOSIVE DRIVEN BLAST WAVES

This research describes a new application of a commercially available particle image velocimetry (PIV) instrument adapted for imaging particles in a blast wave. Powder was dispersed through the PIV light sheet using a right circular cylindrical charge containing aluminum powder filled in the annular space between the explosive core and exterior paper tube wall of the charge. Images acquired from each shot showed particle agglomeration and unique structures with the smaller particle diameters having developed structured appearances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multistage reaction pathways in detonating high explosives

Atomistic mechanisms underlying the reaction time and intermediate reaction products of detonating high explosives far from equilibrium have been elusive. This is because detonation is one of the hardest multiscale physics problems, in which diverse length and time scales play important roles. Here, large spatiotemporal-scale reactive molecular dynamics simulations validated by quantum molecular dynamics simulations reveal a two-stage reaction mechanism during the detonation of cyclotrimethylenetrinitramine crystal. Rapid production of N{sub 2} and H{sub 2}O within ∼10 ps is followed by delayed production of CO molecules beyond ns. We found that further decomposition towards the final products is inhibited by the formation of large metastable carbon- and oxygen-rich clusters with fractal geometry. In addition, we found distinct unimolecular and intermolecular reaction pathways, respectively, for the rapid N{sub 2} and H{sub 2}O productions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ Raman spectroscopy and high-speed photography of a shocked triaminotrinitrobenzene based explosive

We have developed a single-shot Raman spectroscopy experiment to study at the molecular level the initiation mechanisms that can lead to sustained detonation of a triaminotrinitrobenzene-based explosive. Shocks up to 30 GPa were generated using a two-stage laser-driven flyer plate generator. The samples were confined by an optical window and shock pressure was maintained for at least 30 ns. Photon Doppler Velocimetry measurements were performed at the explosive/window interface to determine the shock pressure profile. Raman spectra were recorded as a function of shock pressure and the shifts of the principal modes were compared to static high-pressure measurements performed in a diamond anvil cell. Our shock data indicate the role of temperature effects. Our Raman spectra also show a progressive extinction of the signal which disappears around 9 GPa. High-speed photography images reveal a simultaneous progressive darkening of the sample surface up to total opacity at 9 GPa. Reflectivity measurements under shock compression show that this opacity is due to a broadening of the absorption spectrum over the entire visible region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compaction shock dissipation in low density granular explosive

The microstructure of granular explosives can affect dissipative heating within compaction shocks that can trigger combustion and initiate detonation. Because initiation occurs over distances that are much larger than the mean particle size, homogenized (macroscale) theories are often used to describe local thermodynamic states within and behind shocks that are regarded as the average manifestation of thermodynamic fields at the particle scale. In this paper, mesoscale modeling and simulation are used to examine how the initial packing density of granular HMX (C{sub 4}H{sub 8}N{sub 8}O{sub 8}) C{sub 4}H{sub 8}N{sub 8}O{sub 8} having a narrow particle size distribution influences dissipation within resolved, planar compaction shocks. The model tracks the evolution of thermomechanical fields within large ensembles of particles due to pore collapse. Effective shock profiles, obtained by averaging mesoscale fields over space and time, are compared with those given by an independent macroscale compaction theory that predicts the variation in effective thermomechanical fields within shocks due to an imbalance between the solid pressure and a configurational stress. Reducing packing density is shown to reduce the dissipation rate within shocks but increase the integrated dissipated work over shock rise times, which is indicative of enhanced sensitivity. In all cases, dissipated work is related to shock pressure by a density-dependent power law, and shock rise time is related to pressure by a power law having an exponent of negative one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of dogbone sample size in the tensile testing of TATB-based plastic‑bonded explosive materials

Mechanical properties are of interest for many plastic‑bonded explosive (PBX) materials with tensile properties being of particular interest. Direct tensile measurements using dogbone-shaped samples are considered the gold standard, but they are fairly large, making testing more costly and less desirable from a safety perspective. We investigated whether the measured tensile strength depends on the dogbone specimen size, which to our knowledge, has not been reported in the literature for PBX materials. Understanding this should inform the feasibility of employing smaller samples and how sample size should be considered when comparing PBX dogbone values in the literature. The TATB-based PBX dogbone sample size was varied by (a) scaling all dimensions proportionally and (b) varying only the length of the samples. It was observed that the measured tensile peak stress (strength) was a function of the sample size, and was more dependent on the diameter (cross-sectional area) than the length of the samples. Since peak stress is calculated as peak force normalized to the diameter of the sample, one might not expect an explicit diameter dependence for the peak stress. Therefore, these results suggest there may be an additional strengthening effect as the sample diameter is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimensionality effects in void-induced explosive sensitivity

Here, the dimensionality of defects in high explosives controls their heat generation and the expansion of deflagrations from them. We compare the behaviour of spherical voids in three dimensions to that of circular voids in two dimensions. The behaviour is qualitatively similar, but the additional focusing along the extra transverse dimension significantly reduces the piston velocity needed to initiate reactions. However, the reactions do not grow as well in three dimensions, so detonations require larger piston velocities. Pressure exponents are seen to be similar to those for the two-dimensional system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE GALACTIC SUPERNOVA REMNANT W49B LIKELY ORIGINATES FROM A JET-DRIVEN, CORE-COLLAPSE EXPLOSION

We present results from a 220 ks observation of the Galactic supernova remnant (SNR) W49B using the Advanced CCD Imaging Spectrometer on board the Chanrda X-ray Observatory. We exploit these data to perform detailed spatially resolved spectroscopic analyses across the SNR with the aim to investigate the thermodynamic properties and explosive origin of W49B. We find substantial variation in the electron temperature and absorbing column toward W49B, and we show that the mean metal abundances are consistent with the predicted yields in models of bipolar/jet-driven core-collapse SNe. Furthermore, we set strict upper limits on the X-ray luminosity of any undetected point sources, and we exclude the presence of a neutron star associated with W49B. We conclude that the morphological, spectral, and environmental characteristics of W49B are indicative of a bipolar Type Ib/Ic SN origin, making it the first of its kind to be discovered in the Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗

A 10,000 YEAR OLD EXPLOSION IN DR21

Sensitive high angular resolution ({approx}2'') CO(2-1) line observations made with the Submillimeter Array of the flow emanating from the high-mass star-forming region DR21 located in the Cygnus X molecular cloud are presented. These new interferometric observations indicate that this well known enigmatic outflow appears to have been produced by an explosive event that took place about 10,000 years ago, and that might be related to the disintegration of a massive stellar system such as the one that occurred in Orion Becklin-Neugebauer/Kleinman-Low 500 years ago, but about 20 times more energetic. This result therefore argues in favor of the idea that the disintegration of young stellar systems perhaps is a frequent phenomenon present during the formation of massive stars. However, many more theoretical and observational studies are still needed to confirm our hypothesis.

79 ASTRONOMY AND ASTROPHYSICS↗

Passive Infrared Hyperspectral Imaging for Standoff Detection of Tetryl Explosive Residue on a Steel Surface

A commercial imaging FTIR spectrometer that operates between 850 and 1300 cm{sup -1} was used to passively image a galvanized steel plate stained with a residue of the explosive tetryl (2,4,6,N-tetranitro-N-methylaniline). The tetryl was coated onto the plate in a 30 cm diameter spot with an areal dosage of 90 {mu}g tetryl/cm{sup 2}. The stain on the plate was easily detected at standoff distances of 14 and 31 m by examining the hyperspectral data cubes using maximum autocorrelation factors and a slight modification to a generalized least squares target detection algorithm. End-member extraction showed good comparison in a few key bands between the target end-member and laboratory reflectance spectra; however, significant differences were also observed

36 MATERIALS SCIENCE↗

Differential Spectroscopic Imaging of Particulate Explosives Residue

We present experimental results showing transmission and reflection imaging of approximately 100 microgram quantities of particulate explosives residue using a commercial uncooled microbolometer infrared camera and CO2 laser differential wavelength illumination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the Structural Response from a Propagating High Explosive Using Smooth Particle Hydrodynamics

This report primarily concerns the use of two massively parallel finite element codes originally written and maintained at Lawrence Livermore National Laboratory. ALE3D is an explicit hydrodynamics code commonly employed to simulate wave propagation from high energy scenarios and the resulting interaction with nearby structures. This coupled response ensures that a structure is accurately applied with a blast loading varying both in space and time. Figure 1 illustrates the radial outward propagation of a pressure wave due to a center detonated spherical explosive originating from the lower left. The radial symmetry seen in this scenario is lost when instead a cylindrocal charge is detonated. Figure 2 indicates that a stronger, faster traveling pressure wave occurs in the direction of the normal axis to the cylinder. The ALE3D name is derived because of the use of arbitrary-Lagrange-Eulerian elements in which the mesh is allowed to advect; a process through which the mesh is modified to alleviate tanlging and general mesh distortion often cuased by high energy scenarios. The counterpart to an advecting element is a Lagrange element, whose mesh moves with the material. Ideally all structural components are kept Lagrange as long as possible to preserve accuracy of material variables and minimize advection related errors. Advection leads to mixed zoning, so using structural Lagrange elements also improves the visualization when post processing the results. A simplified representation of the advection process is shown in Figure 3. First the mesh is distorted due to material motion during the Lagrange step. The mesh is then shifted to an idealized and less distorted state to prevent irregular zones caused by the Lagrange motion. Lastly, the state variables are remapped to the elements of the newly constructed mesh. Note that Figure 3 represents a purely Eulerian mesh relaxation because the mesh is relocated back to the pre-Lagrange position. This is the case when the material flows through a still mesh. This is not typically done in an ALE3D analysis, especially if Lagrange elements exist. Deforming Lagrange elements would certainly tangle with a Eulerian mesh eventually. The best method in this case is to have an advecting mesh positioned as some relaxed version of the pre and post Lagrange step; this gives the best opportunity of modeling a high energy event with a combination of Lagrange and ALE elements. Dyne3D is another explicit dynamic analysis code, ParaDyn being the parallel version. ParaDyn is used for predicting the transient response of three dimensional structures using Lagrangian solid mechanics. Large deformation and mesh tangling is often resolved through the use of an element deletion scheme. This is useful to accommodate component failure, but if it is done purely as a means to preserve a useful mesh it can lead to problems because it does not maintain continuity of the material bulk response. Whatever medium exists between structural components is typically not modeled in ParaDyn. Instead, a structure either has a known loading profile applied or given initial conditions. The many included contact algorithms can calculate the loading response of materials if and when they collide. A recent implementation of an SPH module in which failed or deleted material nodes are converted to independent particles is currently being utilized for a variety of spall related problems and high velocity impact scenarios. Figure 4 shows an example of a projectile, given an initial velocity, and how it fails the first plate which generates SPH particles which then interact with and damage the second plate.

36 MATERIALS SCIENCE↗

Soil Sampling Plan in Support of the Human Health and Ecological Risk Assessment for the Operation of the Explosives Waste Treatment Facilitiy at Site 300 of the Lawrence Livermore National Laboratory

LLNL proposes to obtain soil samples from the following areas: (1) Four areas downwind of the Explosives Waste Treatment Facility (EWTF) Burn Units (i.e., Thermal Treatment Unit and Burn Pan); (2) One area upwind of the Burn Units and Detonation Pad; (3) Two areas downwind of the EWTF Detonation Pad; and (4) Three areas unaffected (representing ambient conditions) by EWTF operations approximately 7000-8000 feet upwind of the facility. The purpose of the sampling in areas 1, 2, and 3 is to detect if operations cause increases in concentrations of materials downwind of the Burn Units or downwind of the Detonation Pad. The purpose of the sampling in area 4 is to determine if previously developed background screening levels can be applied to EWTF operations. A 20 foot diameter circle will define each sample area. Soil samples will be obtained from four random locations inside each 20 foot circle. The samples will be obtained immediately below the surface, free of any organic matter (e.g., roots) and other surface and subsurface material (e.g., rocks) that is not conducive to analysis. The random identification of four discrete sample locations in each circle will allow the variability between sample locations and areas, if present, to be evaluated statistically. At a minimum, data will be evaluated by the Wilcoxon Rank Sum test. All future sampling will occur in the same 20 foot diameter circle; however, only one randomly located sample (instead of four) will be obtained. Future samples will be analyzed for the same chemicals of potential ecological concern (CPECs) as the initial sample. Sample areas and locations will be recorded by Global Positioning System coordinates.

54 ENVIRONMENTAL SCIENCES↗

Explosive Model Tarantula 4d/JWL++ Calibration of LX-17

Tarantula is an explosive kinetic package intended to do detonation, shock initiation, failure, corner-turning with dead zones, gap tests and air gaps in reactive flow hydrocode models. The first, 2007-2008 version with monotonic Q is here run inside JWL++ with square zoning from 40 to 200 zones/cm on ambient LX-17. The model splits the rate behavior in every zone into sections set by the hydrocode pressure, P + Q. As the pressure rises, we pass through the no-reaction, initiation, ramp-up/failure and detonation sections sequentially. We find that the initiation and pure detonation rate constants are largely insensitive to zoning but that the ramp-up/failure rate constant is extremely sensitive. At no time does the model pass every test, but the pressure-based approach generally works. The best values for the ramp/failure region are listed here in Mb units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electromagnetic Effects in SDF Explosions

The notion of high ion and electron concentrations in the detonation of aluminized explosive mixtures has aroused some interest in electro-magnetic effects that the SDF charges might generate when detonated. Motivated by this interest we have started to investigate whether significant electro-magnetic effects show up in our small-scale experiments. However, the design of instrumentation for this purpose is far from straightforward, since there are a number of open questions. Thus the main aim of the feasibility tests is to find - if possible - a simple and reliable method that can be used as a diagnostic tool for electro-magnetic effects. SDF charges with a 0.5-g PETN booster and a filling of 1 g aluminum flakes have been investigated in three barometric bomb calorimeters with volumes ranging from 6.3 l to of 6.6 l. Though similar in volume, the barometric bombs differed in the length-to-diameter ratio. The tests were carried out with the bombs filled with either air or nitrogen at ambient pressure. The comparison of the test in air to those in nitrogen shows that the combustion of TNT detonation products or aluminum generates a substantial increase of the quasi-steady overpressure in the bombs. Repeated tests in the same configuration resulted in some scatter of the experimental results. The most likely reason is that the aluminum combustion in most or all cases is incomplete and that the amount of aluminum actually burned varies from test to test. The mass fraction burned apparently decreases with increasing aspect ratio L/D. Thus an L/D-ratio of about 1 is optimal for the performance of shock-dispersed-fuel combustion. However, at an L/D-ratio of about 5 the combustion still yields appreciable overpressure in excess of the detonation. For a multi-burst scenario in a tunnel environment with a number of SDF charges distributed along a tunnel section a spacing of 5 tunnel diameter and a fuel-specific volume of around 7 l/g might provide an acceptable compromise between optimizing the combustion performance and keeping the number of elementary charges low. Further tests in a barometric bomb calorimeter of 21.2 l volume were performed with four types of aluminum. The mass fraction burned in this case appeared to depend on the morphology of the aluminum particles. Flake aluminum exhibited a better performance than granulated aluminum with particle sizes ranging from below 25 {micro}m to 125 {micro}m for the coarsest material. In addition, a feasibility study on electro-magnetic effects from SDF charges detonated in a tunnel has been performed. A method was developed to measure the local, unsteady electro-conductivity in the detonation/combustion products cloud. This method proved to yield reproducible results. A variety of methods were tested with regard to probing electro-magnetic pulses from the detonation of SDF charges. The results showed little reproducibility and were small compared to the effect from pulsed high voltage discharges of comparatively small energy (around 32 J). Thus either no significant electromagnetic pulse is generated in our small-scale tests or the tested techniques have to be discarded as too insensitive or too limited in bandwidth to detect possibly very high frequency electro-magnetic disturbances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conductivity Histories Measured in Shock-Dispersed-Fuel Explosion Clouds

The notion of high ion and electron concentrations in the detonation of aluminized explosive mixtures has aroused some interest in electro-magnetic effects that the SDF charges might generate when detonated. Beside the scientific aspects at least two questions appear to be of practical interest: (1) Does the detonation of an SDF charge create electro-magnetic disturbances strong enough to affect the operation of electrical infrastructure in for example a tunnel system? (2) Does the detonation of an SDF charge in a tunnel system create an electromagnetic signature that relays information of the charge performance to the outside environment?

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗