Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extensibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A clarification and extension of our model of regolith formation on hillslopes: A clarification of our model of regolith formation on hillslopes

In this paper we clarify that our weathering model from 2013 did not explicitly describe weathering of soil moving downhill along hillslopes. Additionally, we re-analyze the role of the term that we neglected that describes loss of regolith mass through mineral dissolution. We derive an equation for this term by including lateral flow of water inside the model hill. For the revised hill model, we define a dimensionless parameter that allows estimation of the effect of lateral flow on the steady-state hillslope. This parameter is equal to the ratio of averaged advective flux of dissolved species out of the hill to the rate of total denudation. The parameter also yields a criterion for the existence of a steady state regolith thickness for systems experiencing unidirectional advection at a constant velocity: for a ridge, the rate of downward flow of water (qy) must be less than the rate of upward movement of rock (E) after normalization by a small parameter, α. This parameter is equal to the equilibrium aqueous concentration divided by the concentration of the reacting mineral in the rock. Alternately, a steady state may exist for the case of both vertical and lateral flow in a hill for any value of erosion rate if the Darcy velocities decrease with depth. Subsurface flow systems play an essential role in the existence of both steady-state hillslopes and steady-state regolith thicknesses.

54 ENVIRONMENTAL SCIENCES↗

Extension of lymphocyte viability for radiation biodosimetry: Potential implications for radiological/nuclear mass casualty incidents

Abstract Dicentric chromosome assay (DCA) is routinely used for estimating the absorbed radiation dose in exposed humans. Optimal lymphocyte viability is crucial for reliable dose estimation and most cytogenetic laboratories prefer the receipt of blood samples within 24 to 36 hours after collection. Delays in the shipment/receipt of samples can occur sometimes under certain unforeseen circumstances: (1) Adverse weather conditions, (2) distant location of blood collection sites, and (3) shipping and handling of a large number of samples after radiological/nuclear mass casualty incident(s). To circumvent some of these limitations, we evaluated the suitability of ex vivo irradiated blood samples stored in the presence of phytohemagglutinin (PHA) for 7 days at ambient temperature (22‐24°C) for radiation biodosimetry. Blood samples stored in the presence of PHA for up to 7 days showed a higher mitotic index than blood samples stored without PHA. To verify the use of stored blood samples for DCA, frequencies of X‐rays induced dicentric chromosomes were analyzed in the blood samples that were cultured either 24 hours after exposure or 7 days later after storage. Our results indicate that storage of ex vivo irradiated blood samples in the presence of PHA at ambient temperature was found optimal for DCA and that the radiation doses estimated by dicentric chromosome frequencies were grossly similar between the fresh and stored blood samples. Our study suggests that reliable and accurate biodosimetry results can be obtained for triage using blood samples stored for up to a week at ambient temperature in the presence of PHA.

Smith, Tammy↗

Extension of the Focusable Mass Range in Distance-of-Flight Mass Spectrometry with Multiple Detectors

Since the underlying theory of Distance-of-Flight Mass Spectrometry (DOFMS) was reported in 2007,[1] laboratory results[2, 3] have proven its practical viability. However, these previous implementations of DOFMS considered ion detection only over narrow DOF-detection windows, with 25-mm being the greatest detection length explored. These small mass windows cannot be used to evaluate how DOFMS focusing performs over greater DOF detection lengths and mass ranges. In the present study, we expand on previous studies by placing two spatially selective ion detectors along the detection plane of the DOFMS instrument. Ion signals are simultaneously collected from both DOF detectors in order to simulate DOFMS performance with a longer spatially selective ion detector.

Gundlach-Graham, Alexander W↗

A practical extension of the recursive multi-fidelity model for the emulation of hole closure experiments

We report in regimes of high strain rate, the strength of materials often cannot be measured directly in experiments. Instead, the strength is inferred based on an experimental observable, such as a change in shape, that is matched by simulations supported by a known strength model. In hole closure experiments, the rate and degree to which a central hole in a plate of material closes during a dynamic loading event are used to infer material strength parameters. Due to the complexity of the experiment, many computationally expensive, three-dimensional simulations are necessary to train an emulator for calibration or other analyses. These simulations can be run at multiple grid resolutions, where dense grids are slower but more accurate. In an effort to reduce the computational cost, a combination of simulations with different resolutions can be combined to develop an accurate emulator within a limited training time. We explore the novel design and construction of an appropriate functional recursive multi-fidelity emulator of a strength model for tantalum in hole closure experiments that can be applied to arbitrarily large training data. Hence, by formulating a multi-fidelity model to employ low-fidelity simulations, we were able to reduce the error of our emulator by approximately 81% with only an approximately 1.6% increase in computing resource utilization.

36 MATERIALS SCIENCE↗

RDPM: An Extensible Tool for Resilience Design Patterns Modelling

Resilience to faults, errors, and failures in extreme-scale high-performance computing (HPC) systems is a critical challenge. Resilience design patterns offer a new, structured hardware and software design approach for improving resilience. While prior work focused on developing performance, reliability, and availability models for resilience design patterns, this paper extends it by providing a Resilience Design Patterns Modeling (RDPM) tool which allows (1) exploring performance, reliability, and availability of each resilience design pattern, (2) offering customization of parameters to optimize performance, reliability, and availability, and (3) allowing investigation of trade-off models for combining multiple patterns for practical resilience solutions.

Kumar, Mohit↗

Displaced vertex signatures of doubly charged scalars in the type-II seesaw and its left-right extensions

The type-II seesaw mechanism with an isospin-triplet scalar Δ L provides one of the most compelling explanations for the observed smallness of neutrino masses. The triplet contains a doubly-charged component $H^{±±}_{L}$, which dominantly decays to either same-sign dileptons or to a pair of W bosons, depending on the size of the triplet vacuum expectation value. However, there exists a range of Yukawa couplings ƒ L of the triplet to the charged leptons, wherein a relatively light $H^{±±}_{L}$ tends to be long-lived, giving rise to distinct displaced-vertex signatures at the high-energy colliders. We find that the displaced vertex signals from the leptonic decays $H^{±±}_{L} → ℓ^±_αℓ^±_β$ could probe a broad parameter space with 10 -10 ≲ |ƒ L | ≲ 10 -6 and 45.6 GeV<$M_{H^{±±}_{L}}$≲200 GeV at the high-luminosity LHC. Similar sensitivity can also be achieved at a future 1 TeV e + e - collider. The mass reach can be extended to about 500GeV at a future 100TeV proton-proton collider. Similar conclusions apply for the right-handed triplet $H^{±±}_{R}$ in the TeV-scale left-right symmetric models, which provide a natural embedding of the type-II seesaw. We show that the displaced vertex signals are largely complementary to the prompt same-sign dilepton pair searches at the LHC and the low-energy, high-intensity/precision measurements, such as neutrinoless double beta decay, charged lepton flavor violation, electron and muon anomalous magnetic moments, muonium-antimuonium oscillation and Møller scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of Technological Equipment for RBMK Service-Life Extension

This article is devoted to the solution of the now urgent problem of the aging of the RBMK-1000 graphite stack (bending of the graphite columns as a result of cracking of the graphite blocks under the action of temperature and exposure to radiation). The successful work performed by a group of specialists from the Diakont Company Group on restoring the service-life characteristics of the first two power-generating units at the Leningradskaya NPP is considered as an example. Laying bare the crux of the main stages and particulars of the technological process, considerable attention is given to the principle of operation, technical possibilities, and rigging of unique equipment produced by the Diakont. The development of a complete rigging complex for restoring the service-life characteristics of the reactor plant is given together with a detailed description of the operating principles of each type of equipment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sensitivity of Turbine-Height Wind Speeds to Parameters in the Planetary Boundary-Layer Parametrization Used in the Weather Research and Forecasting Model: Extension to Wintertime Conditions

This work extends the model sensitivity analysis of Yang et al. (Boundary-Layer Meteorology, 2017, Vol. 162, 117-142) to include results for February 2011, in addition to May of the same year. We investigated the sensitivity of simulated hub-height wind speeds to the selection of 26 parameters applied in the Mellor-Yamada-Nakanishi-Niino (MYNN) planetary boundary-layer parameterization in the Weather Research and Forecasting (WRF) model, including parameters used to represent the dissipation of turbulence kinetic energy (TKE), Prandtl number (Pr), and turbulence length scales. Differences in the sensitivity of the ensemble of simulated wind speed to the various parameters can largely be explained by changes in the static stability. The largest monthly differences were found during the day, while the sensitivity to many of the parameters during the night were similar regardless of the month. This finding is consistent with an increased frequency of day-time stable conditions in February compared to May. The spatial variability of the sensitivity to TKE dissipation, Pr, and k can also be attributed to variability in the static stability across the domain at any point in time.

parametrization schemes, Parametric sensitivity, P↗

Preparation of Low-Density Microcellular Foams from Recycled PET Modified by Solid State Polymerization and Chain Extension

Recycled polyethylene-terephthalate (RPET) bottle regrinds were physically foamed after two types of industrially feasible molecular weight increasing processes. Intrinsic viscosity (IV) of initial waste (0.71 dL/g) increased both after reactive extrusion carried out using a multifunctional epoxy-based chain extender (0.74 dL/g) and after solid state polycondensation (SSP) (0.78 dL/g), while capillary rheometry revealed higher degree of branching in the chain extended PET material. Despite the relatively low IV values (below 0.80 dL/g), physical foaming, a mild and cost-efficient way, was successful in both cases, uniform microcellular foam structures with void fractions ranging between 75 and 83% were achieved. During the experiments morphology change in the materials was tracked by differential scanning calorimetry (DSC) besides recording IV values. The IV drop during foaming was between 0.03 and 0.10 depending on the pre-processing technology. Structure of foams produced from the two different modified RPET materials was compared with each other based on scanning electron microscopic imaging of cryogenic fracture surfaces. The average cell diameters were measured to be 213 and 360 µm in the case of chain extended and SSP-modified materials, respectively.

36 MATERIALS SCIENCE↗

Extension of the Concept of Invariance and Statistically Weakly Invariant Sets of Controllable Systems

We continue the study of statistically invariant and statistically weakly invariant sets with respect to controllable systems and differential inclusions launched by Prof. E. L. Tonkov. We examine properties of such statistical characteristics as the lower freq{sub *}(𝜑) and upper freq{sup *}(𝜑) relative frequencies of hitting a solution 𝜑(t) of a differential inclusion in a prescribed set. We obtain estimates and conditions of coincidence of these characteristics for functions whose difference tends to zero at infinity. We also present conditions of statistically weak invariance of a given set of a relatively controllable system.

97 MATHEMATICS AND COMPUTING↗

Offshore Extension of Deccan Traps in Kachchh, Central Western India: Implications for Geological Sequestration Studies

The Deccan basalts in central western India are believed to occupy large onshore-offshore area. Using geophysical and geological observations, onshore sub-surface structural information has been widely reported. On the contrary, information about offshore structural variations has been inadequate due to scarcity of marine geophysical data and lack of onshore-offshore lithological correlations. Till date, merely a few geophysical studies are reported that gauge about the offshore extent of Deccan Traps and the Mesozoic sediments (pre-Deccan). To fill this gap in knowledge, in this article, we present new geophysical evidences to demonstrate offshore continuation of the Deccan volcanics and the Mesozoic sediments. The offshore multi-channel seismic and onshore-offshore lithological correlations presented here confirm that the Mesozoic sedimentary column in this region is overlain by 0.2-1.2-km-thick basaltic cover. Two separate phases of Mesozoic sedimentation, having very distinctive physical and lithological characteristics, are observed between overlying basaltic rocks and underlying Precambrian basement. Using onshore-offshore seismic and borehole data this study provides new insight into the extent of the Deccan basalts and the sub-basalt structures. This study brings out a much clearer picture than that was hitherto available about the offshore continuation of the Deccan Traps and the Mesozoic sediments of Kachchh. Further, its implications in identifying long-term storage of anthropogenic CO{sub 2} within sub-basalt targets are discussed. The carbon sequestration potential has been explored through the geological assessment in terms of the thickness of the strata as well as lithology.

58 GEOSCIENCES↗