Alkene epoxidation by fluorinated-alcohol modified Ti-SBA15
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Presented by NETL at ACS Fall Meeting 08/19
Explore the source record for details and available documents.
Actinide and lanthanide extraction by new solvent: 0.2 M phenyl-octyl-N,N-diiso-butylcarbamoyl-phosphine oxide (CMPO) + 30% TBP + formal of octafluoro-pentanol was studied. A dynamic test with this solvent was performed. It was shown that americium and lanthanides are effectively extracted from PUREX process raffinate. The separation of americium from light lanthanides was confirmed in the modified SETFICS flowsheet with this new solvent. (authors)
Explore the source record for details and available documents.
Both nuclear forensics and environmental sampling depend upon laboratory analysis of nuclear material that has often been exposed to the environment after it has been produced. It is therefore important to understand how those environmental conditions might have changed the chemical composition of the material over time, particularly for chemically sensitive compounds. In the specific case of uranium enrichment facilities, uranium-bearing particles stem from small releases of uranium hexafluoride gas, a highly reactive gas that hydrolyzes upon contact with moisture from the air to form uranium oxyfluoride (UO2F2) particles. The uranium isotopic composition of those particles is used by the International Atomic Energy Agency (IAEA) to verify whether a facility is compliant with its declarations. The present study, however, aims to demonstrate how knowledge of time-dependent changes in chemical composition, particle morphology, and molecular structure can contribute to an even more reliable interpretation of the analytical results.
Based on fluorination technology developed during 1934 to 1959, and the fiber technology developed during the 1970s, a new process was developed to produce graphite fluoride fibers. In the process, pitch based graphitized carbon fibers are at first intercalated and deintercalated several times by bromine and iodine, followed by several cycles of nitrogen heating and fluorination at 350 to 370 C. Electrical, mechanical, and thermal properties of this fiber depend on the fluorination process and the fluorine content of the graphite fluoride product. However, these properties are between those of graphite and those of PTFE (Teflon). Therefore, it is considered to be a semiplastic. The physical properties suggest that this new material may have many new and unexplored applications. For example, it can be a thermally conductive electrical insulator. Its coefficient of thermal expansion (CTE) can be adjusted to match that of silicon, and therefore, it can be a heat sinking printed circuit board which is CTE compatible with silicon. Using these fibers in printed circuit boards may provide improved electrical performance and reliability of the electronics on the board over existing designs. Also, since it releases fluorine at 300 C or higher, it can be used as a material to store fluorine and to conduct fluorination. This application may simplify the fluorination process and reduce the risk of handling fluorine.
Graphite fluoride fibers can be produced by fluorinating pristine or intercalated graphite fibers. The higher the degree of graphitization of the fibers, the higher the temperature needed to reach the same degree of fluorination. Pitched based fibers were fluorinated to flourine-to-carbon atom rations between 0 and 1. The graphite fluoride fibers with a fluorine-to-carbon atom ration near 1 have extensive visible structural damage. On the other hand, fluorination of fibers pretreated with bromine or fluorine and bromine result in fibers with a fluorine-to-carbon atom ratio nearly equal to 0.5 with no visible structural damage. The electrical resistivity of the fibers is dependent upon the fluorine to carbon atom ratio and ranged from .01 to 10 to the 11th ohm/cm. The thermal conductivity of these fibers ranged from 5 to 73 W/m-k, which is much larger than the thermal conductivity of glass, which is the regular filler in epoxy composites. If graphite fluoride fibers are used as a filler in epoxy or PTFE, the resulting composite may be a high thermal conductivity material with an electrical resistivity in either the insulator or semiconductor range. The electrically insulating product may provide heat transfer with lower temperature gradients than many current electrical insulators. Potential applications are presented.
Characterization and potential space applications of graphite fluoride fibers from commercially available graphitized carbon fibers are presented. Graphite fluoride fibers with fluorine to carbon ratios of 0.65 and 0.68 were found to have electrical resistivity values of 10(exp 4) and 10(exp 11) Ohms-cm, respectively, and thermal conductivity values of 24 and 5 W/m-K, respectively. At this fluorine content range, the fibers have tensile strength of 0.25 + or - 0.10 GPa (36 + or - 14 ksi), Young's modulus of 170 + or - 30 GPa (25 + or - 5 Msi). The coefficient of thermal expansion value of a sample with fluorine to carbon ratio of 0.61 was found to be 7 ppm/C. These properties change and approach the graphite value as the fluorine content approach 0. Electrically insulative graphite fluoride fiber is at least five times more thermally conductive than fiberglass. Therefore, it can be used as a heat sinking printed circuit board material for low temperature, long life power electronics in spacecraft. Also, partially fluorinated fiber with tailor-made physical properties to meet the requirements of certain engineering design can be produced. For example, a partially fluorinated fiber could have a predetermined CTE value in -1.5 to 7 ppm/C range and would be suitable for use in solar concentrators in solar dynamic power systems. It could also have a predetermined electrical resistivity value suitable for use as a low observable material. Experimental data indicate that slightly fluorinated graphite fibers are more durable in the atomic oxygen environment than pristine graphite. Therefore, fluorination of graphite used in the construction of spacecraft that would be exposed to the low Earth orbit atomic oxygen may protect defect sites in atomic oxygen protective coatings and therefore decrease the rate of degradation of graphite.
Upon exposure to room-temperature fluorine, intercalated carbon fibers (containing either bromine alone or iodine and bromine together) become heavier and less stable. For Amoco P-100 graphitized carbon fibers which were intercalated with 18 percent bromine by weight, 1 hr of fluorine exposure results in a large weight increase, but causes only a small decrease in thermal stability. More than l hr of fluorine exposure time results in small additional increases in fiber weight, but significant further decreases in fiber thermal stability. Such phenomena do not occur if the fluorine exposure is at 250 C. These observations suggest the mechanism that at room temperature, fluorine is absorbed quickly by the intercalated fibers and intercalated slowly into the fibers. Most of the original intercalates are replaced by fluorine in the process of fluorine intercalation. Under an inert environment, the bromine intercalated fibers are much more thermally stable. After 800 C vacuum heating for two weeks, the brominated fibers lost about 45 percent of their bromine, and their resistivity increased from 64 omega-cm to a range of 95 to 170 micro omega-cm. This is still much lower than the 300 micro omega-cm value for pristine P-100. For practical purposes, in order to preserve their thermal stability, brominated fibers need to be protected from exposure to fluorine at room temperature, or to any intercalate at a temperature where, upon direct contact to graphite, an intercalation compound can easily be formed.
An energy storage device can include a cathode, an anode, and a separator between the cathode and the anode, and an electrolyte where the electrolyte includes one or more additives and/or solvent components selected from vinylene carbonate (VC), vinyl ethylene carbonate (VEC), dimethylacetamide (DMAc), hydro fluorinated ether branched cyclic carbonate, a hydro fluorinated ether ethylene carbonate (HFEEC), hydro fluorinated ether (HFE), and fluorinated ethylene carbonate (FEC). The electrolyte may include a carbonate based solvent and one or more solvent components and/or one or more of vinylene carbonate (VC), vinyl ethylene carbonate (VEC), dimethylacetamide (DMAc), hydro fluorinated ether branched cyclic carbonate, a hydro fluorinated ether ethylene carbonate (HFEEC), hydro fluorinated ether (HFE), and fluorinated ethylene carbonate (FEC).
The {sup 19}F isotropic chemical shifts (δ{sub iso}) of two isomorphic compounds, NbF{sub 5} and TaF{sub 5}, which involve six nonequivalent fluorine sites, have been experimentally determined from the reconstruction of 1D {sup 19}F MAS NMR spectra. In parallel, the corresponding {sup 19}F chemical shielding tensors have been calculated using the GIPAW method for both experimental and DFT-optimized structures. Furthermore, the [M{sub 4}F{sub 20}] units of NbF{sub 5} and TaF{sub 5} being held together by van der Waals interactions, the relevance of Grimme corrections to the DFT optimization processes has been evaluated. However, the semi-empirical dispersion correction term introduced by such a method does not show any significant improvement. Nonetheless, a complete and convincing assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} is obtained, ensured by the linearity between experimental {sup 19}F δ{sub iso} values and calculated {sup 19}F isotropic chemical shielding σ{sub iso} values. The effects of the geometry optimizations have been carefully analyzed, confirming among other matters, the inaccuracy of the experimental structure of NbF{sub 5}. The relationships between the fluorine chemical shifts, the nature of the fluorine atoms (bridging or terminal), the position of the terminal ones (opposite or perpendicular to the bridging ones), the fluorine charges, the ionicity and the length of the M–F bonds have been established. Additionally, for three of the {sup 19}F NMR lines of NbF{sub 5}, distorted multiplets, arising from {sup 1}J-coupling and residual dipolar coupling between the {sup 19}F and {sup 93}Nb nuclei, were simulated yielding to values of {sup 93}Nb–{sup 19}F {sup 1}J-coupling for the corresponding fluorine sites. - Graphical abstract: The complete assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} allow establishing relationships between the {sup 19}F δ{sub iso} values, the nature of the fluorine atoms (bridging or terminal), the position of the terminal ones (opposite or perpendicular to the bridging ones), the fluorine charges, the ionicity and the length of the M–F bonds. Display Omitted - Highlights: • The {sup 19}F δ{sub iso} values of NbF{sub 5} and TaF{sub 5} have been determined. • The {sup 19}F chemical shielding tensors have been calculated using the GIPAW method. • A confident assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} is obtained. • The relationships between the {sup 19}Fδ{sub iso} values and the M–F bonds features are established.
The original specific aims of the grant where cut back considerably as the study section reduced both the time and the budget for the project. The objective of the grant was to show that fluorine-18 fluoride could be prepared completely anhydrous and thus substantially more reactive than conventionally dried fluoride using the method of Sun and DiMagno. This method involved using conventionally dried fluoride to prepare an aromatic fluoride in which the aromatic ring is substituted with electron withdrawing groups. The aryl fluoride is then dried and purified and the fluoride is displaced with an anhydrous nucleophile. Using fluorine-19 and macroscopic scale reactions the reactions work well and give anhydrous fluoride salts that are both more reactive and more selective in their reactions than conventionally dried fluoride. The original substrate chosen for the reaction was bromopentacyanobenzene (1). This compound proved to be easy to make but very hard to purify. As an alternative hexabromobenzene, which is commercially available in high purity, was tried. This reacted cleanly with conventionally dried F-18 fluoride in acetonitrile to give [{sup 18}F]-fluoropentabromobenzene (2), which could be dried by passage of the solution over alumina, which also removed any unreacted fluoride. The fluorine-18 fluoride could be liberated from (2) by displacement with an anhydrous nucleophilic tetra-alkylammonium salt but the anion had to be chosen with considerable care. The reaction is potentially reversible especially as, on the no carrier added scale, there is inevitably an excess of hexabromobenzene and so the displacing nucleophile is chosen to deactivate the aromatic compound to further nucleophilic displacement reactions. To this end tetrabutylammonium azide and tetrabutylammonium phenolate have been tried. Both work but the phenolate is probably the better choice. The F-18 fluoride produced by this process is substantially more reactive than conventionally dried fluoride. A solution of the 3'-anhydrothymidine-5-benzoate (3) was added to the fluoride solution and 30% of the fluoride was incorporated in less than 3 minutes at room temperature were as conventionally dried fluoride requires 10 minutes at 160 C and gives {approx}10% incorporation. These results are encouraging in that they show that the objective of truly anhydrous fluoride is worth pursuing but the problem is that you end up with too much 'stuff' in the solution. Four to five milligrams of hexabromobenzene are used for the initial fluorination reaction and enough of the tetra-alkylammonium salt has to be added to react with a substantial number of those bromides. No attempt has been made to optimize these amounts but there is clearly a lot of material in the solution before the final substrate is added. To avoid these difficulties experiments involving a different, low boiling carrier of the fluoride which can be distilled from the initial fluorination mixture have been tried. Phenyltrifluoromethane sulfonate reacts with fluoride to give trifluoromethane sulfonyl fluoride which boils at -20 C as shown. This reaction works with conventionally dried fluorine-18 fluoride and the no carrier added trifluoromethane sulphonyl fluoride distills out of the reaction as it forms. The choice of nucleophile to react it with to liberate the fluoride is limited and the obvious choice is tetrabutylammonium azide as the resulting trifluoromethane sulfonyl azide is unreactive. We have shown that this works in principle but the experimental details have not been explored.
Fluorine and other halides commonly exist in nuclear waste forms, and due to their volatile nature, halide retention poses an issue affecting waste loading during vitrification. The compositional effect on fluorine incorporation in aluminosilicate glasses is investigated through molecular dynamics simulations. Oxygen and fluorine coordination numbers around glass former and modifier cations, bond angle distributions, and medium range structure features such as Q n distributions, ring size distributions and neutron diffraction structure factors were calculated. It was found that fluorine has higher preference to bond to Ca 2+ than to Na + , both in the melt and the glass, and there is no Si-F bond formation in the glass but they do exist in the melt. Consequently, CaO for Na 2 O substitution can be an effective way to help fluorine retention without significantly changing the glass chemistry. Furthermore, these results thus provide insights on fluorine incorporation in the aluminosilicate nuclear waste glasses and the strategy on how to improve fluorine retention both in the glass and the melt.
The chemical composition of {approx}20-nm-thick anodic layers grown on InAs (111)III in alkaline and acid electrolytes containing or not containing NH{sub 4}F is studied by X-ray photoelectron spectroscopy. It is shown that the composition of fluorinated layers is controlled by the relation between the concentrations of fluorine and hydroxide ions in the electrolyte and by diffusion processes in the growing layer. Fluorine accumulates at the (anodic layer)/InAs interface. Oxidation of InAs in an acid electrolyte with a low oxygen content and a high NH{sub 4}F content brings about the formation of anodic layers with a high content of fluorine and elemental arsenic and the formation of an oxygen-free InF{sub x}/InAs interface. Fluorinated layers grown in an alkaline electrolyte with a high content of O{sup 2-} and/or OH{sup -} groups contain approximately three times less fluorine and consist of indium and arsenic oxyfluorides. No distinction between the compositions of the layers grown in both types of fluorine-free electrolytes is established.
The homoleptic zinc(II) complex of [2,8-di(1-naphthylethynyl) 3,7-diphenyl 1,9-(4-hexylphenyl)azadipyrromethene (ZnL2) 2 ] is a promising non-planar non-fullerene acceptor for organic photovoltaic applications, but it has a relatively low electron mobility that may limit its performance. Here, we explored the fluorination of peripheral aryl groups to increase intermolecular cofacial π–π stacking interactions, which are desirable for electron transport. Here complexes with fluorine on the distal phenyls [Zn(1F-L2) 2 ], on the naphthyls [Zn(2F-L2) 2 ], and on both [Zn(3F-L2) 2 ] were synthesized and characterized. All three complexes had similar optical and electrochemical properties. The crystal packing structure of Zn(2F-L2) 2 and Zn(3F-L2) 2 revealed cofacial parallel-displaced π–π stacking between the fluorinated 1-naphthylethynyl groups. Such a cofacial orientation was not observed in Zn(L2) 2 crystals, suggesting that fluorination of the naphthyl groups promotes the cofacial π–π stacking orientation. The hole mobility increased from 1.0 × 10 –4 cm 2 V –1 s –1 for Zn(L2) 2 to 0.8–1.0 × 10 –3 cm 2 V –1 s –1 for the fluorinated complexes. Fluorination on the naphthyl groups increased the electron mobility from 4.2 × 10 –5 cm 2 V –1 s –1 for Zn(L2) 2 and Zn(1F-L2) 2 to 2.0 × 10 –4 cm 2 V –1 s –1 for Zn(2F-L2) 2 and Zn(3F-L2) 2 , consistent with cofacial π–π stacking being favorable for electron transport. The three complexes were tested in OPVs using regioregular poly(3-hexylthiophene) (P3HT) as the p-type material, and the best power conversion efficiencies were 5.2, 5.4, and 5.8% for Zn(2F-L2) 2 , Zn(1F-L2) 2 , and Zn(3F-L2) 2 , respectively, compared to 5.5% for Zn(L2) 2 . The fluorination combination found in Zn(3F-L2) 2 resulted in the best device performance. This study points to a viable strategy to increase the electron mobility and performance of non-planar zinc(II) complexes of azadipyrromethene.
Reactive Gas Recycling (RGR) technology development has been initiated at Savannah River National Laboratory (SRNL), with a stretch-goal to develop a fully dry recycling technology for Used Nuclear Fuel (UNF). This approach is attractive due to the potential of targeted gas-phase treatment steps to reduce footprint and secondary waste volumes associated with separations relying primarily on traditional technologies, so long as the fluorinators employed in the reaction are recycled for use in the reactors or are optimized for conversion of fluorinator reactant. The developed fluorination via SF 6 , similar to the case for other fluorinators such as NF 3 , can be used to address multiple fuel forms and downstream cycles including continued processing for LWR via fluorination or incorporation into a aqueous process (e.g. modified FLUOREX) or for subsequent pyro treatment to be used in advanced gas reactor designs such metal- or gas-cooled reactors. This report details the most recent experimental results on the reaction of SF 6 with various fission product surrogate materials in the form of oxides and metals, including uranium oxides using a high-temperature DTA apparatus capable of temperatures in excess of 1000°C. The experimental results indicate that the majority of the fission products form stable solid fluorides and sulfides, while a subset of the fission products form volatile fluorides such as molybdenum fluoride and niobium fluoride, as predicted thermodynamically. Additional kinetic analysis has been performed on additional fission products. A key result is the verification that SF 6 requires high temperatures for direct fluorination and subsequent volatilization of uranium oxides to UF 6 , and thus is well positioned as a head-end treatment for other separations technologies, such as the volatilization of uranium oxide by NF 3 as reported by colleagues at PNNL, advanced pyrochemical separations or traditional full recycle approaches. Based on current results of the research at SRNL on SF 6 fluoride volatility for UNF separations, SF 6 treatment renders all anticipated volatile fluorides studied to be volatile, and all non-volatile fluorides studied to be non-volatile, with the notable exception of uranium oxides. This offers an excellent opportunity to use this as a head-end separations treatment process because: 1. SF 6 can be used to remove volatile fluorides from a UNF matrix while leaving behind uranium oxides. Therefore an agent such as NF 3 should be able to very cleanly separate a pure UF 6 stream, leaving compounds in the bottoms such as PuF 4 , SrF 2 and CsF after the UNF matrix has been pre-treated with SF 6 . 2. Due to the fact that the uranium oxide is not separated in the volatilization step upon direct contact with SF 6 at moderately high temperatures (≤ 1000°C), this fluoride approach may be well-suited for head-end processing for Gen IV reactor designs where the LWR is treated as a fuel stock, and it is not desired to separate the uranium from plutonium, but it is desired to separate many of the volatile fission products. 3. It is likely that removal of the volatile fission products from the uranium oxide should simplify both traditional and next generation pyroprocessing techniques. 4. SF 6 treatment to remove volatile fission products, with or without treatment with additional fluorinators, could be used to simplify the separations of traditional aqueous processes in similar fashion to the FLUOREX process. Further research should be conducted to determine the separations efficiency of a combined SF 6 /NF 3 separations approach which could be used as a stand-alone separations technology or a head-end process.