Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} single crystals

The electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} (LTGA) single crystals was studied by nonstoichiometric defect formation during crystal growth. Since stoichiometric LTGA is not congruent, the single crystal grown from the stoichiometric melt was Ta-poor and Al-rich, where Al atoms were substituted not only in Ga sites but also in Ta sites. The population of the substitutional Al in Ta sites increased with increasing oxygen partial pressure during growth (growth-pO{sub 2}) in the range from 0.01 to 1 atm. Below 600 °C, substitutional Al atoms in Ta sites were ionized to yield holes, and thus the electrical conductivity of the LTGA crystal depended on temperature and the growth-pO{sub 2}. The dependence of the electrical conductivity on the growth-pO{sub 2} decreased as temperature increased. The temperature rise increases ionic conductivity, for which the dominant carriers are oxygen defects formed by the anion Frenkel reaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

All-solid-state proton battery using gel polymer electrolyte

A proton conducting gel polymer electrolyte system; PMMA+NH{sub 4}SCN+EC/PC, has been prepared. The highest ionic conductivity obtained from the system is 2.5 × 10−4 S cm{sup −1}. The optimized composition of the gel electrolyte has been used to fabricate a proton battery with Zn/ZnSO{sub 4}⋅7H{sub 2}O anode and MnO{sub 2} cathode. The open circuit voltage of the battery is 1.4 V and the highest energy density is 5.7 W h kg−1 for low current drain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Improved Microwave Semiempirical Model for the Dielectric Behavior of Moist Soils

Soil semiempirical dielectric models (SEMs) are powerful, and they are generally considered a useful hybrid of both empirical and physical models. In this work, the Wang-Schmugge dielectric model is improved to more accurately estimate the relative complex dielectric constants (CDCs) of moist soils. Instead of the Debye relaxation spectrum of liquid water located outside of the soil (i.e., free out-of-soil water) adopted in the Wang-Schmugge model, the Debye relaxation formula related to the free-water component inside the soil [i.e., free soil water (FSW)], which is correlated with the soil texture, is employed in the improved SEM. In addition, the effective conductivity loss term related to both soil texture and soil moisture is introduced to explain the ionic conductivity losses of FSW. Since the soil moisture influence is reduced at high frequencies, the effective conductivity loss term related to only the soil texture is also analyzed for 14-18 GHz. As in the Wang-Schmugge model, the relative CDC of bound soil water varies with the soil volumetric moisture content when the soil moisture is lower than the maximum bound water fraction in the new model, which takes a different approach than the Mironov mineralogy-based SEM. The proposed model obtains better fitting results than the three most widely employed SEMs. Lastly, the improved model exhibits a significantly improved accuracy with a higher correlation coefficient (R²), a closer 1:1 relationship, and a lower root-mean-square error, including in the L-band, and especially in the imaginary part of the L-band.

semiempirical dielectric model (SEM)↗

Correlations from Ion Pairing and the Nernst-Einstein Equation

In this work, we present a new approximation to ionic conductivity well suited to dynamical atomic-scale simulations, based on the Nernst-Einstein equation. In our approximation, ionic aggregates constitute the elementary charge carriers, and are considered as noninteracting species. This approach conveniently captures the dominant effect of ion-ion correlations on conductivity, short range interactions in the form of clustering. In addition to providing better estimates to the conductivity at a lower computational cost than exact approaches, this new method allows us to understand the physical mechanisms driving ion conduction in concentrated electrolytes. As an example, we consider Li + conduction in poly(ethylene oxide), a standard solid-state polymer electrolyte. Using our newly developed approach, we are able to reproduce recent experimental results reporting negative cation transference numbers at high salt concentrations, and to confirm that this effect can be caused by a large population of negatively charged clusters involving cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and properties of solid polymer electrolyte based on chitosan and ZrO{sub 2} nanoparticle for lithium ion battery

In order to develop all solid lithium ion battery, study on the structure and properties of solid polymer electrolytes (SPE) based on chitosan has been done. The SPE were prepared by adding Zirconia (ZrO{sub 2}) nanoparticle and LiClO{sub 4} as lithium salt into the chitosan solution followed by casting method. Effect of the ZrO{sub 2} and salt concentration to the structure and properties of SPE were elaborated using several methods. The structure of the SPE cast film, were characterized mainly by using X-ray diffractometer (XRD). While the electrical properties of SPE were studied by electrochemical impedance spectrometer (EIS) and ion transference number measurement. XRD profiles show that the addition of ZrO{sub 2} and LiClO{sub 4} disrupts the crystality of chitosan. The decrease in sample crytalinity with the nanoparticle and salt addition may increase the molecular mobility result in the increasing sample conductivity and cathionic transference number as determined by EIS and ion transference number measurement, respectively. The highest ionic conductivity (3.58×10{sup −4} S cm{sup −1}) was obtained when 4 wt% of ZrO{sub 2} nanoparticle and 40 wt% of LiClO{sub 4} salt were added to the chitosan. The ion transference number with that composition was 0.55. It is high enough to be used as SPE for lithium ion battery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High temperature conductivity of potassium-beta(double prime)-alumina

Potassium beta(double prime)-alumina (BDPA) single crystals have been reported by several groups to leave higher ionic conductivity than sodium BDPA crystals at room temperature, and similar conductivities are obtained at temperatures up to 600-700 K. Potassium BDPA ceramics have been reported to have significantly poorer conductivities than those of sodium BDPA ceramics, but conductivity measurements at temperatures above 625 K have not been reported. In this study, K(+)-BDPA ceramics were prepared from Na(+)-BDPA ceramic using a modified version of the exchange reaction with KCl vapor reported by Crosbie and Tennenhouse (1982), and the conductivity has been measured in K vapor at temperatures up to 1223 K, using the method of Cole et al. (1979). The results indicate reasonable agreement with earlier data on K(+)-BDPA ceramic measured in a liquid K cell, but show that the K(+)-BDPA ceramic's conductivity approaches that of Na(+)-BDPA ceramic at higher temperatures, being within a factor of four at 700 K and 60 percent of the conductivity of Na(+)-BDPA at T over 1000 K. Both four-probe dc conductivity and four probe ac impedance measurements were used to characterize the conductivity. A rather abrupt change in the grain boundary resistance suggesting a possible phase change in the intergranular material, potassium aluminate, is seen in the ac impedance behavior.

Williams, R. M.↗

Framework Short-Range Order Observed in a Spinel-Type Li Superionic Conductor

Solid-state superionic conductors are characterized by rich structural disorders. Though structural complexities are central to their functionalities, they often give rise to short-range order that eludes detection by conventional diffraction-based techniques and is thus overlooked in establishing precise structure-property relationships. In this work, we synthesized single crystals of a recently discovered lithium (Li) superionic conductor Li16.2(1)In9.00(2)Sn1.10(1)O23.8 (LISO) for in-depth characterizations of structural subtleties. LISO exhibits an unusual spinel-like phase with significant Li overstoichiometry and a face-sharing Li network. Single-crystal neutron diffraction confirms significant Li disorder, as manifested in Li site splitting and partial occupancy. More importantly, synchrotron diffuse scattering combined with 3D-ΔPDF analysis and Monte Carlo simulations reveal short-range order in the nonalkali framework that might contribute to the phase stability and ionic conductivity. This work showcases an example in which subtle local energetics can be directly visualized in structurally disordered ionic conductors.

Chen, Yu↗

Probing the potential of type V Deep eutectic solvents as sustainable electrolytes

The increasing interest within the scientific community in environmentally friendly solvents has led to a focus on Deep Eutectic Solvents (DES), which have natural components. DES are viewed as alternatives to traditional organic solvents and have the potential to be used as electrolytes. For the first time, transport properties of four Type V Deep Eutectic Salt Solutions (DESS) were accessed to investigate the potential of this technology, selecting precursors ranked as excellent in Eco-Scale metrics. The DESS were composed of terpene and trioctylphosphine oxide (TOPO), and varying concentrations of lithium bis(trifluoromethane)sulfonimide (LiTFSI), and their properties were assessed through self-diffusion, viscosity, density, and conductivity measurements. While Type V DESS are capable of dissolving significant amounts of LiTFSI (up to 30 % molar), their ionic conductivity is low, with values ranging from 3.6·10 –3 to 9.3·10 –2 mS·cm –1 at 25 °C, thus limiting their suitability as electrolytes, for instance, for lithium-ions batteries applications. Similar diffusion coefficients for Li + and TFSI – ions suggest the formation of long-lived ion pairs moving as a neutral species. As a result, future research aims to introduce additives to disrupt contact ion pairs and enhance transport properties, leveraging the sustainable appeal of DES and their use in advanced energy storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polycarbonate‐Based Solid‐Polymer Electrolytes for Solid‐State Sodium Batteries

Solid-polymer electrolytes comprised of polypropylene carbonate (PPC) and varied sodium bis(fluorosulfonyl)imide (NaFSI) salt concentrations are investigated for implementation as a conductive solid polymer electrolyte into solid-state cathode composites utilizing a sodium-layered oxide active material. The ionic conductivity generally increases with NaFSI salt content, reaching ≈1 mS cm −1 at 80 °C at the highest salt concentration (PPC:NaFSI = 0.5:1). Through an all-in-one slurry casting method, Na 2/3 Ni 1/3 Mn 2/3 O 2 cathode composites are fabricated in which the dispersed PPC electrolyte acts as the primary binder. Enabled by a bilayer polymer electrolyte system, cycling performance with the PPC cathode electrolyte is optimized with respect to salt concentration and anode material. The best cyclability is achieved with a moderate salt concentration electrolyte (PPC:NaFSI = 5:1), showcasing an initial capacity of 83 mA h g −1 with a remarkable 80% capacity retention after 150 cycles at C/5 rate and 60 °C. The superior performance of the lower salt concentration electrolyte is attributed to better electrochemical stability, as confirmed by linear sweep voltammetry and online electrochemical mass spectrometry measurements. In conclusion, these results underscore the potential of carbonate-based polymer electrolytes and the importance of balancing electrolyte conductivity and stability in cell design.

25 ENERGY STORAGE↗

Infiltrated electrodes for metal supported solid oxide electrolysis cells

Metal-supported solid oxide cells (MSOCs) are an alternative to conventional solid oxide cells (SOCs) based on ceramic cermets, offering lower material costs and higher operational flexibility. In this study symmetric MSOCs with infiltrated electrodes are explored for steam electrolysis operation to understand the underlying operation and degradation principles and suggest a direction for future MSOCs development. Two different fuel electrode backbones are used: an electronically-conductive lanthanum strontium co-doped iron nickel titanate (LSFNT) infiltrated with cerium-gadolinium oxide (CGO), or an ionic conductive zirconia based backbone (10ScYSZ) infiltrated with Ni:CGO. At the oxygen side, the backbone is 10ScYSZ, which is infiltrated with lanthanum-strontium co-doped cobalt oxide (LSC), or praseodymium oxide as cobalt-free alternative for comparison. This study suggests that the backbone electronic conductivity is key for good electrochemical performance as well as for boosting cell durability. Highly electronically conductive nanoparticles, especially nickel, were observed to irreversibly agglomerate driven by thermal conditions, whereas CGO proved to be a very stable electrocatalyst. At the fuel side, CGO (LSFNT) electrode showed lower ASR and degradation rate than Ni:CGO(ScYSZ) configuration with measured values of 0.50 Ω cm2 and 11 %/1000 h (at 0.60 A/cm2), and 0.70 Ω cm2 and 26 %/1000 h (at 0.50 A/cm2) at 1.30 V, respectively (700 °C, 50 % steam in hydrogen at the fuel side and air at the oxygen electrode side, LSC(ScYSZ) oxygen electrode).

25 ENERGY STORAGE↗

Limiting Current in Nanostructured Block Copolymer Electrolytes

The next-generation electrolytes for lithium batteries must be able to conduct ions at sufficiently high current densities; yet this regime is rarely studied directly. The limiting current density of an electrolyte quantifies the highest possible rate of ion transport under an applied dc potential. Herein, we report on the limiting current density in twelve nanostructured polystyrene-block-poly(ethylene oxide) (PS-b-PEO, or SEO) copolymer electrolytes. We find that the limiting current at a given salt concentration increases systematically with increasing volume fraction of the PEO block (φ EO ). In contrast, the effective-medium theory, commonly used to analyze conductivity in block copolymer electrolytes, predicts that limiting current is independent of φ EO . To resolve this conundrum, the ionic conductivity, the mutual diffusion coefficient of the salt, and the steady-state current fraction of the block copolymer electrolytes were measured. These measurements enable predictions of limiting current with no adjustable parameters using the concentrated solution theory. We found quantitative agreement between experimentally measured limiting current densities and predictions based on the concentrated solution theory. This work sheds light on how to reliably measure and predict limiting current density in composite electrolytes.

25 ENERGY STORAGE↗

Study and characterization of the irreversible transformation of electrically stressed planar Ti/TiO{sub x}/Ti junctions

We investigate the properties and characteristics of planar Ti/TiO{sub x}/Ti junctions, which consist of transverse TiO{sub x} lines drawn on Ti test patterns. Junctions are elaborated by means of local anodic oxidation using atomic force microscopy. An irreversible morphological transformation occurring in a reproducible manner is observed when these planar junctions are electrically stressed under ambient atmosphere. Structural and chemical analyses based on transmission electron microscopy techniques reveal the extension of the initial amorphous TiO{sub x} into a crystalline rutile phase. This irreversible transformation is proven to vanish completely if the electrical stress occurs under vacuum atmosphere. Finally, we carry out temperature dependent electrical measurements in order to elucidate their conduction mechanism: Schottky emission above an ultra-low potential barrier is assumed to dominate under vacuum atmosphere whereas ionic conduction seems to prevail in air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anolyte Enhances Catalyst Utilization and Ion Transport Inside a CO 2 Electrolyzer Cathode

Electrochemical CO 2 reduction is a promising technology to capture and convert CO 2 to valuable chemicals. High Faradaic efficiencies of CO 2 reduction products are achieved with zero-gap alkaline CO 2 electrolyzers with a supporting electrolyte at the anode (anolyte). Herein, we investigate the effect of anolyte on the electrode properties such as catalyst utilization, ionic accessibility etc. of a CO 2 reduction cathode using electrochemical techniques and cell configurations that avoid the complexities related to co-electrolysis. Using 1M KOH as the anolyte and a Cu gas-diffusion-electrode with low Nafion content as the model CO 2 reduction electrode, we find that electrode capacitance (proxy for electrochemically active surface area) and ionic conductivity inside the cathode increase approximately 4 and 447 times, respectively, in presence of KOH. Liquid anolyte wets the electrode’s pore structure more efficiently than capillary condensation of feed water vapor. The ionomer coverage is very low, and its distribution inside the electrode is highly fragmented. Surface ion conduction mechanisms inside the electrode are orders of magnitude lower than the bulk ion conduction in presence of anolyte. This study shows that when an anolyte (e.g., KOH) is used, catalyst utilization and ionic accessibility inside the electrode increase significantly.

30 DIRECT ENERGY CONVERSION↗

Predictive Design of Shear-Thickening Electrolytes for Safety Considerations

Non-Newtonian, shear-thickening lithium-ion battery electrolytes show promise for improved safety in high impact events by exhibiting a reversible transition to a solid-like phase under high shear. This aids in the prevention of shorting and subsequent combustion of volatile electrolyte under such conditions. In this work, we investigate the electrodynamics of shear-thickening electrolytes using conductivity under shear measurements, as well as finite-element modeling. We observe an order of magnitude drop in ionic conductivity under shear-thickening conditions. We suggest a working model to explain substantial drops in conductivity observed in shear-thickening electrolytes under shear. Here the results here can be generally applied to any electrolyte that exhibits non-Newtonian hydrodynamic properties.

36 MATERIALS SCIENCE↗

Measurement of Ionic and Electronic Conductivities of Yttria-Stabilized Zirconia by an Embedded Electrode Method

A new technique is presented for the measurement of ionic and electronic conductivities in predominantly oxygen ion conducting materials such as 8YSZ. Cylindrical disc samples of 8YSZ with an embedded Pt wire electrode in the center and two surface porous Pt electrodes were fabricated. When a DC electrical potential is applied across one surface electrode and the embedded electrode, oxygen ions migrate through the YSZ toward the embedded electrode, while electrons transport in the external circuit. In this manner, neutral oxygen is electrochemically pumped to the embedded electrode raising the local oxygen chemical potential. Under the pressure built up, oxygen permeation occurs from the embedded electrode, through the YSZ sample, to the outer surfaces of the sample. In steady state, the electrochemical oxygen flux to the embedded electrode under applied voltage is exactly balanced by out permeation of oxygen governed by the electronic conductivity. Here, using this technique both the ionic and the electronic conductivities of YSZ were measured at a temperature as low as 500°C.

36 MATERIALS SCIENCE↗

Norbornene-Based Polymer Electrolytes for Lithium Cells

Norbornene-based polymers have shown promise as solid electrolytes for lithium-based rechargeable electrochemical cells. These polymers are characterized as single-ion conductors. Single-ion-conducting polymers that can be used in lithium cells have long been sought. Single-ion conductors are preferred to multiple-ion conductors as solid electrolytes because concentration gradients associated with multiple-ion conduction lead to concentration polarization. By minimizing concentration polarization, one can enhance charge and discharge rates. Norbornene sulfonic acid esters have been synthesized by a ring-opening metathesis polymerization technique, using ruthenium-based catalysts. The resulting polymer structures (see figure) include sulfonate ionomers attached to the backbones of the polymer molecules. These molecules are single-ion conductors in that they conduct mobile Li+ ions only; the SO3 anions in these polymers, being tethered to the backbones, do not contribute to ionic conduction. This molecular system is especially attractive in that it is highly amenable to modification through functionalization of the backbone or copolymerization with various monomers. Polymers of this type have been blended with poly(ethylene oxide) to lend mechanical integrity to free-standing films, and the films have been fabricated into solid polymer electrolytes. These electrolytes have been demonstrated to exhibit conductivity of 2 10(exp -5)S/cm (which is high, relative to the conductivities of other solid electrolytes) at ambient temperature, plus acceptably high stability. This type of norbornene-based polymeric solid electrolyte is in the early stages of development. Inasmuch as the method of synthesis of these polymers is inherently flexible and techniques for the fabrication of the polymers into solid electrolytes are amenable to optimization, there is reason to anticipate further improvements.

Cheung, Iris↗

Flexocoupling impact on size effects of piezoresponse and conductance in mixed-type ferroelectric semiconductors under applied pressure

Here, we explore the role of flexoelectric effect in functional properties of nanoscale ferroelectric films with mixed electronic-ionic conductivity. Using a coupled Ginzburg-Landau model, we calculate spontaneous polarization, effective piezoresponse, elastic strain and compliance, carrier concentration, and piezoconductance as a function of thickness and applied pressure. In the absence of flexoelectric coupling, the studied physical quantities manifest well-explored size-induced phase transitions, including transition to paraelectric phase below critical thickness. Similarly, in the absence of external pressure flexoelectric coupling affects properties of these films only weakly. However, the combined effect of flexoelectric coupling and external pressure induces polarizations at the film surfaces, which cause the electric built-in field that destroys the thickness-induced phase transition to paraelectric phase and induces the electretlike state with irreversible spontaneous polarization below critical thickness. Interestingly, the built-in field leads to noticeable increase of the average strain and elastic compliance in this thickness range. We further illustrate that the changes of the electron concentration by several orders of magnitude under positive or negative pressures can lead to the occurrence of high- or low-conductivity states, i.e., the nonvolatile piezoresistive switching, in which the swing can be controlled by the film thickness and flexoelectric coupling. The obtained theoretical results can be of fundamental interest for ferroic systems, and can provide a theoretical model for explanation of a set of recent experimental results on resistive switching and transient polar states in these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗