Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A two-fluid single-column model of turbulent shallow convection, Part III: Results and parameter sensitivity

Two-fluid modelling has recently emerged as a promising approach to representing cumulus convection in weather and climate models. This study applies the two-fluid model described in Part II Thuburn et al., 2021b to a shallow cumulus convection case study over land (ARM). Large eddy simulation data is used to tune the majority of the closures that determine the properties of entrained and detrained air. The two-fluid model is generally able to reproduce the profiles of the mean and turbulent quantities over all stages of the diurnal cycle. As such, the initiation of shallow convection and the evolution of the cloud layer are well captured. The robustness of the two-fluid model is further verified using a steady-state test case (BOMEX), in which the cloud properties are also well modelled.

54 ENVIRONMENTAL SCIENCES↗

Coupling a terrestrial biogeochemical model to the common land model

A terrestrial biogeochemical model (CASACNP) was coupled to a land surface model (the Common Land Model, CoLM) to simulate the dynamics of carbon substrate in soil and its limitation on soil respiration. The combined model, CoLM-CASACNP, was able to predict long-term carbon sources and sinks that CoLM alone could not. The coupled model was tested using measurements of belowground respiration and surface fluxes from two forest ecosystems. The combined model simulated reasonably well the diurnal and seasonal variations of net ecosystem carbon exchange, as well as seasonal variation in the soil respiration rate of both the forest sites chosen for this study. However, the agreement between model simulations and actual measurements was poorer under dry conditions. The model should be tested against more measurements before being applied globally to investigate the feedbacks between the carbon cycle and climate change.

54 ENVIRONMENTAL SCIENCES↗

Scientific Analysis Is Essential to Assess Biofuel Policy Effects

Land-use change (LUC) estimated by economic models has sparked intense international debate. Models estimate how much LUC might be induced under prescribed scenarios and rely on assumptions to generate LUC values. It is critical to test and validate underlying assumptions with empirical evidence. Furthermore, this modeling approach cannot answer if any specific indirect effects are actually caused by biofuel policy. The best way to resolve questions of causation is via scientific methods. Kim and Dale attempt to address the question of if, rather than how much, market-induced land-use change is currently detectable based on the analysis of historic evidence, and in doing so, explore some modeling assumptions behind the drivers of change. Given that there is no accepted approach to estimate the global effects of biofuel policy on land-use change, it is critical to assess the actual effects of policies through careful analysis and interpretation of empirical data. Decision makers need a valid scientific basis for policy decisions on energy choices.

54 ENVIRONMENTAL SCIENCES↗

Does Regional Hydroclimate Change Scale Linearly With Global Warming?

Many aspects of climate change scale linearly with global warming. However, nonlinear changes are possible, especially in the context of hydroclimate, and under emissions scenarios with stabilized global temperature, as aspired to by current climate targets. In CMIP5 and 6, a progressively larger land area shows nonlinear changes as a function of global warming when considering precipitation, evaporation, and soil moisture, with the latter showing nonlinearity over ~50% of global land. Here, using ensemble simulations with the Community Earth System Model 1, in which individual forcing factors are held constant, we illustrate how nonadditive responses to anthropogenic greenhouse gases and industrial and fire-related aerosols can yield complex soil moisture changes in certain regions. This complexity contributes to uncertainty in regional soil moisture projections and suggests that the timing of, as well as model response uncertainty to, future aerosol reductions will have significant impacts on regional hydroclimate change as global temperatures stabilize.

54 ENVIRONMENTAL SCIENCES↗

The Water Balance Representation in Urban‐PLUMBER Land Surface Models

Abstract Urban Land Surface Models (ULSMs) simulate energy and water exchanges between the urban surface and atmosphere. However, earlier systematic ULSM comparison projects assessed the energy balance but ignored the water balance, which is coupled to the energy balance. Here, we analyze the water balance representation in 19 ULSMs participating in the Urban‐PLUMBER project using results for 20 sites spread across a range of climates and urban form characteristics. As observations for most water fluxes are unavailable, we examine the water balance closure, flux timing, and magnitude with a score derived from seven indicators expecting better scoring models to capture the latent heat flux more accurately. We find that the water budget is only closed in 57% of the model‐site combinations assuming closure when annual total incoming fluxes (precipitation and irrigation) fluxes are within 3% of the outgoing (all other) fluxes. Results show the timing is better captured than magnitude. No ULSM has passed all water balance indicators for any site. Models passing more indicators do not capture the latent heat flux more accurately refuting our hypothesis. While output reporting inconsistencies may have negatively affected model performance, our results indicate models could be improved by explicitly verifying water balance closure and revising runoff parameterizations. By expanding ULSM evaluation to the water balance and related to latent heat flux performance, we demonstrate the benefits of evaluating processes with direct feedback mechanisms to the processes of interest.

Jongen, H. J.↗

Integrated policy assessment and optimisation over multiple sustainable development goals in Eastern Africa

Heavy reliance on traditional biomass for household energy in eastern Africa has significant negative health and environmental impacts. The African context for energy access is rather different from historical experiences elsewhere as challenges in achieving energy access have coincided with major climate ambitions. Policies focusing on household energy needs in eastern Africa contribute to at least three Sustainable Development Goals (SDGs): Climate Action, Good Health, and Improved Energy Access. This study uses an integrated assessment model to simulate the impact of land policies and technology subsidies, as well as the interaction of both, on Greenhouse gas (GHG) emissions, exposure to air pollution and energy access in eastern Africa under a range of socioeconomic pathways. We find that land policies focusing on increasing the sustainable output of biomass resources can reduce GHG emissions in the region by about 10%, but also slightly delay progress in health and energy access goals. An optimised portfolio of energy technology subsidies of 11 to 14 dollars per capita up to 2030 can yield another 10% savings in GHG emissions, as well as 20% lower mortality related to air pollution, while improving energy access by up to 15%. After 2030, both land and technology subsidy policies become less cost-effective, and more dependent on the overall development path of the region. The analysis shows that subsidies for biogas technology should be prioritised in both the short and long term, while the distribution of a potential subsidy budget over LPG (health and energy access), PV (energy access), ethanol (climate and health) and charcoal (climate; if linked to land policies) pathways would depend on the most relevant sustainable development goal from the perspective of local policymakers or international organisations such as the Green Climate Fund. We suggest that integrated policy analysis is needed in the African context for simultaneously reaching progress in multiple SDGs.

54 ENVIRONMENTAL SCIENCES↗

Deciphering the sensitivity of urban canopy air temperature to anthropogenic heat flux with a forcing-feedback framework

Abstract The sensitivity of urban canopy air temperature ( T a ) to anthropogenic heat flux ( Q A H ) is known to vary with space and time, but the key factors controlling such spatiotemporal variabilities remain elusive. To quantify the contributions of different physical processes to the magnitude and variability of Δ T a / Δ Q A H (where Δ represents a change), we develop a forcing-feedback framework based on the energy budget of air within the urban canopy layer and apply it to diagnosing Δ T a / Δ Q A H simulated by the Community Land Model Urban over the contiguous United States (CONUS). In summer, the median Δ T a / Δ Q A H is around 0.01 K W m − 2 − 1 over the CONUS. Besides the direct effect of Q A H on T a , there are important feedbacks through changes in the surface temperature, the atmosphere–canopy air heat conductance ( c a ), and the surface–canopy air heat conductance. The positive and negative feedbacks nearly cancel each other out and Δ T a / Δ Q A H is mostly controlled by the direct effect in summer. In winter, Δ T a / Δ Q A H becomes stronger, with the median value increased by about 20% due to weakened negative feedback associated with c a . The spatial and temporal (both seasonal and diurnal) variability of Δ T a / Δ Q A H as well as the nonlinear response of Δ T a to Δ Q A H are strongly related to the variability of c a , highlighting the importance of correctly parameterizing convective heat transfer in urban canopy models.

54 ENVIRONMENTAL SCIENCES↗

Milestone M1 Report: HBM2/3 Evaluation on Many-core CPU WBS 2.4, Milestone ECP-MT-1000

In HIHE01-1, "Evaluate a PathForward/Facilities memory-relevant performance study/analysis," we conducted a focused study on the performance differences between HBM2 and HBM3 as revealed through execution of representative benchmarks. We used measurements on an existing many-core system, Knight's Landing (KNL), to calibrate simulator settings, and then performed Structural Simulation Toolkit (SST) simulations of KNL-like CPUs that access future high bandwidth memories. This report documents our findings.

97 MATHEMATICS AND COMPUTING↗

ORCHIDEE-PEAT (revision 4596), a model for northern peatland CO 2 , water, and energy fluxes on daily to annual scales

Peatlands store substantial amounts of carbon and are vulnerable to climate change. We present a modified version of the Organising Carbon and Hydrology In Dynamic Ecosystems (ORCHIDEE) land surface model for simulating the hydrology, surface energy, and CO 2 fluxes of peatlands on daily to annual timescales. The model includes a separate soil tile in each 0.5° grid cell, defined from a global peatland map and identified with peat-specific soil hydraulic properties. Runoff from non-peat vegetation within a grid cell containing a fraction of peat is routed to this peat soil tile, which maintains shallow water tables. The water table position separates oxic from anoxic decomposition. The model was evaluated against eddy-covariance (EC) observations from 30 northern peatland sites, with the maximum rate of carboxylation ( V cmax ) being optimized at each site. Regarding short-term day-to-day variations, the model performance was good for gross primary production (GPP) ( r 2 = 0.76; Nash–Sutcliffe modeling efficiency, MEF =0.76) and ecosystem respiration (ER, r 2 = 0.78, MEF = 0.75), with lesser accuracy for latent heat fluxes (LE, r 2 2 exchange (NEE, r 2 = 0.38, MEF = 0.26). Seasonal variations in GPP, ER, NEE, and energy fluxes on monthly scales showed moderate to high r 2 values (0.57–0.86). For spatial across-site gradients of annual mean GPP, ER, NEE, and LE, r 2 values of 0.93, 0.89, 0.27, and 0.71 were achieved, respectively. Water table (WT) variation was not well predicted ( r 2 < 0.1), likely due to the uncertain water input to the peat from surrounding areas. However, the poor performance of WT simulation did not greatly affect predictions of ER and NEE. We found a significant relationship between optimized V cmax and latitude (temperature), which better reflects the spatial gradients of annual NEE than using an average V cmax value

58 GEOSCIENCES↗

Augmented Kalman filter with a reduced mechanical model to estimate tower loads on a land-based wind turbine: a step towards digital-twin simulations

This article presents an application of the Kalman filtering technique to estimate loads on a wind turbine. The approach combines a mechanical model and a set of measurements to estimate signals that are not available in the measurements, such as wind speed, thrust, tower position, and tower loads. The model is severalfold faster than real time and is intended to be run online, for instance, to evaluate real-time fatigue life consumption of a field turbine using a digital twin, perform condition monitoring, or assess loads for dedicated control strategies. The mechanical model is built using a Rayleigh–Ritz approach and a set of joint coordinates. We present a general method and illustrate it using a 2-degrees-of-freedom (DOF) model of a wind turbine and using rotor speed, generator torque, pitch, and tower-top acceleration as measurement signals. The different components of the model are tested individually. The overall method is evaluated by computing the errors in estimated tower-bottom-equivalent moment from a set of simulations. From this preliminary study, it appears that the tower-bottom-equivalent moment is obtained with about 10 % accuracy. The limitation of the model and the required steps forward are discussed.

17 WIND ENERGY↗

Experimentally determined aeroacoustic performance and control of several sonic inlets

Low speed wind tunnel tests were conducted to determine the aeroacoustic performance of several model sonic inlets. The results were analyzed to indicate how inlet aeroacoustic characteristics were affected by inlet design and operating conditions. A system for regulating sonic inlet noise reduction was developed and tested. Results indicate that pressure losses at forward velocity may be substantially less than those at static conditions. This is particularly true for translating centerbody inlets with the centerbody extended in the approach and landing position. Operation to simulated takeoff incidence angles of 50 degrees was demonstrated with good inlet performance. Inlet sound pressure level reduction was regulation was regulated to within approximately + or - 1 dB by controlling inlet surface static pressure measured at the diffuser exit.

Miller, B. A.↗