Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC SWITCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Reversible piezomagnetoelectric switching in bulk polycrystalline ceramics

Magnetoelectric (ME) coupling in materials offer tremendous advantages in device functionality enabling technologies including advanced electronic memory, combining electronic speed, and efficiency with magnetic robustness. However, low cost polycrystalline ME materials are excluded from most commercial applications, operating only at cryogenic temperatures, impractically large electric/magnetic fields, or with low ME coefficients (1-100 mV/cm Oe). Despite this, the technological potential of single compound ME coupling has continued to drive research into multiferroics over the last two decades. Here we show that by manipulating the large induced atomic strain within the polycrystalline, room temperature multiferroic compound 0.7BiFeO{sub 3}–0.3PbTiO{sub 3}, we can induce a reversible, piezoelectric strain controlled ME effect. Employing an in situ neutron diffraction experiment, we have demonstrated that this piezomagnetoelectric effect manifests with an applied electric field >8 kV/mm at the onset of piezoelectric strain, engineered in to the compound by crystallographic phase mixing. This produces a remarkable intrinsic ME coefficient of 1276 mV/cm Oe, due to a strain driven modification to the oxygen sub-lattice, inducing an increase in magnetic moment per Fe{sup 3+} ion of +0.142 μ{sub B}. This work provides a framework for investigations into strain engineered nanostructures to realize low-cost ME devices designed from the atoms up, as well as contributing to the deeper understanding of single phase ME coupling mechanisms.

36 MATERIALS SCIENCE↗
NASA NTRS1968

High efficiency, high frequency magnetic deflection driver

Electromagnetic deflection yoke stores energy during the scan and releases it in the flyback or retrace. The operation of the device involves a method of switching to a voltage high enough to dissipate the flyback pulse during the retrace time and then operating during the scan time at a much lower voltage.

Schaff, F. L.↗
DOE OSTI2014

An Electrically Switchable Metal-Organic Framework

Crystalline metal organic framework (MOF) materials containing interconnected porosity can be chemically modified to promote stimulus-driven (light, magnetic or electric fields) structural transformations that can be used in a number of devices. Innovative research strategies are now focused on understanding the role of chemical bond manipulation to reversibly alter the free volume in such structures of critical importance for electro-catalysis, molecular electronics, energy storage technologies, sensor devices and smart membranes. In this letter, we study the mechanism for which an electrically switchable MOF composed of Cu(TCNQ) (TCNQ = 7,7,8,8-tetracyanoquinodimethane) transitions from a high-resistance state to a conducting state in a reversible fashion by an applied potential. The actual mechanism for this reversible electrical switching is still not understood even though a number of reports are available describing the application of electric-field-induced switching of Cu(TCNQ) in device fabrication.

Fernandez, CA↗
DOE OSTI2017

In-situ studies of large magnetostriction in DyCo 2 compound by synchrotron-based high-energy X-ray diffraction

Synchrotron-based high-energy X-ray diffraction is used to explore the physical origin of large magnetostriction in DyCo 2 , an RT 2 compound (R = rare earth, T = Co, Fe), by tracing the crystal structural change as a function of temperature and magnetic field. When the DyCo 2 compound is zero-field cooled down below the Curie temperature T C , the high-temperature cubic lattice is distorted into a tetragonal structure, associated with an expansion of unit cell volume. When a magnetic field is applied gradually from 0 to 6 T below T C , no changes in the peak positions for tetragonal (800) T and (008) T peaks are observed, whereas their relative peak intensities are gradually changed. The intensity changes generated during magnetic field increasing are reversed stepwise with decreasing the magnetic field. Our experimental results suggest that the large magnetostriction in DyCo 2 is caused by the crystallographic domain-switch mechanism (or rearrangement of tetragonal domains). In conclusion, the diffraction elastic strain is not detected under the field up to 6 T. The present investigations provide a fundamental understanding of the mechanisms of the large magnetostriction in RT 2 compounds with Laves phases.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Application of active quenching of second generation wire for current limiting

Superconducting fault current limiters (SFCL's) are increasingly implemented in the power grid as a protection of substation equipment from fault currents. Resistive SFCL's are compact and light, however they are passively triggered and thus may not be sufficiently sensitive to respond to faults in the distribution grid. Here, we explore the prospect of adding an active management feature to a traditional resistive SFCL. A flexible radio-frequency coil, which is an integral part of the switching structure, acts as a triggering device. We show that the application of a short, 10 ms, burst of ac magnetic field during the fault triggers a uniform quench of the wire and significantly reduces the reaction time of the wire at low currents. The ac field burst generates a high density of normal zones, which merge into a continuous resistive region at a rate much faster than that of sparse normal zones created by the transport current alone.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Cooperative Electronic and Structural Regulation in a Bioinspired Allosteric Photoredox Catalyst

Here in this article, we report the first allosteric photoredox catalyst regulated via constructively coupled structural and electronic control. While often synergistically exploited in nature, these two types of control mechanisms have only been applied independently in the vast majority of allosteric enzyme mimics and receptors in the literature. By embedding a model of photosystem II in a supramolecular coordination complex that responds to chloride as an allosteric effector, we show that distance and electronic control of light harvesting can be married to maximize allosteric regulation of catalytic activity. This biomimetic system is composed of a Bodipy photoantenna, which is capable of transferring excited-state energy to a photoredox pair, wherein the excitation energy is used to generate a catalytically active charge-separated state. The structural aspect of allosteric regulation is achieved by toggling the coordination chemistry of an antenna-functionalized hemilabile ligand via partial displacement from a Rh I structual node using chloride. In doing so, the distance between the antenna and the central photoredox catalyst is increased, lowering the inherent efficiency of through-space energy transfer. At the same time, coordination of chloride lowers both the charge of the Rh I node and the reduction potential of the Rh II/I couple, to the extent that electronic quenching of the antenna excited state is possible via photoinduced electron transfer from the metal center. Compared to a previously developed system that operates solely via electronic regulation, the present system demonstrates that coupling electronic and structural approaches to allosteric regulation gives rise to improved switching ratios between catalytically active and inactive states. Contributions from both structural and electronic control mechanisms are probed via nuclear magnetic resonance, X-ray diffraction, electrochemical, spectroelectrochemical, and transient absorption studies. Overall, this work establishes that intertwined electronic and structural regulatory mechanisms can be borrowed from nature to build stimuli-responsive inorganic materials with potential applications in sensing, catalysis, and photonic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Endurance Magneto-Electronic Switchable Molecular Electronic Crystal

Electrically switchable magnetic and electronic properties are promising for quantum sensing and information technology. Here, we report an electrically driven magnetic and electronic phase transition in molecular electronic crystal, potassium-7,7,8,8-tetracyanoquinodimethan, with the magneto-electric switching over 105 cycles at room temperature. Electron spin resonance study reveals the cooperative transition between spin and charge degrees of freedom. In addition, the mechanistic spectroscopy studies suggest the charges in an inhomogeneous conductor–insulator mixed state. Furthermore, the findings shown here suggest electrically controlled ordering in strongly correlated molecular crystal leads to dynamic magneto-electric switching, paving the way for developing molecular-based memory and switching devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Quantum materials for energy-efficient neuromorphic computing: Opportunities and challenges

Neuromorphic computing approaches become increasingly important as we address future needs for efficiently processing massive amounts of data. The unique attributes of quantum materials can help address these needs by enabling new energy-efficient device concepts that implement neuromorphic ideas at the hardware level. In particular, strong correlations give rise to highly non-linear responses, such as conductive phase transitions that can be harnessed for short- and long-term plasticity. Similarly, magnetization dynamics are strongly non-linear and can be utilized for data classification. This Perspective discusses select examples of these approaches and provides an outlook on the current opportunities and challenges for assembling quantum-material-based devices for neuromorphic functionalities into larger emergent complex network systems.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Imaging in 3D under pressure: a decade of high-pressure X-ray microtomography development at GSECARS

The high-pressure X-ray microtomography (HPXMT) apparatus has been operating at the GeoSoilEnviroCARS (GSECARS) bending magnet beamline at the Advanced Photon Source since 2005. By combining the powerful synchrotron X-ray source and fast switching between white (for X-ray diffraction) and monochromatic (for absorption imaging) modes, this technique provides the high-pressure community with a unique opportunity to image the three-dimensional volume, texture, and microstructure of materials under high pressure and temperature. The ability to shear the sample with unlimited strain by twisting the two opposed anvils in the apparatus allows shear deformation studies under extreme pressure and temperature to be performed. HPXMT is a powerful tool for studying the physical properties of both crystalline and non-crystalline materials under high pressure and high temperature. Over the past 10 years, continuous effort has been put into technical development, modifications to improve the overall performance, and additional probing techniques to meet users’ needs. Here in this paper, we present an up-to-date report on the HPXMT system, a brief review of some of its many exciting scientific applications, and a discussion of future developments.

47 OTHER INSTRUMENTATION↗
NASA NTRS1965

Electron-beam deflection controlled by digital signals

Electron-beam deflection in electronic image converters is controlled by a tapped magnetic deflection yoke and a series of current generators. The generators supply equal current to each tap through digitally controlled switches, thereby increasing the inherent accuracy of the system.

Cressey, J. R.↗
NASA NTRS1980

The performance and efficiency of four motor/controller/battery systems for the simpler electric vehicles

A test and analysis program performed on four complete propulsion systems for an urban electric vehicle (EV) is described and results given. A dc series motor and a permanent magnet (PM) motor were tested, each powered by an EV battery pack and controlled by (1) a series/parallel voltage-switching (V-switch) system; and (2) a system using a pulse width modulation, 400 Hz transistorized chopper. Dynamometer tests were first performed, followed by eV performance predictions and data correlating road tests. During dynamometer tests using chopper control; current, voltage, and power were measured on both the battery and motor sides of the chopper, using three types of instrumentation. Conventional dc instruments provided adequate accuracy for eV power and energy measurements, when used on the battery side of the controller. When using the chopper controller, the addition of a small choke inductor improved system efficiency in the lower duty cycle range (some 8% increase at 50% duty cycle) with both types of motors. Overall system efficiency rankings during road tests were: (1) series motor with V-switch; (2) PM motor with V-switch; (3) series motor with chopper; and (4) PM motor with chopper. Chopper control of the eV was smoother and required less driver skill than V-switch control.

Shipps, P. R.↗
NASA NTRS1979

Space applications of superconductivity

Some potential applications of superconductivity in space are summarized, e.g., the use of high field magnets for cosmic ray analysis or energy storage and generation, space applications of digital superconducting devices, such as the Josephson switch and, in the future, a superconducting computer. Other superconducting instrumentation which could be used in space includes: low frequency superconducting sensors, microwave and infrared detectors, instruments for gravitational studies, and high-Q cavities for use as stabilizing elements in clocks and oscillators.

Sullivan, D. B.↗
NASA NTRS1994

System concept definition of the Grumman superconducting Electromagnetic Suspension (EMS) Maglev design

Grumman, under contract to the Army Corps of Engineers, completed a System Concept Definition (SCD) study to design a high-speed 134 m/s (300 m.p.h.) magnetically levitated (Maglev) transportation system. The primary development goals were to design a Maglev that is safe, reliable, environmentally acceptable, and low-cost. The cost issue was a predominant one, since previous studies have shown that an economically viable Maglev system (one that is attractive to investors for future models of passenger and/or freight transportation) requires a cost that is about $12.4 M/km ($20 Million per mile). The design is based on the electromagnetic suspension (EMS) system using superconducting iron-core magnets mounted along both sides of the vehicle. The EMS system has several advantages compared to the electrodynamic suspension (EDS) Maglev systems such as low stray magnetic fields in the passenger cabin and the surrounding areas, uniform load distribution along the full length of the vehicle, and small pole pitch for smoother propulsion and ride comfort. It is also levitated at all speeds and incorporates a wrap-around design of safer operation. The Grumman design has all the advantages of an EMS system identified above, while eliminating (or significantly improving) drawbacks associated with normal magnet powered EMS systems. Improvements include larger gap clearance, lighter weight, lower number of control servos, and higher off line switching speeds. The design also incorporates vehicle tilt (plus or minus 9 deg) for higher coordinated turn and turn out speed capability.

Proise, M.↗
NASA NTRS2018

Simulated Encounters of the Parker Solar Probe with a Coronal-Hole Jet

Solar coronal jets are small, transient, collimated ejections most easily observed in coronal holes (CHs). The upcoming Parker Solar Probe (PSP) mission provides the first opportunity to encounter CH jets in situ near the Sun and examine their internal structure and dynamics. Using projected mission orbital parameters, we have simulated PSP encounters with a fully three-dimensional magnetohydrodynamic (MHD) model of a CH jet. We find that three internal jet regions, featuring different wave modes and levels of compressibility, have distinct identifying signatures detectable by PSP. The leading Alfvén wave front and its immediate wake are characterized by transAlfvénic plasma flows with mild density enhancements. This front exhibits characteristics of a fast switch-on MHD shock, whose arrival is signaled by the sudden onset of large-amplitude transverse velocity and magnetic-field oscillations highly correlated in space and time. The trailing portion is characterized by supersonic but subAlfvénicout flows of dense plasma with uncorrelated velocity and magnetic-field oscillations. This compressible region contains most of the jet's mass. The volume between the immediate wake and dense jet, the remote wake,mixes and transitions the characteristics of the two other regions. In addition to probing each region separately, we also simulate a corotational PSP-jet encounter. In this scenario, the simulated spacecraft hovers over the jet producing CH, as may occur during the mission's corotational phases, sampling each jet region in turn. We estimate that PSP will encounter numerous CH jets over the lifetime of the mission.

Roberts, Merrill A.↗
NASA NTRS1995

Magnetohydrodynamic Riemann problem and the structure of the magnetic reconnection layer

We present a complete solution for a set of magnetohydrodynamic (MHD) Riemann problems in which the upstream and downstream states have the same total pressure, and in which the normal component of the magnetic field is very small. These solutions are pertinent to subfast flows in the earth's magnetic tail and near the magnetopause. In a coplanar situation a family of solutions exists that depend on two parameters as well as on dissapation mechanisms. In the parallel case the transverse magnetic field either does not change direction or changes the direction twice by involving two intermediate shocks. In the antiparallel case an intermediate shock is always required, except when the solution consists of two switch-off shocks. In a noncoplanar case the solution is not self-similar as a function of x/t, but continues to evolve. At early times the evolution is similar to the coplanar case. In general two time-dependent intermediate shocks are required to rotate the magnetic fields. The velocity shear has a strong effect on the Riemann solution. In some cases no Riemann solution can exist because of the cavitation caused by the slow refraction waves. The calculated magnetopause structure resembles the observed structure for northward interplanetary magnetic field (IMF). However, for southward IMF, the MHD result shows the existence of a depletion layer, which is not supported by observations. We also show that on the magnetosheath side, the Walen relation, which is exact for a rotational discontinuity, can also be well satisfied by a slow shock, an intermediate shock, or the head of a slow rarefaction wave.

Wu, C. C.↗
DOE OSTI2015

Multi-band terahertz active device with complementary metamaterial

We describe a multi-band terahertz-active device using a composite structure made of complementary metamaterial and doped silicon that can be dynamically controlled. This special complementary metamaterial exhibits three resonances that produce three pass-bands. The pass-bands can be uniformly manipulated by exploiting the photoinduced characteristics of the doped silicon. Simulations were performed to analyze the magnetic field and surface current distributions. The simulation results agree well with experimental results obtained from terahertz time-domain spectroscopy. Using an 808-nm-wavelength laser beam, a modulation depth of up to 80% was obtained. In numerical simulations, we used a conductivity mode to characterize photoinduction. The development of multi-band terahertz-active devices has many potential applications, for example, in filters, modulators, switches, and sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Switchable orbital polarization and magnetization in strained LaCo O 3 films

Strain engineering of epitaxial heterostructures offers opportunities to control the orbital degree of freedom by lifting the degeneracy of e g states. In this work, we show that the orbital occupation in LaCoO 3 (LCO) films can be switched between two degenerate e g bands with epitaxial strain. The orbital polarization of nearly -100% (or 100%) is controlled by depleting occupation of the d x2-y2 (or d( 3z2-r2 ) orbital entirely in LCO for large compressive (or moderate tensile) strain. The change of electronic configuration associated with the spin-state transition modulates the magnetization of strained LCO films. Under compressive strain, LCO films exhibit a small magnetization without long-range ferromagnetic ordering. With tensile-strain increases, the magnetization of LCO films increases and reaches the maximum value when the bonding angle (Co-O-Co) is close to 180° and the in-plane bond length (Co-O) is unstretched. Our results highlight the role of octahedral distortion and spin-state crossover in tailoring the magnetic properties of cobaltite thin films, indicating an attractive route to deliberately control the orbital polarization that can be tuned to maximize the functionality of oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Manipulating the metal-to-insulator transition and magnetic properties in manganite thin films via epitaxial strain

Strain engineering of epitaxial transition metal oxide heterostructures offers an intriguing opportunity to control electronic structures by modifying the interplay between spin, charge, orbital, and lattice degrees of freedom. Here, we demonstrate that the electronic structure, magnetic and transport properties of La 0.9 Ba 0.1 MnO 3 thin films can be effectively controlled by epitaxial strain. Spectroscopic studies and first-principles calculations reveal that the orbital occupancy in Mn eg orbitals can be switched from the d 3z 2 -r 2 orbital to the d x 2 -y 2 orbital by varying the strain from compressive to tensile. Further, the change of orbital occupancy associated with Mn 3d-O 2p hybridization leads to dramatic modulation of the magnetic and electronic properties of strained La 0.9 Ba 0.1 MnO 3 thin films. Under moderate tensile strain, an emergent ferromagnetic insulating state with an enhanced ferromagnetic Curie temperature of 215 K is achieved. These findings not only deepen our understanding of electronic structures, magnetic and transport properties in the La 0.9 Ba 0.1 MnO 3 system, but also demonstrate the use of epitaxial strain as an effective knob to tune the electronic structures and related physical properties for potential spintronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗