Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Oxidation resistance of quintuple Ti-Al-Si-C-N coatings and associated mechanism

The oxidation behavior of Ti-Al-Si-C-N hard coatings with different Al contents deposited on high-speed steel and Si substrates by hybrid arc-enhanced magnetron sputtering is investigated in the temperature range of 500 Degree-Sign C-1000 Degree-Sign C. The coating hardness is maintained at around 35 GPa, and the parabolic oxidation rate constant K{sub p} at 1000 Degree-Sign C decreases to 3.36 Multiplication-Sign 10{sup -10} kg{sup 2} m{sup -4} s{sup -1} when the Al concentration is increased to 30 at. %, indicating that Ti-Al-Si-C-N coatings with larger Al concentrations have better oxidation resistance. X-ray diffraction, cross-sectional scanning electron microscopy, and x-ray photoelectron spectroscopy reveal a protective surface layer consisting of Al{sub 2}O{sub 3}, TiO{sub 2}, and SiO{sub 2} that retards inward oxygen diffusion. A mechanism is proposed to elucidate the oxide formation. As a consequence of the good oxidation resistance, the Ti-Al-Si-C-N coatings have a large potential in high-speed dry cutting as well as other high temperature applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-layer mirrors for advanced research light sources

X-ray mirrors are needed for beam guidance, beam alignment and monochromatisation at third-generation synchrotron light sources (PETRA III) and forthcoming Free-Electron Lasers (LCLS, European XFEL). Amorphous carbon coatings are currently used as total reflection mirrors at FLASH to guide the photon beam to the various beamlines. These coatings were prepared by means of magnetron sputtering. The new GKSS sputtering facility for the deposition of single and multilayer mirrors with a length of up to 1500 mm and a width of up to 120 mm is in operation. In this contribution we present the results of this new deposition system. A major advantage is that it is now possible to prepare one, two or more mirrors with similar properties over the whole deposition length. The mirror properties were investigated by means of X-ray reflectometry and interference microscopy. The performance of the mirrors is analyzed, considering X-ray reflectivity, film thickness and surface roughness. The uniformity of these properties over the whole deposition length of 1500 mm is demonstrated. The results obtained will be discussed and compared with former results.

43 PARTICLE ACCELERATORS↗

Suppression of superconductivity in epitaxial NbN ultrathin films

This paper studies the suppression of superconducting transition temperature (T{sub c}) of ultrathin NbN film. We fabricated epitaxial NbN superconducting thin films of thicknesses ranging from 2.5 to 100 nm on single crystal MgO (100) substrates by dc magnetron sputtering. We performed structure analyses and measured their electric and far infrared properties. The experimental results were compared with several mechanisms of the suppression of superconductivity proposed in the literature, including the weak localization effect, the proximity effect, and quantum size effect (electron wave leakage model). We found that the electron wave leakage model matches best to the experimental data.

36 MATERIALS SCIENCE↗

Fully epitaxial Fe/MgO/Fe(001) junctions with nonmagnetic metal layer insertion

Fully epitaxial Fe/Ag-wedge/MgO/Fe(001) magnetic tunnel junctions (MTJs) were prepared by using a combination of magnetron sputtering and molecular beam epitaxy, and their magneto-transport properties were investigated for the Ag thickness range of 0-9 monolayer (ML). The large tunneling magnetoresistance (TMR) ratios of up to 160% at room temperature were obtained in the Fe/MgO/Fe region (Ag: 0 ML) after the optimization of the preparation conditions. The finite TMR ratio was observed until the Ag thickness reached 4 ML, although no significant oscillation due to quantum well states (QWS) was seen. This is the first demonstration of TMR in the fully epitaxial MTJs with nonmagnetic metal layer insertion which can potentially create spin-dependent QWS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films

The effect of substrate temperature on the crystallographic texture and surface morphology of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} deposited by rf magnetron sputtering on (111) oriented Pt (150 nm)/Ti (10 nm)/SiO{sub 2} (300 nm)/Si (100) substrates is reported. The onset of crystallinity is observed above 500 deg. C, beyond which all films are oriented along the (111) plane up to a temperature of 800 deg. C. Over this temperature range, the misfit strain and root mean square roughness (rms{sub roughness}) peak at 600 deg. C, decreasing beyond this peak value. The tunability of the dielectric constant at 100 kHz is highest (60% for a field strength of 300 kV/cm) at the lowest values of rms{sub roughness} and misfit strain and decreases as these values increase. It is also shown that the morphology of the Pt underlayers is strongly affected by the processing conditions. This in turn influences the tunable behavior of the BST films as much as the substrate temperature during growth and the consequent microstructural variations.

36 MATERIALS SCIENCE↗

Microstructure and ordering parameter studies in multilayer [FePt(x)/Os]{sub n} films

The microstructure, ordering parameter, and magnetic properties of multilayer [FePt(x)/Os]{sub n} films on glass substrate by dc-magnetron sputtering (with x being thickness in nm; Os with a fixed thickness 5 nm; n being the number of layers) have been studied as a function of the annealing temperatures between 300 and 900 deg. C. The grain size of multilayer films can be controlled by annealing temperature and thickness of the FePt layer with Os space layer. The coercivity as a function of the annealing temperature for samples with n = 1 and pure FePt behaves roughly saturated after annealing above 700 deg. C. However, for samples with n > 4 the value of H{sub c} seems still increasing with increasing annealing temperature between 600 and 900 deg. C, and the ordering parameter decreases with increasing the number of Os layers. Our experimental results are reasonably well to describe the effect of strain-assisted transformation.

36 MATERIALS SCIENCE↗

Magnetic and optical properties of nanocorrugated Co films

Nanostructured Co films were prepared on the top of a polymethyl methacrylate (PMMA) colloidal crystals by magnetron sputtering. Optical reflectance spectra were studied in the range of near UV, IR, and visible light for p- and s-polarizations. Valleys were observed in the spectra and their positions scaled with the PMMA sphere diameter. Both the surface plasmon resonance and the dipole resonance of single Co nanocaps should be considered to explain the obtained results. Magneto-optic measurements showed the qualitative change of the magnetization curve and the enhancement of magneto-optic rotation at wavelength lambda=632 nm in comparison with the control Co film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and magnetic properties of three-dimensional (La,Sr)MnO{sub 3} nanofilms on ZnO nanorod arrays

Three-dimensional (3D) cubic perovskite (La,Sr)MnO{sub 3} (LSMO) nanofilms have been deposited on ZnO nanorod arrays with controlled dimensionality and crystallinity by radio frequency (rf) magnetron sputtering and post thermal annealing. Compared to the two-dimensional (2D) LSMO nanofilm on flat Si, the structure and magnetic properties of 3D LSMO nanofilms on ZnO nanorod arrays have a strong anisotropic morphology and thickness dependence. Ferromagnetic property has been observed in both 2D and 3D LSMO nanofilms while a ferromagnetic-superparamagnetic transition was revaled in 3D LSMO nanofilms on ZnO nanorod array with decreasing nanofilm thickness, due to a large surface dispersion effect. The LSMO/ZnO nanofilm/nanorod structures could open up new avenues for intriguing magnetic properties studies and applications of nanoscale perovskites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of structure and magnetoresistance in Co/ZnO films

Co/ZnO films were deposited on glass substrates by magnetron sputtering at room temperature. The structure of the as-deposited films is studied by means of x-ray diffraction, x-ray photoelectron spectroscopy, and the zero-field-cooled and field-cooled magnetization curves. It is shown that the as-deposited samples consist of a mixture of regions of metallic Co and semiconducting ZnO. Large negative magnetoresistance of 26% and 11.9% are observed in the as-deposited Co/ZnO film with Co concentration of 50.7 at. % at 10 K and room temperature, respectively. Structural analysis, the temperature dependence of the conductivity and magnetoresistance reveal that the magnetoresistance is induced by spin-dependent tunneling between regions of conducting magnetic Co through the ZnO semiconducting barriers. The enhanced magnetoresistance in the low temperature regime may be related to the existence of higher-order tunneling processes between large Co regions mediated by small Co particles.

36 MATERIALS SCIENCE↗

The Role of Ge Wetting Layer and Ge Islands in Si MSM Photodetectors

In this work, Ge thin films were deposited on silicon substrates by radio frequency magnetron sputtering to form Ge islands from Ge layer on Si substrate during post-growth rapid thermal annealing (RTA). The size of the islands decreases from 0.6 to 0.1 as the rapid thermal annealing time increases from 30 s to 60 s at 900 deg. C. Not only that the annealing produces Ge islands but also wetting layer. Energy Dispersive X-ray Spectroscopy (EDX) and Scanning Electron Microscopy (SEM) were employed for structural analysis of Ge islands. Metal-Semiconductor-Metal photodetectors (MSM PDs) were fabricated on Ge islands (and wetting layer)/Si. The Ge islands and wetting layer between the contacts of the fabricated devices are etched in order to see their effects on the device. The performance of the Ge islands MSM-PD was evaluated by dark and photo current-voltage (I-V) measurements at room temperature (RT). It was found that the device with island and wetting layer significantly enhance the current gain (ratio of photo current to dark current) of the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth of Heusler alloy Co{sub 2}MnSi/MgO heterostructures on Ge(001) substrates

We prepared Heusler alloy Co{sub 2}MnSi/MgO heterostructures on single-crystal Ge(001) substrates through magnetron sputtering for Co{sub 2}MnSi and electron beam evaporation for MgO as a promising candidate for future generation spin-based functional devices. Structural investigations showed that the Co{sub 2}MnSi/MgO heterostructure was grown epitaxially on a Ge(001) substrate with extremely smooth and abrupt interfaces and showed the L2{sub 1} structure for the Co{sub 2}MnSi film. Furthermore, a sufficiently high saturation magnetization ({mu}{sub s}) value of 5.1 {mu}{sub B}/f.u. at 10 K, which is close to the theoretically predicted {mu}{sub s} of 5.0 {mu}{sub B}/f.u. for half-metallic Co{sub 2}MnSi, was obtained for prepared Co{sub 2}MnSi films.

36 MATERIALS SCIENCE↗

Large three-photon absorption in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} films studied using Z-scan technique

Large picosecond nonlinearities in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films, grown at different temperatures in situ on (100) MgO substrates using rf magnetron sputtering technique, were studied using the Z-scan technique. The nonlinear absorption mechanism, studied near 800 nm using approx2 and 25 ps pulses, switched from reverse saturable absorption type in the films deposited at temperature<600 deg. C to three-photon absorption (3PA) in the films deposited at temperature>600 deg. C. The magnitude of the 3PA coefficient was estimated to be approx10{sup -21} cm{sup 3}/W{sup 2}. Two-photon absorption (2PA) was the dominant mechanism recorded with approx6 ns pulses. The observed behavior is correlated with morphological and crystallographic texture of the films. The linear refractive index and optical band gap of the films have also been calculated and these show a strong dependence on the substrate temperature.

36 MATERIALS SCIENCE↗

Plasmonic excitations in ZnO/Ag/ZnO multilayer systems: Insight into interface and bulk electronic properties

Electron energy-loss spectroscopy experiments in transmission were carried out on silver-based multi-layer systems, consisting of a silver layer of various thicknesses (8, 10 and 50 nm) sandwiched between two Al-doped ZnO layers. The films were produced by magnetron sputtering using potassium bromide single crystals as substrates. The electronic structure of these systems was probed and analyzed with respect to their plasmonic excitations, which can be basically split up into excitations of the electrons in the bulk silver and excitations at the ZnO:Al/Ag interface. A detailed examination of the momentum dependence of the plasmon peaks revealed a positive dispersion for both, the volume and the interface plasmon, where only for the first one a quadratic behavior (as expected for a free electron gas) could be observed. Furthermore, the peak width was analyzed and set into relation to electrical conductivity measurements by calculating the plasmon lifetime and the electron scattering rate. Here, a good agreement between these different methods was obtained.

36 MATERIALS SCIENCE↗

Fabrication and physical properties of double perovskite SrLaVMoO{sub 6} thin films

SrLaVMoO{sub 6} thin films have been grown on various substrates by magnetron sputtering in Ar+H{sub 2} mixture gas. High-quality c-axis oriented SrLaVMoO{sub 6} films have been obtained in the growth temperature of 630 deg. C and Ar + 5% H{sub 2} mixture gas. The SrLaVMoO{sub 6} films showed low resistive metallic behavior, which is comparable to bulk SrLaVMoO{sub 6}. X-ray photoemission spectroscopy measurements indicate that the dominant valence state for Mo and V in the SrLaVMoO{sub 6} films is tetravalent (Mo{sup 4+}) and trivalent state (V{sup 3+}), respectively.

36 MATERIALS SCIENCE↗

Customizing electron confinement in plasma-assembled Si/AlN nanodots for solar cell applications

Size-uniform Si nanodots (NDs) are synthesized on an AlN buffer layer at low Si(111) substrate temperatures using inductively coupled plasma-assisted magnetron sputtering deposition. High-resolution electron microscopy reveals that the sizes of the Si NDs range from 9 to 30 nm. Room-temperature photoluminescence (PL) spectra indicate that the energy peak shifts from 738 to 778 nm with increasing the ND size. In this system, the quantum confinement effect is fairly strong even for relatively large (up to 25 nm in diameter) NDs, which is promising for the development of the next-generation all-Si tandem solar cells capable of effectively capturing sunlight photons with the energies between 1.7 (infrared: large NDs) and 3.4 eV (ultraviolet: small NDs). The strength of the resulting electron confinement in the Si/AlN ND system is evaluated and justified by analyzing the measured PL spectra using the ionization energy theory approximation.

36 MATERIALS SCIENCE↗

Double hysteresis loop induced by defect dipoles in ferroelectric Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} thin films

Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} (PZT80/20) thin films were deposited on the Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by RF magnetron sputtering. Mainly perovskite crystalline phase with highly (202)-preferred orientation, determined by x-ray diffraction, was formed in the lead zirconate titanate (PZT)(80/20) thin films. Polarization measurements of the unannealed and aged films showed a clear double hysteresis loop. However, the double hysteresis loop phenomenon was greatly suppressed in the PZT thin films annealed under pure oxygen, and thus they exhibited larger remnant polarization (P{sub r} = 6.3 {mu}C/cm{sup 2}). The related mechanism for the appearance of constricted and double hysteresis loops was investigated to be associated with the realignment and disassociation of defect dipoles via oxygen octahedral rotations or oxygen vacancy diffusion. The butterfly-shaped C-V characteristic curve with a valley gave further evidence for double hysteresis loop characteristic in the unannealed and aged PZT thin films.

36 MATERIALS SCIENCE↗

p-type conduction induced by N-doping in {alpha}-Fe{sub 2}O{sub 3}

A p-type N-doped {alpha}-Fe{sub 2}O{sub 3} was developed by magnetron sputtering of a Fe{sub 2}O{sub 3} target in a plasma containing N{sub 2} and Ar followed by postannealing. Photoelectrochemical measurement under visible light irradiation (>410 nm) showed that N-Fe{sub 2}O{sub 3} exhibits a typical cathodic photocurrent originated from the p-type conduction. X-ray photoemission spectroscopy indicated that the atomic N incorporated substitutionally at O sites was responsible for the p-type conduction. The concentration of acceptors was very close to that for Zn-doped Fe{sub 2}O{sub 3}, a typical p-type {alpha}-Fe{sub 2}O{sub 3}. This finding would stimulate further research on p-type Fe{sub 2}O{sub 3} for solar fuel generation, etc.

36 MATERIALS SCIENCE↗