Search NASA⌕ Search

SEARCH · Search NASA

Results for “Main”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Space Shuttle Main Engine (SSME) LOX turbopump pump-end bearing analysis

A simulation of the shaft/bearing system of the Space Shuttle Main Engine Liquid Oxygen turbopump was developed. The simulation model allows the thermal and mechanical characteristics to interact as a realistic simulation of the bearing operating characteristics. The model accounts for single and two phase coolant conditions, and includes the heat generation from bearing friction and fluid stirring. Using the simulation model, parametric analyses were performed on the 45 mm pump-end bearings to investigate the sensitivity of bearing characteristics to contact friction, axial preload, coolant flow rate, coolant inlet temperature and quality, heat transfer coefficients, outer race clearance and misalignment, and the effects of thermally isolating the outer race from the isolator.

Source record↗

Transpression as the main deformational event in an Archaean greenstone belt, northeastern Minnesota

Deformed and metamorphosed sedimentary and volcanic rocks of the Vermilion district constitute an Archean greenstone belt trending east-west between higher grade rocks of the Vermilion Granitic Complex to the north and the Giants Range batholith to the south. Metamorphic grade is low throughout, being lowest in the center of the belt (chlorite zone of the greenschist facies). All the measured strain, a cleavage or schistosity, and a mineral lineation in this belt are attributed to the main phase of deformation D sub 2 that followed an earlier nappe-forming event D sub 1, which left little evidence of penetrative fabric. Previous work assumed that the D sub 2 deformation resulted from north-south compression across the district. It is now believed that a significant component of this deformation resulted from dextral shear across the whole region. Thus the Vermilion fault, a late-state largely strike-slip structure that bounds the Vermilion district to the north, may simply be the latest, most brittle expression of a shear regime that was much more widespread in space and time. Features that are indicative of shear include ductile shear zones with sigmoidal foliation patterns, highly schistose zones with the development of shear bands, feldspar clasts or pyrite cubes with asymmetric pressure shadows, and the fact that the asymmetry of the F sub 2 folds is predominantly Z for at least 15 km south of the Vermilion fault.

Hudleston, P. J.↗

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix B: Data base plots for SSME tests 901-290 through 901-414

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is described. The data base represents dynamic pressure measurements obtained during single engine hot firing tesets of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level. Flow dynamic environments in high performance rocket engines are discussed.

Coffin, T.↗

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix C: Data base plots for SSME tests 902-214 through 902-314

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is reported. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is included to estimate spectral trends with SSME power level. Flow Dynamic Environments in High Performance Rocket Engines are described.

Coffin, T.↗

A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix F: Data base plots for SSME tests 750-120 through 750-200

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is presented. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level.

Coffin, T.↗

A Monte Carlo study of Weibull reliability analysis for space shuttle main engine components

The incorporation of a number of additional capabilities into an existing Weibull analysis computer program and the results of Monte Carlo computer simulation study to evaluate the usefulness of the Weibull methods using samples with a very small number of failures and extensive censoring are discussed. Since the censoring mechanism inherent in the Space Shuttle Main Engine (SSME) data is hard to analyze, it was decided to use a random censoring model, generating censoring times from a uniform probability distribution. Some of the statistical techniques and computer programs that are used in the SSME Weibull analysis are described. The methods documented in were supplemented by adding computer calculations of approximate (using iteractive methods) confidence intervals for several parameters of interest. These calculations are based on a likelihood ratio statistic which is asymptotically a chisquared statistic with one degree of freedom. The assumptions built into the computer simulations are described. The simulation program and the techniques used in it are described there also. Simulation results are tabulated for various combinations of Weibull shape parameters and the numbers of failures in the samples.

Abernethy, K.↗

Investigation and modeling of space shuttle main engine shutdown transient chugging

The space shuttle main engines experience a low frequency pressure pulsation in both the fuel and oxidizer preburners during the shutdown transient. This pressure pulsation, called chugging, has been linked to undesirable bearing loads and possible damage to the spark ignitor supply piping for the fuel preburner. The problem is briefly described and a model is proposed that includes: (1) a transient stirred tank reactor model for the combustion chamber, (2) a resistance capacitance model for the supply piping and (3) purge gas/liquid oxygen interface tracking.

George, P. E., II↗

A data base and analysis program for shuttle main engine dynamic pressure measurements

A dynamic pressure data base management system is described for measurements obtained from space shuttle main engine (SSME) hot firing tests. The data were provided in terms of engine power level and rms pressure time histories, and power spectra of the dynamic pressure measurements at selected times during each test. Test measurements and engine locations are defined along with a discussion of data acquisition and reduction procedures. A description of the data base management analysis system is provided and subroutines developed for obtaining selected measurement means, variances, ranges and other statistics of interest are discussed. A summary of pressure spectra obtained at SSME rated power level is provided for reference. Application of the singular value decomposition technique to spectrum interpolation is discussed and isoplots of interpolated spectra are presented to indicate measurement trends with engine power level. Program listings of the data base management and spectrum interpolation software are given. Appendices are included to document all data base measurements.

Coffin, T.↗

Signal Detection Techniques for Diagnostic Monitoring of Space Shuttle Main Engine Turbomachinery

An investigation to develop, implement, and evaluate signal analysis techniques for the detection and classification of incipient mechanical failures in turbomachinery is reviewed. A brief description of the Space Shuttle Main Engine (SSME) test/measurement program is presented. Signal analysis techniques available to describe dynamic measurement characteristics are reviewed. Time domain and spectral methods are described, and statistical classification in terms of moments is discussed. Several of these waveform analysis techniques have been implemented on a computer and applied to dynamc signals. A laboratory evaluation of the methods with respect to signal detection capability is described. A unique coherence function (the hyper-coherence) was developed through the course of this investigation, which appears promising as a diagnostic tool. This technique and several other non-linear methods of signal analysis are presented and illustrated by application. Software for application of these techniques has been installed on the signal processing system at the NASA/MSFC Systems Dynamics Laboratory.

Coffin, Thomas↗

SSME main combustion chamber and nozzle flowfield analysis

An investigation is presented of the computational fluid dynamics (CFD) tools which would accurately analyze main combustion chamber and nozzle flow. The importance of combustion phenomena and local variations in mixture ratio are fully appreciated; however, the computational aspects of the gas dynamics involved were the sole issues addressed. The CFD analyses made are first compared with conventional nozzle analyses to determine the accuracy for steady flows, and then transient analyses are discussed.

Farmer, R. C.↗

Flow visualization in the Space Shuttle's main engine

The analysis and design of the Space Shuttle's main engine (SSME) power head involved extended finite difference computations conducted on a supercomputer. Certain problems arise, however, in connection with such a computer, and it is pointed out that the massive output from such analyses can actually inhibit insight into physical behavior. It is, therefore, also important to develop effective techniques for computer-user data transfer which match the computer's computational speed. In order to satisfy such requirements, powerful engineering workstations and three-dimensional color computer graphics codes were employed in the computational fluid dynamics (CFD) analyses of the Shuttle's engine. Consequently, the complex physical characteristics of the SSME's hot-gas manifold could be quickly visualized, interpreted, and compared with alternative designs.

Belie, G.↗

Computational fluid dynamics as a design tool for the hot gas manifold of the Space Shuttle Main Engine

The paper discusses the application of computational fluid dynamics as a design tool for the Hot Gas Manifold of the Space Shuttle Main Engine. An improved Hot Gas Manifold configuration was arrived at computationally. This configuration was then built and air flow tested. Testing verified this configuration to be a substantial improvement over existing flight designs.

Ziebarth, J. P.↗

Visualizing flow in the Space Shuttle Main Engine

Ongoing work is described aimed at applying advanced post-processing techniques to interpret and understand the complex flow behavior of the Space Shuttle Main Engine. The use of color graphics and powerful new engineering work stations to effectively present massive amounts of numerical data is emphasized. This combination of tools can result in better designs, faster turnaround, and more complete understanding of complex engineering systems like the Shuttle. Furthermore, it allows engineers access to the massive amounts of data generated by supercomputers and provides a more efficient coupling of man and supercomputer.

Belie, R. G.↗

Space Shuttle Main Engine fuel preburner augmented spark igniter shutdown detonations

Detonations were experienced in the Space Shuttle Main Engine fuel preburner (FPB) augmented spark igniter (ASI) during engine cutoff. Several of these resulted in over pressures sufficient to damage the FPB ASI oxidizer system. The detonations initiated in the FPB ASI oxidizer line when residual oxidizer (oxygen) in the line mixed with backflowing fuel (hydrogen) and detonated. This paper reviews the damage history to the FPB ASI oxidizer system, an engineering assessment of the problem cause, a verification of the mechanisms, the hazards associated with the detonations, and the solution implemented.

Dexter, C. E.↗

Numerical analysis of flow in the hot gas manifold of the Space Shuttle main engine

This paper presents a numerical model and results of analyses carried out to characterize the flow through the two duct configuration of the Hot Gas Manifold of the Space Shuttle Main Engine. Three dimensional computations have been performed for a half-scale air test model using a nonorthogonal body-fitted coordinate system. The calculation domain is extended from the inlet of the turnaround duct to the exit of the transfer duct. Three test cases, one for laminar flow and two for turbulent flow, have been considered. For turbulent flows, constant eddy viscosity and the k-epsilon model of turbulence were employed. As expected, laminar flow calculation predicts much larger pressure drop than turbulent flow cases. The turbulent flow results are in good agreement with the available flow-visualization data. This study and experimental data indicate that the two-transfer duct design will significantly improve the flow distribution in the Hot Gas Manifold and thereby enhance the overall performance of the SSME.

Owens, S. F.↗

Development history of the Space Shuttle Main Engine

The development of the Space Shuttle Main Engine has provided a high performance, reusable component for the Space Transportation System. A discussion of how ground testing identified problems and their resolution paved the way for certification of the engine for flight. A launch summary and a discussion of launch anomalies are included. Continuing improvements and established overhaul criteria are described which will extend the operating life and allow each engine to be used efficiently.

Peterson, T. J.↗