Search NASA⌕ Search

SEARCH · Search NASA

Results for “Matrix diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Electron transfer in a crystalline cytochrome with four hemes

Diffusion of electrons over distances on the order of 100 μm has been observed in crystals of a small tetraheme cytochrome (STC) from Shewanella oneidensis [J. Huang et al . J. Am. Chem. Soc. 142, 10459–10467 (2020)]. Electron transfer between hemes in adjacent subunits of the crystal is slower and more strongly dependent on temperature than had been expected based on semiclassical electron-transfer theory. Here, in this work, we explore explanations for these findings by molecular-dynamics simulations of crystalline and monomeric STC. New procedures are developed for including time-dependent quantum mechanical energy differences in the gap between the energies of the reactant and product states and for evaluating fluctuations of the electronic-interaction matrix element that couples the two hemes. Rate constants for electron transfer are calculated from the time- and temperature-dependent energy gaps, coupling factors, and Franck–Condon-weighted densities of states using an expression with no freely adjustable parameters. Back reactions are considered, as are the effects of various protonation states of the carboxyl groups on the heme side chains. Interactions with water are found to dominate the fluctuations of the energy gap between the reactant and product states. The calculated rate constant for electron transfer from heme IV to heme Ib in a neighboring subunit at 300 K agrees well with the measured value. However, the calculated activation energy of the reaction in the crystal is considerably smaller than observed. We suggest two possible explanations for this discrepancy. The calculated rate constant for transfer from heme I to II within the same subunit of the crystal is about one-third that for monomeric STC in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microhydrological Niches in Soils: How Mucilage and EPS Alter the Biophysical Properties of the Rhizosphere and Other Biological Hotspots

Core Ideas Plant mucilage and bacterial extracellular polymeric substances (EPS) prevent the breakup of the soil liquid phase. Formation of continuous structures buffers soil hydraulic properties. The release of viscous polymeric substances represents a universal strategy. Plant roots and bacteria are capable of buffering erratic fluctuations of water content in their local soil environment by releasing a diverse, highly polymeric blend of substances (e.g. extracellular polymeric substances [EPS] and mucilage). Although this concept is well accepted, the physical mechanisms by which EPS and mucilage interact with the soil matrix and determine the soil water dynamics remain unclear. High‐resolution X‐ray computed tomography revealed that upon drying in porous media, mucilage (from maize [ Zea mays L.] roots) and EPS (from intact biocrusts) form filaments and two‐dimensional interconnected structures spanning across multiple pores. Unlike water, these mucilage and EPS structures connecting soil particles did not break up upon drying, which is explained by the high viscosity and low surface tension of EPS and mucilage. Measurements of water retention and evaporation with soils mixed with seed mucilage show how these one‐ and two‐dimensional pore‐scale structures affect macroscopic hydraulic properties (i.e., they enhance water retention, preserve the continuity of the liquid phase in drying soils, and decrease vapor diffusivity and local drying rates). In conclusion, we propose that the release of viscous polymeric substances and the consequent creation of a network bridging the soil pore space represent a universal strategy of plants and bacteria to engineer their own soil microhydrological niches where stable conditions for life are preserved.

Benard, Pascal↗

A High-Efficiency Delayed Update Algorithm for Evaluating Slater Determinants in Quantum Monte Carlo

For quantum Monte Carlo simulations of molecular systems or supercells with thousands of electrons, matrix operations related to Slater determinants lead the computational cost. McDaniel et al. [J. Chem. Phys. 2017, 147, 174107] proposed a delayed update algorithm to increase computational efficiency by using matrix–matrix multiplication when updating the inverse matrices of Slater determinants. However, preparing intermediate matrices for applying the Sherman–Morrison–Woodbury formula remained a bottleneck. Here, in this work, we introduce an improved algorithm for CPUs and GPUs that (1) reduces this bottleneck by iteratively updating the intermediate matrices and (2) is efficient at any acceptance ratio, with no cost for rejected moves on CPUs and minimal cost on GPUs. We show the full scheme of integrating the delayed update algorithm into a single-electron move. The high efficiency of our algorithm is demonstrated on CPUs and GPUs for a 512 atom/6144 valence electron calculation, with 12× and 2× overall speed-up compared to traditional rank-1 update schemes in diffusion quantum Monte Carlo, respectively.

Luo, Ye [Argonne National Laboratory (ANL), Argonn↗

Morphology-Controlled Discharge Profile and Reversible Cu Extrusion and Dissolution in Biomimetic CuS

Metal sulfides, such as CuS, SnS2, Co9S8, MoS2, are high capacity anode materials for Li-ion batteries. However, these materials go through a conversion reaction with Li+, which is accompanied by the phase transformation and inevitably results in a huge volume expansions, therefore causing performance degradation. Here, we report nanoscale engineering route to efficiently control the overall volume expansion for enhanced performance. We engineered CuS with nanoplate assembly on a nanostring, leading to a nanostructure of mimicking the crassula baby necklace (CBN) in the natural plant. Using in-situ transmission electron microscopy (in-situ TEM), we probed the lithiation kinetics and dynamic structural transformations. Due to the linkage of the central nanostring, the CuS CBN exhibited fast Li+ diffusion along the axial direction and high mechanical stability during lithiation. The volume expansion was minimal for the CuS CBN due to the pre-engineered gap between these plates. The CuS followed a two-step lithiation process with Cu2S and Li2S formation as the first step and Cu extrusion from Cu2S in the later stage. Interestingly, during the Cu2S to Cu conversion, there was a incubation period before the metallic Cu extrusion, which is featured by the formation of an amorphous structure due to the large lattice strain and distortion associated with the displacement of Cu by Li ions. In the final stage, the lithiated amorphous phase recrystallized to a composite of Cu nanocrystals dispersed in a polycrystalline Li2S matrix. Associate with the nanoscale size, the Cu nanocrystals can reversibly dissolve into the matrix upon delithiation. The present work demonstrates tailoring of desired functionality through nanoscale engineering of using bionic methods.

Han, Shaobo↗

Hydrogen Localization and Cluster Formation in α-Zr from First-Principles Investigations

We report alpha-zirconium (α-Zr) is a hydrogen atom host material used in nuclear energy and semiconducting applications due to Zr's excellent properties such as corrosion resistance, low thermal neutrons cross-section, and thermodynamically favorable interstitial sequestering of H atoms. Herein we use density functional theory simulations to systematically analyze the initial stages of H insertion in the Zr matrix, and determine optimal hydrogen localization, distribution, and clustering tendencies from a thermodynamics and kinetics perspective. Our results suggest that H occupation of tetrahedral sites is strongly favored, consistent with previous experimental and theoretical studies. Further, a cooperative effect in H localization is shown where H atoms favor clustering. The H pair is found to be the most stable by occupying tetrahedral sites with pairs at second nearest-neighbor positions (TTn2). Among the four H atom clusters, the most favorable configuration has two TTn2 pairs forming "box " or "zig-zag" shaped-cluster with the pairs separated by 3.03 or 3.25 Å, respectively. Nudged elastic band simulations suggest that the formation of TTn2 is facile and is limited by the small diffusion barrier of the monomer of less than 0.1 eV. Further, the formation routes for the 4H atom clusters are also presented. The current study can serve as a foundation to systematically model H atom clustering in metals and alloys.

36 MATERIALS SCIENCE↗

Mesoscale shock structure in particulate composites

Multiscale experiments in heterogeneous materials and the knowledge of their physics under shock compression are limited. Here, this study examines the multiscale shock response of particulate composites comprised of soda-lime glass particles in a PMMA matrix using full-field high speed digital image correlation (DIC) for the first time. Normal plate impact experiments, and complementary numerical simulations, are conducted at stresses ranging from 1.1 - 3.1 GPa to elucidate the mesoscale mechanisms responsible for the distinct shock structure observed in particulate composites. The particle velocity from the macroscopic measurement at continuum scale shows a relatively smooth velocity profile, with shock thickness decreasing with an increase in shock stress, and the composite exhibits strain rate scaling as the second power of the shock stress. In contrast, the mesoscopic response was highly heterogeneous, which led to a rough shock front and the formation of a train of weak shocks traveling at different velocities. Additionally, the normal shock was seen to diffuse the momentum in the transverse direction, affecting the shock rise and the rounding-off observed at the continuum scale measurements. The numerical simulations indicate that the reflections at the interfaces, wave scattering, and interference of these reflected waves are the primary mechanisms for the observed rough shock fronts.

36 MATERIALS SCIENCE↗

Microstructure evolution and mechanical performance of nickel based superalloy C1023 at elevated temperatures

Highlights: • Growth and strengthening mechanisms of carbide in superalloy C1023 were investigated. • Carbide dendrite primary arm grows selectively based on the vertex of blocky carbonitride. • Monolayer or multilayer carbide dendrite arm has certain crystal relationship with γ′ and γ. • Plastic deformation of γ hinders interior crack propagating from MC to matrix at 650 °C. • Oxidation of GBs significantly weakens the tensile strength of the superalloy at 850 °C. - Abstract: Microstructure evolution of polycrystalline nickel based superalloy C1023 casting was investigated by comparing as cast superalloy and heat treated superalloy in the paper. Influences of strengtheners and carbides on the tensile behaviors of heat treated superalloy at different temperatures (20 °C, 650 °C, and 850 °C) were studied. Resulting data from deep corrosion suggested that growth mode of scripted carbide included nucleation on the vertex of blocky carbonitride, expansion of dendrite arm in C-rich area, and enlargement of dendrite cap. Decomposition of MC carbide generated numerous octahedral M{sub 23}C{sub 6} carbide as well as nanoscale Cr-Mo-rich nuclei. Diffusion of Mo from γ to precipitates such as γ', MC, and M{sub 23}C{sub 6}, occurred during the heat treatment while irregular γ' (4 nm–500 nm) transformed into cuboidal particles. At 650 °C, no significant deterioration of tensile strength was found while plastic deformation ability of γ base was improved. Oxidation of grain boundaries (GBs) dominated the crack behavior of the superalloy at 850 °C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rationalization of Reduced Penetration of Drugs through Ceramide Gel Phase Membrane

Since computing resources have advanced enough to allow routine molecular simulation studies of drug molecules interacting with biologically relevant membranes, a considerable amount of work has been carried out with fluid phospholipid systems. However, there is very little work in the literature on drug interactions with gel phase lipids. This poses a significant limitation for understanding permeation through the stratum corneum where the primary pathway is expected to be through a highly ordered lipid matrix. To address this point, we analyzed the interactions of p-aminobenzoic acid (PABA) and its ethyl (benzocaine) and butyl (butamben) esters with two membrane bilayers, which differ in their fluidity at ambient conditions. We considered a dioleoylphosphatidylcholine (DOPC) bilayer in a fluid state and a ceramide 2 (CER2, ceramide NS) bilayer in a gel phase. We carried out unbiased (100 ns long) and biased z-constraint molecular dynamics simulations and calculated the free energy profiles of all molecules along the bilayer normal. The free energy profiles converged significantly slower for the gel phase. While the compounds have comparable affinities for both membranes, they exhibit penetration barriers almost 3 times higher in the gel phase CER2 bilayer. This elevated barrier and slower diffusion in the CER2 bilayer, which are caused by the high ordering of CER2 lipid chains, explain the low permeability of the gel phase membranes. We also compared the free energy profiles from MD simulations with those obtained from COSMOmic. This method provided the same trends in behavior for the guest molecules in both bilayers; however, the penetration barriers calculated by COSMOmic did not differ between membranes. Finally, we show how membrane fluid properties affect the interaction of drug-like molecules with membranes.

chemistry↗

Random walks on jammed networks: Spectral properties

Using random walk analyses we explore diffusive transport on networks obtained from contacts between isotropically compressed, monodisperse, frictionless sphere packings generated over a range of pressures in the vicinity of the jamming transition p → 0 . For conductive particles in an insulating medium, conduction is determined by the particle contact network with nodes representing particle centers and edges contacts between particles. The transition rate is not homogeneous, but is distributed inhomogeneously due to the randomness of packing and concomitant disorder of the contact network, e.g., the distribution of the coordination number. A narrow escape time scale is used to write a Markov process for random walks on the particle contact network. This stochastic process is analyzed in terms of spectral density of the random, sparse, Euclidean and real, symmetric, positive, semidefinite transition rate matrix. Findings reveal network structures derived from jammed particles have properties similar to ordered, euclidean lattices but also some unique properties that distinguish them from other structures that are in some sense more homogeneous. Specifically, the distribution of eigenvalues of the transition rate matrix follow a power law with spectral dimension 3. Yet, quantitative details of the statistics of the eigenvectors show subtle differences with homogeneous lattices and allow us to distinguish between topological and geometric sources of disorder in the network.

42 ENGINEERING↗

SiC-Based Composite Materials Obtained by Siliconizing Carbon Matrices

We have developed a method for fabrication of parts of complicated configuration from composite materials based on SiC ceramics, which employs the interaction of silicon melt with the carbon matrix having a certain composition and porosity. For elevating the operating temperatures of ceramic components, we have developed a method for depositing protective silicon-carbide coatings that is based on the interaction of the silicon melt and vapor with carbon obtained during thermal splitting of hydrocarbon molecules. The new structural ceramics are characterized by higher operating temperatures; chemical stability; mechanical strength; thermal shock, wear and radiation resistance; and parameters stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial precipitation and hardening mechanism during non-isothermal aging in an Al–Mg–Si–Cu 6005A alloy

The characterization of precipitation and hardening mechanism during non-isothermal aging had been investigated using high resolution transmission electron microscopy for an Al–Mg–Si–Cu 6005A alloy. It was proposed that the needle-shaped β″ precipitates with a three-dimension coherency strain-field and an increased number density in the Al matrix provided the maximum strengthening effect for the Al–Mg–Si–Cu 6005A alloy. Simultaneously, it was also found that the formation and evolution of clusters in the early precipitation were associated with the vacancy binding energy, during which Si atoms played an important role in controlling the numbers density of Mg/Si co-clusters, and the excess Si atoms provided the increased number of nucleation sites for the subsequent precipitates to strengthen and improve the precipitation rate. Finally, based on the experimental observation and theoretical analysis, the precipitation sequence during the early precipitation in the Al–Mg–Si–Cu 6005A alloy was proposed as: supersaturated solid solution → Si-vacancy pairs, Mg-vacancy pairs and Mg clusters → Si clusters, and dissolution of Mg clusters → Mg atoms diffusion into the existing Si clusters → Mg/Si co-clusters → GP zone. - Highlights: • β″ precipitates provide the maximum strengthening effect for the 6005A alloy. • Si atoms play an important role in controlling the numbers of Mg/Si co-clusters. • The early aging sequence is deduced based on the solute-vacancy binding energy.

36 MATERIALS SCIENCE↗

Water confinement in nanoporous silica materials

The influence of the surface polarity of cylindrical silica nanopores and the presence of Na{sup +} ions as compensating charges on the structure and dynamics of confined water has been investigated by molecular dynamics simulations. A comparison between three different matrixes has been included: a protonated nanopore (PP, with SiOH groups), a deprotonated material (DP, with negatively charged surface groups), and a compensated-charge framework (CC, with sodium cations compensating the negative surface charge). The structure of water inside the different pores shows significant differences in terms of layer organization and hydrogen bonding network. Inside the CC pore the innermost layer is lost to be replaced by a quasi bulk phase. The electrostatic field generated by the DP pore is felt from the surface to the centre of pore leading to a strong orientation of water molecules even in the central part of the pore. Water dynamics inside both the PP and DP pores shows significant differences with respect to the CC pore in which the sub-diffusive regime of water is lost for a superdiffusive regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Holography, Gravity and Condensed Matter

Over the five years of funding from this grant, I produced 26 publications. These include a book-long monograph on "Holographic Quantum Matter" that is currently in press with MIT press. The remainder were mostly published in Physical Review Letters, the Journal of High Energy Physics, Nature Physics, Classical and Quantum Gravity and Physical Review B. Over this period, the field of holography applied to condensed matter physics developed from a promising theoretical approach to a mature conceptual and practical edifice, whose ideas were realized in experiments. My own work played a central role in this development. In particular, in the final year of this grant, I co-authored two experimental papers in which ideas that I had developed in earlier years were shown to usefully describe transport in strongly correlated materials — these papers were published in Science and in the Proceedings of the National Academy of Sciences (obviously my contribution to these papers was theoretical). My theoretical work in this period developed several new directions of research that have proven to be influential. These include (i) The construction of highly inhomogeneous black hole event horizons, realizing disordered fixed points and describing new regimes of classical gravity, (ii) The conjecture of a bound on diffusivities that could underpin transport in strongly interacting media — an idea which may be proven in the near future and has turned out to be intimately connected to studies of quantum chaos in black holes and strongly correlated media, (iii) The characterization of new forms of hydrodynamic transport, e.g. with phase-disordered order parameters. These studies pertain to key open questions in our understanding of how non-quasiparticle, intrinsically strongly interacting systems can behave. In addition to the interface between holography and strongly interacting condensed matter systems, I made several advances on understanding the role of entanglement in quantum gravity. These included the first computation of holographic entanglement beyond the bulk classical limit as well understanding short distance entanglement in the emergent spacetime of the c=1 matrix quantum mechanics. The objective here is ultimately to understanding how a priori non-local degrees of freedom can re-arrange themselves quantum mechanically to support emergent local dynamics. Much of work funded by this grant involved collaboration with postdocs and graduate students, several of which were directly funded by the grant. These students have now successfully graduated to postdoctoral positions and in one case to high tech industry. The ideas developed in this work have directly fed into my current research in which I am aiming to prove fundamental bounds on entropy production and transport from quantum mechanics and statistical physics. As often, as with much of my previous work, black hole physics can be an inspiration for extreme dynamics such as fundamental bounds, but ultimately one hopes to prove them using more general tools of quantum field theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FINAL TECHNICAL REPORT

NIST has played a key role in many of the one-on-one, domestic, and international interlaboratory comparisons of measurements on superconductors. The history of interlaboratory comparisons of measurements on superconductors tells us that careful measurement methods are needed to obtain consistent results. Inconsistent results can lead to many problems including: a mistrust of the results of others, unfair advantages in commerce, and erroneous feedback in the optimization of conductor performance. NIST has experience in many interlaboratory comparisons; a long-term commitment to measurement accuracy; and independent, third-party laboratory status. The principal investigator's direct involvement in the measurements and daily supervision of sample mounting is the unique situation that has allowed important discoveries and evolution of our capabilities over the last 30 years. The principal investigator's research and metrology has helped to improve the accuracy of critical-current (I{sub c}) measurements in laboratories throughout the world. As conductors continue to improve and design limits are tested, the continuation of the long-term commitment to measurement accuracy could be vitally important to the success of new conductor development programs. It is extremely important to the U.S. wire manufacturers to get accurate (high certainty) I{sub c} measurements in order to optimize conductor performance. The optimization requires the adjustment of several fabrication parameters (such as reaction time, reaction temperature, conductor design, doping, diffusion barrier, Cu to non-Cu ratio, and twist pitch) based on the I{sub c} measurement of the conductor. If the I{sub c} measurements are made with high variability, it may be unclear whether or not the parameters are being adjusted in the optimal direction or whether or not the conductor meets the target specification. Our metrology is vital to the U.S. wire manufacturers in the highly competitive international arena and to meet the aggressive performance goals. The latest high-performance Nb{sub 3}Sn wires are being designed with higher current densities, larger effective filament diameter, less Cu stabilizer, and, in some cases, larger wire diameters than ever before. In addition, some of the conductor designs and heat treatments cause the residual resistivity ratio (RRR, ratio of room temperature resistivity to the resistivity at 20 K) of the stabilizer to be less than 20. These parameters are pushing the conductors towards less intrinsic stability, into a region we call marginally stable. These parameters also create a whole series of challenges for routine I{sub c} testing on short-samples, even when tested with the sample immersed in liquid helium. High-current, variable-temperature I{sub c} measurements are even more difficult than those made in liquid helium because the sample is only cooled by flowing helium gas. Providing accurate I{sub c} results under these conditions requires a complex system that provide adequate cooling as well as uniform sample temperature. We have been make variable-temperature measurements for about 15 years, but we started to design the first high-current (at least 500 A), variable-temperature, variable-strain apparatus in late 2006. Our first critical-current measurements as a function of strain, temperature, and magnetic field, I{sub c}(B,T,{var_epsilon}), in a new single, unified apparatus (full matrix characterization) were made in the summer of 2008. This is the only such facility in the U.S. and it has some unique components that are not duplicated anywhere in the world. The compounding of all three variables (H, T, {var_epsilon}) makes an already labor and time intensive characterization very formidable; however, the results cannot be generated any other way and are needed to answer key questions about strain and temperature safety margins and about the reliability of using scaling laws based on small data sets to predict performance. In the future, this new apparatus will allow NIST to create a database on strands that would benefit U.S. superconductor wire manufacturers, national research laboratories, and programs using superconductor strands such as HEP and International Thermonuclear Experimental Reactor (ITER).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Conceptual design and optimization for a low-power ADS with a 70 MeV, 0.75 mA proton beam

In the framework of research on Generation IV reactors, it is very important to have infrastructures specifically dedicated to the study of fundamental kinetic and dynamic parameters of future fast-neutron reactors, a capability not provided by many presently available or planned zero-power prototypes. We propose the conceptual design of an ADS with high safety standards, in order to be used as a training facility, but also a good flexibility so as to allow for a wide range of static an dynamic measurements and experiments. A high safety standard is guaranteed by limiting the system power to less than 500 kW and the neutron multiplication coefficient k{sub eff} to less than 0.95 (a limiting value for waste storage areas), by using pure Uranium fuel (no Plutonium) and by using solid Lead as a diffuser. Lead has been chosen by considering this prototype to be a useful step towards the design of future Lead Fast Reactors, as well as because it allows a harder neutron spectrum, which facilitates tests on actinides fission, and provides meaningful data on the physics of this metal, which is one of the proposed coolants for future Generation IV reactors. The system is intrinsically subcritical and it needs an external neutron source to be sustained. Specific goal of the present work is to optimize design features of the core in such a way to meet previously declared requirements with the use of a commercially available accelerator in order to reduce costs and increase reliability. The conceptual design requires, in the 'full configuration', 60 active elements, each made by a solid Lead matrix of dimensions 92 x 92 x 1200 mm{sup 3}, each containing 81 Uranium oxide fuel rods, enriched 20% w/o in {sup 235}U. Protons, coming from a continuous cyclotron of 70 MeV in energy and 0.75 mA in beam current, are converted into neutrons by a Beryllium target. Cooling is provided by Helium gas, transparent to neutron and not subject to activation. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Characterisation of nano-assemblies inside mesopores using neutron scattering

Adsorption of molecular and nanoscale matter in mesoporous materials is important in filtration and chromatography as well as membrane processes. However, the morphology and distribution of self-assembled structures of adsorbate formed within nanoconfined environments is largely unknown. Small Angle Neutron Scattering (SANS) with porous matrix matching the neutron scattering length density of the solvent has the potential to provide detailed information on the self-assemblies formed in pore spaces. However, analysis of such SANS profiles remains a challenge. In this study, we extend the SANS analysis method previously developed by Findenegg and co-workers to include interparticle correlations, providing a qualitative characterisation of the adsorption state of surfactants and nanoparticles in the cylindrical pores of silica nanomaterials. We find that the pore filling fraction and the self-assembled state of the adsorbate governs the scattering profile. We apply the model to two materials namely, triethyleneglycol monohexyl ether (C 6 E 3 ) surfactant and gold nanoparticles adsorbed in SBA-15 mesoporous silica. In contrast to the C 6 E 3 system, Bragg scattering dominates the diffuse scattering in gold nanoparticle system, which we attribute to the immobile internal structure of the nanoparticles. In conclusion, this new SANS analysis method has potential to elucidate structures of soft matter nanoassemblies inside mesopores.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluating quantitative 3-D image analysis as a design tool for low enriched uranium fuel compacts for the transient reactor test facility: A preliminary study

In this study, 3-D image analysis when combined with a non-destructive examination technique such as X-ray computed tomography (CT) provides a highly quantitative tool for the investigation of a material’s structure. In this investigation 3-D image analysis and X-ray CT were combined to analyze the microstructure of a preliminary subsized fuel compact for the Transient Reactor Test Facility’s low enriched uranium conversion program to assess the feasibility of the combined techniques for use in the optimization of the fuel compact fabrication process. The quantitative image analysis focused on determining the size and spatial distribution of the surrogate fuel particles and the size, shape, and orientation of voids within the compact. Additionally, the maximum effect of microstructural features on heat transfer through the carbonaceous matrix of the preliminary compact was estimated. The surrogate fuel particles occupied 0.8% of the compact by volume with a log-normal distribution of particle sizes with a mean diameter of 39 μm and a standard deviation of 16 μm. Roughly 39% of the particles had a diameter greater than the specified maximum particle size of 44 μm suggesting that the particles agglomerate during fabrication. The local volume fraction of particles also varies significantly within the compact although uniformities appear to be evenly dispersed throughout the analysed volume. The voids produced during fabrication were on average plate-like in nature with their major axis oriented perpendicular to the compaction direction of the compact. Finally, the microstructure, mainly the large preferentially oriented voids, may cause a small degree of anisotropy in the thermal diffusivity within the compact. α∥/α⊥, the ratio of thermal diffusivities parallel to and perpendicular to the compaction direction are expected to be no less than 0.95 with an upper bound of 1.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Post-irradiation examination of the Sirius-1 nuclear thermal propulsion fuel test

Nuclear Thermal Propulsion (NTP) systems hold promise in reducing transit times for exploration of the solar system by both crewed and uncrewed missions. NTP systems currently under investigation include a once-through high-temperature gas-cooled fission reactor to provide thermal energy to heat the coolant, which also serves as the propellant. The fuel system consists of angular UN fuel particles dispersed in a matrix of W/Re, creating a ceramic and metallic composite or cermet, which has been irradiated in Idaho National Laboratory's (INL) Transient Reactor Test Facility (TREAT). This enabled evaluation of these materials under representative nuclear heating rates (~95 K/s) and peak surface temperatures (~2527 K). Further, these surface conditions were indicative of achievement of the target peak internal temperature of approximately 2850 K. These tests named Sirius-1 (UN–W/Re), have been irradiated and this paper will present post-irradiation examination results. The Sirius-1 test produced minor, stable cracks in the fuel specimen and spalling of surface material. Volatilized uranium ‘soot’ was found deposited on the inner wall of the irradiation capsule indicating loss of some fissile material from the fuel specimen. Spalling from the surfaces was also noted upon visual inspection. Uranium diffusion from the fuel particles resulted in the formation of U/Re phases and the production of a laminar microstructure on the edge of the fuel system. Overall, the specimen was stable and remained within a coolable geometry upon conclusion of multiple thermal cycles to prototypical operating temperatures.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗