Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Electrode Elastic Modulus as the Dominant Factor in the Capping Effect in Ferroelectric Hafnium Zirconium Oxide Thin Films

The discovery of ferroelectricity in hafnia based thin films has catalyzed significant research focused on understanding the ferroelectric property origins and means to increase stability of the ferroelectric phase. Prior studies have revealed that biaxial tensile stress via an electrode “capping effect” is a suspected ferroelectric phase stabilization mechanism. This effect is commonly reported to stem from a coefficient of thermal expansion (CTE) incongruency between the hafnia and top electrode. Despite reported correlations between ferroelectric phase fraction and electrode CTE, the thick silicon substrate dominates the mechanics and CTE-related stresses, negating any dominant contribution from an electrode CTE mismatch toward the capping effect. In this work, these discrepancies are reconciled, and the origin of these differences deriving from electrode elastic modulus, not CTE, is demonstrated. Pt/M/TaN/Hf 0.5 Zr 0.5 O 2 /TaN/Si devices, where M is platinum, TaN, iridium, tungsten, and ruthenium, were fabricated. Sin 2 (ψ)-based X-ray diffraction measurements of biaxial stress in the HZO layer reveal a strong correlation between biaxial stress, remanent polarization, and electrode elastic modulus. Conversely, a low correlation exists between the electrode CTE, HZO biaxial stress, and remanent polarization. A higher elastic modulus enhances the resistance to electrode elastic deformation, which intensifies the capping effect during crystallization, and culminates in the tandem restriction of out-of-plane hafnia volume expansion and preferential orientation of the polar c-axis normal to the plane. These behaviors concomitantly increase the ferroelectric phase stability and polarization magnitude. This work provides electrode material selection guidelines toward the development of high-performing ferroelectric hafnia into microelectronic devices, such as nonvolatile memories.

36 MATERIALS SCIENCE↗

Supramolecular Control of Ionic Retention in Electrolyte-Gated Synaptic Transistors

Electrolyte-gated transistors with ion-trapping layers offer a promising platform for artificial synapses in neuromorphic computing, yet molecular mechanisms governing ionic retention remain poorly understood. Here, in this study, we present a supramolecular approach to modulate ion retention by incorporating a crown ether derivative-based polymer network as an ion-trapping layer on top of a semiconducting monolayer. We show that the balance between ion–host binding and ion–solvent interactions dictates the kinetics of ion capture and release, which in turn controls the memory characteristics of the device. By varying the solvent dielectric constant, we tune the ionic retention time from nearly permanent trapping to rapid relaxation. Intermediate solvent polarity enables programmable short- and long-term synaptic behaviors, including excitatory postsynaptic current, paired-pulse facilitation, and long-term potentiation and depression. These findings establish a direct link between supramolecular ion recognition and synaptic plasticity and provide a generalizable design strategy for ionic–electronic neuromorphic devices.

36 MATERIALS SCIENCE↗

Magnetoelectric behavior via a spin state transition

Abstract In magnetoelectric materials, magnetic and dielectric/ferroelectric properties couple to each other. This coupling could enable lower power consumption and new functionalities in devices such as sensors, memories and transducers, since voltages instead of electric currents are sensing and controlling the magnetic state. We explore a different approach to magnetoelectric coupling in which we use the magnetic spin state instead of the more traditional ferro or antiferromagnetic order to couple to electric properties. In our molecular compound, magnetic field induces a spin crossover from the S = 1 to the S = 2 state of Mn 3+ , which in turn generates molecular distortions and electric dipoles. These dipoles couple to the magnetic easy axis, and form different polar, antipolar and paraelectric phases vs magnetic field and temperature. Spin crossover compounds are a large class of materials where the spin state can modify the structure, and here we demonstrate that this is a route to magnetoelectric coupling.

36 MATERIALS SCIENCE↗

Effects of Oxygen Modification on the Structural and Magnetic Properties of Highly Epitaxial La0.7Sr0.3MnO3 (LSMO) thin films

Abstract La 0.7 Sr 0.3 MnO 3 , a strong semi-metallic ferromagnet having robust spin polarization and magnetic transition temperature ( T C ) well above 300 K, has attracted significant attention as a possible candidate for a wide range of memory, spintronic, and multifunctional devices. Since varying the oxygen partial pressure during growth is likely to change the structural and other physical functionalities of La 0.7 Sr 0.3 MnO 3 (LSMO) films, here we report detailed investigations on structure, along with magnetic behavior of LSMO films with same thickness (~30 nm) but synthesized at various oxygen partial pressures: 10, 30, 50, 100, 150, 200 and 250 mTorr. The observation of only ( 00 l ) reflections without any secondary peaks in the XRD patterns confirms the high-quality synthesis of the above-mentioned films. Surface morphology of the films reveals that these films are very smooth with low roughness, the thin films synthesized at 150 mTorr having the lowest average roughness. The increasing of magnetic T C and sharpness of the magnetic phase transitions with increasing oxygen growth pressure suggests that by decreasing the oxygen growth pressure leads to oxygen deficiencies in grown films which induce oxygen inhomogeneity. Thin films grown at 150 mTorr exhibits the highest magnetization with T C = 340 K as these thin films possess the lowest roughness and might exhibit lowest oxygen vacancies and defects. Interpretation and significance of these results in the 30 nm LSMO thin films prepared at different oxygen growth pressures are also presented, along with the existence and growth pressure dependence of negative remanent magnetization (NRM) of the above-mentioned thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain-induced magnetism in MoS{sub 2} monolayer with defects

The strain-induced magnetism is observed in single-layer MoS{sub 2} with atomic single vacancies from density functional calculations. Calculated magnetic moment is no less than 2 μ{sub B} per vacancy defect. The strain-induced band gap closure is concurrent with the occurrence of the magnetism. Possible physical mechanism of the emergence of strain-induced magnetism is illustrated. We also demonstrate the possibility to test the predicted magnetism in experiment. Our study may provide an opportunity for the design of new type of memory-switching or logic devices by using earth-rich nonmagnetic materials MoS{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of hydrogen patterning gas on electric and magnetic properties of perpendicular magnetic tunnel junctions

To identify the degradation mechanism in magnetic tunnel junctions (MTJs) using hydrogen, the properties of the MTJs were measured by applying an additional hydrogen etch process and a hydrogen plasma process to the patterned MTJs. In these studies, an additional 50 s hydrogen etch process caused the magnetoresistance (MR) to decrease from 103% to 14.7% and the resistance (R) to increase from 6.5 kΩ to 39 kΩ. Moreover, an additional 500 s hydrogen plasma process decreased the MR from 103% to 74% and increased R from 6.5 kΩ to 13.9 kΩ. These results show that MTJs can be damaged by the hydrogen plasma process as well as by the hydrogen etch process, as the atomic bonds in MgO may break and react with the exposed hydrogen gas. Compounds such as MgO hydrate very easily. We also calculated the damaged layer width (DLW) of the patterned MTJs after the hydrogen etching and plasma processes, to evaluate the downscaling limitations of spin-transfer-torque magnetic random-access memory (STT-MRAM) devices. With these calculations, the maximum DLWs at each side of the MTJ, generated by the etching and plasma processes, were 23.8 nm and 12.8 nm, respectively. This result validates that the hydrogen-based MTJ patterning processes cannot be used exclusively in STT-MRAMs beyond 20 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ high resolution transmission electron microscopy observation of silicon nanocrystal nucleation in a SiO{sub 2} bilayered matrix

Solid-state nucleation of Si nanocrystals in a SiO{sub 2} bilayered matrix was observed at temperatures as low as 450 °C. This was achieved by aberration corrected high-resolution transmission electron microscopy (HRTEM) with real-time in-situ heating up to 600 °C. This technique is a valuable characterization tool especially with the recent interest in Si nanostructures for light emitting devices, non-volatile memories, and third-generation photovoltaics which all typically require a heating step in their fabrication. The control of size, shape, and distribution of the Si nanocrystals are critical for these applications. This experimental study involves in-situ observation of the nucleation of Si nanocrystals in a SiO{sub 2} bilayered matrix fabricated through radio frequency co-sputtering. The results show that the shapes of Si nanocrystals in amorphous SiO{sub 2} bilayered matrices are irregular and not spherical, in contrast to many claims in the literature. Furthermore, the Si nanocrystals are well confined within their layers by the amorphous SiO{sub 2}. This study demonstrates the potential of in-situ HRTEM as a tool to observe the real time nucleation of Si nanocrystals in a SiO{sub 2} bilayered matrix. Furthermore, ideas for improvements on this in-situ heating HRTEM technique are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of energy-barrier lowering by incoherent switching in spin-transfer torque magnetoresistive random-access memory

To make a useful spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device, it is necessary to be able to calculate switching rates, which determine the error rates of the device. In a single-macrospin model, one can use a Fokker-Planck equation to obtain a low-current thermally activated rate ∝exp(−E{sub eff}/k{sub B}T). Here, the effective energy barrier E{sub eff} scales with the single-macrospin energy barrier KV, where K is the effective anisotropy energy density and V the volume. A long-standing paradox in this field is that the actual energy barrier appears to be much smaller than this. It has been suggested that incoherent motions may lower the barrier, but this has proved difficult to quantify. In the present paper, we show that the coherent precession has a magnetostatic instability, which allows quantitative estimation of the energy barrier and may resolve the paradox.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conducting mechanisms of forming-free TiW/Cu{sub 2}O/Cu memristive devices

P-type Cu{sub 2}O is a promising CMOS-compatible candidate to fabricate memristive devices for next-generation memory, logic and neuromorphic computing. In this letter, the microscopic switching and conducting mechanisms in TiW/Cu{sub 2}O/Cu memristive devices have been thoroughly investigated. The bipolar resistive switching behaviors without an electro-forming process are ascribed to the formation and rupture of the conducting filaments composed of copper vacancies. In the low resistive state, the transport of electrons in the filaments follows Mott's variable range hopping theory. When the devices switch back to high resistive state, the coexistence of Schottky emission at the Cu/Cu{sub 2}O interface and electron hopping between the residual filaments is found to dominate the conducting process. Our results will contribute to the further understanding and optimization of p-type memristive materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of magnetic relaxation by electric-field-induced ferroelectric phase transition and inhomogeneous domain switching

Electric-field modulation of magnetism in strain-mediated multiferroic heterostructures is considered a promising scheme for enabling memory and magnetic microwave devices with ultralow power consumption. However, it is not well understood how electric-field-induced strain influences magnetic relaxation, an important physical process for device applications. Here, we investigate resonant magnetization dynamics in ferromagnet/ferroelectric multiferroic heterostructures, FeGaB/PMN-PT and NiFe/PMN-PT, in two distinct strain states provided by electric-field-induced ferroelectric phase transition. The strain not only modifies magnetic anisotropy but also magnetic relaxation. In FeGaB/PMN-PT, we observe a nearly two-fold change in intrinsic Gilbert damping by electric field, which is attributed to strain-induced tuning of spin-orbit coupling. By contrast, a small but measurable change in extrinsic linewidth broadening is attributed to inhomogeneous ferroelastic domain switching during the phase transition of the PMN-PT substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Operando x-ray photoelectron emission microscopy for studying forward and reverse biased silicon p-n junctions

Significant progress in the understanding of surfaces and interfaces of materials for new technologies requires operando studies, i.e., measurement of chemical, electronic, and magnetic properties under external stimulus (such as mechanical strain, optical illumination, or electric fields) applied in situ in order to approach real operating conditions. Electron microscopy attracts much interest, thanks to its ability to determine semiconductor doping at various scales in devices. Spectroscopic photoelectron emission microscopy (PEEM) is particularly powerful since it combines high spatial and energy resolution, allowing a comprehensive analysis of local work function, chemistry, and electronic structure using secondary, core level, and valence band electrons, respectively. Here we present the first operando spectroscopic PEEM study of a planar Si p-n junction under forward and reverse bias. The method can be used to characterize a vast range of materials at near device scales such as resistive oxides, conducting bridge memories and domain wall arrays in ferroelectrics photovoltaic devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Perpendicular magnetic tunnel junction performance under mechanical strain

We investigate effect of the mechanical stress on the performance of magnetic tunnel junctions with perpendicular magnetic anisotropy. We developed a 4-point bending setup that allows us to apply a constant stress over a large substrate area with access to electrical measurements and an external magnetic field. This setup enables us to measure key device performance parameters, such as tunnel magnetoresistance, switching current ( I c 50 % ), and thermal stability (Δ), as a function of applied stress. Finally, we find that variations in these parameters are negligible: less than 2% over the entire measured range between the zero stress condition and the maximum stress at the point of wafer breakage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature multiferroicity and magnetodielectric coupling in 0–3 composite thin films

Magnetoelectric (ME) composite thin films are promising candidates for novel applications in future nanoelectronics, spintronics, memory and other multifunctional devices as they exhibit much higher ME coupling and transition temperatures (Tc) than well-known single phase multiferroics discovered to date. Among the three types of multiferroic composite nanostructures, (2-2) layered and (1-3) vertically aligned composite nanostructures exhibit comparatively smaller ME coupling due to different shortcomings which restrict their use in many applications. Here we study the morphological, piezoresponse force microscopic (PFM), ferroelectric, magnetic, and magnetodielectric properties of 0-3 (magnetic nanoparticles (0) homogeneously distributed in ferroelectric matrices (3)) multiferroic composite thin films. The Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) - Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO) particulate composite films were synthesized by pulsed laser deposition (PLD). These particulate composite thin films are completely c-axis oriented with very low surface roughness. We observed magnetic and ferroelectric T c above room temperature (RT) for all composite thin films. The PFN-NZFO 0-3 composites exhibit large polarization, high saturated magnetization with low coercive field, low dielectric loss along with magnetodielectric coupling at RT. These nanocomposites might be utilized in next generation nano/microelectronics and spintronic devices.

36 MATERIALS SCIENCE↗

Computational discovery of two-dimensional rare-earth iodides: promising ferrovalley materials for valleytronics

Two-dimensional Ferrovalley materials with intrinsic valley polarization are rare but highly promising for valley-based nonvolatile random access memory and valley filter devices. These ferromagnetic materials exhibit valleys at or near the Fermi level with intrinsic magnetism. The strong coupling between magnetism and spin–orbit coupling induces intrinsic valley polarization. Using Kinetically Limited Minimization, an unconstrained crystal structure prediction algorithm, and prototype sampling based on first-principles calculations, we have discovered new Ferrovalley materials, rare-earth iodides RI 2 , where R is a rare-earth element belonging to Sc, Y, or La-Lu, and I is Iodine. The rare-earth iodides are layered and demonstrate either 2H, 1T, or 1T d phase as the ground state in bulk, analogous to transition metal dichalcogenides (TMDCs). The calculated exfoliation energy of monolayers (MLs) is comparable to that of graphene and TMDCs, suggesting possible experimental synthesis. The MLs in the 2H phase exhibit ferromagnetism due to unpaired electrons in d and f orbitals. Throughout the rare-earth series, d bands have valley polarization at K and $\overline{K}$ points in the Brillouin zone in the vicinity of the Fermi level. Large intrinsic valley polarization in the range of 15–143 meV without external stimuli is observed in these Ferrovalley materials, which can be enhanced further by applying an in-plane bi-axial strain. These valleys can selectively be probed and manipulated for information storage and processing, potentially offering superior performance beyond conventional electronics and spintronics. Here we further show that the 2H ferromagnetic phase of RI 2 MLs possesses non-zero Berry curvature and exhibits anomalous valley Hall effect with considerable anomalous Hall conductivity. Our work will incite exploratory synthesis of the predicted Ferrovalley materials and their application in valleytronics and beyond.

2D materials↗

Magnetization dynamics driven by displacement currents across a magnetic tunnel junction

Understanding the high-frequency transport characteristics of magnetic tunnel junctions (MTJs) is crucial for the development of fast-operating spintronics memories and radio frequency devices. Here, we present the study of a frequency-dependent capacitive current effect in Co Fe B / Mg O -based MTJs and its influence on magnetization dynamics using a time-resolved magneto-optical Kerr effect technique. In our device, operating at gigahertz frequencies, we find a large displacement current of the order of mA, which does not break the tunnel barrier of the MTJ. Importantly, this current generates an Oersted field and spin-orbit torque, inducing magnetization dynamics. Our discovery holds promise for building robust MTJ devices operating under high current conditions, also highlighting the significance of capacitive impedance in high-frequency magnetotransport techniques. Published by the American Physical Society 2024

Safeer, C. K. (ORCID:0000000323969730)↗

Role of element-specific damping in ultrafast, helicity-independent, all-optical switching dynamics in amorphous (Gd,Tb)Co thin films

Ultrafast control of the magnetization in ps timescales by fs laser pulses offers an attractive avenue for applications such as fast magnetic devices for logic and memory. However, ultrafast helicity-independent all-optical switching (HI-AOS) of the magnetization has thus far only been observed in Gd-based, ferrimagnetic amorphous (a-) rare earth-transition metal (a-RE-TM) systems, and a comprehensive understanding of the reversal mechanism remains elusive. Here, we report HI-AOS in ferrimagnetic a-Gd 22-x Tb x Co 78 thin films, from x=0 to 18, and elucidate the role of Gd in HI-AOS in a-RE-TM alloys and multilayers. Increasing Tb content results in increasing perpendicular magnetic anisotropy and coercivity, without modifying magnetization density, and slower remagnetization rates and higher critical fluences for switching but still shows picosecond HI-AOS. Simulations of the atomistic spin dynamics based on the two-temperature model reproduce these results qualitatively and predict that the lower damping on the RE sublattice arising from the small spin-orbit coupling of Gd (with L=0) is instrumental for the faster dynamics and lower critical fluences of the Gd-rich alloys. Annealing a-Gd 10 Tb 12 Co 78 leads to slower dynamics which we argue is due to an increase in damping. These simulations strongly indicate that accounting for element-specific damping is crucial in understanding HI-AOS phenomena. The results suggest that engineering the element-specific damping of materials can open up new classes of materials that exhibit low-energy, ultrafast HI-AOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles investigation of near-field energy transfer between localized quantum emitters in solids

We present a predictive and general approach to investigate near-field energy transfer processes between localized defects in semiconductors, which couples first-principles electronic structure calculations and a nonrelativistic quantum electrodynamics description of photons in the weak-coupling regime. The approach is general and can be readily applied to investigate broad classes of defects in solids. We apply our approach to investigate an exemplar point defect in an oxide, the F center in MgO, and we show that the energy transfer from a magnetic source, e.g., a rare-earth impurity, to the vacancy can lead to spin nonconserving long-lived excitations that are dominant processes in the near field, at distances relevant to the design of photonic devices and ultrahigh dense memories. We also define a descriptor for coherent energy transfer to predict geometrical configurations of emitters to enable long-lived excitations, that are useful to design optical memories in semiconductor and insulators. Published by the American Physical Society 2024

Chattaraj, Swarnabha (ORCID:0000000329333581)↗

Neuromorphic Accelerator for Deep Spiking Neural Networks with NVM Crossbar Arrays

In this paper, we present a scalable digital hardware accelerator based on non-volatile memory arrays capable of realizing deep convolutional spiking neural networks (SNNs). Our design studies are conducted using a compact model for spin-transfer torque random access memory (STT-RAM) devices. Large networks are realized by tiling multiple cores which communicate by transmitting spike packets via an on-chip routing network. Compared to an equivalent SRAM based core design, we show that the STT-RAM based design achieves nearly 15X higher GSOPS (Synaptic Operations per Second) per Watt per mm 2 making it a promising platform for realizing systems with significant area and power limitations.

Kulkarni, Shruti↗