Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiple data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas production units (GPUs), pneumatic controllers (PCs) and actuators powered by produced natural gas, and produced water storage tanks. This work details direct methane emission measurements taken at active natural gas wellsites originating from intermittent pneumatic controllers and produced water storage tanks. Efforts to model methane flows originating from these sources are also detailed, and those results are compared to direct measurement. The direct methane emissions measurement campaign collected flow data from two active dry wellsites in the Marcellus shale region. These measurement campaigns captured, in total, several weeks of continuous data from these sites. Data included multiple pneumatic device vent flowrate channels, a single channel monitoring total emissions vented from the produced water storage tanks, and corresponding site weather data. Periodic composition measurements were taken from flows vented from produced water tanks. Computational modeling efforts attempted to mimic a given site’s methane emissions behavior given limited input parameters. Direct measurement data and simulation data yielded, through reduction and analysis, apparent methane emissions factors, statistics on pneumatic device actuation events, important relationships between GPU parameters and pneumatic device actuation events, produced water storage tank vent flows and flow compositions, and parameters most contributing to the magnitude and frequency of these fugitive methane emissions. Measurements, considering data from a 72hr period, produced PC emissions factors from 0.008 to 0.03 SCFH per device with an average device emitting 0.026 SCFH at the first site. The second site produced PC emissions factors spanning from 0.05 to 25.47 SCFH with an average device emitting 1.93 SCFH not including the 25.47 SCFH device, which was assumed to be malfunctioning. Two unique water tank emission measurements were made, 618 g CH4 per hour and 32.6 g CH4 per hour. On a water basis, the water tank emissions factors were 0.66 and 0.042 kg CH4 per bbl of water, respectively.

03 NATURAL GAS↗
NASA NTRS2009

Magnetopause Reconnection Impact Parameters from Multiple Spacecraft Magnetic Field Measurements

We present a novel technique that exploits multiple spacecraft data to determine the impact parameters of the most general form of magnetic reconnection at the magnetopause. The method consists of a superposed epoch of multiple spacecraft magnetometer measurements that yields the instantaneous magnetic spatial gradients near a magnetopause reconnection site. The gradients establish the instantaneous positions of the spacecraft relative to the reconnection site. The analysis is well suited to evaluating the spatial scales of singular field line reconnection, which is characterized by a two-dimensional x-type topology adjacent and perpendicular to a reconnecting singular field line. Application of the method to Cluster data known to lie in the vicinity of a northward IMF reconnection site establishes a field topology consistent with singular field line reconnection and a normal magnetic field component of 20 nT. The corresponding current structure consists of a 130 km sheet possibly embedding a thinner. bifurcated sheet.

Wendel, Deirdre E.↗
DOE OSTI2021

The challenge of blending in large sky surveys

The increasing sensitivity of modern sky surveys allow ever fainter emissions of light to be detected, but it also increases the chances of noticeable overlap between multiple sources of light, a phenomenon called blending. Furthermore, the consequences of blending are expected to be among the leading systematic measurement uncertainties of future surveys, such as the Legacy Survey of Space and Time. This Perspective discusses two main approaches to addressing blending: attempting to separate individual sources and statistically correcting for the presence of blending at the population level. For both approaches, simultaneous access to data of multiple surveys will be critical to construct a joint data set that combines the strengths of each individual survey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Probing Fundamental Mechanisms of Plastic Deformation with High Energy X-rays (Final Progress Report)

Overall, substantial progress was made on developing BCDI techniques in the direction of imaging defects in multi-crystal samples. Section 2.1 describes a new method to reconstruct the 3D atomic displacement field within a grain from multiple coherently resolved diffraction peaks. The key development is the ability to recover a best fit to the grain shape at the same time as the internal displacement (strain) variation with no prior knowledge of the microstructure. This is complemented by the development of a method, Sec. 2.2, to separate out sets of Laue reflections that belong to a single grain (and thus be able to index its orientation) in the commonly encountered situation in which the beam illuminates several grains in a given location. This is essential for enabling collection of coherent diffraction data (at APS 34-ID-C) from neighboring grains. All experiments depend on the quality of samples used. Although good progress has been made with thin film samples, we are working with a broader range of geometries. A new sample design uses a high-Z metal (e.g., Pt) deposited in a sub-micron trench in a low-Z metal (e.g., Al) so that the grain size is prevented from exceeding the current limit for BCDI. We also report in section 3.1 on successfully applying NF-HEDM to a fine-grain Mg sample that would normally be considered out of scope for the method. This represents progress towards being able to map out polycrystalline samples in 3D before performing BCDI on individual grains. We further report in section 3.2 on preliminary NF-HEDM characterization of a sample of UO2 that has sub-micron grains; the data imply the capability of mapping fine-grain polycrystals at 1-ID-E, again for the purposes of BCDI in the bulk. Lastly, our plan is to load grains in polycrystalline samples by inducing thermal stress. We also report the experimental measurements of the Ti- 6Al-4V alloy obtained at the European Synchrotron Radiation Facility (ESRF), which had been indexed and mapped via HEDM at APS in section 9. As discussed below, however, technique development pre-occupied the team throughout the project which meant that we did not make any significant progress towards answering the original hypotheses as stated in the proposal. In summary, we assert that we have made good progress in methods and samples and future work taking advantage of this progress is likely to obtain and analyze BCDI data from multiple adjacent grains in 3D polycrystals. Obtaining such data depends on re-gaining access to the Advanced Photon Source, which is anticipated in late summer or the Fall. In all cases, work has involved close collaboration with faculty, staff, postdocs and students from Brigham Young University (BYU), the Los Alamos National Laboratory and APS beamlines 1-ID and 34-ID.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Efficient Storage-Driven Machine Learning Model for Performance in the Era of Multimodal Scientific Data

Scientific workflows are increasingly relying on machine learning (ML), simulation, and hybrid techniques to predict, understand, and optimize the behavior of complex experiments. High-performance computing has greatly improved researchers’ ability to acquire diverse data modalities in these workflows. Recent studies suggest that the performance of machine learning models can be improved by integrating data from various sources. Unfortunately, these workloads pose unprecedent pressure on the network storage to meet the demands associated with accessing these multimodal data. To mitigate the impact of intensive IO, we propose a solution that utilizes a multi-tier High-Performance Computing (HPC) distributed storage and data processing framework, placing computation where the data resides for better performance. By adopting this project, the scientific community will gain new opportunities to explore multimodal storage-driven possibilities, integrating multiple scientific data sources with advanced streaming frameworks. Additionally, our framework effectively utilizes computing resources and bridges the gaps identified by HPC experts. Our proposed approach tackles scalability and persistence challenges by leveraging native persistency, which has posed difficulties in traditional approaches. Furthermore, we seek to enhance fault-tolerance and load-balance of computations by leveraging real-time streaming in diverse scientific computing environments, thereby propelling advanced scientific computing research into the next generation.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2014

Software Suite to Support In-Flight Characterization of Remote Sensing Systems

A characterization software suite was developed to facilitate NASA's in-flight characterization of commercial remote sensing systems. Characterization of aerial and satellite systems requires knowledge of ground characteristics, or ground truth. This information is typically obtained with instruments taking measurements prior to or during a remote sensing system overpass. Acquired ground-truth data, which can consist of hundreds of measurements with different data formats, must be processed before it can be used in the characterization. Accurate in-flight characterization of remote sensing systems relies on multiple field data acquisitions that are efficiently processed, with minimal error. To address the need for timely, reproducible ground-truth data, a characterization software suite was developed to automate the data processing methods. The characterization software suite is engineering code, requiring some prior knowledge and expertise to run. The suite consists of component scripts for each of the three main in-flight characterization types: radiometric, geometric, and spatial. The component scripts for the radiometric characterization operate primarily by reading the raw data acquired by the field instruments, combining it with other applicable information, and then reducing it to a format that is appropriate for input into MODTRAN (MODerate resolution atmospheric TRANsmission), an Air Force Research Laboratory-developed radiative transport code used to predict at-sensor measurements. The geometric scripts operate by comparing identified target locations from the remote sensing image to known target locations, producing circular error statistics defined by the Federal Geographic Data Committee Standards. The spatial scripts analyze a target edge within the image, and produce estimates of Relative Edge Response and the value of the Modulation Transfer Function at the Nyquist frequency. The software suite enables rapid, efficient, automated processing of ground truth data, which has been used to provide reproducible characterizations on a number of commercial remote sensing systems. Overall, this characterization software suite improves the reliability of ground-truth data processing techniques that are required for remote sensing system in-flight characterizations.

Stanley, Thomas↗
DOE OSTI2023

Accessing the strong interaction between Λ baryons and charged kaons with the femtoscopy technique at the LHC

The interaction between baryons and kaons/antikaons is a crucial ingredient for the strangeness $S$ = 0 and $S$ = -2 sector of the meson–baryon interaction at low energies. In particular, the $Λ\overline{K}$ might help in understanding the origin of states such as the $Ξ$(1620), whose nature and properties are still under debate. Experimental data on $Λ–K$ and $Λ–\overline{K}$ systems are scarce, leading to large uncertainties and tension between the available theoretical predictions constrained by such data. In this Letter we present the measurements of $Λ–K$ + ⊕ $\overline{Λ}–K$ - and $Λ–K$ - ⊕ $\overline{Λ}–K$ + correlations obtained in the high multiplicity triggered data sample in pp collisions at $\sqrt{s}$ = 13 TeV recorded by ALICE at the LHC. The correlation function for both pairs is modeled using the Lednický–Lyuboshits analytical formula and the corresponding scattering parameters are extracted. The $Λ–K$ - ⊕ $\overline{Λ}–K$ + correlations show the presence of several structures at relative momenta k above 200 MeV/c, compatible with the $Ω$ baryon, the $Ξ$(1690), and $Ξ$(1820) resonances decaying into $Λ–K$ - pairs. The low $k^*$ region in the $Λ–K$ - ⊕ $\overline{Λ}–K$ + also exhibits the presence of the $Ξ$(1620) state, expected to strongly couple to the measured pair. The presented data allow to access the $ΛK$ + and $ΛK$ - strong interaction with an unprecedented precision and deliver the first experimental observation of the $Ξ$(1620) decaying into $ΛK$ - .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

PV Fleet Performance Data Initiative Program and Methodology

The US Department of Energy’s PV Fleet Performance Data Initiative has been launched in order to collect and evaluate production data across multiple PV fleet partners. Performance statistics are anonymized, aggregated and shared to represent a snapshot of the US commercial and utility-scale fleet. Production data have been collected from over 1500 systems representing more than 1.3 GWdc capacity. Preliminary analysis indicates median performance loss rates are in line with previous publications of system degradation, on the order of –0.6%/yr to –0.9%/yr (preliminary numbers subject to change). These values are higher than module-only degradation rates which are often used in pro-forma estimates of project performance and economics, potentially exposing owner/operators to increased risk if systems under-perform over time.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2022

Data used in Wainwright, H.M. et al. 2021, “Watershed zonation through hillslope clustering for tractably quantifying above- and belowground watershed heterogeneity and functions”

This data package contains spatial data layers and processing scripts used in Wainwright, H.M. et al. 2021, “Watershed zonation approach for tractably quantifying above-and- belowground watershed heterogeneity and functions”. The purpose of the data and paper is to develop a watershed zonation approach for characterizing watershed organization and function in a tractable manner by applying clustering methods to multiple spatial data layers. The data package contains the geotiff files of spatial data layers, and the processed data values corresponding to the figures in the paper. The Data_description file describe each file in details. The spatial data sets (geotiff) are included in the zip files.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

GEODYN programmers guide, volume 2, part 1

A guide to the GEODYN Program is presented. The program estimates orbit and geodetic parameters. It possesses the capability to estimate that set of orbital elements, station positions, measurement biases, and a set of force model parameters such that the orbital tracking data from multiple arcs of multiple satellites best fit the entire set of estimated parameters. GEODYN consists of 113 different program segments, including the main program, subroutines, functions, and block data routines. All are in G or H level FORTRAN and are currently operational on GSFC's IBM 360/95 and IBM 360/91.

Mullins, N. E.↗
NASA NTRS1991

A consensual neural network

A neural network architecture called a consensual neural network (CNN) is proposed for the classification of data from multiple sources. Its relation to hierarchical and ensemble neural networks is discussed. CNN is based on the statistical consensus theory and uses nonlinearly transformed input data. The input data are transformed several times, and the different transformed data are applied as if they were independent inputs. The independent inputs are classified using stage neural networks and outputs from the stage networks are then weighted and combined to make a decision. Experimental results based on remote-sensing data and geographic data are given.

Benediktsson, J. A.↗
NASA NTRS2004

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

The purpose was to investigate and evaluate the interchange of application- specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. See Engineering Analysis Using a Web-Based Protocol by J.D. Schoeffler and R.W. Claus, NASA TM-2002-211981, October 2002. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

Source record↗
NASA NTRS2005

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

The purpose of grant NCC3-966 was to investigate and evaluate the interchange of application-specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

Source record↗
DOE OSTI2023

Cluster characterization in atom probe tomography: Machine learning using multiple summary functions

In this work, we develop a machine learning-based method to characterize intracluster concentration (ρ c ), background concentration (ρ b ), clustering radius (r̄), and radius dispersity (δ r ) in simulated atom probe tomography data using multiple spatial statistics summary functions to train a Bayesian regularized neural network. Here, we build upon previous work that utilized Ripley’s K-function by incorporating additional features from nearest-neighbor spatial statistics summary functions to better characterize concentration-based metrics. The addition of nearest-neighbor based features allows for highly accurate estimates of ρ c and ρ b , both with 90% of the predictions within 4.0% of the real value; the root-mean-square errors are reduced by 81.5% and 92.8% from predictions using only K-function based features, respectively. Additionally, including these nearest-neighbor based features improves the ability to differentiate between r̄ and δ r .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Usable Data Abstractions for Next-Generation Scientific Workflows

Data- and computationally-intensive scientific research, such as numerical simulations and inversions or the training of large neural networks in machine learning applications, that are well suited for HPC environments also often require expert insight and evaluation throughout the computation which can be greatly facilitated with the use of interactive computing tools, such as those in the Jupyter ecosystem. HPC workflows and interactive workflows are typically treated as orthogonal, however, the next generation of research will require both. The first challenge we face in this project is thus designing the right level of abstractions to allow interactive capabilities in the JupyterLab environment to allow the working scientist to flexibly explore and query their data at multiple levels, with a minimal amount of customization required of the underlying optimized codes. In addition to these questions regarding the high-level representation of data for interactive use in HPC, we tackled two additional issues that are part of the entire lifecycle of research and that become particularly acute in HPC contexts: how to improve the experience of interfacing with the HPC system's scheduling environment for a scientist focused on exploratory questions, and how can that scientist then best share the results of their work with others in a self-contained, reproducible manner.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2001

Spectral Data Assimilation for Merging Satellite Ocean Color Imagery

The Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) project was initiated 'to develop a methodology and operational capability to combine data products from various ocean color missions in a manner that ensures the best possible global coverage and best exploits the complementary missions of the sensors'. While the merging of data from multiple sources has already been implemented for sea surface temperature (SST), altimetry or clouds, this is a new topic in ocean color science. Merging ocean color data has obvious advantage in terms of spatial and temporal coverage of the global ocean but data merging should also result in new, more diverse and improved data products with lower uncertainties. The merging of ocean color satellite data is generally considered at the level of the global gridded products, i.e., NASA Level-3 and, more specifically, for the merging of chlorophyll a concentration data, [Ch1]. This approach limits computational issues and deals with a unique, simple quantity, [Ch1]. However, ocean color data merging can also be conducted at the level of water-leaving radiances, LwN(lamda), using either empirical or semi-analytical algorithms. Although more challenging, this latter approach is potentially extremely powerful as it can achieve good consistency in the final data products and can take advantage of both the specificities and differences of each source of data. The demonstration of the feasibility of such approach is the main objective of our SIMBIOS work. Here, we use a semi-analytical algorithm to merge Rrs (or, equivalently LwN) data from different sources to estimate [Ch1]. The model also allows for the retrieval of other quantities such as the combined absorption of colored detrital particulate and dissolved organic matter at 443 nm, a(sub cdm)(443) and the particulate backscattering, b(sub bp)(443).

Siegel, David A.↗
NASA NTRS2013

A Parameter Estimation Scheme for Multiscale Kalman Smoother (MKS) Algorithm Used in Precipitation Data Fusion

A new approach is presented in this paper to effectively obtain parameter estimations for the Multiscale Kalman Smoother (MKS) algorithm. This new approach has demonstrated promising potentials in deriving better data products based on data of different spatial scales and precisions. Our new approach employs a multi-objective (MO) parameter estimation scheme (called MO scheme hereafter), rather than using the conventional maximum likelihood scheme (called ML scheme) to estimate the MKS parameters. Unlike the ML scheme, the MO scheme is not simply built on strict statistical assumptions related to prediction errors and observation errors, rather, it directly associates the fused data of multiple scales with multiple objective functions in searching best parameter estimations for MKS through optimization. In the MO scheme, objective functions are defined to facilitate consistency among the fused data at multiscales and the input data at their original scales in terms of spatial patterns and magnitudes. The new approach is evaluated through a Monte Carlo experiment and a series of comparison analyses using synthetic precipitation data. Our results show that the MKS fused precipitation performs better using the MO scheme than that using the ML scheme. Particularly, improvements are significant compared to that using the ML scheme for the fused precipitation associated with fine spatial resolutions. This is mainly due to having more criteria and constraints involved in the MO scheme than those included in the ML scheme. The weakness of the original ML scheme that blindly puts more weights onto the data associated with finer resolutions is overcome in our new approach.

multiscale↗
NASA NTRS2016

Scaling Techniques for Combustion Device Random Vibration Predictions

This work presents compares scaling techniques that can be used for prediction of combustion device component random vibration levels with excitation due to the internal combustion dynamics. Acceleration and unsteady dynamic pressure data from multiple component test programs are compared and normalized per the two scaling approaches reviewed. Two scaling technique are reviewed and compared against the collected component test data. The first technique is an existing approach developed by Barrett, and the second technique is an updated approach new to this work. Results from utilizing both techniques are presented and recommendations about future component random vibration prediction approaches are given.

Kenny, R. J.↗