Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Modifying High-Voltage Olivine-Type LiMnPO 4 Cathode via Mg Substitution in High-Orientation Crystal

The LiMnPO4 material with Mg2+ ion substitution in transition metal site is successfully obtained by a facile solvothermal method combining with the subsequent spray drying and pyrolysis. The TEM image shows the controlled crystalline orientation of the primary Mg-doped LiMnPO4 particle, and the three-dimensional (3D) hierarchical micronano structure and the electronic structure of the Mg-doped material are investigated by the reconstructed nanotomography and X-ray absorption spectroscopy, respectively. The uniformity of Mg2+ ions substitution at the secondary particle level is confirmed by the transmission X-ray microscopy combined with X-ray absorption near edge structure. The prepared material exhibits an excellent electrochemical performance with the capacity of 156 mAh/g at the rate of 0.1 C, and good capacity retention of 100% after 400 cycles at the rate of 1 C. The in operando synchrotron X-ray diffraction data indicate that the performance improvement of the Mg-doped materials is attributed to the changed electrochemical reaction mechanism from the typical two-phase reaction for pristine LiMnPO4 material to the two-phase reaction combined with the single-phase (solid-solution) reaction process. These findings provide a new approach and understanding on developing high-energy cathode materials for lithium-ion batteries.

high orientation↗

Preferred Molecular Orientation of Coumarin 343 on TiO 2 Surfaces: Application to Dye-Sensitized Solar Cells

The dye…TiO2 interfacial structure in working electrodes of dye-sensitized solar cells (DSCs) is known to influence its photovoltaic device performance. Despite this, direct and quantitative reports of such structure remain sparse. This case study presents the application of X-ray reflectometry to determine the preferred structural orientation and molecular packing of the organic dye, coumarin 343, adsorbed onto amorphous TiO2. Results show that the dye molecules are, on average, tilted by 61.1° relative to the TiO2 surface, and are separated from each other by 8.2 Å. These findings emulate the molecular packing arrangement of a monolayer of coumarin 343 within its crystal structure. This suggests that the dye adsorbs onto TiO2 in one of its lowest energy configurations, i.e. dye…TiO2 self assembly is driven more by thermodynamic rather than kinetic means. Complementary DSC device tests illustrate that this interfacial structure compromises photovoltaic performance, unless a suitably sized co-adsorbant is interdispersed between the coumarin 343 chromophores on the TiO2 surface.

coumarin 343↗

Effect of Solvent Composition on Non-DLVO Forces and Oriented Attachment of Zinc Oxide Nanoparticles

Oriented attachment (OA) occurs when nanoparticles in solution align their crystallographic axes prior to colliding and subsequently fuse into single crystals. Traditional colloidal theories such as DLVO provide a framework for evaluating OA but fail to capture key particle interactions due to the atomistic details of both the crystal structure and the interfacial solution structure. Using zinc oxide as a model system, we investigated the effect of the solvent on short-ranged and long-ranged particle interactions and the resulting OA mechanism. In situ TEM imaging showed that ZnO nanocrystals in toluene undergo long-range attraction comparable to 1kT at separations of 10 nm and 3kT near particle contact. These observations were rationalized by considering non-DLVO interactions, namely dipole-dipole forces and torques between the polar ZnO nanocrystals. Langevin dynamics simulations showed stronger interactions in toluene compared to methanol solvents, consistent with the experimental results. Concurrently, we performed atomic force microscopy measurements using ZnO-coated probes for the short-ranged interaction. Our data provided valuable insights into another type of non-DLVO interaction, namely the repulsive solvation force. Specifically, the solvation force was stronger in water compared to ethanol and methanol, due to the stronger hydrogen bonding and denser packing of water molecules at the interface. In conclusion, our results highlight the importance of non-DLVO forces in a general framework for understanding and predicting particle aggregation and attachment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Self-Assembly of Monodisperse Graphene Nanoribbons: Access to Submicron Architectures with Long-Range Order and Uniform Orientation

Fabricating organic semiconducting materials into large-scale well-organized architectures is critical for building high performance molecular electronics. While graphene nanoribbons (GNRs) hold enormous promise for various device applications, their assembly into a well-structured monolayer or multilayer architecture poses a substantial challenge. Here we report the preparation of length-defined monodisperse GNRs via the integrated iterative binomial synthesis (IIBS) strategy and their self-assembly into submicron-architectures with long-range order, uniform orientation as well as regular layers. Further, the use of short alkyl side chains benefits forming stable multi-layers through interlocking structures. By changing the length and backbone shapes of these monodisperse GNRs, various three-dimensional assemblies including multilayer stripes, monolayer stripes, and nanowires, can be achieved, leading to different photophysical properties and band gaps. The discovery of these intriguing self-assembly behaviors of length-defined GNRs is expected to open the door for various future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic Insights Into the Oriented Attachment of Tunnel-Based Oxide Nanostructures

Controlled synthesis of nanomaterials is one of the grand challenges facing materials scientists. In particular, how tunnel-based nanomaterials aggregate during synthesis while maintaining their well-aligned tunneled structure is not fully understood. Here, we describe the atomistic mechanism of oriented attachment (OA) during solution synthesis of tunneled α-MnO2 nanowires based on a combination of in situ liquid cell transmission electron microscopy (TEM), aberration-corrected scanning TEM with subangstrom spatial resolution, and first-principles calculations. It is found that primary tunnels (1 × 1 and 2 × 2) attach along their common {110} lateral surfaces to form interfaces corresponding to 2 × 3 tunnels that facilitate their short-range ordering. The OA growth of α-MnO2 nanowires is driven by the stability gained from elimination of {110} surfaces and saturation of Mn atoms at {110}-edges. During this process, extra [MnOx] radicals in solution link the two adjacent {110} surfaces and bond with the unsaturated Mn atoms from both surface edges to produce stable nanowire interfaces. Our results provide insights into the controlled synthesis and design of nanomaterials in which tunneled structures can be tailored for use in catalysis, ion exchange, and energy storage applications.

interface↗

Quantification of thin film crystallographic orientation using X-ray diffraction with an area detector

As thin films become increasingly popular (for solar cells, LEDs, microelectronics, batteries), quantitative morphological information is needed to predict and optimize the film's electronic, optical and mechanical properties. This quantification can be obtained quickly and easily with X-ray diffraction using an area detector and synchrotron radiation in two simple geometries. In this paper, we describe a methodology for constructing complete pole figures for thin films with fiber texture (isotropic in-plane orientation). We demonstrate this technique on semicrystalline polymer films, self-assembled nanoparticle semiconductor films, and randomly-packed metallic nanoparticle films. This method can be immediately implemented to help understand the relationship between film processing and microstructure, enabling the development of better and less expensive electronic and optoelectronic devices.

14 SOLAR ENERGY↗

Process‐Oriented Calibration of a Turbulence Scheme in the DOE's Global Storm‐Resolving Model Using Machine Learning

A process‐oriented calibration framework is developed for the Simplified Higher‐Order Closure (SHOC) turbulence scheme in DOE's Simple Cloud Resolving E3SM Atmospheric Model (SCREAM). This framework leverages machine learning surrogates and observational constraints to efficiently calibrate SHOC adjustable parameters across two convective regimes: clear‐sky dry convective boundary layer and fair‐weather shallow cumulus clouds from ARM observations. We use perturbed‐parameter ensembles of a doubly periodic version of SCREAM to train surrogates and apply Markov Chain Monte Carlo sampling guided by cost functions based on benchmarking large‐eddy simulations and observations to identify optimized parameter sets that perform well in both regimes. The calibrated SHOC parameters substantially improve boundary‐layer turbulence and cloud boundaries, and modeled cloud fraction and radiative effects align better with observations than the default. These results demonstrate that combining multiple process‐specific convective regimes with machine‐learning surrogates can reduce parametric uncertainties and yield a model more faithful to cloud–turbulence interactions.

58 GEOSCIENCES↗

The origin of facet selectivity and alignment in anatase TiO 2 nanoparticles in electrolyte solutions: implications for oriented attachment in metal oxides

Atomic-to-mesoscale simulations were used to reveal the origin of oriented attachment between anatase TiO2 nanoparticles in aqueous HCl solutions. Analysis of the distance and pH dependence of interparticle interactions demonstrates that ion correlation forces are responsible for facet-specific attraction and rotation into lattice co-alignment at long-range. These forces give rise to a metastable solvent separated capture minimum on the disjoining pressure-distance curve, with the barrier to attachment largely due to steric hydration forces from structured intervening solvent.

crystal growth↗

Reduced boron lateral ion channeling in very short p-channel transistors by switching from <110> to <100> channel orientation

The on-current of p-channel transistors fabricated on (100) Si substrate can be easily increased by switching from <110> to <100> channel orientation because of faster hole transport. In this paper, we pointed out that there is also a reduction in the gate-to-source/drain overlap, resulting in an increase in the effective channel length for p-channel transistors. Our experimental observation can be explained by a reduction in boron lateral ion channeling due to this switch.

36 MATERIALS SCIENCE↗

Selective liquid crystal molecule orientation on ion beam irradiated tantalum oxide ultrathin films

We recently achieved the homogeneous alignment of liquid crystal (LC) on amorphous Ta{sub 2}O{sub 5} layers. This study demonstrates that LC layers could be aligned either homogeneously or vertically by increasing the growth temperature of rf magnetron sputtering device and the irradiation time of the DuoPIGatron type Ar ion beam device causing uniform and dense plasma. We attained two LC orientations by observing Ta 4f and O 1s peak shifts with x-ray photoelectron spectroscopy. Moreover, the decreased thickness of layers with high-k dielectric constants helped to decrease driving LC voltages and in turn to achieve low power consumption.

36 MATERIALS SCIENCE↗

Large-scale coherent orientations of quasar polarisation vectors: interpretation in terms of axion-like particles

The observation of redshift-dependent coherent orientations of quasar polarisation vectors over cosmological distances in some regions of the sky is reviewed. Based on a good-quality sample of 355 measured quasars, this observation seems to infer the existence of a new effect acting on light propagation on such huge distances.A solution in terms of nearly massless axion-like particles has been proposed in the literature and its current status is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of growth rate on the epitaxial orientation and crystalline quality of CeO 2 thin films grown on Al 2 O 3 (0001)

Growth rate-induced epitaxial orientations and crystalline quality of CeO 2 thin films grown on Al 2 O 3 (0001) by oxygen plasma-assisted molecular beam epitaxy were studied using in-situ and ex-situ characterization techniques. CeO 2 grows as three-dimensional (3-D) islands and two-dimensional (2-D) layers at growth rates of 1-7 Å/min, and ≥9 Å/min, respectively. The formation of epitaxial CeO 2 (100) and CeO2(111) thin films occurs at growth rates of 1 Å/min and ≥ 9 Å/min, respectively. Glancing incidence x-ray diffraction (GIXRD) measurements have shown that the films grown at intermediate growth rates (2-7 Å/min) consist of polycrystalline CeO 2 along with CeO 2 (100). The thin film grown at 1 Å/min exhibits six in-plane domains, characteristic of well-aligned CeO 2 (100) crystallites. The content of the poorly-aligned CeO 2 (100) crystallites increases with increasing growth rate from 2 Å/min to 7 Å/min, and three out of six in-plane domains gradually decrease and eventually disappear, as confirmed by XRD pole figures. At growth rates ≥9 Å/min, CeO 2 (111) film with single in-plane domain was identified. The formation of CeO 2 (100) 3-D islands at growth rates of 1-7 Å/min is a kinetically driven process unlike at growth rates ≥9 Å/min which result in an energetically and thermodynamically more stable CeO 2 (111) surface.

36 MATERIALS SCIENCE↗

Magnetic and transport properties of Mn{sub 2}CoAl oriented films

The structure, magnetic, and transport properties of thin films of the Heusler ferrimagnet Mn{sub 2}CoAl have been investigated for properties related to spin gapless semiconductors. Oriented films were grown by molecular beam epitaxy on GaAs substrates and the structure was found to transform from tetragonal to cubic for increasing annealing temperature. The anomalous Hall resistivity is found to be proportional to the square of the longitudinal resistivity and magnetization expected for a topological Berry curvature origin. A delicate balance of the spin-polarized carrier type when coupled with voltage gate-tuning could significantly impact advanced electronic devices.

36 MATERIALS SCIENCE↗

Effect of injected spins with different polarized orientations on the superconductivity of La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} thin films

The influence of spin-polarized quasi-particle injection on the superconductivity of epitaxial La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} composite thin films is systematically investigated. Different electrode configurations on the same specimen are designed to study the role of spin injection. It is found that the upper critical field and flux pinning potential are reduced by the spin injection, especially for the field parallel to ab-plane. The manipulation of superconductivity by the spin polarization orientations of injected quasi-particles possibly originates from the different suppressions on the superconducting pairing strength, which is considered to be related to the local antiferromagnetic spin fluctuations in La{sub 1.85}Sr{sub 0.15}CuO{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Position- and orientation-controlled polarized light interaction of individual indium tin oxide nanorods

We have systematically investigated the position, orientation, and polarization angle dependence of scattered light from well-characterized, indium tin oxide nanorods (ITO NRs) upon illumination with monochromatic light. Scattering signals from individual ITO NRs of horizontal and vertical configurations are probed quantitatively by examining signal response with respect to the analyzer angle and position along the length of the NR. Our efforts can be highly beneficial in providing fundamental understanding for the light interaction behavior of ITO NRs. Our results can provide valuable bases for comprehending optical emission from individual NRs, with their ever-growing applications in optoelectronics, photonics, and biosensing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band to band tunneling in III-V semiconductors: Implications of complex band structure, strain, orientation, and off-zone center contribution

In this paper, we use a tight binding Hamiltonian with spin orbit coupling to study the real and complex band structures of relaxed and strained GaAs. A simple d orbital on-site energy shift coupled with appropriate scaling of the off-diagonal terms is found to correctly reproduce the band-edge shifts with strain. Four different 〈100〉 strain combinations, namely, uniaxial compressive, uniaxial tensile, biaxial compressive, and biaxial tensile strain are studied, revealing rich valence band structure and strong relative orientation dependent tunneling. It is found that complex bands are unable to provide unambiguous tunneling paths away from the Brillouin zone center. Tunneling current density distribution over the Brillouin zone is computed using non-equilibrium Green's function approach elucidating a physical picture of band to band tunneling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High carrier mobility in orientation-controlled large-grain (≥50 μm) Ge directly formed on flexible plastic by nucleation-controlled gold-induced-crystallization

High-carrier-mobility semiconductors on flexible-plastic are essential to realize flexible electronics. For this purpose, electrical properties of orientation-controlled large-grain Ge crystals on flexible-plastic directly formed by nucleation-controlled gold-induced-crystallization (GIC) are examined, and compared with those obtained by aluminum-induced-crystallization (AIC). The Ge crystals show p-type conductions. Here, hole concentrations are 2.2 × 10{sup 17} and 5.8 × 10{sup 20} cm{sup −3} for GIC-Ge and AIC-Ge, respectively, which are explained on the basis of the solubility of Au and Al in Ge. Thanks to the low hole concentration, GIC-Ge shows high hole mobility (160 cm{sup 2} V{sup −1} s{sup −1}) compared with AIC-Ge (37 cm{sup 2} V{sup −1} s{sup −1}). These demonstrate significant advantage of GIC to realize high-performance flexible-electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗