Search NASA⌕ Search

SEARCH · Search NASA

Results for “Order fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

On the cubic zero-order solution of electromagnetic waves. I. Periodic slabs with lossy plasmas

Electromagnetic waves are considered for periodic structures consisting of lossy plasmonic components and dielectric host media. For the plasmonic components, not only low-loss metals but also high-loss gas plasmas are taken into consideration. For small filling fractions of the plasmonic components, the intercell interactions are kept to a minimum. In this way, the zero-order solution to the dispersion relation is solved by focusing on its cubic nonlinearity in frequency. Analysis shows that there are two types of solutions: propagating waves and stationary states, depending on the magnitudes of the temporal attenuation rates. Depending on the relative strengths of the material loss of the plasmonic component and its filling fraction, several key critical parameters for the transitions between these two solution types are thus identified. In the following companion paper of Paper II, the cubic nonlinearities in frequency of the dispersion relations stem from different origins. Notwithstanding, they lead to strikingly similar features such as the transitions in wave types and Hopf bifurcations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of composition and crystallographic ordering on the ferromagnetic transition in Ni–Co–Mn–In magnetic shape memory alloys

In the present study, the effects of composition and the level of crystallographic ordering were studied in Ni 45 Co 5 Mn 50-X In X magnetic shape memory alloys with X = 13.55, 13.71 and 13.92, in order to reveal the relationship between the Curie temperature (T C ) of the austenite phase and the degree of L2 1 ordering. Various samples were prepared using secondary heat treatments at different temperatures below the order-disorder transition temperature and for different durations, after solution heat treatment, in order to control the degree of ordering. T C s were determined using calorimetric and magnetometry measurements. The relationship between the T C and the degree of order was used to predict the evolution of the order during selected heat treatments. It was shown that the T C of austenite exhibits a monotonous non-linear dependence on the fraction of the L2 1 phase. This relationship was corroborated via ab initio numerical calculations within a mean field approximation. Dependence of the crystallographic order parameter on temperature and duration of secondary heat treatments showed that ordering kinetics is fast, the total degree of order depends only on the annealing temperature and cooling rate for long enough treatments, and maximum achievable degree of order is limited by the low thermal energy available for atomic diffusion at low temperatures. Lastly, small changes in composition were observed to have a significant impact on martensitic transformation temperatures, and a significant but smaller effect on the ferromagnetic transition in these systems.

36 MATERIALS SCIENCE↗

Fractional excitations in foliated fracton phases

Fractional excitations in fracton models exhibit novel features not present in conventional topological phases: their mobility is constrained, there are an infinitude of types, and they bear an exotic sense of ‘braiding’. Hence, they require a new framework for proper characterization. Based on our definition of foliated fracton phases in which equivalence between models includes the possibility of adding layers of gapped 2D states, we propose to characterize fractional excitations in these phases up to the addition of quasiparticles with 2D mobility. That is, two quasiparticles differing by a set of quasiparticles that move along 2D planes are considered to be equivalent; likewise, ‘braiding’ statistics are measured in a way that is insensitive to the attachment of 2D quasiparticles. The fractional excitation types and statistics defined in this way provide a universal characterization of the underlying foliated fracton order which can subsequently be used to establish phase relations. We demonstrate as an example the equivalence between the X-cube model and the semionic X-cube model both in terms of fractional excitations and through an exact mapping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Unified SHOC-MF Boundary Layer Parameterization in the NASA Goddard Earth Observing System Model

We present results from a novel extension of the boundary layer parameterization in the NASA Goddard Earth Observing System (GEOS) model. An Eddy Diffusivity-Mass Flux (EDMF) multi-plume updraft scheme was previously implemented in GEOS. Here we replace the K-profile eddy diffusivity scheme of Lock et. al. (2000) with the Simplified Higher Order Closure (SHOC; Bogenschutz and Krueger, 2013). The scheme prognoses turbulent kinetic energy, and derives buoyancy flux, cloud fraction and condensate from a trivariate double-gaussian joint PDF. The original SHOC scheme is modified in two significant respects: (i) contributions from the EDMF updrafts are included in estimates of all higher order moments used to determine the PDF; and (ii) the second and third moments of total water are made prognostic variables, with source terms associated with EDMF updrafts. The predicted higher order moments as well as updraft and environmental properties are compared with large eddy simulations in several case studies. Results indicate that many higher order moments are underestimated when the mass flux contribution is neglected.

Nathan Arnold↗

A Unified SHOC-MF Boundary Layer Parameterization in the NASA Goddard Earth Observing System Model

We present results from a novel extension of the boundary layer parameterization in the NASA Goddard Earth Observing System (GEOS) model. An Eddy Diffusivity-Mass Flux (EDMF) multi-plume updraft scheme was previously implemented in GEOS. Here we replace the K-profile eddy diffusivity scheme of Lock et. al. (2000) with the Simplified Higher Order Closure (SHOC; Bogenschutz and Krueger, 2013). The scheme prognoses turbulent kinetic energy, and derives buoyancy flux, cloud fraction and condensate from a trivariate double-gaussian joint PDF. The original SHOC scheme is modified in two significant respects: (i) contributions from the EDMF updrafts are included in estimates of all higher order moments used to determine the PDF; and (ii) the second and third moments of total water are made prognostic variables, with source terms associated with EDMF updrafts. The predicted higher order moments as well as updraft and environmental properties are compared with large eddy simulations in several case studies. Results indicate that many higher order moments are underestimated when the mass flux contribution is neglected.

Nathan Arnold↗

Develop a new integrated macro→micro←nano (MMN) multiscale modeling framework to optimize high strength aluminum alloys and processes for vehicle light-weighting​

Bending tests provide a means to study plane strain fracture performance of 6000 series aluminum alloys. Metrics from bending tests have been correlated with self-pierce riveting (SPR) performance of a high strength AA6111 automotive aluminum alloy in previous works. Using the ORNL HPC resources, this project developed an innovative macro→micro←nano (MMN) multiscale microstructure-based finite element (FE) code to further understanding of the relationship between microstructure and fracture properties of high-strength 6000-series alloys. This work started with microstructural characterization in both mesoscale and nanoscale and bending performance characterization of AA6111 HS2-T6 alloy at Ford, the MMN framework was applied to this alloy to simulate 3-point VDA bending. From the results of the macro-modeling of 3-point VDA bending, the critical region of fracture was identified, and the region geometry was used to construct the micro-model. The fracture criterion of micron-scale precipitates and aluminum matrix which contains submicron and nano particles (AL-SMP-NP) in the micro-model was calibrated and validated by comparing simulated and measured bending results. With the AL-SMP-NP fracture strain obtained, the fracture strain of Al-matrix containing nano particles (ALNP) will similarly be determined by a submicron scale-model using an edge-constrained FE modeling approach developed by Hu et al. With the ALNP fracture strain obtained, the fracture strain of Al-matrix containing no particles will similarly be determined by a nano scale-model using an edge-constrained FE modeling approach. After the MMN framework is built and fracture criterion calibrated, nano-model FE simulations with virtual microstructures was performed to obtain a reduced order model (ROM) of the fracture criterion of the ALNP as a function of volume fraction, size, and distribution of the nanoparticle. This nano→submicron→micro modeling part allows exploration of the influence of different material nanostructures from different process conditions on the bending properties within the multiscale bending simulation framework and the ROM of material bendability as a function of nanoparticle size and shape was established. This obtained reduced order model (ROM) could help guide the design and selection of materials to improve existing SPR process models that could replace trial-and-error rivet/die selection and help to design new rivet/die combinations capable of robustly joining new higher strength 6000 5 series alloys in automotive body structures. This would enable lightweighting of Ford vehicles leading to greater fuel efficiency and reduce manufacturing time and energy.

36 MATERIALS SCIENCE↗

Probing long-range ordering in nickel-base alloys with proton irradiation

In this paper, twelve commercial-grade austenitic alloys based on the Ni-Cr-Mo-Fe quaternary system were irradiated using 2 MeV protons at 360 °C to a damage level of 2.5 displacements per atom (dpa). Long-range ordered (Pt 2 Mo-type) precipitation under proton irradiation was observed, for the first time, in alloys C22, 625, 625P, 625D, 725, and 690. No relevant short-range ordering was observed. These irradiation-enhanced long-range ordered precipitates are coherent with the matrix despite their irregular shape. Of the potential influences on long-range ordering (Ni:Cr, and Ni:(Cr + Mo) ratios, Mo, and iron concentration), Fe content was the strongest by far. The volume fraction of LRO decreases with increasing Fe content by virtue of its role as a stabilizer of the disordered FCC phase, thus reducing the energy savings from ordering. The observed effects of Fe on long-range ordering show qualitative agreement with predictions from thermodynamic modeling. Although solid state diffusion kinetics dominate long-range ordering under purely thermal conditions, ordering under irradiation here (~ 2.5dpa) is controlled by the thermodynamic driving force. Finally, proton irradiation thus offers a unique approach for studying the low temperature phase transformation in a thermodynamically favored, but kinetically constrained condition.

36 MATERIALS SCIENCE↗

DEM Modeling and Validation of Pebble Bed Packing Using Chrono::GPU

Accurate prediction of pebble packing structure is important for pebble bed reactors because the spatial distribution of void fraction directly affects coolant flow, pressure drop, heat transfer, and neutronic behavior. However, experimentally validated DEM studies that directly evaluate local void-fraction structure in reactor-relevant pebble beds remain limited. In this work, the pebble bed experiment conducted at Missouri University of Science and Technology is simulated using the graphics processing unit (GPU)-based discrete element method (DEM) code Chrono::GPU. The study focuses on evaluating the ability of Chrono::GPU to reproduce the packing arrangement and void-fraction distribution of a randomly packed spherical pebble bed. The DEM results are first verified against established radial void-fraction correlations, including the Mueller and Vortmeyer-Schuster models, to assess the predicted bulk porosity, near-wall behavior, and oscillatory packing structure. The simulation is then verified against reference DEM data and validated against gamma-ray computed tomography (CT) experimental data at three axial locations. The Chrono::GPU results reproduce the main features of the experimental packing, including the high void fraction near the wall, the first near-wall trough, and the damped oscillatory radial profile caused by wall-induced ordering. Quantitative comparison with DEM data and the CT-based radial profiles shows good agreement, with mean absolute errors on the order of 0.07 and root-mean-square errors below 0.09 for the averaged profiles. These results demonstrate that Chrono::GPU can accurately capture the void-fraction structure of spherical pebble beds and provides a reliable DEM framework for future pebble bed reactor packing, recycling, and thermal-hydraulic studies.

97 - MATHEMATICS AND COMPUTING↗

Future precipitation increase constrained by climatological pattern of cloud effect

The fractional increase in global mean precipitation (?P ¯/P ¯) is a first-order measure of the hydrological cycle intensification under anthropogenic warming. However, ?P ¯/P ¯ varies by a factor of more than three among model projections, hindering credible assessments of the associated climate impacts. The uncertainty in ?P ¯/P ¯ stems from uncertainty in both hydrological sensitivity (global mean precipitation increase per unit warming) and climate sensitivity (global mean temperature increase per forcing). Here, by investigating hydrological and climate sensitivities in a unified surface-energy-balance perspective, we find that both sensitivities are significantly correlated with surface shortwave cloud feedback, which is further linked to the climatological pattern of cloud shortwave effect. The observed pattern of cloud effect thus constrains both sensitivities and consequently constrains ?P ¯/P ¯. The 5%-95% uncertainty range of ?P ¯/P ¯ from 1979-2005 to 2080-2100 under the high-emission (moderate-emission) scenario is constrained from 6.34±3.53% (4.19±2.28%) in the raw ensemble-model projection to 7.03±2.59% (4.63±1.71%). The constraint thus suggests a higher most-likely ?P ¯/P ¯ and reduces the uncertainty by ~25%, providing valuable information for impact assessments.

Zhou, Wenyu↗

Probabilities of octahedral clusters depending on long-range order parameters and composition in nonstoichiometric titanium monoxide TiO{sub y}

A method for calculating the probabilities of cluster configurations in ordered superstructures of strongly nonstoichiometric compounds depending on the composition and the order parameter is described using the Ti{sub 5}O{sub 5} superstructure of nonstoichiometric titanium monoxide TiO{sub y}. Analytic expressions are derived for the dependences of the probabilities of the main cluster configurations in the Ti{sub 5}O{sub 5} superstructure on the fraction of atomic positions in the titanium and oxygen sublattices and on the long-range order parameter. The probabilities of configurations are calculated for various long-range order parameters taking into account experimental data on the concentration of structural vacancies in the titanium and oxygen sublattices. The dependences of the probabilities of cluster configurations on the short-range order parameter are established from the relations between the superstructure long-range and short-range order parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upgrading Fast Pyrolysis Liquids

The liquid formed by the fast pyrolysis (FP) of biomass is commonly termed bio-oil. Biomass is converted to bio-oil through FP at 400-550°C typically at 1 atm. During FP, the biomass is held at temperature for a residence time on the order of 1-2 seconds. FP is beneficial from the standpoint that a large portion of the total mass and carbon contained in the biomass is converted and retained in the liquid bio-oil fraction. However, bio-oil is acidic, viscous, and thermally unstable. Bio-oil must be upgraded in order to be considered as a liquid transportation fuel or separated and further treated to produce value-added chemicals. Bio-oil is generally regarded as difficult to upgrade due to its thermal instability and chemical complexity which is derived in part from the incorporation of highly reactive species such as aldehydes and terminal olefins as well as the presence of sugars and anhydrosugar species which undergo secondary polymerization reactions when heated. Upgrading strategies considered in this chapter include methods to stabilize and deoxygenate bio-oil through low temperature hydroprocessing to stabilize bio-oil followed by higher temperature “deep hydrotreating” to remove the majority of oxygen present; converting bio-oil catalytically (often with zeolites such as HZSM-5) prior to condensation with catalysts inside the FP reactor or in a separate fixed or fluidized bed after the FP reactor; catalytic cracking with acid catalysts such as zeolites after condensation; or through physical or chemical separations to improve bio-oil stability, extract valuable chemicals, or produce H¬2. Bio-oil upgrading by co-processing with refinery streams such as vacuum gas oil in a fluid catalytic cracking (FCC) unit in a refinery has also been investigated. Numerous excellent reviews, perspectives and other chapters have been published in the preceding 7 years.[1-10] Reviews specific to individual sections within this chapter are at the beginning of the individual sections. This chapter is intended as an update to the original article authored by Prof. Anthony V. Bridgwater, Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, First Edition, Edited by Robert C. Brown, © 2011 John Wiley & Sons, Ltd. We gratefully acknowledge the original contribution by Prof. Bridgwater and have kept much of his original discussions intact with updated references. The scope of this updated chapter includes references published since about 2010. In the interest of space many of the original references included in the original version were not included. Thus, Prof. Bridgwater’s original chapter should be viewed as a companion to this updated chapter to provide a holistic set of references to the numerous bio-oil upgrading processes discussed herein.

Albrecht, Karl O.↗

Collaborative Research: Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

Understanding the dynamics of polymers of different topologies is an important field of study and one of the most important unanswered questions in this field is "how do circular polymers move," particularly in the melt state. New information suggests that molecular topology, specifically circular rings, impacts the response of materials in nanometer- scale confinement. The work performed here tackles these subjects through a collaboration in which specialists in polymer synthesis, polymer rheology and scattering methods, and in the physics of nanoconfinement work together to investigate the thermophysical behavior of circular macromolecules. The project goals are to use a novel synthesis method of "green" oxidative polymerization to produce high purity macrocycles and to investigate their linear viscoelastic behavior in order to fully characterize the dynamics of circular macromolecules to sizes that correspond to linear molecule entanglement densities higher than previously obtainable with synthetic polymers. Chemical chain end characterization and critical edge fractionation coupled with direct visualization of the prepared polymers through the use of polymer amplification methods are proposed in order to quantify the numbers of circular and linear molecules in each sample. The study of the linear viscoelastic response of blends of linear and circular molecules is also to be undertaken in the project. Nonlinear viscoelastic measurements, including extensional viscosity, are to be made. Strong differences in behavior between linear chains and circular ones also provides an important opportunity for new technology to break the "magic triangle" for tires: it is believed that improving one of the three key attributes - traction, wear, rolling resistance - necessarily sacrifices at least one of the others. Rubber made from cyclic polymers has the potential to break out of this triangle by reducing the so-called Payne effect in reinforced rubbers because circular macromolecules are less sensitive to nanoconfinement than their linear counterparts. The work has as one objective to characterize the impact of nanoconfinement on the behavior of large circular macromolecules. In addition, the dynamics of carbon black filled circular macromolecules are to be studied to test the hypothesis that the resulting rubbery materials will exhibit a reduced Payne effect.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Perils of Partition: Difficulties in Retrieving Magma Compositions from Chemically Equilibrated Basaltic Meteorites

The chemical compositions of magmas can be derived from the compositions of their equilibrium minerals through mineral/magma partition coefficients. This method cannot be applied safely to basaltic rocks, either solidified lavas or cumulates, which have chemically equilibrated or partially equilibrated at subsolidus temperatures, i.e., in the absence of magma. Applying mineral/ melt partition coefficients to mineral compositions from such rocks will typically yield 'magma compositions' that are strongly fractionated and unreasonably enriched in incompatible elements (e.g., REE's). In the absence of magma, incompatible elements must go somewhere; they are forced into minerals (e.g., pyroxenes, plagioclase) at abundance levels far beyond those established during normal mineral/magma equilibria. Further, using mineral/magma partition coefficients with such rocks may suggest that different minerals equilibrated with different magmas, and the fractionation sequence of those melts (i.e., enrichment in incompatible elements) may not be consistent with independent constraints on the order of crystallization. Subsolidus equilibration is a reasonable cause for incompatible- element-enriched minerals in some eucrites, diogenites, and martian meteorites and offers a simple alternative to petrogenetic schemes involving highly fractionated magmas or magma infiltration metasomatism.

Treiman, Allan H.↗

Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements

In this report the quantitative determination of the carbon hybridization is critical for establishing processing-structure-properties relationships for carbon-based materials, including amorphous carbon coatings. While several techniques have been employed to characterize the amount of sp 2 and sp 3 carbon in these materials, direct comparisons between analytical results are limited. Here, we compare near edge X-ray absorption fine structure (NEXAFS) spectra of a silicon- and oxygen-containing hydrogenated amorphous carbon (a-C:H:Si:O) coating acquired in synchrotron-based scanning transmission X-ray microscopy (STXM) mode with electron energy loss spectra (EELS) obtained from the same a-C:H:Si:O lamella. While the fractions of sp 2 carbon computed from STXM and EELS spectra are in close agreement, the comparison of NEXAFS spectra acquired in STXM mode with NEXAFS spectra collected in partial electron yield mode on a flat a-C:H:Si:O surface indicated that the destructive preparation of thin lamellae for STXM analyses induces variations in the structure of a-C:H:Si:O, namely the breakage of carbon-silicon and carbon-hydrogen bonds, a change in ordering of sp 2 -bonded carbon, and an increase in the sp 2 carbon fraction. These findings can help scientists in the careful interpretation of spectroscopic results obtained from the analysis of samples made of metastable materials after the destructive preparation of specimens for analytical purposes.

36 MATERIALS SCIENCE↗

Incorporating Endmember Variability into Spectral Mixture Analysis Through Endmember Bundles

Variation in canopy structure and biochemistry induces a concomitant variation in the top-of-canopy spectral reflectance of a vegetation type. Hence, the use of a single endmember spectrum to track the fractional abundance of a given vegetation cover in a hyperspectral image may result in fractions with considerable error. One solution to the problem of endmember variability is to increase the number of endmembers used in a spectral mixture analysis of the image. For example, there could be several tree endmembers in the analysis because of differences in leaf area index (LAI) and multiple scatterings between leaves and stems. However, it is often difficult in terms of computer or human interaction time to select more than six or seven endmembers and any non-removable noise, as well as the number of uncorrelated bands in the image, limits the number of endmembers that can be discriminated. Moreover, as endmembers proliferate, their interpretation becomes increasingly difficult and often applications simply need the aerial fractions of a few land cover components which comprise most of the scene. In order to incorporate endmember variability into spectral mixture analysis, we propose representing a landscape component type not with one endmember spectrum but with a set or bundle of spectra, each of which is feasible as the spectrum of an instance of the component (e.g., in the case of a tree component, each spectrum could reasonably be the spectral reflectance of a tree canopy). These endmember bundles can be used with nonlinear optimization algorithms to find upper and lower bounds on endmember fractions. This approach to endmember variability naturally evolved from previous work in deriving endmembers from the data itself by fitting a triangle, tetrahedron or, more generally, a simplex to the data cloud reduced in dimension by a principal component analysis. Conceptually, endmember variability could make it difficult to find a simplex that both surrounds the data cloud and has vertices that are realistic endmember spectra with reflectances between 0 and 1. In this paper, we create endmember bundles and bounding fraction images for an AVIRIS subscene simulated with a plant canopy radiative transfer model. The simulated subscene is spatially patterned after a subscene from the AVIRIS image acquired August, 1993 over La Copita, Texas. In addition, for comparison, we performed a traditional unmixing with image endmembers.

Bateson, C. Ann↗

Final Technical Report for "High Energy Physics at The University of Iowa"

Particle Physics explores the very fundamental building blocks of our universe: the nature of forces, of space and time. By exploring very energetic collisions of sub-nuclear particles with sophisticated detectors at the colliding beam accelerators (as well as others), experimental particle physicists have established the current theory known as the Standard Model (SM), one of the several theoretical postulates to explain our everyday world. It explains all phenomena known up to a very small fraction of a second after the Big Bang to a high precision; the Higgs boson, discovered recently, was the last of the particle predicted by the SM. However, many other phenomena, like existence of dark energy, dark matter, absence of anti-matter, the parameters in the SM, neutrino masses etc. are not explained by the SM. So, in order to find out what lies beyond the SM, i.e., what conditions at the earliest fractions of the first second of the universe gave rise to the SM, we constructed the Large Hadron Collider (LHC) at CERN after the Tevatron collider at Fermi National Accelerator Laboratory. Each of these projects helped us push the boundary further with new insights as we explore a yet higher energy regime. The experiments are extremely complex, and as we push the boundaries of our existing knowledge, it also requires pushing the boundaries of our technical knowhow. So, not only do we pursue humankind’s most basic intellectual pursuit of knowledge, we help develop technology that benefits today’s highly technical society. Our trained Ph.D. students become experts at fast computing, manipulation of large data volumes and databases, developing cloud computing, fast electronics, advanced detector developments, and complex interfaces in several of these areas. Many of the Particle physics Ph.D.s build their careers at various technology and computing facilities, even financial institutions use some of their skills of simulation and statistical prowess. Additionally, last but not least, today’s discoveries make for tomorrow’s practical uses of an improved life style, case in point, internet technology, fiber optics, and many such things. At The University of Iowa we are involved in the LHC experiments, ATLAS and CMS, building equipment, with calibration and maintenance, supporting the infrastructure in hardware, software and analysis as well as participating in various aspects of data analyses. Our theory group works on fundamentals of field theories and on exploration of non-accelerator high energy neutrinos and possible dark matter searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for the Xi(2220) and Study of the X(3872) at BaBar

The BABAR Collaboration performed a search for x (2220) production in the initial-state radiation process e{sup +}e{sup -} {yields} {gamma} J/{Psi}, J/{Psi} {yields} {gamma}K{sup +}K{sup -} or J/{Psi} {yields} {gamma}K{sub S}{sup 0}K{sub S}{sup 0}. No evidence for the {xi} (2220) resonance has been found. The 90% confidence level upper limits on the product of branching fractions are sensitive to the spin and helicity hypotheses. These upper limits are of the order 10{sup -5}, below the values reported in previous experiments. Also at BABAR, the decays B {yields} J/{Psi} {pi}{sup +}{pi}{sup -}{pi}{sup 0}K are studied to search for the decay X(3872) {yields} J/{Psi}{gamma}. This search yields a four standard deviation evidence for X(3872) {yields} J/{Psi}{omega}, with product branching fractions of {Beta}(B{sup +} {yields} X(3872)K{sup +}) x {Beta}(X(3872) {yields} J/{Psi}{omega}) = [0.6 {+-} 0.2(stat) {+-} 0.1(syst)] x 10{sup -5}, and {Beta}(B{sup 0} {yields} X(3872)K{sup 0}) x {Beta}(X(3872) {yields} J/y{Psi}) = [0.6 {+-} 0.3(stat) {+-} 0.1(syst)] x 10{sup -5}. A detailed study of the {pi}{sup +}{pi}{sup -}{pi}{sup 0} mass distribution from X(3872) decay favors a negative-parity assignment but does not rule out the positive-parity hypothesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗