Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Multispectral scanner optical system

An optical system for use in a multispectral scanner of the type used in video imaging devices is disclosed. Electromagnetic radiation reflected by a rotating scan mirror is focused by a concave primary telescope mirror and collimated by a second concave mirror. The collimated beam is split by a dichroic filter which transmits radiant energy in the infrared spectrum and reflects visible and near infrared energy. The long wavelength beam is filtered and focused on an infrared detector positioned in a cryogenic environment. The short wavelength beam is dispersed by a pair of prisms, then projected on an array of detectors also mounted in a cryogenic environment and oriented at an angle relative to the optical path of the dispersed short wavelength beam.

Stokes, R. C.↗

Single-mode laser studies: Design and performance of a fixed-wave length source and coupling of lasers to thin-film optical waveguides

A module developed for the generation of a stable single wavelength to be used for a fiber optic multiplexing scheme is described. The laser is driven with RZ pulses, and the temperature is stabilized thermoelectrically. The unit is capable of maintaining a fixed wavelength within about 6 A as the pulse duty cycle is changed between 0 and 100 percent. This is considered the most severe case, and much tighter tolerances are obtainable for constant input power coding schemes. Using a constricted double heterostructure laser, a wavelength shift of 0.083 A mA is obtained due to laser self-heating by a dc driving current. The thermoelectric unit is capable of maintaining a constant laser heat-sink temperature within 0.02 C. In addition, miniature lenses and couplers are described which allow efficient coupling of single wavelength modes of junction lasers to thin film optical waveguides. The design of the miniature cylinder lenses and the prism coupling techniques allow 2 mW of single wavelength mode junction laser light to b coupled into thin film waveguides using compact assemblies. Selective grating couplers are also studied.

Ladany, I.↗

C IV resonance line profiles in O stars

Graphs of normalized fluxes derived from objective-prism spectra (from the S-019 experiment on Skylab), and C IV profiles are presented. The C IV resonance profile, when studied with respect to bolometric magnitude and effective temperature, reveals mass loss conditions without requiring precise mass loss rates. There is a clear trend in the C IV feature toward more fully developed P Cygni profiles at higher luminosities, and a significant velocity shift in the C IV absorption down to bolometric magnitude approximately equal to -7.7.

Parsons, S. B.↗

Faint-object spectrograph for Space Telescope

The paper presents the Faint Object Spectrograph (FOS) for the Space Telescope to provide a digitized spectra of faint astronomical objects over the 115 to 700 nm wavelength range at resolving powers of 1000 and 100. A variety of concave gratings and prisms is employed to form nearly stigmatic spectra on one of the two Digicon photon counting detectors which are optimized for two different but overlapping ranges. The scientific goals associated with quasars, active galaxies, and objects within our solar system are discussed, and the FOS optical design features, including detectors, electronics, signal processing, power supplies, and data handling are examined. The FOS structural system, mechanism, and controls are described, along with the predicted performance capabilities in the spectral and spectropolarimetry modes. Finally, system performance parameters, including spatial resolution, time resolution, noise, and efficiency are discussed.

Harms, r. J.↗

Space telescope astrometry

A description of instruments used for astrometric observations are examined with special emphasis on the Fine Guidance Systems of the space telescope. The telescope consists of a 2.4 meter diameter primary and a secondary figured to the Ritchey-Chretien design that yields a f/24 focal plane. The function of the FGS is to keep the total guidance jitter within the ST requirement of + or - 0.0007 rms, and to maximize the probability of finding suitable guide stars with the available 210 arcmin. Attention is given to the focal plane arrangement and to the ray paths and output images from the Koester's prisms. Some projected scientific uses of the space telescope are given as well as beneficial areas of close cooperation between the space telescope and the ESA.

Van Altena, W.↗

Twenty southern peculiar emission-line stars

Observational data for 20 southern stars having emission-line spectra that suggest a significant degree of mass ejection are given in order to present an atlas of their spectra and to give a quantitative description of their appearance during the 1961-62 epoch. Most of the stars are P Cygni stars; others include nova-like, peculiar Be, and symbiotic stars, as well as stellar planetary nebulae and emission-line binaries, all of whose spectra were obtained with the Newtonian two-prism Zeiss Spectrograph and the 74-inch reflector at Mount Stromlo Observatory. It is noted that among the P Cygni stars, there is a strong correlation between the a-e expansion velocity and the strength of Balmer emission, while in both the P Cygni and the Bep stars, there is positive dependence of Fe II and negative dependence of (Fe II) emission strengths on Balmer emission strength.

Carlson, E. D.↗

A study of the Rima Sirsalis lunar magnetic anomaly

The source of the lunar magnetic anomaly associated with the Rima Sirsalis linear rille has been modelled using the vector field intensities due to arbitrary uniform magnetization in a rectangular prism. It is shown that in order to match the Apollo 16 subsatellite data, the lunar surface near the rille must have a vertical magnetization of 6,000-9,000 G if the anomaly is due to flux leakage from a gap in the crust with the dimensions of the rille. An alternative explanation is that Rima Sirsalis and its surroundings are the site of a vertical magnetization contrast of 100,000-10,000 G which is at least as wide as the rille and extends to a depth of tens of kilometers in the crust. A wider magnetic source reduces the required magnetization (or depth) proportionately, since to first order the field at high altitude is proportional to the magnetic dipole moment per unit length.

Srnka, L. J.↗

A search for the reported Ti II 3080 multiplet emission in late-type stars

Gurzadyan (1975), using a low-resolution objective-prism spectrograph, has reported the presence of both the multiplet Ti II 3080 and the doublet Mg II 2800 simultaneously either in emission or in absorption in late-type stars. Using the high-resolution spectrometers onboard Copernicus and BUSS, it is found that stars which display Mg II 2800 strongly in emission do not have a corresponding emission feature at 3080.

Oegerle, W. R.↗

Atmospheric Emission Photometric Imaging on Spacelab (AEPI)

Two parallel detector systems are used for atmospheric emission photometric emission. The top system is a TV system using the image intensified S.E.C. tube as the detector. The bottom system, the photon counting array (P.C.A.), uses a microchannel plate intensified anode array tube and is equivalent to a 100 channel photomultiplier. For the television, the filters are selected by means of a filter wheel set. The field of view of the is interchangeable between 20 and 6 degrees, by means of a moveable prism. The quartz window mu channel plate intensifier is fiber optically coupled to a 40-25 demagnifying tube which is in turn coupled to the S.E.C. tube. The PCA channel has a fixed field of view of 4 deg and a remote control interchangeable photometric converter optics which converts the imaging array into a multichannel photometer. The mu channel plate array tube amplifies the photons into detectable counts for the PCA electronics. The entire system is pointed by a two axis gimbal. The flight equipment to be acquired consists of a gyro package and an interactive flight control unit panel. The gyro package is necessary because of the inadequate attitude reference supplied by the current Spacelab systems.

Mende, S. B.↗

Roller skewing measurements in cylindrical roller bearings

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12,000 rpm are reported. High speed motion pictures of a modified roller were taken through a derotation prism to record skewing as the roller moved through loaded and unloaded regions of the bearing. Subsequent frame by frame measurement of the photographic film provided information on roller skewing. Radial and tangential skew amplitudes of 0.4 to 0.5 degrees were observed with 0.5 degree misalignment.

Nypan, L. J.↗

An investigation for the development of an integrated optical data preprocessor

A laboratory model of a 16 channel integrated optical data preprocessor was fabricated and tested in response to a need for a device to evaluate the outputs of a set of remote sensors. It does this by accepting the outputs of these sensors, in parallel, as the components of a multidimensional vector descriptive of the data and comparing this vector to one or more reference vectors which are used to classify the data set. The comparison is performed by taking the difference between the signal and reference vectors. The preprocessor is wholly integrated upon the surface of a LiNbO3 single crystal with the exceptions of the source and the detector. He-Ne laser light is coupled in and out of the waveguide by prism couplers. The integrated optical circuit consists of a titanium infused waveguide pattern, electrode structures and grating beam splitters. The waveguide and electrode patterns, by virtue of their complexity, make the vector subtraction device the most complex integrated optical structure fabricated to date.

Verber, C. M.↗

Analyzing and modeling gravity and magnetic anomalies using the SPHERE program and Magsat data

Computer codes were completed, tested, and documented for analyzing magnetic anomaly vector components by equivalent point dipole inversion. The codes are intended for use in inverting the magnetic anomaly due to a spherical prism in a horizontal geomagnetic field and for recomputing the anomaly in a vertical geomagnetic field. Modeling of potential fields at satellite elevations that are derived from three dimensional sources by program SPHERE was made significantly more efficient by improving the input routines. A preliminary model of the Andean subduction zone was used to compute the anomaly at satellite elevations using both actual geomagnetic parameters and vertical polarization. Program SPHERE is also being used to calculate satellite level magnetic and gravity anomalies from the Amazon River Aulacogen.

Braile, L. W.↗

A molecular model for ice nucleation and growth, attachment 1

The quantum mechanical technique is used to study ionic, configurational, and impurity defects in the ice surface. In addition to static calculations of the energetics of the water monomer-ice surface interactions, molecular dynamics studies were initiated. The calculations of the monomer-ice surface interaction, molecular dynamics studies were initiated. The calculations of monomer-ice surface interactions indicate that many adsorption sites exist on the ice surfaces and that the barriers between bonding sites are relatively low. Bonding on the prism face of ice is preferentially above lattice sites.

Plummer, P. L. M.↗

Middle- and far-ultraviolet observations of hot white dwarfs

Observations of HD 149499 B, the previously unrecognized white dwarf star found by the Skylab ultraviolet objective-prism survey, are discussed. Spectra of the binary HD 149499 AB were obtained by the short wavelength and long wavelength cameras of the IUE, and converted into fluxes. The absorption line strengths of the white dwarf secondary indicate a He/H composition ratio greater than or equal to 1. Comparison with model atmospheres of the IUE data suggests a temperature of around 93,000 K for HD 149499 B, while comparison with visual magnitude data indicates a temperature of 82,000 K. Either temperature value would make the star the hottest white dwarf for which reasonably reliable temperature estimates are available. Future work intended includes the repetition of the Skylab ultraviolet experiment on Spacelab for the detection of a complete sample of hot white dwarfs and subdwarfs.

Parsons, S. B.↗

Blue compact dwarf galaxies. I - Neutral hydrogen observations of 115 galaxies

HI observations are reported for a sample of 115 blue compact dwarf (M sub B greater than approximately -18) galaxies or 'extragalactic H II regions' chosen mostly from the objective prism surveys of Markarian (1967-1974) and Haro (1956), with a few objects from Zwicky (1971) and other investigators. Ninety-three galaxies are detected. H I profiles, neutral hydrogen masses, total masses, and all available optical data are given for the 115 galaxies in a consistent and homogeneous system and in a useful format for statistical studies. The data are used in a companion paper to study the stochastic mode of star formation in galaxies.

Thuan, T. X.↗

Photographic observations of comets at Lowell Observatory

Observations of Halley's comet at Lowell Observatory cover a period from November 10, 1909 to May 17, 1911: 334 direct photographs were taken, 118 objective prism spectra, and 32 slit spectrograms of the nucleus, many of them including 5 arc minutes of the surrounding coma. Just one morning's observations are illustrated as an example of utilizing every possible resource available at the Observatory at the time. Observational improvements developed since then are described and some suggestions for the coming return of Halley's comet are made.

Giclas, H. L.↗

Introducing the B stars

Methods for classifying B stars in the visible region by examining low reslution spectra; broadband colors; intermidiate band colors and H beta; absolute magnitude as a function of H beta and H gamma strength and of luminosity class; and the BCD system and its relation to the MK system are examined. The use of OAO-2 spectrophotometry; objective prism and objective grating spectra; and observations from the TD1 satellite for classifying B stars in the ultraviolet region are also discussed. Infrared and radio observations of these stars are reviewed as well as information available concerning masses, radii and velocity of escape.

Source record↗

Advances in Moire interferometry for thermal response of composites

An experimental technique for the precise measurement of the thermal response of both sides of a laminated composite coupon specimen uses Moire interferometry with fringe multiplication which yields a sensitivity of 833 nm (32.8 micro in.) per fringe. The reference gratings used are virtual gratings and are formed by partially mirrorized glass prisms in close proximity to the specimen. Results are compared with both results obtained from tests which used Moire interferometry on one side of composite laminates, and with those predicted by classical lamination theory. The technique is shown to be capable of producing the sensitivity and accuracy necessary to measure a wide range of thermal responses and to detect small side to side variations in the measured response. Tests were conducted on four laminate configurations of T300/5208 graphite epoxy over a temperature range of 297 K (75 F) to 422 K (300 F). The technique presented allows for the generation of reference gratings for temperature regimes well outside that used in these tests.

Brooks, E. W., Jr.↗