Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pointing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Passage and Survival of Chinook Salmon at Lookout Point Dam, Fall 2017 and Spring 2018 (Final Report)

This report presents the results of a fish passage and survival study conducted by the Pacific Northwest National Laboratory (PNNL) for the U.S. Army Corps of Engineers-Portland District (USACE) at Lookout Point Dam (Lookout Point) during fall 2017 (October–February) and spring 2018 (March–July). The goal of the study was to provide biologists, engineers, resource managers, and regional decisionmakers with information about the behavior, distribution, passage, and survival of juvenile Chinook salmon (Oncorhynchus tshawytscha) through the Lookout Point reservoir, project, and tailwaters. The results of this study are intended to inform decision-making about long-term structural and operational measures to help rebuild populations of Upper Willamette River Chinook salmon listed as threatened under the Endangered Species Act.

59 BASIC BIOLOGICAL SCIENCES↗

Application Potential of a Dew-Point Cooling Tower in Selected Energy Intensive Applications in Temperate Climate

In the article, the application potential of the dew-point cooling tower (DPCT) in selected energy-intensive applications in temperate climates was analyzed and discussed. The applications selected for analysis are power generation with natural gas turbines and chilled water air conditioning systems. The study is based on a mathematical model derived from a modified ε-NTU model. The model was validated against experimental results and showed satisfactory agreement with the experimental data. DPCT was compared with a typical cooling tower limited by the wet-bulb temperature (wet-bulb cooling tower, WBCT). The simulation results showed that DPCT is able to provide significant energy savings in energy-intensive applications; therefore, its application potential in temperate climates can be considered justified. In the case of gas turbines, DPCT was able to generate 2 to 10 percentage points more capacity than operating on outdoor air and 1.8 to 5 percentage points more than operating with WBCT. In the case of air conditioning systems, the system equipped with DPCT achieved EERs (energy efficiency ratios) higher by 1 to 7.2 compared to dry cooling and by 0.3 to 5.1 compared to systems equipped with WBCT. The annual energy savings obtained by the system with DPCT were 14.7 MWh compared to WBCT and 30 MWh compared to dry cooling.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Simulation of the 2003 Foss Barge - Point Wells Oil Spill: A Comparison between BLOSOM and GNOME Oil Spill Models

The Department of Energy’s (DOE’s) National Energy Technology Laboratory’s (NETL’s) Blowout and Spill Occurrence Model (BLOSOM), and the National Oceanic and Atmospheric Administration’s (NOAA’s) General NOAA Operational Modeling Environment (GNOME) are compared. Increasingly complex simulations are used to assess similarities and differences between the two models’ components. The simulations presented here are forced by ocean currents from a Finite Volume Community Ocean Model (FVCOM) implementation that has excellent skill in representing tidal motion, and with observed wind data that compensates for a coarse vertical ocean model resolution. The comprehensive comparison between GNOME and BLOSOM presented here, should aid modelers in interpreting their results. Beyond many similarities, aspects where both models are distinct are highlighted. Some suggestions for improvement are included, e.g., the inclusion of temporal interpolation of the forcing fields (BLOSOM) or the inclusion of a deflection angle option when parameterizing wind-driven processes (GNOME). Overall, GNOME and BLOSOM perform similarly, and are found to be complementary oil spill models. This paper also sheds light on what drove the historical Point Wells spill, and serves the additional purpose of being a learning resource for those interested in oil spill modeling. The increasingly complex approach used for the comparison is also used, in parallel, to illustrate the approach an oil spill modeler would typically follow when trying to hindcast or forecast an oil spill, including detailed technical information on basic aspects, like choosing a computational time step. We discuss our successful hindcast of the 2003 Point Wells oil spill that, to our knowledge, had remained unexplained. The oil spill models’ solutions are compared to the historical Point Wells’ oil trajectory, in time and space, as determined from overflight information. Our hindcast broadly replicates the correct locations at the correct times, using accurate tide and wind forcing. While the choice of wind coefficient we use is unconventional, a simplified analytic model supported by observations, suggests that it is justified under this study’s circumstances. We highlight some of the key oceanographic findings as they may relate to other oil spills, and to the regional oceanography of the Salish Sea, including recommendations for future studies.

42 ENGINEERING↗

A Comparative Study of Model Predictive Control and Optimal Causal Control for Heaving Point Absorbers

Efforts by various researchers in recent years to design simple causal control laws that can be applied to WEC devices suggest that these controllers can yield similar levels of energy output as those of more complex non-causal controllers. However, most studies were established without adequately considering device and power conversion system constraints which are relevant design drivers from a cost and economic point of view. It is therefore imperative to understand the benefits of MPC compared to causal control from a performance and constraint handling perspective. In this paper, we compare linear MPC to a casual controller that incorporates constraint handling to benchmark its performance on a one DoF heaving point absorber in a range of wave conditions. Our analysis demonstrates that MPC provides significant performance advantages compared to an optimized causal controller, particularly if significant constraints on device motion and/or forces are imposed. We further demonstrate that distinct control performance regions can be established that correlate well with classical point absorber and volumetric limits of the wave energy conversion device.

42 ENGINEERING↗

Lithium-ion drifting: Application to the study of point defects in floating-zone silicon

The use of lithium-ion (Li(+)) drifting to study the properties of point defects in p-type Floating-Zone (FZ) silicon crystals is reported. The Li(+) drift technique is used to detect the presence of vacancy-related defects (D defects) in certain p-type FZ silicon crystals. SUPREM-IV modeling suggests that the silicon point defect diffusivities are considerably higher than those commonly accepted, but are in reasonable agreement with values recently proposed. These results demonstrate the utility of Li(+) drifting in the study of silicon point defect properties in p-type FZ crystals. Finally, a straightforward measurement of the Li(+) compensation depth is shown to yield estimates of the vacancy-related defect concentration in p-type FZ crystals.

Silicon↗

Rover mast calibration, exact camera pointing, and camara handoff for visual target tracking

This paper presents three technical elements that we have developed to improve the accuracy of the visual target tracking for single-sol approach-and-instrument placement in future Mars rover missions. An accurate, straightforward method of rover mast calibration is achieved by using a total station, a camera calibration target, and four prism targets mounted on the rover. The method was applied to Rocky8 rover mast calibration and yielded a 1.1-pixel rms residual error. Camera pointing requires inverse kinematic solutions for mast pan and tilt angles such that the target image appears right at the center of the camera image. Two issues were raised. Mast camera frames are in general not parallel to the masthead base frame. Further, the optical axis of the camera model in general does not pass through the center of the image. Despite these issues, we managed to derive non-iterative closed-form exact solutions, which were verified with Matlab routines. Actual camera pointing experiments aver 50 random target image paints yielded less than 1.3-pixel rms pointing error. Finally, a purely geometric method for camera handoff using stereo views of the target has been developed. Experimental test runs show less than 2.5 pixels error on high-resolution Navcam for Pancam-to-Navcam handoff, and less than 4 pixels error on lower-resolution Hazcam for Navcam-to-Hazcam handoff.

camera handoff↗

Access to Mars from Earth-Moon Libration Point Orbits:

This investigation is focused specifically on transfers from Earth-Moon L(sub 1)/L(sub 2) libration point orbits to Mars. Initially, the analysis is based in the circular restricted three-body problem to utilize the framework of the invariant manifolds. Various departure scenarios are compared, including arcs that leverage manifolds associated with the Sun-Earth L(sub 2) orbits as well as non-manifold trajectories. For the manifold options, ballistic transfers from Earth-Moon L(sub 2) libration point orbits to Sun-Earth L(sub 1)/L(sub 2) halo orbits are first computed. This autonomous procedure applies to both departure and arrival between the Earth-Moon and Sun-Earth systems. Departure times in the lunar cycle, amplitudes and types of libration point orbits, manifold selection, and the orientation/location of the surface of section all contribute to produce a variety of options. As the destination planet, the ephemeris position for Mars is employed throughout the analysis. The complete transfer is transitioned to the ephemeris model after the initial design phase. Results for multiple departure/arrival scenarios are compared.

Dynamical Systems↗

Reconfigurable Pointing Control for High Resolution Space Spectroscopy

In this paper, a pointing control performance criteria is established to suppport high resolution space spectroscopy. Results indicate that these pointing control requirements are very stringent, and would typically be difficult to meet using standard 3-axis spacecraft control. To resolve this difficulty, it is shown that performance can be significantly improved using a reconfigurable control architecture that switches among a small bankof detuned Kalman filters. The effectiveness of the control reconfiguration approach is demonstrated by example on the Space Infra-Red Telescope Facility (SIRTF) pointing system, in support of the InfraRed Spectrograph (IRS) payload.

spectroscophy spacecraft pointing spacecraft contr↗

Normalized Point Source Sensitivity for Off-Axis Optical Performance Evaluation of the Thirty Meter Telescope

The Normalized Point Source Sensitivity (PSSN) has previously been defined and analyzed as an On-Axis seeing-limited telescope performance metric. In this paper, we expand the scope of the PSSN definition to include Off-Axis field of view (FoV) points and apply this generalized metric for performance evaluation of the Thirty Meter Telescope (TMT). We first propose various possible choices for the PSSN definition and select one as our baseline. We show that our baseline metric has useful properties including the multiplicative feature even when considering Off-Axis FoV points, which has proven to be useful for optimizing the telescope error budget. Various TMT optical errors are considered for the performance evaluation including segment alignment and phasing, segment surface figures, temperature, and gravity, whose On-Axis PSSN values have previously been published by our group.

optical performance metric↗

Challenges and Solutions for Precision Solar Pointing on the ISS for the TSIS Instrument

The International Space Station offers an attractive platform for external payloads in many regards, but its large, complex structure is challenging for payloads that require precise, unobstructed pointing. As an instrument that measures solar irradiance on a continual basis, the TSIS payload was designed to robustly account for these ISS challenges and is now performing its mission on the ISS with great success.This paper first describes how TSIS was able to measure the ISS background jitter using High-rate Fine Sun Sensor data that was taken during passive solar transits through its field of view. The measurements showed that ISS jitter at the TSIS location on ELC-3 Site 5 is relatively benign with less than 4 arcseconds 1 at frequencies less than 0.5 Hz. This value is lower than previous estimates but agrees well with recent measurements from other external payloads, including OPALS and SAGE III. Because TSIS was designed to be robust to base motion jitter, it has achieved less than 4 arcseconds 1 of pointing error, which provides an extremely precise pointing platform for the solar irradiance measurements. The other challenging ISS characteristic is its large, complex structure that obscures solar viewing at sunrise and sunset from the zenith-facing location of TSIS. Although TSIS was able to predict solar viewing durations during the design phase with relatively high accuracy, the exact timing and causes of obscuration were difficult to predict and understand after TSIS began operating on the ISS. To aid in the understanding of blockage by ISS structure, detailed obscuration maps were created using HFSS measurements that clearly show the exact gimbal angles where blockage occurs and the specific structural features of the ISS that cause the blockage. These maps have helped TSIS to maximize its solar tracking durations each orbit, which has supported the mission in meeting its science objectives.

background jitter↗

Dew Point Simulation and Analysis of the Heat Melt Compactor Gas Effluent

The effluent gases and water vapor of the Trash Compaction and Processing System (TCPS) can be vented through the Vacuum Exhaust System (VES) if requirements are met. One of the constraints in this venting scenario is the dew point of the exhaust gases disposed into the VES must be less than 15.5 °C. With simulations using Aspen Plus and the effluent gas sample results of the Heat Melt Compactor (HMC), flash calculations were conducted in the modeling study to calculate the feed temperature and dew point at fixed pressures. Saturated vapor curves were produced and provided a preliminary result on optimal feed conditions that satisfy the dew point and vapor-phase only requirements after flashing across the throttle valve towards the VES.

trash↗

Unsupervised Change Detection for Space Habitats Using 3D Point Clouds

This work presents an algorithm for scene change detection from point clouds to enable autonomous robotic caretaking in future space habitats. Autonomous robotic systems will help maintain future deep-space habitats, such as the Gateway space station, which will be uncrewed for extended periods. Existing scene analysis software used on the International Space Station (ISS) relies on manually-labeled images for detecting changes. In contrast, the algorithm presented in this work uses raw, unlabeled point clouds as inputs. The algorithm first applies modified Expectation-Maximization Gaussian Mixture Model (GMM) clustering to two input point clouds. It then performs change detection by comparing the GMMs using the Earth Mover’s Distance. The algorithm is validated quantitatively and qualitatively using a test dataset collected by an Astrobee robot in the NASA Ames Granite Lab comprising single frame depth images taken directly by Astrobee and full-scene reconstructed maps built with RGB-D and pose data from Astrobee. The runtimes of the approach are also analyzed in depth. The source code is publicly released to promote further development.

robotics↗

On the Recoverability of Reactor Dynamics from Point Kinetics Data using SINDYc

Data driven models for reactor dynamics tend to face a few notable challenges. First, the broad range of timescales present across the various feedback mechanisms. Next, high standards for safety and importance of model performance in all operational domains. Finally, the correlations between state variables observed in most transients leads to difficulties when methods attempt to attribute certain dynamic phenomena to a particular cause. The current paper seeks to support efforts towards incorporating physics knowledge into one particular data-driven method for finding reactor dynamics called ``Sparse Identification of Nonlinear Dynamics with Control (SINDYc). The incorporation of physical knowledge into SINDYc will help address the challenges listed above by giving the model an initial understanding of the system being modeled. The demonstration of an exact representation of a set of point reactor dynamics equations in SINDYc is provided. Then, this allows for further discussion with mathematical justification as to why SINDYc, and other data-driven methods, may be difficult to apply to nuclear reactor dynamics due to correlations in the state variables. A particularly useful result of this work is the set of candidate functions required in SINDYc to exactly represent the reactor dynamics under a point approximation. In the future, SINDYc can be integrated with point models for reactor dynamics before being applied to the physical system to yield higher accuracy.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Search for Point Sources of High Energy Neutrinos with Final Data from AMANDA-II

We present a search for point sources of high energy neutrinos using 3.8 years of data recorded by AMANDA-II during 2000-2006. After reconstructing muon tracks and applying selection criteria designed to optimally retain neutrino-induced events originating in the Northern Sky, we arrive at a sample of 6595 candidate events, predominantly from atmospheric neutrinos with primary energy 100 GeV to 8 TeV. Our search of this sample reveals no indications of a neutrino point source. We place the most stringent limits to date on E{sup -2} neutrino fluxes from points in the Northern Sky, with an average upper limit of E{sup 2}{Phi}{sub {nu}{sub {mu}}+{nu}{sub {tau}}} {le} 5.2 x 10{sup -11} TeV cm{sup -2} s{sup -1} on the sum of {nu}{sub {mu}} and {nu}{sub {tau}} fluxes, assumed equal, over the energy range from 1.9 TeV to 2.5 PeV.

79 ASTRONOMY AND ASTROPHYSICS↗

FIRST NEUTRINO POINT-SOURCE RESULTS FROM THE 22-STRING ICECUBE DETECTOR

We present new results of searches for neutrino point sources in the northern sky, using data recorded in 2007-08 with 22 strings of the IceCube detector (approximately one-fourth of the planned total) and 275.7 days of livetime. The final sample of 5114 neutrino candidate events agrees well with the expected background of atmospheric muon neutrinos and a small component of atmospheric muons. No evidence of a point source is found, with the most significant excess of events in the sky at 2.2 {sigma} after accounting for all trials. The average upper limit over the northern sky for point sources of muon-neutrinos with E{sup -2} spectrum is E{sup 2} {Phi}{sub {nu}{sub {mu}}} < 1.4 x 10{sup -1} TeV cm{sup -2}s{sup -1}, in the energy range from 3 TeV to 3 PeV, improving the previous best average upper limit by the AMANDA-II detector by a factor of two.

79 ASTRONOMY AND ASTROPHYSICS↗

Extending the search for neutrino point sources with IceCube above the horizon

Point source searches with the IceCube neutrino telescope have been restricted to one hemisphere, due to the exclusive selection of upward going events as a way of rejecting the atmospheric muon background. We show that the region above the horizon can be included by suppressing the background through energy-sensitive cuts. This approach improves the sensitivity above PeV energies, previously not accessible for declinations of more than a few degrees below the horizon due to the absorption of neutrinos in Earth. We present results based on data collected with 22 strings of IceCube, extending its field of view and energy reach for point source searches. No significant excess above the atmospheric background is observed in a sky scan and in tests of source candidates. Upper limits are reported, which for the first time cover point sources in the southern sky up to EeV energies.

79 ASTRONOMY AND ASTROPHYSICS↗

Physical Point Simulation in 2+1 Flavor Lattice QCD

We present the results of the physical point simulation in 2+1 flavor lattice QCD with the nonperturbatively O(a)-improved Wilson quark action and the Iwasaki gauge action at {beta} = 1.9 on a 32{sup 3} x 64 lattice. The physical quark masses together with the lattice spacing is determined with m{sub {pi}}, m{sub K} and m{sub {Omega}} as physical inputs. There are two key algorithmic ingredients to make possible the direct simulation at the physical point: One is the mass-preconditioned domain-decomposed HMC algorithm to reduce the computational cost. The other is the reweighting technique to adjust the hopping parameters exactly to the physical point. The physics results include the hadron spectrum, the quark masses and the pseudoscalar meson decay constants. The renormalization factors are nonperturbatively evaluated with the Schroedinger functional method. The results are compared with the previous ones obtained by the chiral extrapolation method.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First‐Principles Calculations of Quantum Efficiency for Point Defects in Semiconductors: The Example of Yellow Luminance by GaN: C N +O N and GaN:C N

Abstract Point defects play an important role in the photoelectrical properties of semiconductor materials, and they can be luminescence centers. However, the relationships among the observed luminescence wavelengths, intensities, and the microscopic processes are in most cases unknown, or depend heavily on parameter fitting. In this work, the light‐emitting quantum efficiencies for point defects using ab initio density functional theory are calculated. The study of radiation recombination for electrons and nonradiation recombination for holes is reported here. The results show that the defect C N transition between “−” and “0” charged levels and the defect C N +O N transition between “0” and “+” charged levels both may be responsible for the yellow luminescence (YL) which is observed in experiment. Moreover, the calculation shows significant thermal quenching of the YL starting at 480 K due to re‐excitation of hole into the valence band from the point defects, which is in relatively good agreement with the experimentally observed value. This work shows that it is possible to use ab initio calculations to understand the microscopic mechanisms and the competitions among different channels for the light emissions caused by defects.

Zhang, Hai‐Shan↗