Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

JAN transistor and diode characterization test program, JANTX diode 1N649-1

The data processing and calculation of statistical parameters was performed by the Tektronix computer system. The data acquired for easy vendor to vendor and date code to date code analysis are summarized. Each parameter is presented with test conditions, mean, standard deviation, lowest reading, 10% point (where 10% of all readings are equal to or less than the indicated reading), 90% point (where 90% of all readings are equal to or less than the indicated reading) and the highest reading.

Takeda, H.↗

JAN transistor and diode characterization test program: JANTX diode 1N759A

The necessary data to create a new class of specifications was the objective of this characterization program. Sample selection was made according to the following criteria: (1) manufacturer or qualified distributor; (2) two vendors; and (3) two date codes. The general guidelines for procurement were two QPL vendors, JAN or JANTX, and two manufacturing lots, 27 from each lot. All data were acquired with three digit accuracy. The data processing and calculation of statistical parameters were performed by the Tektronix computer system using 4 digit display.

Takeda, H.↗

Extensions to the classical calculation of the effect of mutual shadowing in diffuse reflection

The classical method for accounting for the mutual shadowing among closely packed particles in multiple scattering calculations is extended in the following ways. (1) By modeling the particle distribution by a Poisson process with a varying density parameter, a 'Van der Waals' type approximation allows extension to a greater fractional volume density, D. In this case it is only required that D squared be much less than 1 instead of D being much less than 1. (2) In the case that the particle distribution is not uniform the classical calculation may be weighted by the pair correlation function of the distribution. (3) The use of the Markov chain formalism for radiative transfer allows inclusion of the effect of shadowing for two orders of scattering. For conditions such as might apply in Saturn's rings, the inclusion of this effect makes less than a 0.1% difference in the calculated phase curves, compared to previous calculations which have included shadowing only in the first scattering. The latter are thus shown to be quite accurate.

Esposito, L. W.↗

Bosch - An alternate CO2 reduction technology

The Bosch process is the most promising CO2 reduction concept for future prolonged space missions. The paper presents the design of a three-person-capacity preprototype B-CRS (Bosch-based CO2 Reduction Subsystem). It is sized to reduce 3.0 kg/d CO2 generated by the crew and to supply the product water to an O2 generation subsystem to obtain O2. The design supports future development of the B-CRS as an alternative CO2 reduction subsystem to the Sabatier-based process presently under test at NASA. The discussion covers the Bosch CO2 reduction concept, process and hardware description, performance parameters, design specifications, subsystem schematic and operation, mechanical subsystem summary, control/monitor instrumentation, and subsystem packaging. A B-CRS with a proven technological base is an attractive CO2 reduction subsystem that eliminates overboard venting.

Heppner, D. B.↗

Adaptive and learning control of large space structures

The paper describes the adaptive learning system for space operations which assumes that structural testing can be conducted during deployment and assembly. Simulation results using the solar electric propulsion array and a novel remote sensor are presented; they involve faster scan television coverage of the motions of the array from four cameras on the corners of the Space Shuttle payload bay. The description of the simulation, the filtering algorithm for processing the TV data, the parameter extraction algorithm, and the simulation results are presented.

Montgomery, R. C.↗

Decoupled control of a long flexible beam in orbit

Control involved commanding changes in pitch attitude as well as nulling initial disturbances in the pitch and flexible modes. Control force requirements were analyzed. Also, the effects of parameter uncertainties on the decoupling process were analyzed and were found to be small. Two methods were investigated: the system was completely coupled and certain actuators were then eliminated, one by one, which resulted in some or all modes not fully controlled; specified modes of the system were excluded from the decoupling control law by employing viewer control actuators than modes in the model. In both methods, adjustments were made in the feedback gains to include the uncontrolled modes in the overall control of the system.

Hamer, H. A.↗

Requirements and preliminary design for a general purpose real-time executive for flight computers

The requirements and preliminary design of a general purpose, real-time executive computers program for flight computers are provided. A description and the requirements are included for the major elements of the executive: an initialization model, a task scheduler, and an interrupt handler. Task priorities and various process interrupts are discussed. System parameters and variables are identified which make the design adaptable to various flight computer and applicaton specifications.

Smith, K. A.↗

Development of aircraft lavatory compartments with improved fire resistance characteristics. Phase 4: Sandwich panel decorative ink development

Five chemically different resin systems with improved fire resistance properties were studied for a possible screenprinting ink application. Fire resistance is hereby defined as the cured ink possessing improvements in flammability, smoke emission, and thermal stability. The developed ink is for application to polyvinyl fluoride film. Only clear inks without pigments were considered. Five formulations were evaluated compared with KC4900 clear acrylic ink, which was used as a baseline. The tests used in the screening evaluation included viscosity, smoke and toxic gas emission, limiting oxygen index (LOI), and polyvinyl fluoride film (PVF) printability. A chlorofluorocarbon resin (FPC461) was selected for optimization studies. The parameters for optimization included screenprinting process performance, quality of coating, and flammability of screenprinted 0.051-mm (0.002-in.) white Tedlar. The quality of the screenprinted coating on Tedlar is dependent on viscosity, curing time, adhesion to polyvinyl fluoride film, drying time (both inscreen and as an applied film), and silk screen mesh material and porosity.

Jayarajan, A.↗

Overview of Characterization Techniques for High Speed Crystal Growth

Features of characterization requirements for crystals, devices and completed products are discussed. Key parameters of interest in semiconductor processing are presented. Characterization as it applies to process control, diagnostics and research needs is discussed with appropriate examples.

Ravi, K. V.↗

Aerodynamic instability: A case history

The identification, diagnosis, and final correction of complex machinery malfunctions typically require the correlation of many parameters such as mechanical construction, process influence, maintenance history, and vibration response characteristics. The progression is reviewed of field testing, diagnosis, and final correction of a specific machinery instability problem. The case history presented addresses a unique low frequency instability problem on a high pressure barrel compressor. The malfunction was eventually diagnosed as a fluidic mechanism that manifested as an aerodynamic disturbance to the rotor assembly.

Eisenmann, R. C.↗

Optimization of aircraft trajectories through severe microbursts

A method of defining performance envelopes for aircraft microburst penetration is being developed. A trajectory is computed for a given aircraft/control law configuration and given microburst parameters (either a downdraft or a head/tailwind type microburst). The maximum deviation from the nominal altitude is recorded for that trajectory. Then the microburst parameters are varied, and the process is repeated. Thus a three dimensional plot of maximum altitude deviation versus microburst range scale and intensity is generated. Finally, a certain maximum altitude deviation, say 50 feet, is defined as the safe penetration limit. Then the 50 foot level contour becomes the performance limit for safe operation as a function of microburst intensity and range. Control inputs from deterministic trajectory optimization are used in the above described calculations to define the maximal performance limit. These limits provide targets for the designer of practical control laws.

Psiaki, Mark L.↗

An algorithmic approach to crustal deformation analysis

In recent years the analysis of crustal deformation measurements has become important as a result of current improvements in geodetic methods and an increasing amount of theoretical and observational data provided by several earth sciences. A first-generation data analysis algorithm which combines a priori information with current geodetic measurements was proposed. Relevant methods which can be used in the algorithm were discussed. Prior information is the unifying feature of this algorithm. Some of the problems which may arise through the use of a priori information in the analysis were indicated and preventive measures were demonstrated. The first step in the algorithm is the optimal design of deformation networks. The second step in the algorithm identifies the descriptive model of the deformation field. The final step in the algorithm is the improved estimation of deformation parameters. Although deformation parameters are estimated in the process of model discrimination, they can further be improved by the use of a priori information about them. According to the proposed algorithm this information must first be tested against the estimates calculated using the sample data only. Null-hypothesis testing procedures were developed for this purpose. Six different estimators which employ a priori information were examined. Emphasis was put on the case when the prior information is wrong and analytical expressions for possible improvements under incompatible prior information were derived.

Iz, Huseyin Baki↗

On the interconnection of dynamic processes in the lower thermosphere with meteorological phenomena in the tropostratosphere

Nowadays the atmosphere is considered a single dynamic system governed by inner and other factors, the separate layers (troposphere, strato-mesosphere, thermosphere) of which are in a state of interaction though they differ physically from one another in thermal stratification and energetic processes. Observational data of thermodynamic parameter connections in these layers height range are presented. The interconnection between the temperature field disturbances in the tropo-stratosphere and the dynamic regime in the lower thermosphere in winter and summer is defined as revealed by observational data.

Fakhrutdinova, A. N.↗

Development of a generic combustion stability code for liquid propellant rocket engines

The mathematical framework for a combustion stability analysis code is outlined. The goal for the code is to be general enough in problem treatment so that its validity and accuracy extend over a wide range of problem applications and that it lends the convenience for any future model improvement if necessary. An approach for modeling the combustion dynamics is devised to meet both requirements. An open-loop numerical procedure is also developed to mechanistically model various combustion processes for determining the stability parameters.

Fang, J. J.↗

A high speed buffer for LV data acquisition

The laser velocimeter (autocovariance) buffer interface is a data acquisition subsystem designed specifically for the acquisition of data from a laser velocimeter. The subsystem acquires data from up to six laser velocimeter components in parallel, measures the times between successive data points for each of the components, establishes and maintains a coincident condition between any two or three components, and acquires data from other instrumentation systems simultaneously with the laser velocimeter data points. The subsystem is designed to control the entire data acquisition process based on initial setup parameters obtained from a host computer and to be independent of the computer during the acquisition. On completion of the acquisition cycle, the interface transfers the contents of its memory to the host under direction of the host via a single 16-bit parallel DMA channel.

Cavone, Angelo A.↗

Reanalysis, compatibility and correlation in analysis of modified antenna structures

A simple computational procedure is synthesized to process changes in the microwave-antenna pathlength-error measure when there are changes in the antenna structure model. The procedure employs structural modification reanalysis methods combined with new extensions of correlation analysis to provide the revised rms pathlength error. Mainframe finite-element-method processing of the structure model is required only for the initial unmodified structure, and elementary postprocessor computations develop and deal with the effects of the changes. Several illustrative computational examples are included. The procedure adapts readily to processing spectra of changes for parameter studies or sensitivity analyses.

Levy, R.↗

GPS-based system for satellite tracking and geodesy

High-performance receivers and data processing systems developed for GPS are reviewed. The GPS Inferred Positioning System (GIPSY) and the Orbiter Analysis and Simulation Software (OASIS) are described. The OASIS software is used to assess GPS system performance using GIPSY for data processing. Consideration is given to parameter estimation for multiday arcs, orbit repeatability, orbit prediction, daily baseline repeatability, agreement with VLBI, and ambiguity resolution. Also, the dual-frequency Rogue receiver, which can track up to eight GPS satellites simultaneously, is discussed.

Bertiger, Willy I.↗