Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Determination of copper nanoparticle size distributions with total reflection X-ray fluorescence spectroscopy

Total reflection X-ray fluorescence (TXRF) analysis is extensively used by the semiconductor industry for measuring trace metal contamination on silicon surfaces. In addition to determining the quantity of impurities on a surface, TXRF can reveal information about the vertical distribution of contaminants by measuring the fluorescence signal as a function of the angle of incidence. In this study, two samples were intentionally contaminated with copper in non-deoxygenated and deoxygenated ultrapure water (UPW) resulting in impurity profiles that were either atomically dispersed in a thin film or particle-like, respectively. The concentration profile of the samples immersed into deoxygenated UPW was calculated using a theoretical concentration profile representative of particles, yielding a mean particle height of 16.1 nm. However, the resulting theoretical profile suggested that a distribution of particle heights exists on the surface. The fit of the angular distribution data was further refined by minimizing the residual error of a least-squares fit employing a model with a Gaussian distribution of particle heights about the mean height. The presence of a height distribution was also confirmed with atomic force microscopy measurements.

36 MATERIALS SCIENCE↗

High Sensitivity Attenuated Total Reflection Fourier Transform Infrared Spectroscopy Study of Ultrathin ZrO2 Films: A Study of Phase Change

Attenuated total reflection fourier transform infrared spectroscopy (FTIR ATR) was performed on ultrathin ZrO2 films as thin as {approx}3.0 nm deposited on silicon. An observed vibrational mode near 710 cm-1 undergoes a very pronounced absorption line shape change, corresponding to a structural phase change, as a function of film thickness and thermal processing. This absorption, attributed to the Eu(LO2) and A2u(LO) modes of tetragonal ZrO2, marks the first experimental measurement and verification of vibrational modes for tetragonal ZrO2 in this spectral range. The FTIR-ATR method shows promise as an extremely sensitive and nondestructive tool for high-kappa dielectric film characterization.

36 MATERIALS SCIENCE↗

Reflection high-energy electron diffraction evaluation of thermal deoxidation of chemically cleaned Si, SiGe, and Ge layers for solid-source molecular beam epitaxy

The authors present a study on the thermal evolution of the reflection high-energy electron diffraction pattern of chemically cleaned (001)-oriented Si, Ge, and SiGe surfaces, associating observed changes in the reconstructions with the desorption of known residual contaminants for Si and Ge surfaces. The implications of residual oxides prior to epitaxy on stacking fault densities in the grown films are presented. Further evidence for the two-phase nature of oxides on SiGe surfaces is provided, demonstrating that it is necessary to heat a SiGe surface up to the thermal deoxidation temperature of a Si surface to obtain stacking fault-free growth.

36 MATERIALS SCIENCE↗

Portable total reflection x-ray fluorescence analysis in the identification of unknown laboratory hazards

In this study, a portable total reflection x-ray fluorescence (TXRF) spectrometer was used to analyze unknown laboratory hazards that precipitated on exterior surfaces of cooling pipes and fume hood pipes in chemical laboratories. With the aim to examine the accuracy of TXRF analysis for the determination of elemental composition, analytical results were compared with those of wavelength-dispersive x-ray fluorescence spectrometry, scanning electron microscope and energy-dispersive x-ray spectrometry, energy-dispersive x-ray fluorescence spectrometry, inductively coupled plasma atomic emission spectrometry, x-ray diffraction spectrometry (XRD), and x-ray photoelectron spectroscopy (XPS). Detailed comparison of data confirmed that the TXRF method itself was not sufficient to determine all the elements (Z > 11) contained in the samples. In addition, results suggest that XRD should be combined with XPS in order to accurately determine compound composition. This study demonstrates that at least two analytical methods should be used in order to analyze the composition of unknown real samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

How reduced vacuum pumping capability in a coating chamber affects the laser damage resistance of HfO 2 /SiO 2 antireflection and high-reflection coatings

Here, optical coatings with the highest laser damage thresholds rely on clean conditions in the vacuum chamber during the coating deposition process. A low-base pressure in the coating chamber, as well as the ability of the vacuum system to maintain the required pressure during deposition, are important aspects of limiting the amount of defects in an optical coating that could induce laser damage. Our large optics coating chamber at Sandia National Laboratories normally relies on three cryo pumps to maintain low pressures for e-beam coating processes. However, on occasion, one or more of the cryo pumps have been out of commission. In light of this circumstance, we explored how deposition under compromised vacuum conditions resulting from the use of only one or two cryo pumps affects the laser-induced damage thresholds of optical coatings. The coatings of this study consist of HfO 2 and SiO 2 layer materials and include antireflection coatings for 527 nm at normal incidence and high-reflection coatings for 527 nm at 45-deg angle of incidence in P-polarization.

36 MATERIALS SCIENCE↗

Reflection-Absorption Infrared Spectroscopy of Thin Films Using an External Cavity Quantum Cascade Laser

We present experimental demonstrations using a broadly tunable external cavity quantum cascade laser (ECQCL) to perform Reflection-Absorption InfraRed Spectroscopy (RAIRS) of thin layers and residues on surfaces. The ECQCL compliance voltage was used to measure fluctuations in the ECQCL output power and improve the performance of the RAIRS measurements. Absorption spectra from self-assembled monolayers of a fluorinated alkane thiol and a thiol carboxylic acid were measured and compared with FTIR measurements. RAIRS spectra of the explosive compounds PETN, RDX, and tetryl deposited on gold substrates were also measured. Rapid measurement times and low noise were demonstrated, with < 1E-3 absorbance noise for a 10 second measurement time.

Infrared Spectroscopy↗

Using spectroscopic ellipsometry and single-angle reflectance to derive accurate optical constants for chemical forms of aspartame

Variable angle spectroscopic ellipsometry and single-angle infrared reflectance methods have been used to derive the complex optical constants n and k in the mid-infrared spectral region for aspartame. Aspartame exists in four unique forms – three of which incorporate water into the lattice, as well as the anhydrate form. The different forms can induce splitting or slight wavenumber shifts in the spectral features. Pressed pellets of neat powder were prepared and measured using both methods to derive the optical constants. Different n and k values were obtained depending on the percentage of the forms of aspartame, which was determined using powder X-ray diffraction (XRD) analysis.

optical constants, refractive index, extinction co↗

Determining the Size of Pores in a Partially Transparent Ceramics from Total-Reflection Spectra

A technique is proposed for determining the pore-size distribution based on measuring the dependence of total reflectance in the domain of partial transparency of a material. An assumption about equality of scattering-coefficient spectra determined by solving the inverse radiation transfer problem and by theoretical calculation with the Mie theory is used. The technique is applied to studying a quartz ceramics. The poresize distribution is also determined using mercury and gas porosimetry. All three methods are shown to produce close results for pores with diameters of <180 nm, which occupy ~90% of the void volume. In the domain of pore dimensions of >180 nm, the methods show differences that might be related to both specific procedural features and the structural properties of ceramics. The spectral-scattering method has a number of advantages over traditional porosimetry, and it can be viewed as a routine industrial technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of several Kikuchi lines in the vicinity of spot reflections

Kikuchi electron diffraction patterns of silicon have been obtained which demonstrate the simultaneous enhancement of several excess Kikuchi lines near different point reflections. This enhancement is explained within the elementary mechanism of the formation of Kikuchi patterns while taking into account the Kikuchi electron double diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystals with an Open Wave-Vector Surface: Peculiarities of Reflection and Possibilities of Designing Flat Lenses

The frequency dependence of the reflection coefficient of MgF{sub 2} crystal in the frequency range of 200-800 cm{sup -1} at different orientations of the optical axis has been investigated. The experimental data are compared with the calculation results. This comparison confirms that the wave vectors for the extraordinary wave have an open surface. This makes it possible to focus a divergent beam refracted at a flat boundary ori- ented perpendicularly to the optical crystal axis. The focusing effect of a plane-parallel MgF{sub 2} crystal plate is calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mutual transformation of light waves by reflection holograms in photorefractive crystals of the 4-bar 3m symmetry

The mutual transformation of light waves in the case of their simultaneous diffraction from a bulk reflection phase hologram, which was formed in a cubic photorefractive crystal of the 4-bar 3m symmetry class, has been studied. The indicator surfaces of the polarization-optimized values of the relative intensity of the object wave, which make it possible to determine the amplification of this wave for any crystal cut, are constructed. The linear polarization azimuths at which the energy exchange between the light waves reaches a maximum are found numerically for crystals of different cuts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Andreev bound states. Some quasiclassical reflections

We discuss a very simple and essentially exactly solvable model problem which illustrates some nice features of Andreev bound states, namely, the trapping of a single Bogoliubov quasiparticle in a neutral s-wave BCS superfluid by a wide and shallow Zeeman trap. In the quasiclassical limit, the ground state is a doublet with a splitting which is proportional to the exponentially small amplitude for “normal” reflection by the edges of the trap. We comment briefly on a prima facie paradox concerning the continuity equation and conjecture a resolution to it.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reflection of a probe pulse and thermal emission of electrons produced by an aluminum film heated by a femtosecond laser pulse

It is shown that an experimental decrease in the reflection of a probe femtosecond pulse from an aluminum film heated by a higher-power femtosecond pulse can be quantitatively described taking into account the inhomogeneous distribution of the laser pulse field in the film and the evolution of the electron and lattice temperature during absorption of the heating inhomogeneous field. Analysis of the electron temperature evolution on the heated film surface combined with modern concepts about the influence of a surface volume charge on thermal emission gave the relation between the amount of emitted electrons and experimental data on the heating of the aluminum film by the femtosecond pulse.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective reflection of laser radiation from submicron layers of Rb and Cs atomic vapors: Applications in atomic spectroscopy

We studied selective reflection (SR) of laser radiation from a window of a nanocell with thickness L ~ λ{sub 1,2}/2 filled with Rb and Cs atoms, where λ{sub 1} = 780 nm and λ{sub 2} = 852 nm are the wavelengths resonant with the D{sub 2} laser lines for Rb and Cs, respectively. It is demonstrated that the negative derivative of the SR signal profile for L > λ/2 changes to the positive one for L < λ/2. It is shown that the real-time formation of the SR signal profile derivative (SRD) with the spectral width 30–40 MHz and located at the atomic transition is, in particular, a convenient frequency marker of D{sub 2} transitions in Rb and Cs. The amplitudes of SRD signals are proportional to the atomic transition probabilities. A comparison with the known saturated absorption (SA) method demonstrated a number of advantages, such as the absence of cross-over resonances in the SRD spectrum, the simplicity of realization, a low required power, etc. An SRD frequency marker also operates in the presence of the Ne buffer gas at a pressure of 6 Torr, which allowed us to determine the Ne–Rb collisional broadening, whereas the SA method is already inapplicable at buffer gas pressures above 0.1 Torr. The realization simplicity makes the SRD method a convenient tool for atomic spectroscopy. Our theoretical model well describes the SRD signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective Reflection of Potassium Vapor Nanolayers in a Magnetic Field

The selective reflection of laser radiation from the interface between a dielectric window and the atomic vapors confined in a nanocell of thickness L ≈ 350 nm is used to develop effective Doppler-broadening- free spectroscopy of potassium atoms. A small atomic line width and a relation between the signal intensity and the transition probability allowed us to resolve four lines of atomic transitions responsible for the D1 lines of the {sup 39}K and {sup 41}K isotopes. Two groups containing four atomic transitions form in an applied magnetic field upon pumping by radiation with circular polarization σ{sup +} or σ{sup –}. Different intensities (probabilities) of transitions for the σ{sup +} and σ{sup –} excitations are detected in magnetic field B{sub 0} ≈ A{sub hfs}/μ{sub B} ≈ 165 G (A{sub hfs} is the magnetic dipole constant for the ground state and μ{sub B} is the Bohr magneton). A substantially different situation is observed at B ≫ B{sub 0}, since high symmetry appears for the two groups formed by radiation with circular polarization σ{sup +} or σ{sup –}. Each group is the mirror image of the other group with respect to the frequency of the 4{sup 2}S{sub 1/2}–4{sup 2}P{sub 1/2} transition, which additionally proves the occurrence of the complete Paschen–Back regime of the hyperfine structure at B ≈ 2.5 kG. A developed theoretical model well reproduces the experimental results. Possible practical applications are described. The results obtained can also be applied to the D{sub 1} lines of {sup 87}Rb and {sup 23}Na.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Masking of a High-Reflectivity Sphere by a Layer with a Random Quasi-Zero Refractive Index

The method of masking of a large-radius sphere made of an arbitrary material by a masking coating with a random quasi-zero refractive index is substantiated theoretically and experimentally. In this method of masking, the sphere is first coated with a mirror layer (e.g., high-reflectivity silver) and then with a masking layer with a thickness much smaller than the radius of the sphere. The fraction of the external radiation intensity bending around the sphere at the points of observation near the surface of the sphere and the extinction cross section of the sphere with the masking coating for points of observation far away from the sphere are calculated. It is shown that extinction cross section Q of the sphere with a masking coating is much smaller than 2D, where D is the geometrical cross section of the sphere; this corresponds to the masking effect for the sphere in the wavelength range of at least 450–1200 nm in the transparency region of the masking coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities in Transmission (Reflection) of Ultrashort Resonant Laser Pulses by a Thin Semiconductor Film in the Conditions of Exciton and Biexciton Excitation

We have studied the nonstationary transmission of two ultrashort laser pulses incident on a thin film. The radiation frequency of one of these pulses is in resonance with the two-photon transition from the ground state of the crystal to the biexciton state, while the other pulse coherently mixes the exciton and biexciton states, leading to strong renormalization of the energy spectrum of the crystal. We have obtained a system of nonlinear equations describing the time evolution of the exciton and biexciton amplitudes and the fields of three pulses transmitted through the film. We have analyzed the effect of amplitudes and widths of incident pulsed and of the time delay between them on the peculiarities of film transmission of these pulses. We have predicted the effect of a substantial time delay in the generation of the pulse transmitted through the film relative to the incident pulse, which is in resonance with the exciton–biexciton transition frequency. The possibility of generation of a precursor, viz., a pulse transmitted through the film sooner than the peak of the incident pulse reaches the film, as well as possibility of generation of a reflected pulse in the absence of the incident pulse, has been proven.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of terahertz radiation in the reflection of a laser pulse from a dense plasma

The generation of low-frequency (terahertz) electromagnetic radiation in the reflection of a laser pulse from the boundary of a dense plasma is considered. Low-frequency wave electromagnetic fields in vacuum are excited by a vortex electric current that is induced at the plasma boundary by the ponderomotive force of the laser pulse. The spectral, angular, and energy parameters of the low-frequency radiation, as well as the spatiotemporal structure of the emitted waves, are investigated. It is shown that for typical parameters of present-day laser plasma experiments, the power of terahertz radiation can amount to tens of megawatts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗