Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reflector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Ground-based testing of Precision Segmented Reflectors - PSR in the ground test environment

Recent PSR test experiences including panel surface error measurements and a truss beam experiment are covered. Principal environmental concerns, such as one-g condition, ambient microseismic environment, acoustic environment and thermal environment for the PSR testbed are analyzed. Results of the analysis and their implications for ground-based testing of large precision segmented optical systems are presented.

Satter, C. M.↗

Analyzing Large Reflector Antenna Structures

Iterative Design of Antenna Structures (IDEAS) computer program performs finite-element analysis and optimization of design, with special features for analysis and design of microwave antennas and associated structural components. Primary feature to perform root-mean-square-best-fitting path-length-error and boresight-pointing-error analyses for Cassegrain microwave antenna structure loaded by gravity, wind, or other environmental effects. Flexible and easy to use. Written in ATHENA FORTRAN and ASSEMBLER.

Levy, Roy↗

The electrical conductivities of the DSS-13 beam-waveguide antenna shroud material and other antenna reflector surface materials

A significant amount of noise temperature can potentially be generated by currently unknown dissipative losses in the beam waveguide (BWG) shroud. The amount of noise temperature contribution from this source is currently being studied. In conjunction with this study, electrical conductivity measurements were made on samples of the DSS-13 BWG shroud material at 8.420 GHz. The effective conductivities of unpainted and painted samples of the BWG shroud were measured to be 0.01 x 10(exp 7) and 0.0036 x 10(exp 7) mhos/m, respectively. This value may be compared with 5.66 x 10(exp 7) mhos/m for high conductivity copper.

Otoshi, T. Y.↗

High frequency scattering from trihedral corner reflectors and other benchmark targets - SBR versus experiment

A general method for calculating the radar cross section (RCS) from a three-dimensional target is described. The target is first constructed by using a solid-geometry-modeling computer-aided design (CAD) package. Following the shooting and bouncing ray (SBR) method, a very dense grid of rays is launched from the incident direction toward the target. Each ray is traced according to the geometrical optics theory including the effect of ray tube divergence, polarization, and material reflection coefficient. At the point where the ray exits the target, a physical optics-type integration is performed to obtain the scattered far fields. This method is tested using several simple examples involving interaction among plates, cylinders, and spheres. The theoretical results are generally in good agreement with measured data.

Baldauf, John↗

Optimal actuator placement on an active reflector using a modified simulated annealing technique

The development of a lightweight actuation system for maintaining the surface accuracy of a composite honeycomb panel using piezoelectric actuators is discussed. A modified simulated annealing technique is used to optimize the problem with both combinatorial and continuous criteria and with inequality constraints. Near optimal solutions for the location of the actuators, using combinatorial optimization, and for the required actuator forces, employing continuous optimization, are sought by means of the modified simulated annealing technique. The actuator locations are determined by first seeking a near optimum solution using the modified simulated annealing technique. The final actuator configuration consists of an arrangement wherein the piezoelectric actuators are placed along six radial lines. Numerical results showing the achievable surface correction by means of this configuration are presented.

Kuo, Chin-Po↗

Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

Agnew, Donald L.↗

Core design for use with precision composite reflectors

A uniformly flexible core, and method for manufacturing the same, is disclosed for use between the face plates of a sandwich structure. The core is made of a plurality of thin corrugated strips, the corrugations being defined by a plurality of peaks and valleys connected to one another by a plurality of diagonal risers. The corrugated strips are orthogonally criss-crossed to form the core. The core is particularly suitable for use with high accuracy spherically curved sandwich structures because undesirable stresses in the curved face plates are minimized due to the uniform flexibility characteristics of the core in both the X and Y directions. The core is self venting because of the open geometry of the corrugations. The core can be made from any suitable composite, metal, or polymer. Thermal expansion problems in sandwich structures may be minimized by making the core from the same composite materials that are selected in the manufacture of the curved face plates because of their low coefficients of thermal expansion. Where the strips are made of a composite material, the core may be constructed by first cutting an already cured corrugated sheet into a plurality of corrugated strips and then secondarily bonding the strips to one another or, alternatively, by lying a plurality of uncured strips orthogonally over one another in a suitable jig and then curing and bonding the entire plurality of strips to one another in a single operation.

Porter, Christopher C.↗

Integrated multidisciplinary analysis of segmented reflector telescopes

The present multidisciplinary telescope-analysis approach, which encompasses thermal, structural, control and optical considerations, is illustrated for the case of an IR telescope in LEO; attention is given to end-to-end evaluations of the effects of mechanical disturbances and thermal gradients in measures of optical performance. Both geometric ray-tracing and surface-to-surface diffraction approximations are used in the telescope's optical model. Also noted is the role played by NASA-JPL's Integrated Modeling of Advanced Optical Systems computation tool, in view of numerical samples.

Briggs, Hugh C.↗

Development and testing of lightweight composite reflector panels

Several years ago the Jet Propulsion Laboratory embarked upon a program to develop advanced polymer composite mirror elements as enabling technology for orbiting far IR/submillimeter telescopes. Structural composite mirrors have the advantages of high specific stiffness, good thermal stability and low cost that beneficially affect the entire telescope design. The goal of this panel development program is to design and fabricate prototype mirror panels: up to one meter in size with a surface precision and orbital thermal performance of a few microns, to achieve real densities close to 5 kg/sq m and to demonstrate the thermally stable performance of these panels experimentally. Studies leading to current mirror design are summarized. The precision and thermal performance of the mirror panels were tested in a dedicated test facility. Data showing panel performance are presented. Finally, the test results are compared to the analytically predicted panel performance.

Helms, R. G.↗

Optical figure testing of prototype mirrors for JPL's Precision Segmented Reflector (PSR) program

JPL's PSR program is developing enabling technologies for large space telescopes employing segmented optics, and in particular, lightweight, thermally stable mirrors for telescopes operating at sub-mm wavelengths. JPL's vacuum cryointerferometric optical test facility includes a computer-controlled phase shifting interferometer operating at 10.59 microns and laser metrology for measurement of piston and absolute radius of curvature. The optical metrology has been integrated with a large vacuum chamber including a liquid nitrogen shroud capable of radiatively cooling 1.5 meter aperture mirrors down to 150 K. The facility is now being used to characterize prototype mirrors in both their room-temperature 'as-replicated' condition, and under orbital temperature conditions. The performance and limitations of the optical metrology hardware and software components are noted. Representative test results on prototype one meter-class composite mirrors being developed for PSR and related ground-based programs are also presented.

Hochberg, Eric B.↗

Microwave feed systems for NASA's beam-waveguide reflector antennas

The major features of a beam waveguide (BWG) antenna and the variety of feed system configurations that can be used with this type of antenna are described. The first BWG antenna built by NASA (DSS 13), and its microwave feed systems and their major components, such as the low noise amplifiers, passive microwave components, and the frequency selective mirrors used for multiple frequency operation or diplexing purpose, are discussed.

Manshadi, F.↗

Scattering From A Thick Dichroic Microwave Reflector

Thick Frequency Selective Surface with Rectangular Apertures, TFSSRA, computer program developed to calculate scattering parameters of thick frequency-selective surface with rectangular apertures on skew grid at oblique angle of incidence. Integral equation transformed into matrix equation, which is then solved. Written in FORTRAN 77 with single precision.

Chen, Jacqueline C.↗

Using lunar sounder imagery to distinguish surface from subsurface reflectors in lunar highlands areas

We have developed a method using the Apollo 17 Lunar Sounder imagery data which appears capable of filtering out off-nadir surface noise from highland area profiles, so that subsurface features may now be detected in highland areas as well as mare areas. Previously, this had been impossible because the rough topography in the highland areas created noise in the profiles which could not be distinguished from subsurface echoes. The new method is an image processing procedure involving the computerized selection of pixels which represent intermediate echo intensity values, then manually removing those pixels from the profile. Using this technique, a subsurface feature with a horizontal extent of about 150 km, at a calculated depth of approximately 3 km, has been detected beneath the crater Riccioli in the highlands near Oceanus Procellarum. This result shows that the ALSE data contain much useful information that remains to be extracted and used.

Cooper, Bonnie L.↗