Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Relative Navigation for Formation Flying of Spacecraft

This paper presents a robust and efficient approach for relative navigation and attitude estimation of spacecraft flying in formation. This approach uses measurements from a new optical sensor that provides a line of sight vector from the master spacecraft to the secondary satellite. The overall system provides a novel, reliable, and autonomous relative navigation and attitude determination system, employing relatively simple electronic circuits with modest digital signal processing requirements and is fully independent of any external systems. Experimental calibration results are presented, which are used to achieve accurate line of sight measurements. State estimation for formation flying is achieved through an optimal observer design. Also, because the rotational and translational motions are coupled through the observation vectors, three approaches are suggested to separate both signals just for stability analysis. Simulation and experimental results indicate that the combined sensor/estimator approach provides accurate relative position and attitude estimates.

Alonso, Roberto↗

Scientific-Technical and Business Careers Training Grant

The 1996 renewal of the NGT2-1001 grant included three objectives and expected outcomes. The information highlights the results and progress to address the grant objectives and outcomes for the time period of July 1, 2000 through June 30, 2001. Objective Number One indicated that the internship staff would annually recruit and place at least 90 community college students in internship positions related to their college majors. Internship enrollments for the summer, fall, winter and spring quarters of 2000-2001 show an average enrollment of 121 students per quarter. This number includes (13) interns sponsored by Ames contractors.

Conway, Mary P.↗

A Non-Linear Approach to Spacecraft Formation Control in the Vicinity of a Collinear Libration Point

An expanding interest in mission design strategies that exploit libration point regions demands the continued development of enhanced, efficient, control algorithms for station-keeping and formation maintenance. This paper discusses the development of a non-linear, formation maintenance, control algorithm for trajectories in the vicinity of a libration point. However, the formulation holds for any trajectory governed by the equations of motion for the restricted three body problem. The control law guarantees exponential convergence, based on a Lyaponov analysis. FreeFlyer and MATLAB provide the simulation environment for controller performance evaluation. The simulation, modeled after the MAXIM Pathfinder mission, maintains the relative position of a "follower" spacecraft with respect to a "leader" spacecraft, stationed near the L2 libration point in the Sun-Earth system. Evaluation metrics are fuel usage and tracking accuracy.

Luquette, Richard J.↗

Effects of Body Orientation and Retinal Image Pitch on the Perception of Gravity-Referenced Eye Level (GREL)

It has been asserted that the pitch orientation of a visual array and of an observer's body jointly determine the perception of GREL. The current study formally tests this assertion over an extended range with multiple combinations of visual and body pitch orientations. Ten subjects were individually secured in a Circolectric bed surrounded by a room (pitchroom) with walls that could be pitched at various angles with respect to gravity. The bed and the walls of the room were independently adjusted to each of five positions relative to gravitational vertical: -15, -7.5, 0, +7.5, and +15 degrees, yielding 25 combinations of body x room pitch angles, and retinal image pitch (RIP) conditions ranging from -30 to +30 degrees. Each subject set a target to apparent GREL while viewing it against a background of two electroluminescent strips on the outer edges of the far wall of the room. As determined by ANOVA, the orientation of the room, and its interaction with that of the observer, significantly altered GREL (p less than 0.01). Regression analysis showed that GREL was best described as a linear summation of the weighted independent contributions from a body-referenced mechanism (B) and a visual mechanism given by the orientation of the background array on the retina (RIP). The equation for this relationship is: GREL = .74 (B) +.64 (RIP) - 1.42; r-squared = .994.

Cohen, Malcolm M.↗

Apse-Alignment of the Uranian Rings

An explanation of the dynamical mechanism for apse-alignment of the eccentric Uranian rings is necessary before observations can be used to determine properties such as ring masses, particle sizes, and elasticities. The leading model relies on the ring self-gravity to accomplish this task, yet it yields equilibrium masses which are not in accord with Voyager radio measurements. We explore possible solutions such that the self-gravity and the collisional terms are both involved in the process of apse-alignment. We consider limits that correspond to a hot and a cold ring, and show that pressure terms may play a significant role in the equilibrium conditions for the narrow Uranian rings. In the cold ring case, where the scale height of the ring near periapse is comparable to the ring particle size, we introduce a new pressure correction pertaining to a region of the ring where the particles are locked in their relative positions and jammed against their neighbors, and the velocity dispersion is so low that the collisions are nearly elastic. In this case, we find a solution such that the ring self-gravity maintains apse-alignment against both differential precession (m = 1 mode) and the fluid pressure. We apply this model to the Uranian alpha ring, and show that, compared to the previous self-gravity model, the mass estimate for this ring increases by an order of magnitude. In the case of a hot ring, where the scale height can reach a value as much as fifty times larger than a particle size, we find velocity dispersion profiles that result in pressure forces which act in such a way as to alter the ring equilibrium conditions, again leading to a ring mass increase of an order of magnitude; however, such a velocity dispersion profile would require a different mechanism than is currently envisioned for establishing heating/cooling balance in a finite-sized, inelastic particle ring. Finally, we introduce an important correction to the model of Chiang and Goldreich.

Mosqueira, I.↗

Molecular Dynamics Simulation of a Multi-Walled Carbon Nanotube Based Gear

We used molecular dynamics to investigate the properties of a multi-walled carbon nanotube based gear. Previous work computationally suggested that molecular gears fashioned from (14,0) single-walled carbon nanotubes operate well at 50-100 gigahertz. The gears were formed from nanotubes with teeth added via a benzyne reaction known to occur with C60. A modified, parallelized version of Brenner's potential was used to model interatomic forces within each molecule. A Leonard-Jones 6-12 potential was used for forces between molecules. The gear in this study was based on the smallest multi-walled nanotube supported by some experimental evidence. Each gear was a (52,0) nanotube surrounding a (37,10) nanotube with approximate 20.4 and 16,8 A radii respectively. These sizes were chosen to be consistent with inter-tube spacing observed by and were slightly larger than graphite inter-layer spacings. The benzyne teeth were attached via 2+4 cycloaddition to exterior of the (52,0) tube. 2+4 bonds were used rather than the 2+2 bonds observed by Hoke since 2+4 bonds are preferred by naphthalene and quantum calculations by Jaffe suggest that 2+4 bonds are preferred on carbon nanotubes of sufficient diameter. One gear was 'powered' by forcing the atoms near the end of the outside buckytube to rotate to simulate a motor. A second gear was allowed to rotate by keeping the atoms near the end of its outside buckytube on a cylinder. The ends of both gears were constrained to stay in an approximately constant position relative to each other, simulating a casing, to insure that the gear teeth meshed. The stiff meshing aromatic gear teeth transferred angular momentum from the powered gear to the driven gear. The simulation was performed in a vacuum and with a software thermostat. Preliminary results suggest that the powered gear had trouble turning the driven gear without slip. The larger radius and greater mass of these gears relative to the (14,0) gears previously studied requires a smaller rotation rate and multiple rows of teeth to avoid excessive force on the gear teeth resulting, in slip and failure of the driven gear to turn. We hope that studies such as these will eventually lead to synthesis of components that can be assembled into atomically precise fullerene machines. These machines, in turn, may someday be used in machine-phase fullerene materials with remarkable properties.

Han, Jie↗

Cross-Cultural Barriers to Effective Communication in Aviation

Communication is essential to safe flight, as evidenced by several accidents in which crew communicates was found to have contributed to the accidents. This chapter documents the essential role of explicit efficient communication to flight safety with a global context. It addresses communication between flight crews and air traffic controllers in regions a the world where pilots and controllers speak different native languages, as well as cases in which crew members within the flight deck represent different native languages and cultures. It also addresses problems associated with "exporting" crew resource management training programs to parts of the world which values and norms differ from those of the United States, where these programs were initially developed. This chapter is organized around several central questions: (1) What are various kinds of communication failures and what are their consequences; (2) What are the causes of communication failure; (3) What are features of effective crew communication; (4) What can be done to enhance communication success? To explore a wider range of communication failures than available from accident reports, we examined a set of incident reports from the Aviation Safety Reporting System. These could be classified into three major categories: those in which language actually interfered with transmission of a message; those in which transmission was adequate but the context was not expressed unambiguously and thus the message received was not the same as the message intended; and those in which the message was received as intended, but was not adequately understood or acted upon, mainly because of cultural factors. The consequences of failed communication can be flight errors (such as when a clearance is not received correctly), loss of situation awareness, or failure of crew members (or ATC and pilots) to build a shared understanding of a situation. Causes of misunderstanding can be traced to a number of sources, often grounded in faulty assumptions held by one or both parties to a conversation. Speakers and listeners often experience "illusionary understanding" in which they think they understand each other, but in fact do not. While this problem can exist within a single culture, it is much more serious across cultures. Training in effective explicit communication is a component of Crew Resource Management training programs developed in the U.S. These programs are being adopted by airlines around the world, with varying degrees of success. The level of success in part depends on how similar the conversational and social styles of those cultures are to those of the U.S. A factor that influences conversational style is a culture's relative positioned on two major dimensions that distinguish national cultural groups: individualism vs. collectivism and degree of power distance. The chapter concludes with a discussion of techniques for overcoming the various classes of communication failures and for effectively adapting training programs to fit the values and norms of cultures around the globe.

Fischer, U.↗

The Effects of Aviation Weather Information Systems on General Aviation Weather Information Systems on General Pilots' Workload

My work at NASA Langley has focused around Aviation Weather Information CAWING displays. The majority of my time at LYRIC has been spent on the Workload and Relative Position (WaRP) Study. The goal of this project is to determine how an AWIN display at various positions within the cockpit affects pilot performance and workload. The project is being conducted in Languages Cessna 206H research aircraft. During the past year the design of the experiment was finalized and approved. Despite facing several delays the data collection was completed in early February. Alter the completion of the data collection an extensive data entry task began. This required recording air speed, altitude, course heading, bank angle, and vertical speed information from videos of the primary flight displays. This data was then used to determine root mean square error (RMSE) for each experimental condition. In addition to the performance data (RMSE) taken from flight path deviation, the study also collected data on pilot;s accuracy in reporting weather information, and a subjective rating of workload from the pilot. The data for this experiment is currently being analyzed. Overall the current experiment should help to determine potential costs and benefits associated with AWIN displays. The data will be used to determine if a private pilot can safely fly a general aviation aircraft while operating a weather display. Clearly a display that adds to the pilot#s already heavy workload represents a potential problem. The study will compare the use of an AWIN display to conventional means of acquiring weather data. The placement of the display within the cockpit (i.e., either on the yoke, kneeboard, or panel) will be also compared in terms of workload, performance, and pilot preference.

Scerbo, Mark↗

Satellite Tracking System

Researchers at the Center for Aerospace Sciences of the University of North Dakota (UND), Grand Forks, used three NASA Computer programs (SANDTRACKS, ODG, NORAD) to develop a Satellite Tracking System for real time utilization of TIROS weather/environment satellite information. SANDTRACKS computes the satellite's position relative to the Earth. ODG allows plotting a view of Earth as seen by the satellite. NORAD computes sight direction, visibility times and maximum elevation angle during each orbit. With the system, UND's Earth System Science Institute will be able to routinely monitor agricultural and environmental conditions of the Northern Plains.

Source record↗

Flight Test Techniques Used to Evaluate Performance Benefits During Formation Flight

The Autonomous Formation Flight research project has been implemented at the NASA Dryden Flight Research Center to demonstrate the benefits of formation flight and develop advanced technologies to facilitate exploiting these benefits. Two F/A-18 aircraft have been modified to precisely control and monitor relative position, and to determine performance of the trailing airplane. Flight test maneuvers and analysis techniques have been developed to determine the performance advantages, including drag and fuel flow reductions and improvements in range factor. By flying the trailing airplane through a matrix of lateral, longitudinal, and vertical offset positions, a detailed map of the performance benefits has been obtained at two flight conditions. Significant performance benefits have been obtained during this flight test phase. Drag reductions of more than 20 percent and fuel flow reductions of more than 18 percent have been measured at flight conditions of Mach 0.56 and an altitude of 25,000 ft. The results show favorable agreement with published theory and generic predictions. An F/A-18 long-range cruise mission at Mach 0.8 and an altitude of 40,000 ft has been simulated in the optimum formation position and has demonstrated a 14-percent fuel reduction when compared with a controlled chase airplane of similar configuration.

Ray, Ronald J.↗

Simulation and Correction of Triana-Viewed Earth Radiation Budget with ERBE/ISCCP Data

This paper describes the simulation of the earth radiation budget (ERB) as viewed by Triana and the development of correction models for converting Trianaviewed radiances into a complete ERB. A full range of Triana views and global radiation fields are simulated using a combination of datasets from ERBE (Earth Radiation Budget Experiment) and ISCCP (International Satellite Cloud Climatology Project) and analyzed with a set of empirical correction factors specific to the Triana views. The results show that the accuracy of global correction factors to estimate ERB from Triana radiances is a function of the Triana position relative to the Lagrange-1 (L1) or the Sun location. Spectral analysis of the global correction factor indicates that both shortwave (SW; 0.2 - 5.0 microns) and longwave (LW; 5 -50 microns) parameters undergo seasonal and diurnal cycles that dominate the periodic fluctuations. The diurnal cycle, especially its amplitude, is also strongly dependent on the seasonal cycle. Based on these results, models are developed to correct the radiances for unviewed areas and anisotropic emission and reflection. A preliminary assessment indicates that these correction models can be applied to Triana radiances to produce the most accurate global ERB to date.

Huang, Jian-Ping↗

Tactical Maneuvering Using Immunized Sequence Selection

This paper describes a tactical maneuvering system that uses an artificial immune system based approach for selecting maneuver sequences. This approach combines the problem solving abilities of genetic algorithms with the memory retention characteristics of an immune system. Of significant importance here is the fact that the tactical maneuvering system can make time-critical decisions to accomplish near-term objectives within a dynamic environment. These objectives can be received from a human operator, autonomous executive, or various flight planning specialists. Simulation tests were performed using a high performance military aircraft model. Results demonstrate the potential of using immunized sequence selection in order to accomplish tactical maneuvering objectives ranging from flying to a location while avoiding unforeseen obstacles, to performing relative positioning in support of air combat maneuvering.

Kaneshige, John↗

Laser-Based Relative Navigation and Guidance for Space Shuttle Proximity Operations

American manned spacecraft have used visual piloting techniques in the terminal phase of randezvous during the Gemini, Apollo, Skylab, and Space Shuttle programs. In the last several years, space- shuttle astronauts have used the Rendezvous and Proximity Operations Program (RPOP), running; on a laptop computer, as a guidance and navigation aid during proximity operations. By processing measurements to the target satellite taken by a laser sensor, RPOP provides the shuttle crew with a more accurate relative position and velocity than from any other source. The inclusion of guidance algorithms allows RPOP to determine delta-velocities to fly very efficient, repeatable trajectories. This paper will focus on the guidance and navigation algorithms in RPOP, as well as results from simulation and flight. Although developed for shuttle proximity operations, the RPOP algorithms have potential applicability to an automated vehicle.

Laser sensors↗

A Gravity Analysis of the Subsurface Structure of the Utopia Impact Basin

The large, shallow, circular depression in Utopia Planitia has been identified as a huge impact basin, based on both geological evidence and detailed analysis of MOLA topography. Its diameter (approximately 3000 km) is equivalent to that of the Hellas basin, as is its inferred age (early Noachian). However, there the similarity ends. Their appearance, both surficially and geophysically, are virtually polar opposites. Whereas Hellas is extremely deep with rough terrain and large slopes, high-precision MOLA measurements were required to unambiguously define the smooth, shallow, almost imperceptible bowl of the Utopia basin. Conversely, Utopia displays one of the largest (non-Tharsis-related) positive geoid anomalies on Mars, in contrast to a more subdued negative anomaly over Hellas. As these two features presumably formed roughly contemporaneously by similar mechanisms, it is reasonable to assume that they were originally quite similar, and that their differences are due largely to different paths of subsequent modification. The obvious source for these differences is in their elevations: Hellas is located in the southern highlands at a rim elevation of about 3km, whereas Utopia is in the lowlying northern plains, at an average elevation of 4 km. Thus Utopia has been in an especially gravitationally favorable position to be subjected to infilling, for example, by lava flows, sedimentation, or water. In fact, its floor was almost certainly the lowest point on the planet at one time, and it would have been the termination point for down-slope drainage from over two-thirds of Mars. Thus the nature of the material filling this basin has strong connections to the sedimentary and/or volcanic processes acting on Mars in the Noachian and Early Hesperian periods. In particular, it may be able to shed some light on amount and persistence of water on early Mars in general and in the Utopia basin in particular. In this study I will use the inferred early correspondence between Hellas and Utopia to investigate Utopia's subsurface structure.

Barnerdt, W. B.↗

Comparison of Artificial Compressibility Methods

Various artificial compressibility methods for calculating three-dimensional, steady and unsteady, laminar and turbulent, incompressible Navier-Stokes equations are compared in this work. Each method is described in detail along with appropriate physical and numerical boundary conditions. Analysis of well-posedness and numerical solutions to test problems for each method are provided. A comparison based on convergence behavior, accuracy, stability and robustness is used to establish the relative positive and negative characteristics of each method.

Kiris, Cetin↗

Formation Control for the Maxim Mission.

Over the next twenty years, a wave of change is occurring in the spacebased scientific remote sensing community. While the fundamental limits in the spatial and angular resolution achievable in spacecraft have been reached, based on today's technology, an expansive new technology base has appeared over the past decade in the area of Distributed Space Systems (DSS). A key subset of the DSS technology area is that which covers precision formation flying of space vehicles. Through precision formation flying, the baselines, previously defined by the largest monolithic structure which could fit in the largest launch vehicle fairing, are now virtually unlimited. Several missions including the Micro-Arcsecond X-ray Imaging Mission (MAXIM), and the Stellar Imager will drive the formation flying challenges to achieve unprecedented baselines for high resolution, extended-scene, interferometry in the ultraviolet and X-ray regimes. This paper focuses on establishing the feasibility for the formation control of the MAXIM mission. The Stellar Imager mission requirements are on the same order of those for MAXIM. This paper specifically addresses: (1) high-level science requirements for these missions and how they evolve into engineering requirements; (2) the formation control architecture devised for such missions; (3) the design of the formation control laws to maintain very high precision relative positions; and (4) the levels of fuel usage required in the duration of these missions. Specific preliminary results are presented for two spacecraft within the MAXIM mission.

Luquette, Richard J.↗

Neural substrates linking balance control and anxiety

This communication provides an update of our understanding of the neurological bases for the close association between balance control and anxiety. New data suggest that a vestibulo-recipient region of the parabrachial nucleus (PBN) contains cells that respond to body rotation and position relative to gravity. The PBN, with its reciprocal relationships with the extended central amygdaloid nucleus, infralimbic cortex, and hypothalamus, appears to be an important node in a primary network that processes convergent vestibular, somatic, and visceral information processing to mediate avoidance conditioning, anxiety, and conditioned fear responses. Noradrenergic and serotonergic projections to the vestibular nuclei also have parallel connections with anxiety pathways. The coeruleo-vestibular pathway originates in caudal locus coeruleus (LC) and provides regionally specialized noradrenergic input to the vestibular nuclei, which likely mediate effects of alerting and vigilance on the sensitivity of vestibulo-motor circuits. Both serotonergic and nonserotonergic pathways from the dorsal raphe nucleus and the nucleus raphe obscurus also project differentially to the vestibular nuclei, and 5-HT(2A) receptors are expressed in amygdaloid and cortical targets of the PBN. It is proposed that the dorsal raphe nucleus pathway contributes to both (a) a tradeoff between motor and sensory (information gathering) aspects of responses to self-motion and (b) a calibration of the sensitivity of affective responses to aversive aspects of motion. This updated neurologic model continues to be a synthetic schema for investigating the neurological and neurochemical bases for comorbidity of balance disorders and anxiety disorders.

Review↗

Effect of a longitudinally applied voltage upon the growth of Zea mays seedlings

The electrical parameters that affect young seedling growth were investigated. Voltages ranging from 5 to 40 volts were applied longitudinally along the mesocotyl region of 4-day old Zea mays L. (cv Silver Queen) seedlings for periods of 3 or 4 hours. It was determined that: (a) making the tips of the seedlings electrically positive relative to the base strongly inhibited shoot growth at 5 volts, whereas the reverse polarity had no effect; (b) at higher voltages, making the tip of the seedlings negative caused less growth inhibition than the reverse polarity at each voltage level; (c) the higher the applied voltage the greater the degree of inhibition; and, (d) the more growth inhibition experienced by the plants the poorer, and slower, their recovery. Previous observations of a relationship between the amount of free indole-3-acetic acid in the mesocotyl cortex and the growth rate of the mesocotyl and of gravitropism-induced movement of labeled indole-3-acetic acid from the seed to the shoot lead to the prediction of a voltage-dependent gating of the movement of indole-3-acetic acid from the stele to the cortex. This provided the basis for attempting to alter the growth rate of seedlings by means of an applied voltage.

NASA Program Space Biology↗