Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reproducibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Development and application of a uranium mononitride (UN) potential: Thermomechanical properties and Xe diffusion

We report that atomic-scale modeling of thermophysical and defect properties of uranium mononitride (UN) plays an important role in establishing a better understanding and improved models of UN fuel performance. Having an accurate interatomic potential is crucial for generating reliable data at finite temperatures using molecular dynamic simulations. We report a new interatomic potential for UN, based on a combination of many-body and pairwise interactions, a simple form that we later show could be easily adapted to include Xe-U and Xe-N interactions, i.e., generating a U-N-Xe interatomic potential. The potential was fitted to experimental thermal expansion and single crystal elastic constants, as well as Frenkel, Schottky, anti-Schottky, and antisite pair reaction energies from density functional theory (DFT) calculations. Using the potential, we successfully reproduced experimental lattice parameters, thermal expansion, single crystal elastic constants, and temperature dependent heat capacity. The potential also performs reasonably well in reproducing the energy of the aforementioned stoichiometric defect reactions and defect migration barriers calculated using DFT. However, the potential underestimates the energy difference between the tetrahedral and dumbbell uranium interstitials, and a more complex potential form might be needed to overcome this issue. The potential was also used to predict UN single crystal elastic constants and elastic properties at different temperatures, showing that UN becomes softer and more compressible with increasing temperature. We also compare our potential against literature data from previous empirical potentials, demonstrating similar or better behavior depending on the property of interest. To enable the simulation of Xe in UN a Buckingham potential has been fitted to DFT-derived Xe incorporation energies. The potential was then used to determine the activation energy for Xe diffusion due to various Xe-containing defects, with {XeU : VU} exhibiting the lowest activation energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Composition and Oxidation States on the Structures of Chromium-Containing Sodium Silicate Glasses: Molecular Dynamics Simulations using Machine Learning Interatomic Potentials

Chromium represents a significant challenge for the vitrification of high-level nuclear waste into silicate and borosilicate glasses due to its low solubility and variable oxidation states, which can limit the waste loading due to promotion of crystallization or phase separation during processing. In this study, we modeled chromium containing silicate glasses using molecular dynamics simulations with three machine learning interatomic potentials (MLIPs), MACE, CHGNet, and PFP were employed, to gain insights on glass composition and oxidation states on the structures of these glasses. One of the goals is to evaluate their ability of these MLIPs to accurately represent the general structure of silicate glasses and chromium local environments as a function of chromium oxidation states. Density Functional Theory (DFT) based calculations and experimental data such as neutron structure factors were used to validate the structural models. It was found that the foundation models of all three MLIPs are able to reproduce general structural features of the sodium silicate glass structure consistent with experimental and DFT data, but only CHGNet and PFP can accurately capture the oxidation states and local environment of chromium: tetrahedral for Cr6+ and octahedral for Cr3+. Furthermore, we studied the effect of varying Cr3+/ Cr6+ (Cr3+/Crtotal) ratio and total chromium content using PFP. Our results show that Cr6+ enhances network polymerization by reducing non-bridging oxygens through Na? charge compensation required due to the formation of chromate (CrO42-) species, while Cr³? acts as a network modifier that disrupts connectivity. System size effects on the structural characteristics and chromium environments were also tested using the PFP potential. This work highlights the importance of careful validation on the precision, transferability, and potential of MLIPs for modeling glasses containing transition metal elements that can exist in multiple oxidation states. It is also encouraging to see the foundational models are all three MLFFs are able to reproduce the basic sodium silicate glass structures, while suggesting additional training or refining is needed to improve the description of more complex systems containing transition metals.

Puga, Christina L.↗

Synapse: Synthetic application profiler and emulator

Abstract Motivated by the need to emulate workload execution characteristics on high- performance and distributed heterogeneous resources, we introduce Synapse. Synapse is used as a proxy application (or "representative application") for real workloads, with the advantage that it can be tuned in different ways and dimensions, and also at levels of granularity that are not possible with real applications. Synapse has a platform-independent application profiler, and has the ability to emulate profiled workloads on a variety of resources. Experiments show that the automated profiling performed using Synapse captures an application's characteristics with high fidelity. The emulation of an application using Synapse can reproduce the application's execution behavior in the original run- time environment, and can also reproduce those behaviors on different run-time environments.

97 MATHEMATICS AND COMPUTING↗

Evaluation of electronic state of Cs-adsorbed clay minerals by NEXAFS analysis using DFT calculations

In this work, a combined analytical method of NEXAFS measurement and DFT-calculation was employed for the evaluation of Cs states in clay minerals. The measured Cs M 4,5 NEXAFS spectra of Cs halides were analyzed using the DFT-calculations in order to establish the analytical methods. The NEXAFS spectra of the Cs halides were well reproduced by incorporating the core-hole strength. The Cs M 4,5 NEXAFS spectrum of the clay minerals was well reproduced by the DFT-calculations including the major transitions and tail structures with the established method. Further evaluation of this spectrum by charge density analysis suggested that these major transitions and the tail structures likely reflect the bonding state and the local environment around the Cs atoms. Comparison of electronic states of Cs in the clay mineral with those in the Cs halides by DFT-calculations has shown that the interaction between Cs and the nearest-neighbor atom is largest in the clay mineral, which differs from those of Cs halides. This happened due to the energy level of Cs-5s and 5p, which was closer to that of O-2s and 2p than the s and p orbitals of other alkali metal and alkali earth metal elements.

36 MATERIALS SCIENCE↗

Humidity effects in Fe{sub 16}N{sub 2} fine powder preparation by low-temperature nitridation

Low-temperature nitridation has been reported to produce ferromagnetic {alpha}''-Fe{sub 16}N{sub 2} by ammonia nitridation of {alpha}-Fe fine powder, which was obtained from the reduction of vapor-grown {gamma}-Fe{sub 2}O{sub 3}. The effects of humidity during this preparation were investigated in the present study. {alpha}''-Fe{sub 16}N{sub 2} was inconsistently obtained, and at low yield, from Fe{sub 3}O{sub 4} fine powder (MT-40) prepared from aqueous solution. Reducing the adsorbed water content in the iron oxide starting powder resulted in improved reproducibility of the {alpha}''-Fe{sub 16}N{sub 2} yield of the nitridation. The use of a smaller-diameter reaction tube, less than 25 mm in diameter, enabled more reproducible preparation from vapor-grown {gamma}-Fe{sub 2}O{sub 3} powder (CI-30). The reaction yield was further improved by using high-quality ammonia with a water content of {<=}0.05 ppm. Minimizing the humidity made it possible to obtain a fine powder with a high {alpha}''-Fe{sub 16}N{sub 2} content. Enhancement of the magnetization to 210 emu g{sup -1} at room temperature was observed from a nitrided mixture of {alpha}''-Fe{sub 16}N{sub 2} with residual {alpha}-Fe, compared to 199 emu g{sup -1} for an {alpha}-Fe fine powder reduced from {gamma}-Fe{sub 2}O{sub 3}. However, excess nitrogen and residual oxygen in the nitrided products reduced the magnetization below the value of {alpha}-Fe powder after nitridation. The magnetization was enhanced in nitrided products with a nitrogen content slightly below the stoichiometric amount for {alpha}''-Fe{sub 16}N{sub 2}. - Graphical abstract: Humidity should be as low as possible to obtain a fine powder with a high {alpha}{sup -}Fe{sub 16}N{sub 2} content. An enhancement of magnetization to 210 emu g{sup -1} at room temperature was observed from a nitrided mixture of {alpha}{sup -}Fe{sub 16}N{sub 2} with residual {alpha}-Fe, compared to 199 emu g{sup -1} for an {alpha}-Fe fine powder reduced from {gamma}-Fe{sub 2}O{sub 3}.

36 MATERIALS SCIENCE↗

Na27Ru14O48: A New Mixed-valence Sodium Ruthenate with Magnetic Heptameric Plaquettes

Na{sub 27}Ru{sub 14}O{sub 48} has been synthesized in air at 700 C. The composition and crystal structure of the phase were determined by single crystal X-ray diffraction. The triclinic crystal structure contains isolated planar Ru{sub 7}O{sub 24} plaquettes made from seven edge-sharing RuO{sub 6} octahedra. The complex Na:Ru ratio is a result of tilting of the plaquettes to disrupt the packing of nominally hexagonal close packed planes made of Na ions and RuO{sub 6} octrahedra. Resistivity measurements show that the material is semiconducting with an activation energy of 0.53 eV. The observed magnetic moment of 3.11 {micro}{sub B} per Ru is lower than the expected spin only value, but is within the range seen in other compounds and is too large to indicate that the fundamental magnetic entities are the isolated Ru{sub 7}O{sub 24} plaquettes. Small, reproducible deviations in the Curie-Weiss behavior occur below 200 K and the onset of a broad magnetic transition is seen between 40 and 32 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, thermodynamic and optical properties of MgF{sub 2} studied from first-principles theory

A detailed theoretical study of structural, electronic, elastic, thermodynamic and optical properties of rutile type MgF{sub 2} has been carried out by means of first-principles Density Functional Theory (DFT) calculations using plane wave pseudo-potentials within the local density approximation and generalized-gradient approximation for the exchange and correlation functionals. The calculated ground state properties and elastic constants agree quite well with experimental values. From the calculated elastic constants we conclude that MgF{sub 2} is relatively hard when compared to other alkaline-earth fluorides and ductile in nature. The thermodynamic properties such as heat capacity, entropy, free energy, phonon density of states and Debye temperatures are calculated at various temperatures from the lattice dynamical data obtained through the quasi-harmonic Debye model. From free energy and entropy it is found that the system is thermodynamically stable up to 1200 K. The imaginary part of the calculated dielectric function {epsilon}{sub 2}({omega}) could reproduce the six prominent peaks which are observed in experiment. From the calculated {epsilon}({omega}), other optical properties such as refractive index, reflectivity and electron energy-loss spectrum are obtained up to the photon energy range of 30 eV. -- Graphical abstract: The calculated imaginary part {epsilon}{sub 2}({omega}) of the complex dielectric function {epsilon}({omega}) of MgF{sub 2} as a function of photon energy is shown. The calculated {epsilon}{sub 2}({omega}) could reproduce the major peaks observed in experiment. All the peaks observed are corresponds to interband transitions from 'p' states of Fluorine in valence band to the 's' states of Mg in conduction band. Display Omitted Research highlights: > Structural and bonding properties. > Optical properties. > Single and polycrystalline elastic properties. > Thermodynamic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A practical grinding-assisted dry synthesis of nanocrystalline NiMoO{sub 4} polymorphs for oxidative dehydrogenation of propane

A practical two-stage reactive grinding-assisted pathway waste-free and cost-effective for the synthesis of NiMoO{sub 4} has been successfully developed. It was demonstrated that proper design in synthetic strategy for grinding plays a crucial role in determining the ultimate polymorph of NiMoO{sub 4}. Specifically, direct grinding (DG) of MoO{sub 3} and NiO rendered {alpha}-NiMoO{sub 4} after annealing, whereas sequential grinding (SG) of the two independently pre-ground oxides followed by annealing generated {beta}-NiMoO{sub 4} solid solution. Characterizations in terms of Raman and X-ray diffraction suggest the creation of {beta}-NiMoO{sub 4} precursor in the latter alternative is the key aspect for the formation of {beta}-NiMoO{sub 4}. The DG-derived {alpha}-NiMoO{sub 4} tested by oxidative dehydrogenation of propane exhibited superior activity in contrast to its analog synthesized via conventional coprecipitation. It is suggested that the favorable chemical composition facilely obtained via grinding in contrast to that by coprecipitation was essential for achieving a more selective production of propylene. - Graphical Abstract: Grinding-assisted synthesis of NiMoO{sub 4} offers higher and more reproducible activities in contrast to coprecipitation for oxidative dehydrogenation of propane, and both {alpha}- and {beta}-NiMoO{sub 4} can be synthesized. Highlights: Black-Right-Pointing-Pointer NiMoO{sub 4} was prepared through grinding-assisted pathway. Black-Right-Pointing-Pointer Direct/sequential grinding rendered {alpha}-, {beta}-NiMoO{sub 4}, respectively. Black-Right-Pointing-Pointer Grinding-derived {alpha}-NiMoO{sub 4} showed high and reproducible activity for oxidative dehydrogenation of propane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex metal-rich boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68, y=1.06) with a new structure type containing B{sub 4} zigzag fragments: Synthesis, crystal chemistry and theoretical calculations

Polycrystalline samples and single crystals of the new complex boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68; y=1.06) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere and characterized by X-Ray diffraction as well as EDX measurements. The crystal structure was refined on the basis of single crystal data. The new phase, which represents a new structure type containing trans zigzag B{sub 4} fragments as well as isolated boron atoms crystallizes in the orthorhombic space group Pbam (Nr. 55) with the lattice parameters a=8.620(1) A, b=14.995(2) A and c=3.234(1) A. First-principles density functional theory calculations using the Vienna ab-initio simulation package (VASP) were performed on an appropriate structural model (using a supercell approach) and the experimental crystallographic data could be reproduced accurately. Based on this model, the density of states and crystal orbital Hamilton population (for bonding analysis) were calculated, using the linear muffin-tin orbital atomic sphere approximation (LMTO-ASA) method. According to these calculations, this metal-rich compound should be metallic, as expected. Furthermore, very strong boron-boron interactions are observed in the trans zigzag B{sub 4} fragment, which induce a clear differentiation of two types of metal-boron contacts with different strength. The observed three-dimensional metal-metal interaction is in good agreement with the predicted metallic behavior. - graphical abstract: The structure of Ti{sub 1.68(2)}Rh{sub 2.38(6)}Ir{sub 1.94(4)} B{sub 3}, a new structure type containing planar trans zigzag B{sub 4} units, is another example which illustrates the tendency of metal-rich borides to form B-B bonds with increasing boron content. Beside the B{sub 4} fragment it exhibits one-dimensional chains of titanium atoms and hold one-dimensional strings of face-sharing empty tetrahedral and square pyramidal clusters (see figure). Highlights: Black-Right-Pointing-Pointer Synthesis of a new metal-rich complex boride. Black-Right-Pointing-Pointer New structure type containing isolated boron and trans zigzag B{sub 4} units. Black-Right-Pointing-Pointer Crystallographic parameters and bond length well reproduced by theory. Black-Right-Pointing-Pointer Strong boron-boron and metal-boron interactions responsible for structural stability. Black-Right-Pointing-Pointer Three-dimensional metallic network responsible for metallic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of large sintered pellets of Sb-doped n-type Mg{sub 2}Si using a plasma activated sintering method

Sb is known to be the most stable n-type dopant in Mg{sub 2}Si, whereas the reproducibility and sintering scalability of Sb-doped Mg{sub 2}Si has proved to be difficult. We have developed a metallic binder for the Sb-doped Mg{sub 2}Si sintering process. A remarkable benefit of the binder is that it enables us to reproducibly fabricate large sintered Sb-doped Mg{sub 2}Si pellets up to 30 mm in diameter with no internal cracks. For binder contents of 3-7 wt%, the observed power factor and thermal conductivity were identical to that of conventional Sb-doped samples, while excess binder degraded the TE properties. The binder mixture also plays a part in increasing the yield in the production of TE legs, up to 82% for 5 wt% Ni incorporation, as well as improving the hardness of the sintered sample. Incorporation of 5 wt% Ni binder affected an increase in the ZT value up to 0.97. - Graphical abstract: The sample of 30 mm in diameter is fabricated by using a Ni binder. Highlights: Black-Right-Pointing-Pointer We have developed a metallic binder for the Sb-doped Mg{sub 2}Si sintering process. Black-Right-Pointing-Pointer Sb-doped Mg{sub 2}Si pellets up to 30 mm in diameter with no internal cracks. Black-Right-Pointing-Pointer Incorporation of 5 wt% Ni binder affected an increase in the ZT value up to 0.97.

36 MATERIALS SCIENCE↗

Lithium transition metal fluorophosphates (Li{sub 2}CoPO{sub 4}F and Li{sub 2}NiPO{sub 4}F) as cathode materials for lithium ion battery from atomistic simulation

Lithium transition metal fluorophosphates (Li{sub 2}MPO{sub 4}F, M: Co and Ni) have been investigated from atomistic simulation. In order to predict the characteristics of these materials as cathode materials for lithium ion batteries, structural property, defect chemistry, and Li{sup +} ion transportation property are characterized. The core–shell model with empirical force fields is employed to reproduce the unit-cell parameters of crystal structure, which are in good agreement with the experimental data. In addition, the formation energies of intrinsic defects (Frenkel and antisite) are determined by energetics calculation. From migration energy calculations, it is found that these flurophosphates have a 3D Li{sup +} ion diffusion network forecasting good Li{sup +} ion conducting performances. Accordingly, we expect that this study provides an atomic scale insight as cathode materials for lithium ion batteries. - Graphical abstract: Lithium transition metal fluorophosphates (Li{sub 2}CoPO{sub 4}F and Li{sub 2}NiPO{sub 4}F). Display Omitted - Highlights: • Lithium transition metal fluorophosphates (Li{sub 2}MPO{sub 4}F, M: Co and Ni) are investigated from classical atomistic simulation. • The unit-cell parameters from experimental studies are reproduced by the core–shell model. • Li{sup +} ion conducting Li{sub 2}MPO{sub 4}F has a 3D Li{sup +} ion diffusion network. • It is predicted that Li/Co or Li/Ni antisite defects are well-formed at a substantial concentration level.

36 MATERIALS SCIENCE↗

Local and average structure of Mn- and La-substituted BiFeO{sub 3}

The local and average structure of solid solutions of the multiferroic perovskite BiFeO{sub 3} is investigated by synchrotron X-ray diffraction (XRD) and electron density functional theory (DFT) calculations. The average experimental structure is determined by Rietveld refinement and the local structure by total scattering data analyzed in real space with the pair distribution function (PDF) method. With equal concentrations of La on the Bi site or Mn on the Fe site, La causes larger structural distortions than Mn. Structural models based on DFT relaxed geometry give an improved fit to experimental PDFs compared to models constrained by the space group symmetry. Berry phase calculations predict a higher ferroelectric polarization than the experimental literature values, reflecting that structural disorder is not captured in either average structure space group models or DFT calculations with artificial long range order imposed by periodic boundary conditions. Only by including point defects in a supercell, here Bi vacancies, can DFT calculations reproduce the literature results on the structure and ferroelectric polarization of Mn-substituted BiFeO{sub 3}. The combination of local and average structure sensitive experimental methods with DFT calculations is useful for illuminating the structure-property-composition relationships in complex functional oxides with local structural distortions. - Graphical abstract: The experimental and simulated partial pair distribution functions (PDF) for BiFeO{sub 3}, BiFe{sub 0.875}Mn{sub 0.125}O{sub 3}, BiFe{sub 0.75}Mn{sub 0.25}O{sub 3} and Bi{sub 0.9}La{sub 0.1}FeO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benefits of utilizing CellProfiler as a characterization tool for U–10Mo nuclear fuel

Automated image processing techniques have the potential to aid in the performance evaluation of nuclear fuels by eliminating judgment calls that may vary from person-to-person or sample-to-sample. Analysis of in-core fuel performance is required for design and safety evaluations related to almost every aspect of the nuclear fuel cycle. This study presents a methodology for assessing the quality of uranium–molybdenum fuel images and describes image analysis routines designed for the characterization of several important microstructural properties. The analyses are performed in CellProfiler, an open-source program designed to enable biologists without training in computer vision or programming to automatically extract cellular measurements from large image sets. The quality metric scores an image based on three parameters: the illumination gradient across the image, the overall focus of the image, and the fraction of the image that contains scratches. The metric presents the user with the ability to ‘pass’ or ‘fail’ an image based on a reproducible quality score. Passable images may then be characterized through a separate CellProfiler pipeline, which enlists a variety of common image analysis techniques. The results demonstrate the ability to reliably pass or fail images based on the illumination, focus, and scratch fraction of the image, followed by automatic extraction of morphological data with respect to fission gas voids, interaction layers, and grain boundaries. - Graphical abstract: Display Omitted - Highlights: • A technique is developed to score U–10Mo FIB-SEM image quality using CellProfiler. • The pass/fail metric is based on image illumination, focus, and area scratched. • Automated image analysis is performed in pipeline fashion to characterize images. • Fission gas void, interaction layer, and grain boundary coverage data is extracted. • Preliminary characterization results demonstrate consistency of the algorithm.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Production and cross-sectional characterization of aligned co-electrospun hollow microfibrous bulk assemblies

The development of co-electrospun (co-ES) hollow microfibrous assemblies of an appreciable thickness is critical for many practical applications, including filtration membranes and tissue-mimicking scaffolds. In this study, thick uniaxially aligned hollow microfibrous assemblies forming fiber bundles and strips were prepared by co-ES of polycaprolactone (PCL) and polyethylene oxide (PEO) as shell and core materials, respectively. Hollow microfiber bundles were deposited on a fixed rotating disc, which resulted in non-controllable cross-sectional shapes on a macroscopic scale. In comparison, fiber strips were produced with tuneable thickness and width by additionally employing an x–y translation stage in co-ES. Scanning electron microscopy (SEM) images of cross-sections of fiber assemblies were analyzed to investigate the effects of production time (from 0.5 h to 12 h), core flow rate (from 0.8 mL/h to 2.0 mL/h) and/or translation speed (from 0.2 mm/s to 5 mm/s) on the pores and porosity. We observed significant changes in pore size and shape with core flow rate but the influence of production time varied; five strips produced under the same conditions had reasonably good size and porosity reproducibility; pore sizes didn't vary significantly from strip bottom to surface, although the porosity gradually decreased and then returned to the initial level. - Highlights: • Hollow microfibrous assemblies based on co-electrospinning are demonstrated. • The thickness and width of co-electrospun strips were controllable. • Cross-sections of fibres had non-normally distributed pore sizes and shapes. • Cross-sections were significantly influenced by production time and flow rate. • Co-electrospun strips had reasonably good reproducible cross-sections.

36 MATERIALS SCIENCE↗

Infusion of hydrogen into nanostructured bainitic steel

Highlights: • Results show that austenite is more effective in trapping hydrogen than α/γ interfaces. • The H desorption behaviour was accurately reproduced with local equilibrium model. • The trapping capacity of retained austenite originates from the austenite lattice sites. - Abstract: The trapping of hydrogen in nanostructured bainitic steel has been investigated using thermal desorption analysis, in order to determine the potency of the ferrite-retained austenite (α/γ) interfaces and retained austenite as trapping sites. Thermal desorption data showed that the volume of retained austenite is more effective in trapping hydrogen than the interfaces. There is a close correlation between the quantity of hydrogen and the retained austenite content rather than the density of interfaces. A local equilibrium model was able to reproduce the hydrogen desorption behaviour of saturated and unsaturated samples considering both retained austenite and α/γ interfaces as the trapping sites. A trap binding energy ranging from 47 to 52 kJ/mol was estimated for retained austenite, suggesting that the observed trapping capacity originates from the austenite lattice sites.

36 MATERIALS SCIENCE↗

Multiscale mechanical behavior and microstructure evolution of extruded magnesium alloy sheets: Experimental and crystal plasticity analysis

Highlights: • Experimental stress-strain responses were reproduced by CPFE simulation based on Voronoi grains on three strain paths. • Textures predicted by simulation were in accordance with the ones measured by EBSD at the strain of 0.085. • Deformation heterogeneity in slip-dominated cases was found more significant than that in twin-favored case. • For slip-dominated cases, both high m′ value and high SFs in adjacent grains are responsible for strain localization. - Abstract: A phenomenological crystal plasticity finite element (CPFE) model based on Voronoi grains was applied to reproduce basic deformation features of a hot-extruded magnesium alloy sheet under various strain paths. Corresponding experimental investigations, including mechanical tests, electron back scattered diffraction (EBSD) measurements and optical observation, were also carried out as either a validation or a supplement of the numerical results. Predicted average stress-strain responses and texture evolution are in good accordance with measured ones. Furthermore, deformation heterogeneity at the mesoscopic and intergranular scale were investigated based on the proposed model. At the mesoscale, the heterogeneity in the slip-dominated cases tends to develop continuously, whereas the heterogeneity is retarded in twin-favored deformation. At the intergranular scale, it is concluded from the slip-dominated case that a high slip-transfer parameter and high Schmid factors (SFs) of principal slip systems in adjacent grains could accommodate higher local strain.

36 MATERIALS SCIENCE↗

Controlled growth of ZnO nanorods on textured silicon wafer and the application for highly effective and recyclable SERS substrate by decorating Ag nanoparticles

Highlights: • The growth behavior of ZnO nanorods (NRs) is studied on the textured Si wafer. • A new surface-enhanced Raman scattering (SERS) substrate has been achieved by assembling Ag nanoparticles onto the ZnO NRs. • The SERS substrate exhibits good performance in terms of high sensitivity, good reproducibility and recyclability. - Abstract: Based on the study of growth behavior of ZnO nanorods on the textured Si wafer, a new three-dimensional surface-enhanced Raman scattering substrate has been achieved by assembling Ag nanoparticles onto the ZnO nanorods to form a radial plasmonic nanostructure. It is found that the new substrate exhibits good performance in terms of high sensitivity and good reproducibility for surface-enhanced Raman scattering. The determined enhancement factor is in the order of 10{sup 7} and the Raman spectra exhibit the remarkable consistency with the deviation below 5.0%. Compared to the substrate fabricated with ZnO nanorod array on the flat Si wafer, the new substrates have the higher utility of excitation light. Meanwhile, the new substrate is demonstrated to be recyclable after the irradiation of ultraviolet light.

36 MATERIALS SCIENCE↗

A multi-prong approach towards the development of high performance Temperature sensor using MWCNTs/Al2O3 composite film

Highlights: • MWCNTs/Al{sub 2}O{sub 3} composite based self-standing highly sensitive temperature sensor. • Optimization of film thickness to achieve best performance of the device. • Effect of carrier drift under strong electron-phonon coupling is examined. • Non-contact measurements reveal possibilities of ambient environment monitoring. • Highly stable and reproducible response bidding commercial scale production. - Abstract: We report fabrication of high-performance temperature sensor from free-standing MWCNTs/Al{sub 2}O{sub 3} composite film where a multi-prong approach was undertaken to enhance sensor performance. Film thickness was varied until a threshold value was reached by playing surface-area to volume-ratio factor leading to enormous improvements in crucial sensor parameters–temperature coefficient of resistance (TCR) and thermal hysteresis. Increased TCR resulted in high sensitivity, ultrafast response and negligible hysteresis loss. Besides, effect of carrier-drift transport under strong electron-phonon scattering is investigated by permutation of channel-length and external DC bias. Observed TCR value is −0.96%/°C for 16.53 μm thick film, at 2 V applied-bias voltage for 1 mm channel-length. Moreover, the sensor exhibited negligible hysteresis loss along-with response and recovery times of ∼40 s and ∼185 s respectively. Non-contact mode temperature measurements also demonstrated excellent performance. Fabricated sensors exhibited good stability and negligible drift for six-months. These studies are significant towards fabricating simple, highly-sensitive, economic heat sensor with high reproducibility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗