Search NASA⌕ Search

SEARCH · Search NASA

Results for “STONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Design of an Automated Ultrasonic Scanning System for In-Situ Composite Cure Monitoring and Defect Detection

The preliminary design and development of an automated ultrasonic scanning system for in-situ composite cure monitoring and defect detection in the high temperature environment of an oven was completed. This preliminary design is a stepping stone to deployment in the high temperature and high pressure environment of an autoclave, the primary cure method of aerospace grade thermoset composites. Cure monitoring with real-time defect detection during the process could determine when defects form and how they move. In addition, real-time defect detection during cure could assist validating physics-based process models for predicting defects at all stages of the cure cycle. A physics-based process model for predicting porosity and fiber waviness originating during cure is currently under development by the NASA Advanced Composites Project (ACP). For the design, an ultrasonic contact scanner is enclosed in an insulating box that is placed inside an oven during cure. Throughout the cure cycle, the box is nitrogen-cooled to approximately room temperature to maintain a standard operating environment for the scanner. The composite part is mounted on the outside of the box in a vacuum bag on the build/tool plate. The build plate is attached to the bottom surface of the box. The scanner inspects the composite panel through the build plate, tracking the movement of defects introduced during layup and searching for new defects that may form during cure. The focus of this paper is the evaluation and selection of the build plate material and thickness. The selection was based on the required operating temperature of the scanner, the cure temperature of the composite material, thermal conductivity models of the candidate build plates, and a series of ultrasonic attenuation tests. This analysis led to the determination that a 63.5 mm thick build plate of borosilicate glass would be utilized for the system. The borosilicate glass plate was selected as the build plate material due to the low ultrasonic attenuation it demonstrated, its ability to efficiently insulate the scanner while supporting an elevated temperature on the part side of the plate, and the availability of a 63.5 mm thick plate without the need for lamination.

Hudson, Tyler B.↗

Direct Numerical Simulations of Acoustic Disturbances in Various Rectangular Nozzle Configurations

We perform Direct Numerical Simulations (DNS) to study the acoustic freestream disturbances radiating from the turbulent boundary layers along the contoured nozzle walls of a hypersonic wind tunnel with a rectangular test section. To begin with, the effects of the spanwise end walls are suppressed by confining the spanwise computational domain to a finite segment of the overall nozzle cross section and by imposing periodic boundary conditions across that spanwise domain. Besides providing a building-block configuration to reveal par- tial effects of the enclosed acoustic environment within the wind tunnel, these computations serve as a stepping stone toward the goal of fully-3D computations including the nozzle end walls. Building upon the earlier simulations of Deegan et al. (2018), we show that the computed acoustic characteristics in the spanwise periodic simulations are insensitive to changes in the grid resolution parameters (e.g., x+ and z+). This is relative to the previous simulations that involved a coarser resolution in the streamwise and wall-normal directions, especially up- stream of the test section. Furthermore, we outline a comparison of the pressure fluctuations induced by the turbulent boundary layers over the contoured nozzle walls and several other calculations involving boundary layers over a single flat plate at nearly the same value of the edge Mach number. We also show the impact of having only one turbulent boundary layer instead of two within the computational setup. Various flow statistics, including the first and second moments of the unsteady flow field, are computed for the different flow configurations. Good comparisons of the statistics of the nozzle-wall boundary-layer turbulence and of the freestream acoustic disturbances between the simulations of coarser and finer grids confirms DNS procedure, but also the insensitivity of noise characteristics t section to the inflow turbulence generation technique.

Hildebrand, Nathaniel↗

Parametric Cost Analysis of Refueling Options in Cis-Lunar Space

Over the next several years NASA intends to develop and maintain a sustained human presence in cis-lunar space and on the surface of the moon. The sustained lunar presence will then serve as a stepping stone to human Mars missions. To propel the spacecraft taking humans and cargo to and from the lunar surface and to and from Mars will require on the order of hundreds of tons of propellant. Expendable, one-time use refueling elements maybe more cost effective for smaller campaigns, but as the propellant requirement grows, so does the cost benefit of reusable systems. This paper will analyze the cost of several different architectures for delivering propellant to cislunar space to determine the conditions in which each architecture is likely to be more cost effective. The first architecture relies on expendable elements for propellant delivery while the second one reuses every element including launch vehicle stages. In addition to these two basic approaches, trades will analyze alterations to the architectures such as mission design, level of thermal control, and the incorporation of buses,tugs, and depots, each with different propellants, sizes, and reusability assumptions.

Paul D Friz↗

Discovery of a Fast Iron Low-ionization Outflow in the Early Evolution of the Nearby Tidal Disruption Event AT 2019qiz

We report the results of ultraviolet (UV) and optical photometric and spectroscopic analysis of the tidal disruption event (TDE) AT 2019qiz. Our follow-up observations started <10 days after the source began to brighten in the optical and lasted for a period of six months. Our late-time host-dominated spectrum indicates that the host galaxy likely harbors a weak active galactic nucleus. The initial Hubble Space Telescope (HST) spectrum of AT 2019qiz exhibits an iron and low-ionization broad absorption line (FeLoBAL) system that is seen for the first time in a TDE. This spectrum also bears a striking resemblance to that of Gaia16apd, a superluminous supernova. Our observations provide insights into the outflow properties in TDEs and show evidence for a connection between TDEs and engine-powered supernovae at early phases, as originally suggested by Metzger & Stone (2016). In a time frame of 50 days, the UV spectra of AT 2019qiz started to resemble those of previous TDEs with only high-ionization BALs. The change in UV spectral signatures is accompanied by a decrease in the outflow velocity, which began at 15,000 km/s and decelerated to ~ 10,000 km/s. A similar evolution in the Ha emission-line width further supports the speculation that the broad Balmer emission lines are formed in TDE outflows. In addition, we detect narrow absorption features on top of the FeLoBAL signatures in the early HST UV spectrum of AT 2019qiz. The measured H I column density corresponds to a Lyman-limit system, whereas the metal absorption lines (such as N V, C IV, Fe II, and Mg II) are likely probing the circumnuclear gas and interstellar medium in the host galaxy.

Tiara Hung↗

Modeling Electro-Optic Frequency Comb Generation as a Pump Source for Quantum Communications

The Quantum Communications group at NASA GRC is focused on developing technologies and system architectures to enable future space-based quantum networks. High-repetition rate pulsed pump lasers are needed because the signal on the quantum channel cannot be amplified, hence entanglement generation rates can only be increased through high-rate pumping. Additionally, tunability in center frequency, pulse width, and repetition rate allows for a wider parameter space over which to optimize quantum channel frequency conversion efficiency, joint spectral engineering, and channel synchronization for high-fidelity entanglement swapping –a necessary stepping-stone towards quantum repeater development. One of the most flexible methods for high-repetition rate pulse generation is through spectral shaping–generating a frequency comb from a continuous-wave(CW)laser using electro-optic modulators (EOMs). As a result, this project focuses on analytically modeling and simulating the effects various EOMs such as phase and intensity modulators have on a CW source. Generating a tunable frequency comb as the pump source allows us to conveniently fine-tune the central frequency, repetition rate, and the spectral shape of our source to match the strict optimal parameters for any given entanglement source considered in the future. These models and simulations are to be used for comparison purposes for future experiments as well as for providing the Quantum Communications group a convenient tool to understand the effects of manipulating various parameters have on the outgoing frequency comb.

Electro-optic modulator↗

Soluble Organic Matter (SOM) analysis of the Hayabusa2 samples: The first results

The Hayabusa2 spacecraft successfully collected the surface and possible sub-surface materials of the asteroid 162173 Ryugu. Ryugu is a C-type asteroid characterized by a low-albedo surface probably consisting of hydrous minerals and carbonaceous materials. [1] The direct optical and spectral analysis of the returned samples indicates that Ryugu material is dominated by hydrous carbonaceous chondrite-like matter (similar to CI chondrites) [2]. Since carbonaceous chondrites have generally yielded various types of organic matter, the collected Ryugu grains are expected to contain diverse types of organic compounds including bio-related molecules. The occurrence of organic compounds in the Ryugu surface will provide clues to the evolution of prebiotic molecules and their preservations associated with aqueous alteration of the primitive asteroid. The initial analysis of soluble organic matter (SOM) of the Hayabusa2-returned samples has been performed by an international team consisting of 32 members. Because the sample amount available for comprehensive SOM analyses is limited, and because the SOM is expected to be present as a complex mixture of various types of organic compounds with very small concentrations of each compound, high-sensitivity and high-resolution analytical techniques have been developed using carbonaceous meteorites [e.g. 3]. Two aggregate samples of the Ryugu grains (A106 and C107) were allocated for the solvent extractions and bulk carbon (C), hydrogen (H), nitrogen (N), sulfur (S) and oxygen (O) measurements. The A106 sample was collected during the 1st sampling in February 2019 and the C107 sample was collected during the 2nd sampling in July 2019 after the Small Carry Impactor (SCI) operation. They consist mainly of particles smaller than 1 mm in diameter, and each sample mass was 38-39 mg. They were firstly investigated spectroscopically in the near infrared wavelength range by the Stone Team prior to the solvent extractions. Other small grains (A0080 and C0057) were also allocated for this study to investigate the spatial distribution of organic compounds on the sample surface. The extraction and analytical measurements implemented by the SOM Team are summarized in Figure 1. Each powder sample was extracted sequentially with non-polar to polar solvents, i.e., hexane, dichloromethane (DCM), methanol (MeOH) and H2O, for non-targeted analysis to reveal the compound composition. Each solvent extract was analyzed by solution state nuclear magnetic resonance (NMR) spectroscopy [4], Fourier transform- ion cyclotron resonance/mass spectrometry (FT-ICR/MS) with ESI and APPI ionization [5] and by high-resolution mass spectroscopy using Orbitrap MS coupled with nano-liquid chromatography (nanoLC/Orbitrap MS) [6], and using two dimensional gas chromatography/mass spectrometry (GC×GC/MS). The extracted residues were passed to the Chemistry Team for further inorganic element analysis. The other powder sample was subjected to the hot water extraction for amino acid analyses including chiral isomer separation, which was performed by three-dimensional (3D) high-performance liquid chromatography (HPLC) with high-sensitivity fluorescence detection (FD) [7] and by HPLC/FD coupled with quadrupole-time of flight/mass spectrometry (QToF/MS) [8]. After the hot water extraction, the residue was split into two halves. One half was further extracted with hydrochloric acid (HCl) to analyze for amino acids in bound-form. The other half was sequentially extracted with DCM/MeOH (1/1) to analyze semi-polar compounds such as polycyclic aromatic hydrocarbons (PAHs) by GC/MS, followed by further extraction with formic acid to analyze polar heterocyclic compounds, and subsequent extraction with HCl to detect bound-form polar compounds. The extracted residues were passed to the IOM Team for the analysis of insoluble organic matter (IOM). Compound-specific stable isotope analyses will be performed using GC/combustion/isotope ratio mass spectrometry (GC/C/IRMS) if the compound concentration is high enough to enable such an isotopic measurement. All extraction procedures were performed on an ISO 6 (Class 100) clean bench inside an ISO 5 (Class 1000) clean room. Baked serpentine powder was also analyzed as a procedural blank. In situ organic compound analysis with the molecular imaging was performed using desorption electrospray ionization (DESI) equipped with Orbitrap MS [9, 10], followed by spatial imaging of organic compounds using ToF/secondary ion mass spectrometry (ToF/SIMS) [11]. The bulk chemical and isotopic compositions of CNS and HO were determined using nano-elemental analysis/isotope ratio mass spectrometry (nanoEA/IRMS) [12] and EA/pyrolysis/IRMS, respectively. We have identified a variety of indigenous organic compounds in the extracts of both A106 and C107 samples. The Ryugu grains host organic molecules under the high-vacuum and cosmic-ray irradiation environment of the asteroid surface. The analysis of extracted molecules is in progress, and the first results will be presented at the symposium.

Hiroshi Naraoka↗

Exploration Medical Capability Science and Research Overview and Update

The mission of the Exploration Medical Capability (ExMC) Element is to advance medical system design and risk-informed decision making for exploration beyond Low Earth Orbit to promote human health and performance in space. To accomplish this mission, ExMC focuses on several key areas: • Investigating specific risks that are relevant for human exploration spaceflight, including in-flight medical conditions, degraded or toxic medications, and renal stones • Developing medical probabilistic risk analysis tools that are integrated with systems engineering processes to inform the medical system trade space and support the development of robust requirements • Demonstrating and defining requirements for a prototype clinical decision support system • Developing and demonstrating novel medical technologies that will improve future medical capabilities in space This presentation will focus on selected scientific and technical conceptual drivers for the Element and its current and future research risks and gaps while providing an overview of the Element’s progress in 2021 and areas of focus for 2022.

Benjamin Easter↗

Human System Risk Changes in 2021

The Human System Risk Board (HSRB) has the overall responsibility for tracking the evolution of the top ~30 human system risks that it has identified to be associated with human spaceflight. As part of this process, the Board is charged with maintaining a consistent, integrated process to mitigate those risks, and developing evidence-based risk posture recommendations. Risks are re-evaluated in a Continuous Risk Management (CRM) process. This session will summarize the risk posture changes that have occurred in the last year and what high level research, performance, and epidemiologic data have informed those changes. Human System Risks updated in 2021 include: Dynamic Loads, Sensorimotor, EVA, Crew Egress, Behavioral Medicine, Electrical Shock, Human System Integration Architecture (HSIA), Toxic Exposure, Bone Fracture, Cardiovascular, Medical Conditions, Renal Stone, CO2 Exposure, and Pharmacology.

Mary Van Baalen↗

Adaptation to environmental extremes structures functional traits in biological soil crust and hypolithic microbial communities

Biological soil crusts (biocrusts) are widespread in drylands and deserts. At the microhabitat scale, they also host hypolithic communities that live under semi-translucent stones. Both environmental niches experience exposure to extreme conditions such as high UV radiation, desiccation, temperature fluctuations, and resource limitation. However, hypolithic communities are somewhat protected from extremes relative to biocrust communities. Conditions are otherwise similar, so comparing them can answer outstanding questions regarding adaptations to environmental extremes. Using metagenomic sequencing, we assessed the functional potential of dryland soil communities and identified the functional underpinnings of ecological niche differentiation in biocrusts versus hypoliths. We also determined the effect of the anchoring photoautotroph (moss or cyanobacteria). Genes and pathways differing in abundance between biocrusts and hypoliths indicate that biocrust communities adapt to the higher levels of UV radiation, desiccation, and temperature extremes through an increased ability to repair damaged DNA, sense and respond to environmental stimuli, and interact with other community members and the environment. Intracellular competition appears to be crucial to both communities, with biocrust communities waging war using the Type VI Secretion System (T6SS) and hypoliths favoring diversity of antibiotics. The dominant primary producer had a reduced effect on community functional potential compared with niche, but an abundance of genes related to monosaccharide, amino acid, and osmoprotectant uptake in moss-dominated communities indicates reliance on resources provided to heterotrophs by mosses. Our findings indicate that functional traits in dryland communities are driven by adaptations to extremes and we identify strategies that likely enable survival in dryland ecosystems.

Biological soil crusts↗

St. Joseph Peninsula Disasters: Using NASA Earth Observations to Investigate Land Cover, Shoreline Change, and Sediment Transport in St. Joseph Peninsula after Hurricane Michael

T.H. Stone Memorial St. Joseph Peninsula State Park experienced significant damages from Hurricane Michael in 2018, the first Category 5 hurricane to hit the contiguous United States since 1992. These damages included a 300-meter-wide and 10-meter-deep breach in the peninsula, habitat disruption, and a forced closure of over half of the total park area. These damages, coupled with restricted visitor access, resulted in a significant loss of revenue for the park. NASA DEVELOP partnered with the Florida Department of Environmental Protection (DEP) to determine the overall impact of Hurricane Michael on land cover and shoreline change by using NASA Earth observations including Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), Aqua Moderate Resolution Imaging Spectroradiometer (MODIS), and the European Space Agency’s Sentinel-2 Multispectral Instrument (MSI) to analyze sediment transport and climatology to further understand the lasting impacts of hurricanes on the ecosystems of the park. The DEVELOP team’s analyses showed that chlorophyll-a concentrations, sea surface temperature, and precipitation are increasing over time. The sediment transport analysis showed dynamic movement across the peninsula, with the greatest erosion occurring within the bay and along the length of the peninsula. These results are supported by evidence of declining seagrass abundances and seasonal turbidity patterns within those areas. Providing these analyses for the partner allows for a greater understanding of how best to proceed with restoration efforts, which may include rebuilding camping services, expanding fishing recreation, and conserving habitats for endangered species.

Erica Kriner↗

Constraining Alteration Processes Along the Siccar Point Unconformity in Gale Crater: Results from the Sample Analysis at Mars Instrument

A driving factor for sending the Mars Science Laboratory, Curiosity rover to Gale Crater was the orbital detection of clay minerals in the Glen Torridon (GT) region suggesting a past aqueous environment was habitable and could contain organic evidence of past microbiology. The objective of the Curiosity’s Sample Analysis at Mars (SAM)instrument was to detect organic evidence of past microbiology and volatile bearing mineralogy that would inform if past geochemical conditions would have supported microbiology in the GT region. The Siccar Point unconformity occurs between the underlying GT mudstone and the overlying Stimsons and stone of the Green heugh Pediment has evidence of enhanced alteration in the mudstone just below the contact suggestive of aqueous processes favorable for microbial activity. The origin of the altered material includes subaerial weathering, alteration from fluids moving along unconformity, upward fluid percolation from the mudstone or downward fluid percolation from the Pediment 1,2,3,4,5The objectives of this work were to 1) Utilize the S AM-EGA results to characterize the geochemistry and mineralogy above and below the Siccar Point unconformity through analysis of drilled samples in the3 GT mudstones and an overlying pediment sandstone. and 2) Utilize SAM-EGA results to constrain alteration scenario(s) below the unconformity.

B Sutter↗

Extraterrestrial Amino Acids in the C2 Ungrouped Carbonaceous Chondrite Tarda: A Unique Distribution

Introduction: Meteorites provide a record of the chemical processes that occurred in the early solar sys-tem. The delivery of organic matter by carbonaceous chondrites to the early Earth could have been an im-portant source of amino acids and other prebiotic or-ganic molecules required for the emergence of life [1]. To date, 96 amino acids have been named in meteor-ites, most of which are rare or absent in the biosphere [2]. The variability in amino acid concentrations and isomer distributions measured in carbonaceous chon-drites can be explained by differences in parent body chemistry and alteration conditions [3]. In addition, aqueous alteration was likely important in the amplifi-cation of some left-handed amino acids over their right-handed forms (L-excesses up to ~60%) in the Tagish Lake meteorite [3], suggesting that the origin of life on Earth and possibly elsewhere in the solar sys-tem was biased towards L-amino acids. On August 25, 2020, a fireball was witnessed in southern Morocco and the first pieces of the meteorite fall were recovered the following day near the town of Tarda [4]. Thousands of individual fragments were recovered from the strewn field totaling ~4 kg [4]. Based on petrographic observations, bulk mineralogy, and chemical and O-isotopic analyses, Tarda has been classified as a C2 ungrouped carbonaceous chondrite with similarities to Tagish Lake (though more primi-tive), as well as CI, CY, and CR chondrites [4,5]. The fall and rapid recovery of the Tarda stones provide an important opportunity to investigate a C-rich meteorite using the state-of-the-art techniques that will also be used to study the samples returned from asteroids Ryugu and Bennu by the Hayabusa2 and OSIRIS-REx missions, respectively. Here, we report the first amino acid analyses of the Tarda meteorite. The total concentrations, enantio-meric ratios and relative distributions of amino acids were determined using ultrahigh performance liquid chromatography with UV fluorescence and time-of-flight mass spectrometry (LC-FD/ToF-MS) at NASA GSFC. This analytical technique was employed on extracts from two different pre-rain Tarda meteorite fragments and a sample of sand collected from the Tarda fall site for the purpose of assessing potential terrestrial contamination. Bulk H, C, and N elemental and isotopic analyses were also conducted at the Car-negie Institution for Science (CIS) to assist with petro-logic type classification using elemental analysis iso-tope ratio mass spectrometry (EA-IRMS).

D P Glavin↗

A Short Glossary of Inclusive Language

Words matter—that old adage that many of us may have heard as children, Sticks and stones may break my bones, but words will never hurt me, is a harmful fallacy. In reality, the language we use has tremendous power to alienate, exclude, deride, humiliate, and wound. On the other hand, thoughtful use of language can signal openness, inclusivity, admiration, and celebration, or simply be an expression of empathy and care for our fellow humans. As part of The Oceanography Society (TOS) Justice, Equity, Diversity, and Inclusion Committee’s series of columns in Oceanography, here we provide a glossary of terms that are often used while discussing topics such as race, ethnicity, gender, sexual orientation, and gender identity. It should be explicitly stated that this list is neither definitive nor exhaustive. Indeed, the terms included here are likely heavily influenced by the authors’ own lived experiences and the lenses through which we see the world. Language is a living entity, a fluid social construct subject to rapid changes and overlaid with regional nuances. Indeed, what may be accurate and acceptable terminology for one person may be entirely unacceptable for another. Keeping this in mind, the following glossary is an attempt to group together some of the acronyms and phrases that are most commonly used today in social justice studies and bodies of work and that may have particular relevance to our community of ocean-related scientists, technologists, and stakeholders. We have borrowed heavily from a wide range of excellent existing scholarship and activism and have cited all sources used. We encourage the reader to follow the links to these multimedia resources and, perhaps, use them as teaching and discussion materials with your students, colleagues, and mentees. Finally, it is our hope that this glossary, along with the links provided to more comprehensive definitions and discussions, helps to define terms that you may have heard used, but not understood, and that it will serve to remind us of the power of the words we use in our everyday professional and personal lives. We begin by defining the very words that form the name of our committee: Justice, Equity, Diversity, and Inclusion (JEDI)

Susanne E. Craig↗

Analysis of Samples from Asteroid Ryugu Returned by Hayabusa2

After returning to Earth in the winter of 2020, the samples from Cb-type asteroid Ryugu were stored under atmosphere-free conditions at the Extraterrestrial Materials Curation Center of ISAS/JAXA, and investigated for basic descriptions (sample imaging, weighing, etc.). They were distributed to six initial analysis teams in Japan in June 2021. The "Stone" team, in charge of analysis of coarse particles (>1 mm in size), conducted a series of analyses using a variety of techniques including reflectance spectra measurement, synchrotron-radiation three-dimensional elemental and mineralogical analysis, bulk elemental analysis using muon beam, Fe valence state measurement by XANES and Mössbauer spectroscopy, detailed mineralogical and petrological characterization by scanning and transmission electron microscopes. Physical and thermal properties of Ryiugu samples were measured to understand the response to shock and heating. In this talk, I would like to introduce summary of analysis results and what comes to be known about the formation and evolution of asteroid Ryugu.

Tomoki Nakamura↗

Aqueous alteration of Cb-type asteroid Ryugu

The samples from the asteroid Ryugu, which returned to Earth in the winter of 2020 [1], were stored under pure Nitrogen conditions at the Extraterrestrial Materials Curation Center of ISAS. After basic description [2-3], they were distributed to six initial analysis teams in Japan in June 2021. The initial analysis "Stone" team, which was responsible for the analysis of coarse particles (>1 mm in size), consisted of about 150 scientists from Japan and abroad, and conducted a series of analyses We analyzed sixteen coarse Ryugu particles 1 ~ 8 mm in size: six from the 1st touch-down site and ten from the 2nd touch-down site. Individual coarse samples were cut by Xe-FIB or wire-saw to expose particular objects or textures to be exposed on the surface based on 3D structure and element distribution obtained by synchrotron X-ray CT analysis and XRF analysis, respectively. FE-SEM/EDS and FE-EPMA/WDS analysis were made on all polished sections. TEM observation of many FIB sections was made to see microstructures and to compare with carbonaceous chondrites. Many other analyses were carried out to characterize mineralogical and compositional properties and summary of the analysis procedures is described in [4]. X-ray CT analysis showed that all sixteen Ryugu particles are composed of fine-grained material, with no chondrules and CAIs larger than 100 μm in size. FE-EPMA observation showed that Ryugu samples are breccias, consisting of many small rock fragments of different compositions, lithologies, and histories. The most common lithology includes Mg-rich saponite and serpentine, dolomite, magnesite, hydroxyapatite, pyrrhotite, and magnetite as main constituents. The mineralogy of this major lithology supports the classification of Ryugu samples as CI chondrites, which experienced extensive aqueous alteration in Ryugu’s parent asteroid. Based on the obtained mineralogical properties, we performed chemical modeling of aqueous alteration of Ryugu’s parent asteroid [5]. Numerical simulations [6-8] to reproduce thermal history and impact-induced destruction of the Ryugu’s parent asteroid were also carried out using mineralogical and physical properties of the Ryugu samples. In the talk, I would like to explain the conditions of aqueous alteration occurred in the parent asteroid of Ryugu in order to show how the water in the asteroid changed the mineralogy and chemistry of the nebular dust.

T. Nakamura↗

Microstructural Constraints on the Formation of Diamond in Ureilites, the Case from the Kenna Meteorite

The origin of diamonds in ureilitic meteorites, a major family of ultramafic achondrites, has long been debated, with various formation mechanisms inferred, including: 1) shock conversion of preexisting graphite due to a hypervelocity impact on the ureilite parent body; 2) vapor deposition during condensation of the solar nebula; or 3) static transformation in the mantle of a large planetesimal (>1000 km in diameter). The Kenna ureilite is a 10.9 kg stone that was found in Kansas in 1972 and is dominantly composed of olivine and pigeonite (68% and 22% modal abundance, respectively), together with minor metal and carbon-rich regions. Within the carbon-rich domains researchers have identified microdiamonds up to ~10 µm in size. Due to the proximity of the extremely hard microdiamonds with soft graphite and moderately hard silicates, achieving an appropriately flat surface for electron backscatter diffraction (EBSD) analysis has proved challenging. We have, therefore, employed a Hitachi ArBlade 5000 broad beam Ar ion milling system to prepare a sample with an adequate surface uniformity. The ion milling dramatically improved indexing of the EBSD patterns and facilitated high-resolution microstructural analysis of the carbon-rich domains. The carbon-bearing regions occur as tabular domains between polygonal olivine and pigeonite, and are composed of aggregates of micrometer-scale diamond with intermediate graphite, oxides and metal grains. Within the microdiamonds, {111} twins are abundant, many of which form ragged lamellae consistent with mechanical twinning. The microdiamond assemblages appear to pseudomorph tabular graphite habits, which together with the abundant deformation twins, supports a shock transformation mechanism for microdiamond formation within the Kenna meteorite. To compliment the EBSD microstructural analyses, coordinated laser Raman, focused ion beam/transmission electron microscopy imaging and diffraction data, and NanoSIMS N and C tomographic isotopic imaging will be collected. These data will provide further constraints on the formation of diamonds within ureilites.

Timmons M Erickson↗

Effect of the Reynolds Number on the Freestream Disturbance Environment in a Mach 6 Nozzle

To understand the impact of unit Reynolds number on the acoustic disturbance field inside a high-speed wind tunnel, we use Direct Numerical Simulations (DNS) to model the turbulent boundary layers along the walls of a quasi-two-dimensional nozzle configuration. Intended as a stepping stone to fully three-dimensional simulations of freestream noise inside the NASA 20-Inch Mach 6 Wind Tunnel, the present simulations are based on periodic boundary conditions across the spanwise width of the computational domain that corresponds to about one third of the actual tunnel width. These simulations are performed at four different unit Reynolds numbers, ranging from 3.56e6 to 14.0e6 per meter. The predominantly hydrodynamic fluctuations inside the boundary layer are shown to be nearly unaffected by the presence of freestream forcing associated with the impinging acoustic radiation from the opposite wall. Thus, the Reynolds number trends associated with boundary-layer quantities are consistent with previously published DNS of flat-plate boundary layers at similar Mach numbers and wall temperature ratios. The unsteady disturbance environment within the nozzle core region is found to be approximately spatially homogeneous and purely acoustic in nature. The numerical results are used to make comparisons with tunnel noise measurements by Chou et al. [1,2]. Unlike previous comparisons involving static-pressure fluctuations based on the DNS and pitot-pressure fluctuations measured in the wind tunnel, direct comparisons involving the fluctuations in the same physical quantity, namely, the streamwise mass flux, have been reported for the first time. The predicted decrease in the root-mean-square fluctuations in pressure and mass flux with an increasing unit Reynolds number is in agreement with the measurements in the NASA 20-Inch Mach 6 Wind Tunnel. Additional details of the acoustic radiation field are quantified and should be useful toward a digital synthesis of the tunnel disturbance environment that would enable realistic simulations of the natural transition process.

Turbulence↗

Effect of the Reynolds Number on the Freestream Disturbance Environment in a Mach 6 Nozzle

To understand the impact of unit Reynolds number on the acoustic disturbance field inside a high-speed wind tunnel, we use Direct Numerical Simulations (DNS) to model the turbulent boundary layers along the walls of a quasi-two-dimensional nozzle configuration. Intended as a stepping stone to fully three-dimensional simulations of freestream noise inside the NASA 20-Inch Mach 6 Wind Tunnel, the present simulations are based on periodic boundary conditions across the spanwise width of the computational domain that corresponds to about one third of the actual tunnel width. These simulations are performed at four different unit Reynolds numbers, ranging from 3.56e6 to 14.0e6 per meter. The predominantly hydrodynamic fluctuations inside the boundary layer are shown to be nearly unaffected by the presence of freestream forcing associated with the impinging acoustic radiation from the opposite wall. Thus, the Reynolds number trends associated with boundary-layer quantities are consistent with previously published DNS of flat-plate boundary layers at similar Mach numbers and wall temperature ratios. The unsteady disturbance environment within the nozzle core region is found to be approximately spatially homogeneous and purely acoustic in nature. The numerical results are used to make comparisons with tunnel noise measurements by Chou et al. [1,2]. Unlike previous comparisons involving static-pressure fluctuations based on the DNS and pitot-pressure fluctuations measured in the wind tunnel, direct comparisons involving the fluctuations in the same physical quantity, namely, the streamwise mass flux, have been reported for the first time. The predicted decrease in the root-mean-square fluctuations in pressure and mass flux with an increasing unit Reynolds number is in agreement with the measurements in the NASA 20-Inch Mach 6 Wind Tunnel. Additional details of the acoustic radiation field are quantified and should be useful toward a digital synthesis of the tunnel disturbance environment that would enable realistic simulations of the natural transition process.

Acoustics↗