Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation methods and programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Mars Sample Return Earth Entry System Helicopter Drop Test Reconstruction

The Mars Sample Return campaign conducted four successful helicopter drop tests of the Earth Entry System at the Utah Test and Training Range on October, 2023. The tests acquired data for the 52.5 deg sphere cone geometry that can be used to develop models for the terminal descent aerodynamics and flight dynamics used to model ground impact conditions. The acquired test data included both sensor data outputs from an on-board inertial measurement unit, global positioning system, and video cameras as well as atmospheric measurements from weather balloons. This data was processed using a Kalman filter/smoother to reconstruct the capsule’s trajectory and aerodynamics. An equation-error method was used to reconcile the aerodynamics by solving for a set of dispersions in the aerodynamic database that form a best-fit to the reconstructed aerodynamics. The reconstructed trajectories were compared with flight simulations generated using Program to Optimize Simulated Trajectories II. The results indicate that the simulation underpredicted the vehicle oscillation amplitudes. The reconstruction exhibits a persistent low-amplitude oscillation that does not damp out as predicted.

Chris D Karlgaard↗

Wave dispersion in the hybrid-Vlasov model: Verification of Vlasiator

Vlasiator is a new hybrid-Vlasov plasma simulation code aimed at simulating the entire magnetosphere of the Earth. The code treats ions (protons) kinetically through Vlasov's equation in the six-dimensional phase space while electrons are a massless charge-neutralizing fluid [M. Palmroth et al., J. Atmos. Sol.-Terr. Phys. 99, 41 (2013); A. Sandroos et al., Parallel Comput. 39, 306 (2013)]. For first global simulations of the magnetosphere, it is critical to verify and validate the model by established methods. Here, as part of the verification of Vlasiator, we characterize the low-β plasma wave modes described by this model and compare with the solution computed by the Waves in Homogeneous, Anisotropic Multicomponent Plasmas (WHAMP) code [K. Rönnmark, Kiruna Geophysical Institute Reports No. 179, 1982], using dispersion curves and surfaces produced with both programs. The match between the two fundamentally different approaches is excellent in the low-frequency, long wavelength range which is of interest in global magnetospheric simulations. The left-hand and right-hand polarized wave modes as well as the Bernstein modes in the Vlasiator simulations agree well with the WHAMP solutions. Vlasiator allows a direct investigation of the importance of the Hall term by including it in or excluding it from Ohm's law in simulations. This is illustrated showing examples of waves obtained using the ideal Ohm's law and Ohm's law including the Hall term. Our analysis emphasizes the role of the Hall term in Ohm's law in obtaining wave modes departing from ideal magnetohydrodynamics in the hybrid-Vlasov model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Applying Gaussian Process Machine Learning and Modern Probabilistic Programming to Satellite Data to Infer CO 2 Emissions

Satellite data provides essential insights into the spatiotemporal distribution of CO 2 concentrations. However, many atmospheric inverse models fail to adequately incorporate the spatial and temporal correlations inherent in satellite observations and often lack rigorous methods for estimating parameters like spatial length scales. We introduce an inference model that processes the spatiotemporal covariance in satellite data and estimates hyperparameters such as covariance length scales. Our approach uses the Gaussian process (GP) machine learning (ML) and modern probabilistic programming languages (PPLs) to perform atmospheric inversions of emissions from satellite data. We develop a GP ML inversion system based on modern PPLs and the GEOS-Chem chemical transport model, simulating atmospheric CO 2 concentrations corresponding to the Orbiting Carbon Observatory-2/3 (OCO-2/3) data for July 2020. In our supervised learning framework, we treat the GEOS-Chem simulated data set as the target, with predictors derived by scaling the target with sector-specific factors hidden from the GP machine. Our results show that the GP model, combined with GPU-enabled PPLs, effectively retrieves true emission scaling factors and infers noise levels concealed within the data. This suggests that our method could be applied over larger areas with more complex covariance structures, enabling comprehensive analysis of the spatiotemporal patterns observed in OCO-2/3 and similar satellite data sets.

54 ENVIRONMENTAL SCIENCES↗

Development of Statistical Process Control Methodology for an Environmentally Compliant Surface Cleaning Process in a Bonding Laboratory

Bonding labs at both MSFC and the northern Utah production plant prepare bond test specimens which simulate or witness the production of NASA's Reusable Solid Rocket Motor (RSRM). The current process for preparing the bonding surfaces employs 1,1,1-trichloroethane vapor degreasing, which simulates the current RSRM process. Government regulations (e.g., the 1990 Amendments to the Clean Air Act) have mandated a production phase-out of a number of ozone depleting compounds (ODC) including 1,1,1-trichloroethane. In order to comply with these regulations, the RSRM Program is qualifying a spray-in-air (SIA) precision cleaning process using Brulin 1990, an aqueous blend of surfactants. Accordingly, surface preparation prior to bonding process simulation test specimens must reflect the new production cleaning process. The Bonding Lab Statistical Process Control (SPC) program monitors the progress of the lab and its capabilities, as well as certifies the bonding technicians, by periodically preparing D6AC steel tensile adhesion panels with EA-91 3NA epoxy adhesive using a standardized process. SPC methods are then used to ensure the process is statistically in control, thus producing reliable data for bonding studies, and identify any problems which might develop. Since the specimen cleaning process is being changed, new SPC limits must be established. This report summarizes side-by-side testing of D6AC steel tensile adhesion witness panels and tapered double cantilevered beams (TDCBs) using both the current baseline vapor degreasing process and a lab-scale spray-in-air process. A Proceco 26 inches Typhoon dishwasher cleaned both tensile adhesion witness panels and TDCBs in a process which simulates the new production process. The tests were performed six times during 1995, subsequent statistical analysis of the data established new upper control limits (UCL) and lower control limits (LCL). The data also demonstrated that the new process was equivalent to the vapor degreasing process.

Hutchens, Dale E.↗

CICART Center For Integrated Computation And Analysis Of Reconnection And Turbulence

CICART is a partnership between the University of New Hampshire (UNH) and Dartmouth College. CICART addresses two important science needs of the DoE: the basic understanding of magnetic reconnection and turbulence that strongly impacts the performance of fusion plasmas, and the development of new mathematical and computational tools that enable the modeling and control of these phenomena. The principal participants of CICART constitute an interdisciplinary group, drawn from the communities of applied mathematics, astrophysics, computational physics, fluid dynamics, and fusion physics. It is a main premise of CICART that fundamental aspects of magnetic reconnection and turbulence in fusion devices, smaller-scale laboratory experiments, and space and astrophysical plasmas can be viewed from a common perspective, and that progress in understanding in any of these interconnected fields is likely to lead to progress in others. The establishment of CICART has strongly impacted the education and research mission of a new Program in Integrated Applied Mathematics in the College of Engineering and Applied Sciences at UNH by enabling the recruitment of a tenure-track faculty member, supported equally by UNH and CICART, and the establishment of an IBM-UNH Computing Alliance. The proposed areas of research in magnetic reconnection and turbulence in astrophysical, space, and laboratory plasmas include the following topics: (A) Reconnection and secondary instabilities in large high-Lundquist-number plasmas, (B) Particle acceleration in the presence of multiple magnetic islands, (C) Gyrokinetic reconnection: comparison with fluid and particle-in-cell models, (D) Imbalanced turbulence, (E) Ion heating, and (F) Turbulence in laboratory (including fusion-relevant) experiments. These theoretical studies make active use of three high-performance computer simulation codes: (1) The Magnetic Reconnection Code, based on extended two-fluid (or Hall MHD) equations, in an Adaptive Mesh Refinement (AMR) framework, (2) the Particle Simulation Code, a fully electromagnetic 3D Particle-In-Cell (PIC) code that includes a collision operator, and (3) GS2, an Eulerian, electromagnetic, kinetic code that is widely used in the fusion program, and simulates the nonlinear gyrokinetic equations, together with a self-consistent set of Maxwell’s equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New Developments in Retropropulsion Testing for Mars Entry, Descent and Landing

NASA’s plans for landing human-scale payloads on Mars in the next decade require that retrorockets be used to decelerate the atmospheric entry vehicle continuously from supersonic conditions through soft touchdown. Conventional Mars entry vehicle architectures that include a single parachute for supersonic-to-subsonic descent are not scalable to the sizes needed to land humans on Mars (~20 metric tons). The major aerosciences risks are the uncertainties in predicting aerodynamic stability and performance during powered free-flight and landing. These risks are influenced partially by current limitations in relevant data and testing methods. Consequently, trajectory simulations currently depend on unvalidated powered descent and landing aerodynamics models. NASA engineers have identified gaps in testing methods that, if addressed, would improve the ability to validate these models. There are gaps in capabilities to test multi-engine hot-gas retropropulsion systems in US wind tunnels. This is partially due to the successful use of parachutes as decelerators for human spaceflight at Earth and for the entire Mars lander program to date. Retropulsion test data historically and to this day are limited to using high pressure air jets, at comparatively low temperatures,as engine plume simulants on subscale wind tunnel models. Additionally, the ability to directly measure aerodynamic interference force and moments is limited by existing flow-through balance capabilities. This paper briefly covers historical and recent test data, and identifies new ground test techniques as a means to provide more relevant test data for powered flight and landing aerodynamic model validation.These techniques include using heated inert gases as a substitute for combustion products, additively manufactured 6-component flow-through force and moment balances, and off-body quantitative diagnostic measurements.

Retropropulsion↗

Implicit Coupling Approach for Simulation of Charring Carbon Ablators

This study demonstrates that coupling of a material thermal response code and a flow solver with nonequilibrium gas/surface interaction for simulation of charring carbon ablators can be performed using an implicit approach. The material thermal response code used in this study is the three-dimensional version of Fully Implicit Ablation and Thermal response program, which predicts charring material thermal response and shape change on hypersonic space vehicles. The flow code solves the reacting Navier-Stokes equations using Data Parallel Line Relaxation method. Coupling between the material response and flow codes is performed by solving the surface mass balance in flow solver and the surface energy balance in material response code. Thus, the material surface recession is predicted in flow code, and the surface temperature and pyrolysis gas injection rate are computed in material response code. It is demonstrated that the time-lagged explicit approach is sufficient for simulations at low surface heating conditions, in which the surface ablation rate is not a strong function of the surface temperature. At elevated surface heating conditions, the implicit approach has to be taken, because the carbon ablation rate becomes a stiff function of the surface temperature, and thus the explicit approach appears to be inappropriate resulting in severe numerical oscillations of predicted surface temperature. Implicit coupling for simulation of arc-jet models is performed, and the predictions are compared with measured data. Implicit coupling for trajectory based simulation of Stardust fore-body heat shield is also conducted. The predicted stagnation point total recession is compared with that predicted using the chemical equilibrium surface assumption

Ablation↗

Development and characterization of a three-dimensional radiochromic film stack dosimeter for megavoltage photon beam dosimetry

Purpose: Three-dimensional (3D) dosimeters are particularly useful for verifying the commissioning of treatment planning and delivery systems, especially with the ever-increasing implementation of complex and conformal radiotherapy techniques such as volumetric modulated arc therapy. However, currently available 3D dosimeters require extensive experience to prepare and analyze, and are subject to large measurement uncertainties. This work aims to provide a more readily implementable 3D dosimeter with the development and characterization of a radiochromic film stack dosimeter for megavoltage photon beam dosimetry. Methods: A film stack dosimeter was developed using Gafchromic{sup ®} EBT2 films. The dosimeter consists of 22 films separated by 1 mm-thick spacers. A Virtual Water™ phantom was created that maintains the radial film alignment within a maximum uncertainty of 0.3 mm. The film stack dosimeter was characterized using simulations and measurements of 6 MV fields. The absorbed-dose energy dependence and orientation dependence of the film stack dosimeter were investigated using Monte Carlo simulations. The water equivalence of the dosimeter was determined by comparing percentage-depth-dose (PDD) profiles measured with the film stack dosimeter and simulated using Monte Carlo methods. Film stack dosimeter measurements were verified with thermoluminescent dosimeter (TLD) microcube measurements. The film stack dosimeter was also used to verify the delivery of an intensity-modulated radiation therapy (IMRT) procedure. Results: The absorbed-dose energy response of EBT2 film differs less than 1.5% between the calibration and film stack dosimeter geometries for a 6 MV spectrum. Over a series of beam angles ranging from normal incidence to parallel incidence, the overall variation in the response of the film stack dosimeter is within a range of 2.5%. Relative to the response to a normally incident beam, the film stack dosimeter exhibits a 1% under-response when the beam axis is parallel to the film planes. Measured and simulated PDD profiles agree within a root-mean-square difference of 1.3%. In-field film stack dosimeter and TLD measurements agree within 5%, and measurements in the field penumbra agree within 0.5 mm. Film stack dosimeter and TLD measurements have expanded (k = 2) overall measurement uncertainties of 6.2% and 5.8%, respectively. Film stack dosimeter measurements of an IMRT dose distribution have 98% agreement with the treatment planning system dose calculation, using gamma criteria of 3% and 2 mm. Conclusions: The film stack dosimeter is capable of high-resolution, low-uncertainty 3D dose measurements, and can be readily incorporated into an existing film dosimetry program.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A LINK TO THE PAST: USING MARKOV CHAIN MONTE CARLO FITTING TO CONSTRAIN FUNDAMENTAL PARAMETERS OF HIGH-REDSHIFT GALAXIES

We have developed a new method for fitting spectral energy distributions (SEDs) to identify and constrain the physical properties of high-redshift (4 < z < 8) galaxies. Our approach uses an implementation of Bayesian based Markov Chain Monte Carlo that we have dubbed '{pi}MC{sup 2}'. It allows us to compare observations to arbitrarily complex models and to compute 95% credible intervals that provide robust constraints for the model parameters. The work is presented in two sections. In the first, we test {pi}MC{sup 2} using simulated SEDs to not only confirm the recovery of the known inputs but to assess the limitations of the method and identify potential hazards of SED fitting when applied specifically to high-redshift (z > 4) galaxies. In the second part of the paper we apply {pi}MC{sup 2} to thirty-three 4 < z < 8 objects, including the spectroscopically confirmed Grism ACS Program for Extragalactic Science Ly{alpha} sample (4 < z < 6), supplemented by newly obtained Hubble Space Telescope/WFC3 near-IR observations, and several recently reported broadband selected z > 6 galaxies. Using {pi}MC{sup 2}, we are able to constrain the stellar mass of these objects and in some cases their stellar age and find no evidence that any of these sources formed at a redshift larger than z = 8, a time when the universe was Almost-Equal-To 0.6 Gyr old.

79 ASTRONOMY AND ASTROPHYSICS↗

A game-theoretic approach to nuclear fuel cycle transition analysis under uncertainty

We present a novel methodology for optimizing nuclear fuel cycle transitions that incorporates a game-theoretic approach and captures interactions among multiple decision makers. The methodology is demonstrated using a two-person sequential game with uncertainty, where the two players represent a policy maker and an electric utility company, though the method generalizes to any number and type of individual decision making entities. Coupled with a sophisticated nuclear fuel cycle simulator, rich transition scenarios may be analyzed to identify robust transition strategies. These strategies explicitly treat uncertainties using a stochastic programming approach, devising optimal near-term hedging strategies that simultaneously consider all possible states of the world, maintaining flexibility to allow for intelligent recourse decisions once uncertainties are resolved. In the demonstration game, reactor technology and fuel cycle scheme adopted by the electric utility are shown to depend on both the policy maker’s decisions and the distributions over uncertain technological and economic outcomes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Historical perspectives of BEPU research in US

Civilian nuclear energy started in earnest in the 1950s and experienced rapid growth in 1960-80s with increasingly larger reactors. These reactors were initially regulated based on the experience from the smaller reactors, but this could not be applied to the larger power reactors. Therefore, in 1974 the US Nuclear Regulatory Commission set up safety requirements based on defense in depth in 10 CFR 50.46, and set of guidance in 10 CFR 50 presented in Appendix K, for models and simulations of reactor safety analyses, to ensure conservatism in predicted safety parameters. These methods resulted in both conservative safety margins as well as economic and operational penalties. In the late 1970s and early 1980s, a large number of experiential programs provided data that allowed for the creation of best estimate models. These best estimate models showed the conservatism in Appendix K models. In 1988-89, USNRC modified the regulations and allowed the use of best estimate models provided they were coupled to a reliable and defensible measure of uncertainty in the prediction of safety parameters. This change in regulation strongly encouraged global activity for the development of best estimate codes and methods. To aide in this development, the USNRC provided one acceptable approach, the Code Scaling, Acceptability and Uncertainty Evaluation Methodology (CSAU). This approach was later refined in the Evaluation Model Development and Assessment Process (EMDAP).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A high-resolution large-eddy simulation framework for wildland fire predictions using TensorFlow

Background: Wildfires are becoming more severe, so we need improved tools to predict them over a wide range of conditions and scales. One approach towards this goal entails the use of coupled fire/atmosphere modelling tools. Although significant progress has been made in advancing their physical fidelity, existing tools have not taken full advantage of emerging programming paradigms and computing architectures to enable high-resolution wildfire simulations. Aims: The aim of this study was to present a new framework that enables landscape-scale wildfire simulations with physical representation of combustion at an affordable cost. Methods: We developed a coupled fire/atmosphere simulation framework using TensorFlow, which enables efficient and scalable computations on Tensor Processing Units. Key Results: Simulation results for a prescribed fire were compared with experimental data. Predicted fire behavior and statistical analysis for fire spread rate, scar area, and intermittency showed overall reasonable agreement. Scalability analysis was performed, showing close to linear scaling. Conclusions: While mesh refinement was shown to have less impact on global quantities, such as fire scar area and spread rate, it benefits predictions of intermittent fire behavior, buoyancy-driven dynamics, and small-scale turbulent motion. Implications: This new simulation framework is efficient in capturing both global quantities and unsteady dynamics of wildfires at high spatial resolutions.

54 ENVIRONMENTAL SCIENCES↗

Simulated Aging of Metal Tritides by Ball Milling Induced Gas Incorporation

The study of tritium aging effects on materials requires a significant time commitment as a consequence of its 12.3-year half-life, making developmental studies prohibitively difficult and expensive. However, detailed knowledge of long-term aging effects is critical to the development of structural and storage materials for future fusion reactor technologies. As a result, multiple approaches to simulated aging effects have been investigated. Here, we report a method of simulated tritium aging achieved though the incorporation of trapped gases via high-energy ball milling of LaNi 4.25 Al 0.75 alloy storage material. Experimental results verify the presence of trapped gases by a combination of temperature programmed desorption and LECO chemical analysis. Following gas incorporation, we find that many of the degraded hydrogen sorption properties found in aged storage materials are reproduced by the ball milled powders.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Potential underestimation of the internal target volume (ITV) from free-breathing CBCT

Purpose: Localization prior to delivery of SBRT to free-breathing patients is performed by aligning the planning internal target volume (ITV) from 4DCT with an on-board free-breathing cone-beam CT (FB-CBCT) image. The FB-CBCT image is assumed to also generate an ITV that captures the full range of motion, due to the acquisition spanning multiple respiratory cycles. However, the ITV could potentially be underestimated when the ratio of time spent in inspiration versus time spent in expiration (I/E ratio) deviates from unity. Therefore, the aim of this study was to investigate the effect of variable I/E ratios on the FB ITV generated from a FB-CBCT scan. Methods: This study employed both phantom and patient imaging data. For the phantom study, five periodic respiratory cycles were simulated with different I/E ratios. Six patient respiratory cycles with variable I/E ratios were also selected. All profiles were then programmed into a motion phantom for imaging and modified to exhibit three peak-to-peak motion amplitudes (0.5, 1.0, and 2.0 cm). Each profile was imaged using two spherical targets with 1.0 and 3.0 cm diameters. 2D projections were acquired with full gantry rotation of a kiloVoltage (kV) imager mounted onto the gantry of a modern linear accelerator. CBCT images were reconstructed from 2D projections using a standard filtered back-projection reconstruction algorithm. Quantitative analyses for the phantom study included computing the change in contrast along the direction of target motion as well as determining the area (which is proportional to the target volume) inside of the contour extracted using a Canny edge detector. For the patient study, projection data that were previously acquired under an investigational 4D CBCT slow-gantry imaging protocol were used to generate both FB-CBCT and 4D CBCT images. Volumes were then manually contoured from both datasets (using the same window and level) for quantitative comparison. Results: The phantom study indicated a reduction in contrast at the inferior edge of the ITV (corresponding to inspiration) as the ratio decreased, for both simulated and patient respiratory cycles. For the simulated phantom respiratory cycles, the contrast reduction of the smallest I/E ratio was 27.6% for the largest target with the smallest amplitude and 89.7% for the smallest target with the largest amplitude. For patient respiratory cycles, these numbers were 22.3% and 94.0%, respectively. The extracted area from inside of the target contours showed a decreasing trend as the I/E ratio decreased. In the patient study, the FB-CBCT ITVs of both lung tumors studied were underestimated when compared with their corresponding 4D CBCT ITV. The underestimations found were 40.1% for the smaller tumor and 24.2% for the larger tumor. Conclusions: The ITV may be underestimated in a FB-CBCT image when a patient's respiratory pattern is characterized by a disparate length of time spent in inspiration versus expiration. Missing the full target motion information during on-board verification imaging may result in localization errors.

61 RADIATION PROTECTION AND DOSIMETRY↗

GLUE Code: A framework handling communication and interfaces between scales

Many scientific applications are inherently multiscale in nature. Such complex physical phenomena often require simultaneous execution and coordination of simulations spanning multiple time and length scales. This is possible by combining expensive small-scale simulations (such as molecular dynamics simulations) with larger scale simulations (such continuum limit/hydro solvers) to allow for considerably larger systems using task and data parallelism. However, the granularity of the tasks can be very large and often leads to load imbalance. Traditionally, we use approximations to streamline the computation of the more costly interactions and this introduces trade-offs between simulation cost and accuracy. In recent years, the available computational power and the advances in machine learning have made computing these scale-bridging interactions and multiscale simulations more feasible. One driving application has been plasma modeling in inertial confinement fusion (ICF), which is fundamentally multiscale in nature. This requires deep understanding of how to extrapolate microscopic information into macroscopically relevant scales. For example, in ICF one needs an accurate understanding of the connection between experimental observables and the underlying microphysics. The properties of the larger scales are often affected by the microscale behavior incorporated usually into the equations of state and ionic and electronic transport coefficients (Liboff, 1959; Rinderknecht et al., 2014; Rosenberg et al., 2015; Ross et al., 2017). Instead of incorporating this information using reliable molecular dynamics (MD) simulations, one often needs to use theoretical models, due to the inability of MD to reach engineering scales (Glosli et al., 2007; Marinak et al., 1998). One approach to resolve this issue is by coupling two MD simulations of different scales via force interpolation, e.g., the AdResS method (Krekeler et al., 2018; Nagarajan et al., 2013). Another approach, which we will pursue in the scope of this work, is by enabling scale bridging between MD simulations and meso/macro-scale models through the development and support of application programming interfaces that these different applications can interact through.

54 ENVIRONMENTAL SCIENCES↗

Yearly report for the period Jan. 2018 – Feb. 2019 IC Project: w17_faultprediction “Critical Stress in Earth”

The consequence of earthquake is usually catastrophic. Currently, we cannot determine when a fault is approaching failure due to either anthropogenic activities or tectonic movement. In an anthropogenically perturbed setting, the rate of physical changes on faults far exceeds most natural processes with currently unpredictable and unmeasurable results. In a tectonic setting we generally do not know where a fault is in the earthquake cycle beyond noting how long has passed since the last rupture, which is itself sometimes unknown. The Laboratory has therefore funded a multi million multi-year LDRD-DR program that comprises experiments, numerical modeling, and machine learning in order to develop and test a highly novel approach to probe the earthquake cycle and in particular, to detect and locate stressed faults that are approaching failure. For this program, modeling of a series of sheared granular layers undergoing stick-slip behavior using the EES-17’s Combined Finite-Discrete Element Method (FDEM) based code HOSS (Hybrid Optimization Software Suite) plays a pivotal role since numerical simulations of granular fault gouge allow for analysis of the mechanical behavior of the system at a level of spatial and temporal resolution not accessible experimentally, and also offer the possibility of identifying the most important parameters governing earthquake dynamics. The simulated data also provide very detailed stress, strain and motion information for machine learning purpose to predict earthquake. The code – HOSS – has been developed in Geophysics Group in LANL during the past ten years and is used to simulate the stick-slip behavior of granular fault gouge. One of the key feature of HOSS is that it is superior to pure finite element method and discrete element method and can provide very detailed evolvement information of granular fault gouge. Additionally, its parallel computing capability makes large scale earthquake gouge simulation possible. Taking these facts into account, and also because few other fully parallel FDEM code exists, this IC project allows LANL to stay at the forefront of earthquake gouge and granular material simulation in the world.

42 ENGINEERING↗

Simulation and analyses of the aeroassist flight experiment attitude update method

A method which will be used to update the alignment of the Aeroassist Flight Experiment's Inertial Measuring Unit is simulated and analyzed. This method, the Star Line Maneuver, uses measurements from the Space Shuttle Orbiter star trackers along with an extended Kalman filter to estimate a correction to the attitude quaternion maintained by an Inertial Measuring Unit in the Orbiter's payload bay. This quaternion is corrupted by on-orbit bending of the Orbiter payload bay with respect to the Orbiter navigation base, which is incorporated into the payload quaternion when it is initialized via a direct transfer of the Orbiter attitude state. The method of updating this quaternion is examined through verification of baseline cases and Monte Carlo analysis using a simplified simulation, The simulation uses nominal state dynamics and measurement models from the Kalman filter as its real world models, and is programmed on Microvax minicomputer using Matlab, and interactive matrix analysis tool. Results are presented which confirm and augment previous performance studies, thereby enhancing confidence in the Star Line Maneuver design methodology.

Carpenter, J. R.↗