Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical analysis.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

POD-based analysis of combustion images in optically accessible engines

This paper reports on 2D images of combustion-related luminosity taken in two optically accessible automobile engines of the most recent generation. The results are discussed to elucidate physical phenomena in the combustion chambers. Then, proper orthogonal decomposition (POD) is applied to the acquired images. The coefficients of the orthogonal modes are then used for the analysis of cycle variability, along with data of dynamic in-cylinder pressure and rate of heat release. The advantage is that statistical analysis can be run on a small number of scalar coefficients rather than on the full data set of pixel luminosity values. Statistics of the POD coefficients provide information on cycle variations of the luminosity field. POD modes are then discriminated by means of normality tests, to separate the mean from the coherent and the incoherent parts of the fluctuation of the luminosity field, in a non-truncated representation of the data. The morphology of the fluctuation components can finally be reconstructed by grouping coherent and incoherent modes. The structure of the incoherent component of the fluctuation is consistent with the underlying turbulent field. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Insights into Corona Formation through Statistical Analyses

Statistical analysis of an expanded database of coronae on Venus indicates that the populations of Type 1 (with fracture annuli) and 2 (without fracture annuli) corona diameters are statistically indistinguishable, and therefore we have no basis for assuming different formation mechanisms. Analysis of the topography and diameters of coronae shows that coronae that are depressions, rimmed depressions, and domes tend to be significantly smaller than those that are plateaus, rimmed plateaus, or domes with surrounding rims. This is consistent with the model of Smrekar and Stofan and inconsistent with predictions of the spreading drop model of Koch and Manga. The diameter range for domes, the initial stage of corona formation, provides a broad constraint on the buoyancy of corona-forming plumes. Coronae are only slightly more likely to be topographically raised than depressions, with Type 1 coronae most frequently occurring as rimmed depressions and Type 2 coronae most frequently occuring with flat interiors and raised rims. Most Type 1 coronae are located along chasmata systems or fracture belts, while Type 2 coronas are found predominantly as isolated features in the plains. Coronae at hotspot rises tend to be significantly larger than coronae in other settings, consistent with a hotter upper mantle at hotspot rises and their active state.

Glaze, L. S.↗

Insights into Corona Formation Through Statistical Analyses

Statistical analysis of an expanded database of coronae on Venus indicates that the populations of Type 1 (with fracture annuli) and 2 (without fracture annuli) corona diameters are statistically indistinguishable, and therefore we have no basis for assuming different formation mechanisms. Analysis of the topography and diameters of coronae shows that coronae that are depressions, rimmed depressions, and domes tend to be significantly smaller than those that are plateaus, rimmed plateaus, or domes with surrounding rims. This is consistent with the model of Smrekar and Stofan and inconsistent with predictions of the spreading drop model of Koch and Munga. The diameter range for domes, the initial stage of corona formation, provides a broad constraint on the buoyancy of corona-forming plumes. Coronae are only slightly more likely to be topographically raised than depressions, with Type 1 coronae most frequently occurring as rimmed depressions and Type 2 coronae most frequently occurring with flat interiors and raised rims. Most Type 1 coronae are located along chasmata systems or fracture belts, while Type 2 coronae are found predominantly as isolated features in the plains. Coronae at hot spot rises tend to be significantly lager than coronae in other settings, consistent with a hotter upper mantle at hot spot rises and their active state.

Glaze, L. S.↗

EXPLORING THE COSMIC REIONIZATION EPOCH IN FREQUENCY SPACE: AN IMPROVED APPROACH TO REMOVE THE FOREGROUND IN 21 cm TOMOGRAPHY

With the intent of correctly restoring the redshifted 21 cm signals emitted by neutral hydrogen during the cosmic reionization processes, we re-examine the separation approaches based on the quadratic polynomial fitting technique in frequency space in order to investigate whether they work satisfactorily with complex foreground by quantitatively evaluating the quality of restored 21 cm signals in terms of sample statistics. We construct the foreground model to characterize both spatial and spectral substructures of the real sky, and use it to simulate the observed radio spectra. By comparing between different separation approaches through statistical analysis of restored 21 cm spectra and corresponding power spectra, as well as their constraints on the mean halo bias b and average ionization fraction x{sub e} of the reionization processes, at z = 8 and the noise level of 60 mK we find that although the complex foreground can be well approximated with quadratic polynomial expansion, a significant part of the Mpc-scale components of the 21 cm signals (75% for {approx}> 6 h {sup -1} Mpc scales and 34% for {approx}> 1 h {sup -1} Mpc scales) is lost because it tends to be misidentified as part of the foreground when the single-narrow-segment separation approach is applied. The best restoration of the 21 cm signals and the tightest determination of b and x{sub e} can be obtained with the three-narrow-segment fitting technique as proposed in this paper. Similar results can be obtained at other redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of loading control on strain bursts and dislocation avalanches at the nanometer and micrometer scale

Through three-dimensional discrete dislocation dynamics simulations, we show that by tuning the mode of external loading, the collective dynamics of dislocations undergo a transition from driven avalanches under stress control to quasiperiodic oscillations under strain control. We directly correlate measured intermittent plastic events with internal dislocation activities and collective dynamics. Under different loading modes, the roles of the weakest dislocation source and the defect population trend are significantly different. This finding raises new possibilities of controlling correlated dislocation activities and obtaining a low defect density in nanostructured devices by tuning external constraints. In addition, the effect of machine stiffness comes to light. The statistical analysis of the burst magnitude is revisited and carefully discussed. Self-organized criticality and scale-free statistics of strain bursts are obeyed under stress control. However, this behavior is shown to break down under strain control. Rapid stress drops under pure strain control force truncation of dislocation avalanches, leading to a dynamical transition to quasiperiodic oscillations.

3-dimensional systems↗

Data from: "Towards CONUS-Wide ML-Augmented Conceptually-Interpretable Modeling of Catchment-Scale Precipitation-Storage-Runoff Dynamics"

This data package was generated to support the manuscript “Towards CONUS-Wide Machine Learning-Augmented Conceptually Interpretable Modeling of Catchment-Scale Precipitation-Storage-Runoff Dynamics.” It provides input files, model outputs, plotting data, scripts, notebooks, and documentation used to develop, evaluate, and reproduce Mass-Conserving Perceptron (MCP)-based hydrologic modeling experiments across 513 selected Catchment Attributes and Meteorology for Large-sample Studies in the United States (CAMELS-US) basins. The files are organized by modeling component and analysis purpose, including rainfall–runoff experiments, snow module experiments, coupled hydrologic-snow experiments, Long Short-Term Memory (LSTM) benchmark results, model skill metrics, initialization and epoch records, cell-state normalization files, Akaike Information Criterion (AIC)-based model comparison files, and data used to generate manuscript figures. Tabular files can be opened using standard spreadsheet software or Python/R data-analysis tools. Python scripts, Jupyter notebooks, and selected MATLAB scripts are included for model execution, postprocessing, plotting, and statistical analysis. Quality assurance and quality control were conducted through the source-data selection and modeling workflow. Meteorological forcing, streamflow, and static catchment attributes were derived from the CAMELS-US dataset, and snow water equivalent data were derived from the University of Arizona (UA) Snow Water Equivalent dataset. Selected basins and time periods were screened during the associated research workflow to avoid missing observations or poor-quality cases. Static geospatial features were processed primarily using Quantum Geographic Information System (QGIS) and Geospatial Data Abstraction Library (GDAL) workflows. Additional details are provided in the associated manuscript and documentation.

ESS-DIVE CSV File Formatting Guidelines Reporting ↗

Acoustic emission spectral analysis of fiber composite failure mechanisms

The acoustic emission of graphite fiber polyimide composite failure mechanisms was investigated with emphasis on frequency spectrum analysis. Although visual examination of spectral densities could not distinguish among fracture sources, a paired-sample t statistical analysis of mean normalized spectral densities did provide quantitative discrimination among acoustic emissions from 10 deg, 90 deg, and plus or minus 45 deg, plus or minus 45 deg sub s specimens. Comparable discrimination was not obtained for 0 deg specimens.

Egan, D. M.↗

Evaluation and comparison of benchmark QSAR models to predict a relevant REACH endpoint: The bioconcentration factor (BCF)

The bioconcentration factor (BCF) is an important bioaccumulation hazard assessment metric in many regulatory contexts. Its assessment is required by the REACH regulation (Registration, Evaluation, Authorization and Restriction of Chemicals) and by CLP (Classification, Labeling and Packaging). We challenged nine well-known and widely used BCF QSAR models against 851 compounds stored in an ad-hoc created database. The goodness of the regression analysis was assessed by considering the determination coefficient (R{sup 2}) and the Root Mean Square Error (RMSE); Cooper's statistics and Matthew's Correlation Coefficient (MCC) were calculated for all the thresholds relevant for regulatory purposes (i.e. 100 L/kg for Chemical Safety Assessment; 500 L/kg for Classification and Labeling; 2000 and 5000 L/kg for Persistent, Bioaccumulative and Toxic (PBT) and very Persistent, very Bioaccumulative (vPvB) assessment) to assess the classification, with particular attention to the models' ability to control the occurrence of false negatives. As a first step, statistical analysis was performed for the predictions of the entire dataset; R{sup 2}>0.70 was obtained using CORAL, T.E.S.T. and EPISuite Arnot–Gobas models. As classifiers, ACD and log P-based equations were the best in terms of sensitivity, ranging from 0.75 to 0.94. External compound predictions were carried out for the models that had their own training sets. CORAL model returned the best performance (R{sup 2}{sub ext}=0.59), followed by the EPISuite Meylan model (R{sup 2}{sub ext}=0.58). The latter gave also the highest sensitivity on external compounds with values from 0.55 to 0.85, depending on the thresholds. Statistics were also compiled for compounds falling into the models Applicability Domain (AD), giving better performances. In this respect, VEGA CAESAR was the best model in terms of regression (R{sup 2}=0.94) and classification (average sensitivity>0.80). This model also showed the best regression (R{sup 2}=0.85) and sensitivity (average>0.70) for new compounds in the AD but not present in the training set. However, no single optimal model exists and, thus, it would be wise a case-by-case assessment. Yet, integrating the wealth of information from multiple models remains the winner approach. - Highlights: • REACH encourages the use of in silico methods in the assessment of chemicals safety. • The performances of nine BCF models were evaluated on a benchmark database of 851 chemicals. • We compared the models on the basis of both regression and classification performance. • Statistics on chemicals out of the training set and/or within the applicability domain were compiled. • The results show that QSAR models are useful as weight-of-evidence in support to other methods.

54 ENVIRONMENTAL SCIENCES↗

Comparison of image noise and image quality between full-dose abdominal computed tomography scans reconstructed with weighted filtered back projection and half-dose scans reconstructed with improved sinogram-affirmed iterative reconstruction (SAFIRE*)

Purpose: To retrospectively compare the image noise, signal-to-noise ratio (SNR), and subjective image quality between CT images acquired with a dual-source, split-dose imaging protocol reconstructed at full and half doses with weighted filtered back projection (wFBP) and an improved sinogram-affirmed iterative reconstruction algorithm (SAFIRE*). Methods: Fifty-three consecutive patients underwent contrast-enhanced CT of the abdomen using a standardized dual-source, single energy CT protocol. Half-dose images were retrospectively generated using data from one detector only. Full-dose datasets were reconstructed with wFBP, while half-dose datasets were reconstructed with wFBP and SAFIRE* strengths 1–5. Region of interest analysis was performed to assess SNR and noise. Diagnostic acceptability, subjective noise, and spatial resolution were graded on a 10-point scale by two readers. Statistical analysis was carried out with repeated measures analysis of variance, Wilcoxon signed rank test, and Cohen’s κ test. Results: With the increasing strengths of SAFIRE*, a progressive reduction in noise and increase in SNR (p < 0.01) was observed. There was a statistically significant decrease in objective noise and increase in SNR in half-dose SAFIRE* strength 4 and 5 reconstructions compared to full-dose reconstructions using wFBP (p < 0.01). Qualitative analysis revealed a progressive increase in diagnostic acceptability, decrease in subjective noise and increase in spatial resolution for half-dose images reconstructed with the increasing strengths of SAFIRE* (p < 0.01). Conclusions: Half-dose CT images reconstructed with SAFIRE* at strength 4 and 5 have superior image quality compared to full-dose images reconstructed with wFBP. SAFIRE* potentially allows dose reductions in the order of 50% over wFBP.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Implementation of a Bayesian Engine for Uncertainty Analysis

In probabilistic risk assessment, it is important to have an environment where analysts have access to a shared and secured high performance computing and a statistical analysis tool package. As part of the advanced small modular reactor probabilistic risk analysis framework implementation, we have identified the need for advanced Bayesian computations. However, in order to make this technology available to non-specialists, there is also a need of a simplified tool that allows users to author models and evaluate them within this framework. As a proof-of-concept, we have implemented an advanced open source Bayesian inference tool, OpenBUGS, within the browser-based cloud risk analysis framework that is under development at the Idaho National Laboratory. This development, the “OpenBUGS Scripter” has been implemented as a client side, visual web-based and integrated development environment for creating OpenBUGS language scripts. It depends on the shared server environment to execute the generated scripts and to transmit results back to the user. The visual models are in the form of linked diagrams, from which we automatically create the applicable OpenBUGS script that matches the diagram. These diagrams can be saved locally or stored on the server environment to be shared with other users.

99 GENERAL AND MISCELLANEOUS↗

A multiparametric analysis of the Einstein sample of early-type galaxies. 2: Galaxy formation history and properties of the interstellar medium

We have conducted bivariate and multivariate statistical analysis of data measuring the integrated luminosity, shape, and potential depth of the Einstein sample of early-type galaxies (presented by Fabbiano et al. 1992). We find significant correlations between the X-ray properties and the axial ratios (a/b) of our sample, such that the roundest systems tend to have the highest L(sub x) and L(sub x)/L(sub B). The most radio-loud objects are also the roundest. We confirm the assertion of Bender et al. (1989) that galaxies with high L(sub x) are boxy (have negative a(sub 4)). Both a/b and a(sub 4) are correlated with L(sub B), but not with IRAS 12 um and 100 um luminosities. There are strong correlations between L(sub x), Mg(sub 2), and sigma(sub nu) in the sense that those systems with the deepest potential wells have the highest L(sub x) and Mg(sub 2). Thus the depth of the potential well appears to govern both the ability to reatin an ISM at the present epoch and to retain the enriched ejecta of early star formation bursts. Both L(sub x)/L(sub B) and L(sub 6) (the 6 cm radio luminosity) show threshold effects with sigma(sub nu) exhibiting sharp increases at log sigma(sub nu) approximately = 2.2. Finally, there is clearly an interrelationship between the various stellar and structural parameters: The scatter in the bivariate relationships between the shape parameters (a/b and a(sub 4)) and the depth parameter sigma(sub nu) is a function of abundance in the sense that, for a given a(sub 4) or a/b, the systems with the highest sigma(sub nu) also have the highest Mg(sub 2). Furthermore, for a constant sigma(sun nu), disky galaxies tend to have higher Mg(sub 2) than boxy ones. Alternatively, for a given abundance, boxy ellipticals tend to be more massive than disky ellipticals. One possibility is that early-type galaxies of a given mass, originating from mergers (boxy ellipticals), have lower abundances than 'primordial' (disky) early-type galaxies. Another is that disky inner isophotes are due not to primordial dissipation collapse, but to either the self-gravitating inner disks of captured spirals or the dissipational collapse of new disk structures from the premerger ISM. The high measured nuclear Mg(sub 2) values would thus be due to enrichment from secondary bursts of star formation triggered by the merging event.

Eskridge, Paul B.↗

Monte Carlo investigation of thrust imbalance of solid rocket motor pairs

The Monte Carlo method of statistical analysis is used to investigate the theoretical thrust imbalance of pairs of solid rocket motors (SRMs) firing in parallel. Sets of the significant variables are selected using a random sampling technique and the imbalance calculated for a large number of motor pairs using a simplified, but comprehensive, model of the internal ballistics. The treatment of burning surface geometry allows for the variations in the ovality and alignment of the motor case and mandrel as well as those arising from differences in the basic size dimensions and propellant properties. The analysis is used to predict the thrust-time characteristics of 130 randomly selected pairs of Titan IIIC SRMs. A statistical comparison of the results with test data for 20 pairs shows the theory underpredicts the standard deviation in maximum thrust imbalance by 20% with variability in burning times matched within 2%. The range in thrust imbalance of Space Shuttle type SRM pairs is also estimated using applicable tolerances and variabilities and a correction factor based on the Titan IIIC analysis.

Sforzini, R. H.↗

Atmospheric statistics for aerospace vehicle operations

Statistical analysis of atmospheric variables was performed for the Shuttle Transportation System (STS) design trade studies and the establishment of launch commit criteria. Atmospheric constraint statistics have been developed for the NASP test flight, the Advanced Launch System, and the National Launch System. The concepts and analysis techniques discussed in the paper are applicable to the design and operations of any future aerospace vehicle.

Smith, O. E.↗

An Automated System for Chromosome Analysis

The design, construction, and testing of a complete system to produce karyotypes and chromosome measurement data from human blood samples, and to provide a basis for statistical analysis of quantitative chromosome measurement data are described.

Castleman, K. R.↗

PYSIMFRAC: A Python library for synthetic fracture generation and analysis

In this paper, we introduce PYSIMFRAC, an open-source python library for generating 3-D synthetic fracture realizations, integrating with fluid simulators, and performing analysis. PYSIMFRAC allows the user to specify one of three fracture generation techniques (Box, Gaussian, or Spectral) and perform statistical analysis including the autocorrelation, moments, and probability density functions of the fracture surfaces and aperture. This analysis and accessibility of a python library allows the user to create realistic fracture realizations and vary properties of interest. In addition, PYSIMFRAC includes integration examples to two different pore-scale simulators and the discrete fracture network simulator, dfnWorks. The capabilities developed in this work provides opportunity for quick and smooth adoption and implementation by the wider scientific community for accurate characterization of fluid transport in geologic media. We present PYSIMFRAC along with integration examples and discuss the ability to extend PYSIMFRAC from a single complex fracture to complex fracture networks.

58 GEOSCIENCES↗

A flux-balanced fluid model for collisional plasma edge turbulence: Numerical simulations with different aspect ratios

We investigate the drift wave–zonal flow dynamics in a shearless slab geometry with the new flux-balanced Hasegawa-Wakatani model. As in previous Hasegawa-Wakatani models, we observe a sharp transition from a turbulence dominated regime to a zonal jet dominated regime as we decrease the plasma resistivity. However, unlike previous models, zonal structures are always present in the flux-balanced model, even for high resistivity, and strongly reduce the level of particles and vorticity flux. The more robust zonal jets also have a higher variability than in previous models, which is further enhanced when the computational domain is chosen to be elongated in the radial direction. In these cases, we observe complex multiscale dynamics, with multiple jets interacting with one another, and intermittent bursts. We present a detailed statistical analysis which highlights how the changes in the aspect ratio of the computational domain affect the third-order statistical moments, and thus modify the turbulent dynamics. By changing the aspect ratio and extending either the radial or the binormal direction, the present model study offers a better approximation to mimic turbulence in flux tube simulations for either very low magnetic shear or very high magnetic shear systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Landsat test of diffuse reflectance models for aquatic suspended solids measurement

Landsat radiance data were used to test mathematical models relating diffuse reflectance to aquatic suspended solids concentration. Digital CCT data for Landsat passes over the Bay of Fundy, Nova Scotia were analyzed on a General Electric Co. Image 100 multispectral analysis system. Three data sets were studied separately and together in all combinations with and without solar angle correction. Statistical analysis and chromaticity analysis show that a nonlinear relationship between Landsat radiance and suspended solids concentration is better at curve-fitting than a linear relationship. In particular, the quasi-single-scattering diffuse reflectance model developed by Gordon and coworkers is corroborated. The Gordon model applied to 33 points of MSS 5 data combined from three dates produced r = 0.98.

Munday, J. C., Jr.↗