Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Hepatically-metabolized and -excreted artificial oxygen carrier, hemoglobin vesicles, can be safely used under conditions of hepatic impairment

The hemoglobin vesicle (HbV) is an artificial oxygen carrier in which a concentrated Hb solution is encapsulated in lipid vesicles. Our previous studies demonstrated that HbV is metabolized by the mononuclear phagocyte system, and the lipid components are excreted from the liver. It is well-known that many hepatically-metabolized and -excreted drugs show altered pharmaceutics under conditions of liver impairment, which results in adverse effects. The aim of this study was to determine whether the administration of HbV causes toxicity in rats with carbon tetrachloride induced liver cirrhosis. Changes in plasma biochemical parameters, histological staining and the pharmacokinetic distribution of HbV were evaluated after an HbV injection of the above model rats at a putative clinical dose (1400 mgHb/kg). Plasma biochemical parameters were not significantly affected, except for a transient elevation of lipase, lipid components and bilirubin, which recovered within 14 days after an HbV infusion. Negligible morphological changes were observed in the kidney, liver, spleen, lung and heart. Hemosiderin, a marker of iron accumulation in organs, was observed in the liver and spleen up to 14 days after HbV treatment, but no evidence of oxidative stress in the plasma and liver were observed. HbV is mainly distributed in the liver and spleen, and the lipid components are excreted into feces within 7 days. In conclusion, even under conditions of hepatic cirrhosis, HbV and its components exhibit the favorable metabolic and excretion profile at the putative clinical dose. These findings provide further support for the safety and effectiveness of HbV in clinical settings.

60 APPLIED LIFE SCIENCES↗

Flavanone silibinin treatment attenuates nitrogen mustard-induced toxic effects in mouse skin

Currently, there is no effective antidote to prevent skin injuries by sulfur mustard (SM) and nitrogen mustard (NM), which are vesicating agents with potential relevance to chemical warfare, terrorist attacks, or industrial/laboratory accidents. Our earlier report has demonstrated the therapeutic efficacy of silibinin, a natural flavanone, in reversing monofunctional alkylating SM analog 2-chloroethyl ethyl sulfide-induced toxic effects in mouse skin. To translate this effect to a bifunctional alkylating vesicant, herein, efficacy studies were carried out with NM. Topical application of silibinin (1 or 2 mg) 30 min after NM exposure on the dorsal skin of male SKH-1 hairless mice significantly decreased NM-induced toxic lesions at 24, 72 or 120 h post-exposure. Specifically, silibinin treatment resulted in dose-dependent reduction of NM-induced increase in epidermal thickness, dead and denuded epidermis, parakeratosis and microvesication. Higher silibinin dose also caused a 79% and 51%reversal in NM-induced increases in myeloperoxidase activity and COX-2 levels, respectively. Furthermore, silibinin completely prevented NM-induced H2A.X phosphorylation, indicating reversal of DNA damage which could be an oxidative DNA damage as evidenced by high levels of 8-oxodG in NM-exposed mouse skin that was significantly reversed by silibinin. Together, these findings suggest that attenuation of NM-induced skin injury by silibinin is due to its effects on the pathways associated with DNA damage, inflammation, vesication and oxidative stress. In conclusion, results presented here support the optimization of silibinin as an effective treatment of skin injury by vesicants. - Highlights: • Silibinin treatment attenuated nitrogen mustard (NM)-induced skin injury. • Silibinin affects pathways associated with DNA damage, inflammation and vesication. • The efficacy of silibinin could also be associated with oxidative stress. • These results support testing and optimization of silibinin against SM-induced skin injury.

60 APPLIED LIFE SCIENCES↗

Comparative investigation on chemical looping combustion of coal-derived synthesis gas containing H2S over supported NiO oxygen carriers

Chemical looping combustion (CLC) of simulated coal-derived synthesis gas was conducted with NiO oxygen carriers supported on SiO2, ZrO2, TiO2, and sepiolite. The effect of H2S on the performance of these samples for the CLC process was also evaluated. Five-cycle thermogravimetric analysis (TGA) tests at 800 C indicated that all oxygen carriers had a stable performance at 800 C, except NiO/SiO2. Full reduction/oxidation reactions of the oxygen carrier were obtained during the five-cycle test. It was found that support had a significant effect on reaction performance of NiO both in reduction and oxidation rates. The reduction reaction was significantly faster than the oxidation reaction for all oxygen carriers, while the oxidation reaction is fairly slow due to oxygen diffusion on NiO layers. The reaction profile was greatly affected by the presence of H2S, but there was no effect on the capacity due to the presence of H2S in synthesis gas. The presence of H2S decreased reduction reaction rates significantly, but oxidation rates of reduced samples increased. X-ray diffraction (XRD) data of the oxidized samples after a five-cycle test showed stable crystalline phases without any formation of sulfides or sulfites/sulfates. Increase in reaction temperature to 900 C had a positive effect on the performance.

01 COAL, LIGNITE, AND PEAT↗

Augmenter of liver regeneration inhibits TGF-β1-induced renal tubular epithelial-to-mesenchymal transition via suppressing TβR II expression in vitro

Tubular epithelial-to-mesenchymal transition (EMT) plays a crucial role in the progression of renal tubular interstitial fibrosis (TIF), which subsequently leads to chronic kidney disease (CKD) and eventually, end-stage renal disease (ESRD). We propose that augmenter of liver regeneration (ALR), a member of the newly discovered ALR/Erv1 protein family shown to ameliorate hepatic fibrosis, plays a similar protective role in renal tubular cells and has potential as a new treatment option for CKD. Here, we showed that recombinant human ALR (rhALR) inhibits EMT in renal tubular cells by antagonizing activation of the transforming growth factor-β1 (TGF-β1) signaling pathway. Further investigation revealed that rhALR suppresses the expression of TGF-β receptor type II (TβR II) and significantly alleviates TGF-β1-induced phosphorylation of Smad2 and nuclear factor-κB (NF-κB). No apparent adverse effects were observed upon the addition of rhALR alone to cells. These findings collectively suggest that ALR plays a role in inhibiting progression of renal tubular EMT, supporting its potential utility as an effective antifibrotic strategy to reverse TIF in CKD. - Highlights: • ALR is involved in the pathological progression of renal EMT in NRK-52E cells. • ALR suppresses the expression of TβRII and the phosphorylation of Smad2 and NF-κB. • ALR plays a role in inhibiting progression of renal tubular EMT.

60 APPLIED LIFE SCIENCES↗

Protective effects of intravitreal administration of mesenchymal stem cell-derived exosomes in an experimental model of optic nerve injury

Traumatic optic neuropathy results in the loss of retinal ganglion cells (RGCs), leading to unavoidable visual impairment. However, there is no effective therapy by far. Accumulated studies support the perception that mesenchymal stem cells (MSCs) secrete exosomes that serve as a protective paracrine factor. The study aimed to explore and evaluate the potential therapeutic effects of intravitreal transplantation of MSC-derived exosomes (MSC-exos) in an experimental model of optic nerve crush (ONC). Exosomes were isolated from rat MSCs and characterized by transmission electron microscope and western blotting. At the onset of ONC, a single intravitreal injection of exosomes or PBS was administered to the rats. At day 30, hematoxylin and eosin staining, immunohistochemistry, and βIII-tubulin staining were performed to evaluate the survival of RGCs. Moreover, TUNEL assay was used to examine the apoptosis of RGCs. Inflammation-relevant factors were identified via quantitative polymerase chain reaction. The expression levels of cell apoptosis-related molecules and key members of the PI3K/AKT signaling pathway were determined via western blot analysis. We found that MSC-exos exhibited typical characteristic morphologies (cup-shaped) and sizes (peak size of 93 nm). Furthermore, they exhibited substantial expression of the exosome markers CD63 and TSG101, but lacked the expression of the cellular marker GM130. Treatment with intravitreal MSC-exos notably promoted the survival of RGCs in ONC rats. The level of pro-inflammatory cytokines, including TNF-α, IL-1β, IL-6, IL-8, and MCP-1, were reduced, whereas those of the anti-inflammatory factor IL-10 were increased. Moreover, the apoptosis induced by ONC was decreased by the administration of MSC-exos via upregulation of the Bcl-2/Bax ratio and downregulation of caspase-3 activity. Furthermore, MSC-exos significantly stimulated AKT phosphorylation, whereas LY294002 restored the apoptosis-preventing effects of MSC-exos. The results of our results demonstrated that intravitreal administration of MSC-exos ameliorates ONC-induced injury in a rat model. These findings might aid in the development of effective exosome-based therapeutic strategies for the treatment of optic nerve degeneration.

60 APPLIED LIFE SCIENCES↗

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Sol immobilization technique: a delicate balance between activity, selectivity and stability for gold catalyst

Sol immobilization is a widely used method to prepare gold catalysts. The presence of the protectivelayer can have a significant influence on catalyst properties by mediating metal-support and reactantmetal interactions. This paper details the effect of a polyvinyl alcohol (PVA) protecting groups on the activity of a supported gold catalysts as well as its selectivity towards glycerol oxidation.

Villa, Alberto↗

Promotion of Au(en)(2)Cl-3-derived Au/fumed SiO2 by treatment with KMnO4

A new method for the removal of organic ligands used in the synthesis of nanoparticle catalysts via solution-phase chemical oxidation and subsequent pretreatment at moderate temperatures was developed. This synthesis protocol is advantageous for the preparation of highly dispersed gold catalysts with minimum sintering. Highly active Au/SiO{sub 2}-based catalysts were prepared by treating Au(en){sub 2}Cl{sub 3}-derived Au/fumed SiO{sub 2} in strongly oxidative KMnO{sub 4} solutions. The low-temperature activity in CO oxidation increased dramatically following the KMnO{sub 4} treatment and subsequent thermal activation (including treatment in O{sub 2}-He at 300-600 C). The influences of the pH values of KMnO{sub 4} solutions and temperatures of activation in O{sub 2}-He prior to the reaction testing were investigated, and relevant characterization using XRD, TEM, TG/DTG, SEM, EDX, and ICP-OES was conducted. The catalyst stability in CO oxidation was studied as a function of reaction time on stream. The origin of the promotional effect was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Zircaloy-4 Welding and Hydrogen Charging Effects for Use as the Structural Material for the Target Solution Vessel and Support Lines of SHINE

The subcritical hybrid intense neutron emitter (SHINE) is a proposed 99 Mo production facility to be constructed in the United States. It uses a deuterium (D) and tritium (T) fusion source to cause subcritical fission in an aqueous uranium solution, which is cycled to collect the 99 Mo products. The target solution vessel (TSV) is the container of the aqueous uranium solution, so it must remain structurally sound during operational exposure to water, fission products, neutrons, and hydrogen isotopes. The TSV will be large enough to require welding, so the exposure of joints to these same conditions must also be considered. The candidate material being investigated is Zircaloy-4. While Zircaloy-4 has a long history in the nuclear industry, it has primarily been used as fuel cladding at service temperatures of ~300°C. Zircaloy-4 must be evaluated for behavior under neutron irradiation at SHINE-relevant temperatures of <100°C. In this project, the effects of hydrogen, welding, and neutron irradiation at low temperatures are investigated.

36 MATERIALS SCIENCE↗

Synthesis Dependent Core Level Binding Energy Shift in the Oxidation State of Platinum Coated on Ceria–Titania and its Effect on Catalytic Decomposition of Methanol

Synergistic interaction of catalyst and support has attracted the interest of the catalytic community for several decades. The decomposition/oxidation of alcohols for the production of hydrogen as a source of fuel requires such support catalyst interaction. Recent studies have suggested the active role of oxide based supports on the catalytic ability of noble metals such as gold, platinum and palladium. Herein, we report the effect of synthesis technique on the catalytic activity of platinum coated on mixed ceria-titania support system. Wet impregnation technique followed by calcination was compared with the chemical reduction of platinum during the coating over oxide support. Methanol decomposition studied using an in-house built catalytic reactor coupled to a mass spectrometer showed that catalyst prepared by thermal reduction of platinum demonstrated better catalytic ability than the catalyst prepared by chemical reduction of platinum. Transmission electron microscopy revealed that the size of both platinum and ceria-titania particles remained unchanged, while the X-ray photoelectron spectroscopy (XPS) revealed that the oxidation state of platinum was modified by different coating procedures. A shift in the core level binding energy of the Pt 4f towards lower binding energy was observed with chemical reduction. Based on the XPS data it was found that platinum (on ceria-titania supports) in mixed oxidation state outperformed the Pt in reduced metallic state. Results from catalysis and in situ Fourier transform infra red spectroscopy are presented and discussed.

08 HYDROGEN↗

Efficient photocatalytic hydrogen generation by silica supported and platinum promoted titanium dioxide

Graphical abstract: Titanium dioxide was supported on mesoporous silica and promoted with Pt and Ru. The supported photocatalysts show high surface area and better photocatalytic activity in visible light as compared to the benchmark Degussa P25. These photocatalysts were characterized using XRD, BET-SA, and UV-DRS techniques. The surface area of supported photocatalyst was 140.6 m{sup 2}/g which is higher than Degussa P-25. Supported photocatalyst was evaluated for hydrogen evolution via water splitting reaction using ethanol as a sacrificial donor. Hydrogen yield observed is 4791.43 μmol/h/g of TiO{sub 2} and that for P-25 is 161 μmol/h/g of TiO{sub 2} under visible light irradiation. The value is 30 times higher than benchmark material Degussa P-25. This photocatalyst is also found stable up to 24 h without replenishing with sacrificial donor ethanol. - Highlights: • Semiconductor titanium dioxide has been supported on silica gel and promoted with Pt by simple wet impregnation route. • This synthesized photocatalyst is showing high surface area of 140.6 m{sup 2}/g with crystallite size in the range of 15.44 Å. • This photocatalyst is showing enhanced hydrogen yield of about 4791.43 μmol/h/g of TiO{sub 2}. • This photocatalyst is also found stable up to 24 h without replenishing with sacrificial donor ethanol. • The effect of various operating parameters on supported photocatalyst also has been studied. - Abstract: Titanium dioxide was supported on mesoporous silica and promoted with Pt and Ru. The supported photocatalysts show high surface area and better photocatalytic activity in visible light as compared to the benchmark Degussa P25. These photocatalysts were characterized using XRD, BET-SA, and UV-DRS techniques. The surface area of supported photocatalyst was 140.6 m{sup 2}/g which is higher than Degussa P-25. Supported photocatalyst was evaluated for hydrogen evolution via water splitting reaction using ethanol as a sacrificial donor. Hydrogen yield observed is 4791.43 μmol/h/g of TiO{sub 2} and that for P-25 is 161 μmol/h/g of TiO{sub 2} under visible light irradiation. The value is 30 times higher than benchmark material Degussa P-25. This photocatalyst is also found stable up to 24 h without replenishing with sacrificial donor ethanol. However silica gel/TiO{sub 2}/Ru does not show any exciting result for hydrogen generation. The effect of various operating parameters like photocatalyst loading, Illumination time and intensity of light on supported photocatalyst also has been studied.

36 MATERIALS SCIENCE↗

Enterococcus faecalis α1–2‐mannosidase (EfMan‐I): an efficient catalyst for glycoprotein N‐glycan modification

While multiple α 1–2‐mannosidases are necessary for glycoprotein N‐glycan maturation in vertebrates, a single bacterial α1–2‐mannosidase can be sufficient to cleave all α1–2‐linked mannose residues in host glycoprotein N‐glycans. We report here the characterization and crystal structure of a new α1–2‐mannosidase (EfMan‐I) from Enterococcus faecalis , a Gram‐positive opportunistic human pathogen. EfMan‐I catalyzes the cleavage of α1–2‐mannose from not only oligomannoses but also high‐mannose‐type N‐glycans on glycoproteins. Its 2.15 Å resolution crystal structure reveals a two‐domain enzyme fold similar to other CAZy GH92 mannosidases. An unexpected potassium ion was observed bridging two domains near the active site. These findings support EfMan‐I as an effective catalyst for in vitro N‐glycan modification of glycoproteins with high‐mannose‐type N‐glycans.

Li, Yanhong↗

Spatio-temporal heterogeneity in soil water stable isotopic composition and its ecohydrologic implications in semiarid ecosystems

Spatio-temporal heterogeneity in soil water content is recognized as a common phenomenon, but heterogeneity in the hydrogen and oxygen isotope composition of soil water, which can reveal processes of water cycling within soils, has not been well studied. New advances are being driven by measurement approaches allowing sampling with high density in both space and time. Using in situ soil water vapour probe techniques, combined with conventional soil and plant water vacuum distillation extraction, we monitored the hydrogen and oxygen stable isotopic composition of soil and plant waters at paired sites dominated by grasses and Gambel's oak ( Quercus gambelii ) within a semiarid montane ecosystem over the course of a growing season. We found that sites spaced only 20 m apart had profoundly different soil water isotopic and volumetric conditions. We document patterns of depth- and time-explicit variation in soil water isotopic conditions at these sites and consider mechanisms for the observed heterogeneity. We found that soil water content and isotopic variability were damped under Q. gambelii , perhaps due in part to hydraulic redistribution of deep soil water or groundwater by Q. gambelii in these soils relative to the grass-dominated site. We also found some support for H isotope discrimination effects during water uptake by Q. gambelii . In this ecosystem, the soil water content was higher than that at the neighbouring Grass site, and thus, 25% more water was available for transpiration by Q. gambelii compared with the Grass site. This work highlights the role of plants in governing soil water variation and demonstrates that they can also strongly influence the isotope ratios of soil water. The resulting fine-scale heterogeneity has implications for the use of isotope tracers to study soil hydrology and evaporation and transpiration fluxes to improve understanding of water cycling through the soil–plant–atmosphere continuum.

54 ENVIRONMENTAL SCIENCES↗

Design and analysis of a plasmonic demultiplexer based on band-stop filters using double-nanodisk-shaped resonators

In this paper, a two-channel plasmonic wavelength demultiplexer (PWDM) based on band-stop filters (BSF) using double-nanodisk-shaped resonators is proposed. The structure is numerically simulated using finite difference time domain method. First, a BSF is considered for modeling which supports three modes. Then, the effect of various structural parameters of the proposed PWDM is studied on the transmission properties in detail. The results show that the transmission properties of our PWDM are highly dependent on geometric parameters. The proposed structure provides a single-mode spectrum on each of the output ports with a maximum quality factor as high as 105 (FWHM = 7.7 nm). To this end, we illustrate that the concerning published research in this field, the significant privilege of our proposed PWDM structure is in terms of its good transmission efficiency, lowest FWHM and highest quality factor. Hence, such an arrangement is easy to fabricate and it has the potential for use in all-optical ultra-compact circuits and devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A New Approach to Multivariate Network Traffic Analysis

© 2019, Springer Science+Business Media, LLC & Science Press, China. Network traffic analysis is one of the core functions in network monitoring for effective network operations and management. While online traffic analysis has been widely studied, it is still intensively challenging due to several reasons. One of the primary challenges is the heavy volume of traffic to analyze within a finite amount of time due to the increasing network bandwidth. Another important challenge for effective traffic analysis is to support multivariate functions of traffic variables to help administrators identify unexpected network events intuitively. To this end, we propose a new approach with the multivariate analysis that offers a high-level summary of the online network traffic. With this approach, the current state of the network will display patterns compiled from a set of traffic variables, and the detection problems in network monitoring (e.g., change detection and anomaly detection) can be reduced to a pattern identification and classification problem. In this paper, we introduce our preliminary work with clustered patterns for online, multivariate network traffic analysis with the challenges and limitations we observed. We then present a grid-based model that is designed to overcome the limitations of the clustered pattern-based technique. We will discuss the potential of the new model with respect to the technical challenges including streaming-based computation and robustness to outliers.

Kim, Jinoh↗

Analysis of Microstructure and Sliding Wear Behavior of Co{sub 1.5}CrFeNi{sub 1.5}Ti{sub 0.5} High-Entropy Alloy

Α Co{sub 1.5}CrFeNi{sub 1.5}Ti{sub 0.5} high-entropy alloy (HEA) of the well-known family of CoCrFeNiTi has been designed using empirical parameters. The aim of this design was the production of a HEA with fcc structure that gives ductile behavior and also high strength because of the solid solution effect. The VEC calculations (8.1) supported the fcc structure while the δ factor calculations (4.97) not being out of the limit values, advised a significant lattice distortion. From the other hand, the ΔΗ{sub mix} calculations (− 9.64 kJ/mol) gave strong indications that no intermetallic would be formed. In order to investigate its potential application, the Co{sub 1.5}CrFeNi{sub 1.5}Ti{sub 0.5} HEA was prepared by vacuum arc melting and a primary assessment of its surface degradation response was conducted by means of sliding wear testing using different counterbody systems for a total sliding distance of 1000 m. An effort to correlate the alloy’s wear response with the microstructural characteristics was attempted. Finally, the wear behavior of the Co{sub 1.5}CrFeNi{sub 1.5}Ti{sub 0.5} HEA was compared with that of two commercially used wear-resistant alloys. The results obtained provided some first signs of the high-entropy alloys’ better wear performance when tested under sliding conditions against a steel ball.

36 MATERIALS SCIENCE↗

Thermo-hydraulic steam pipe models for district heating simulations: Simplifications to balance accuracy and simulation speed

Steam piping networks are essential for optimizing performance in industrial processes and district heating systems. However, dynamic models that balance thermo-hydraulic accuracy with computational efficiency remain limited. In response, this paper presents a new discretized steam pipe model based on the plug flow approach, capturing key thermo-hydraulic behaviors while simplifying steam phase change processes. Implemented in Modelica, the model accurately calculates temperature and pressure distributions along steam pipelines. To improve computational efficiency for district-scale simulations, five model simplifications are introduced: lumped thermo-hydraulic functions, empirical correlations, fluid state approximations, steady-state dynamics and inclusion of flow derivatives. These simplified models achieve 85%-98% accuracy in predicting pressure drop and condensation losses, including dynamic condensate behavior during pipe warm-up—a factor often overlooked in existing models. The models support diverse network configurations, scaling effectively to systems with multiple distribution pipes and connected building loads. Discrete models provide detailed insights but exhibit a cubic increase in simulation time as the network scales by N connected building O(N 2.42 ). In contrast, lumped models simulate 10–28 times faster than discrete, offering quadratic scaling of simulation time O(N 1.73 ). However, they still require 6 times more computation time than a lossless network, highlighting the inherent computational challenges of modeling compressible fluid flow. In conclusion, the steady-state lumped variant, with its near-linear scalability in computational time O(N 1.01 ), emerges as an efficient solution for preliminary design evaluations and extensive parametric studies.

15 GEOTHERMAL ENERGY↗

Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.

54 ENVIRONMENTAL SCIENCES↗