Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Understanding the role of water-soluble guar gum binder in reducing capacity fading and voltage decay of Li-rich cathode for Li-ion batteries

The practical application of high-capacity Li-rich cathode materials is hindered by capacity fading and voltage decay. The capacity fading and voltage decay could be effectively overcome by using water-soluble guar gum (GG) binder instead of traditional polyvinylidene fluoride (PVDF). However, the specific role of the GG binder is not clear yet, though the GG binder can significantly improve the electrochemical performance of Li-rich cathode. To understand the effect of GG binder on the morphology, microstructure of electrode and electrode/electrolyte interfaces, ex-situ scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray adsorption near edge spectroscopy (XANES), in-situ electrochemical impedance spectroscopy (EIS) were applied to comparatively study the charge-discharge processes of Li-rich Li 1.2 Ni 0.2 Mn 0.6 O 2 cathode when using GG and PVDF as binders. The results indicate that the GG binder can prevent electrode crack and active material loss, ascribing to the strong mechanical adhesion of GG binder with active material particles and current collector. It has found that the GG binder can also induce the formation of a uniform layer on Li 1.2 Ni 0.2 Mn 0.6 O 2 particles’ surface. As a consequence, both the electrolyte decomposition and the electrode corrosion were significantly inhibited. The strong chelation between Mn 2+ and polar OH group restrain Mn ion dissolution, which contributes to surface structural transformation mitigation. Here, our study reveals the role of water-soluble GG binder in reducing capacity fading and voltage decay of Li-rich material and is of great importance in design functional binders for high-performance Li-rich electrodes.

25 ENERGY STORAGE↗
DOE OSTI2018

Measurement of the vapor layer under a dynamic Leidenfrost drop

To understand the Leidenfrost phenomenon, which is the results of formation of a thin vapor layer, the progression of the vapor should be analyzed. However, due to the limitation of measuring techniques, the empirical measurement of the vapor layer under a dynamic Leidenfrost drop as a function of time has not been reported because the vapor is only tens of micrometers thick and forms within a tenth of a millisecond. Therefore, this paper presents a synchrotron X-ray imaging with the precise resolution to overcome the limitation of previous measurement technique. The liquid-vapor interfacial behavior of a drop of ethanol that is being levitated above a flat SiO 2 surface by the Leidenfrost phenomenon is analyzed depending on surface temperature. Measurements suggest that a thin (< 2 μm) vapor layer develops between the surface and the drop; i.e. that the liquid does not contact the solid. The measured thickness of this vapor layer under a dynamic Leidenfrost drop was less than the thickness of the vapor layer estimated by analytical solution of a model of vapor layer thickness for a static Leidenfrost drop. As a result, the new technique presented in this study will support transient numerical simulations or an analytical solution of the vapor layer under a dynamic Leidenfrost drop, and may have applications in research on the effects of artificial surface structure on the Leidenfrost phenomenon.

42 ENGINEERING↗
DOE OSTI2020

Detecting an underground tunnel by applying joint traveltime and waveform inversion

Underground tunnel and void detection is a challenging geophysical problem, and many methods have been proposed. Seismic techniques are promising because of the large seismic velocity contrasts between the air-filled void and the surrounding sediment and concrete. We apply a joint seismic traveltime and waveform inversion method to image a buried tunnel with concrete walls and a void space inside. The joint inversion images the top of the concrete tunnel as a high-velocity anomaly and the void space as a low-velocity anomaly. The location of the velocity anomalies predicted by the method agrees with the known location of the tunnel. As a comparison, the stand-alone full waveform inversion is also applied to the data. The first-arrival traveltime tomography shows weak nonlinearity but fails to image the hidden low-velocity layer. Full waveform inversion is able to image complex near-surface structures, but fitting waveforms may not honor the traveltime fit, especially when the data contain noise. Synthetic and real data tests show that the joint inversion method retains the advantages of both traveltime inversion and full waveform inversion and overcomes their respective drawbacks at the same time. The field example shows the joint inversion provides a better reconstruction of the high-velocity feature representing the top of the concrete wall in terms of its magnitude and location.

58 GEOSCIENCES↗
DOE OSTI2016

Growth of encapsulating carbon on supported Pt nanoparticles studied by in situ TEM

Carbon deposition on MgO-supported Pt nanoparticles from ethylene decomposition was explored by in situ transmission electron microscopy (TEM) at the atomic level. An imaging strategy was established for controlling beam-gas-sample interactions that minimizes beam-induced changes of the reaction. Using this strategy, it was possible to observe how carbon encapsulation occurs on Pt nanoparticles and the role of the Pt surface morphology. The evidence indicates that multiple partial layers grew simultaneously prior to full encapsulation of the nanoparticle. The growth of carbon on Pt nanoparticles was discovered to induce significant changes in the nanoparticle shape, resulting in particles becoming rounder as coking progressed. Closer examination of the surface structure revealed that in some cases carbon growth induced step formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Understanding photocatalytic overall water splitting on CoO nanoparticles: Effects of facets, surface stoichiometry, and the CoO/water interface

Unlike CoO micropowder, which is unable to split water, CoO nanoparticles have been observed to photocatalytically split water into H 2 and O 2 at room temperature without an externally applied potential or co-catalyst. The photocatalytic activity of CoO nanoparticles has been suggested to stem from an upwards shift in the band edges relative to bulk CoO such that the conduction and valence band edges span the water redox potentials. However, the origin of this shift in the band edges is unknown. In this study, we use first-principles density functional theory (DFT) calculations to explore the thermodynamically stable surface configurations of CoO as a function of oxygen chemical potential. Here we show that the band edge positions are sensitive to surface chemistry which is determined by surface orientation, adsorbates, and stoichiometry, and thus growth conditions and operating environment. In particular, we predict that CoO nanoparticles have fully hydroxylated CoO(1 1 1) facets, with band edges spanning the water redox potentials, while larger CoO particles (such as CoO micropowders) have a full monolayer of hydrogen on the CoO(1 1 1) facets, with a band alignment that favors water oxidation but not water reduction. Furthermore, we demonstrate that explicit inclusion of liquid water is crucial for accurately predicting the band edge positions, and thus photocatalytic behavior, of CoO in an aqueous solution. Our work explains why photocatalytic overall water splitting has only been observed on CoO nanoparticles, and provides new insights into the relationships between environmental conditions, surface structure, and band alignment, which may lead to new approaches for optimizing activity in CoO and other oxide photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Revisiting the capacity-fading mechanism of P2-type sodium layered oxide cathode materials during high-voltage cycling

We report P2-type sodium layered oxide cathode (Na 2/3 Ni 1/3 Mn 2/3 O 2 , P2-NNMO) has attracted great attention as a promising cathode material for sodium ion batteries because of its high specific capacity. However, this material suffers from a rapid capacity fade during high-voltage cycling. Several mechanisms have been proposed to explain the capacity fade, including intragranular fracture caused by the P2-O2 phase transion, surface structural change, and irreversible lattice oxygen release. Here we systematically investigated the morphological, structural, and chemical changes of P2-NNMO during high-voltage cycling using a variety of characterization techniques. It was found that the lattice distortion and crystal-plane buckling induced by the P2-O2 phase transition slowed down the Na-ion transport in the bulk and hindered the extraction of the Na ions. The sluggish kinetics was the main reason in reducing the accessible capacity while other interfacial degradation mechanisms played minor roles. Our results not only enabled a more complete understanding of the capacity-fading mechanism of P2-NNMO but also revealed the underlying correlations between lattice doping and the moderately improved cycle performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Functional properties of Yttrium Iron Garnett thin films on graphene-coated Gd 3 Ga 5 O 12 for remote epitaxial transfer

Remote epitaxial growth via a graphene interlayer and subsequent mechanical exfoliation of a free-standing membrane is a recently developed technique used to transfer complex oxide thin films onto non-native substrates to form heterogeneously integrated structures for various device applications. One such oxide is Yttrium Iron Garnet (YIG), a material of choice for a wide range of magnetoelectric and spintronic devices owing to its strong magnetic properties and low microwave losses. YIG is predominantly grown on lattice matched Gadolinium Gallium Garnet (GGG) substrates, but by utilizing the remote epitaxy technique, high quality YIG films can be transferred from GGG onto another substrate such as piezoelectric Lithium Niobate (LN). Mechanical strain coupling between the layers and magnetostrictive nature of YIG would allow for the investigation of the interplay in YIG/LN structures leading to the design of novel frequency agile magneto-acoustic devices. In this study functional properties of a YIG film grown using PLD on graphene-coated GGG substrate were investigated and compared to traditional YIG on GGG. Both materials were characterized in terms of crystal structure, surface morphology, FMR and Gilbert damping, and Raman and XAS spectroscopy. Further, it was found that YIG on graphene-coated GGG exhibits significantly higher microwave losses than standard YIG on GGG (FMR linewidth 30.9 vs 2.1 Oe at 10 GHz, and Gilbert damping coefficient 15.4x10 -4 vs 3.4x10 -4 respectively), which was attributed to increased concentration of Fe 2+ cations in YIG/Graphene/GGG. While the damping is higher in these studied films compared to YIG grown directly on GGG, the resulting properties are still very favorable compared to many other competing materials which can be grown without the need for lattice matched substrates, such as metallic ferromagnets.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Heterometallic metal-organic framework-templated synthesis of porous Co{sub 3}O{sub 4}/ZnO nanocage catalysts for the carbonylation of glycerol

The efficient synthesis of glycerol carbonate (GLC) has recently received great attention due to its significance in reducing excess glycerol in biodiesel production as well as its promising applications in several industrial fields. However, the achievement of high conversion and high selectivity of GLC from glycerol in heterogeneous catalytic processes remains a challenge due to the absence of high-performance solid catalysts. Herein, highly porous nanocage catalysts composed of well-mixed Co{sub 3}O{sub 4} and ZnO nanocrystals were successfully fabricated via a facile heterometallic metal-organic framework (MOF)-templated synthetic route. Benefiting from a high porosity and the synergistic effect between Co{sub 3}O{sub 4} and ZnO, the as-prepared composite catalysts exhibited a significantly enhanced production efficiency of GLC in the carbonylation reaction of glycerol with urea compared to the single-component counterparts. The yield of GLC over the Co{sub 50}Zn{sub 50}-350 catalyst reached 85.2%, with 93.3% conversion and near 91% GLC selectivity, and this catalytic performance was superior to that over most heterogeneous catalysts. More importantly, the proposed templated synthetic strategy of heterometallic MOFs facilitates the regulation of catalyst composition and surface structure and can therefore be potentially extended in the tailoring of other metal oxide composite catalysts. - Graphical abstract: Highly porous Co{sub 3}O{sub 4}/ZnO nanocages were fabricated via a heterometallic MOF-templated route and exhibited a significantly enhanced photocatalytic performance in the production of glycerol carbonate. Display Omitted - Highlights: • Porous Co{sub 3}O{sub 4}/ZnO nanocages were synthesized by a facile thermolysis route of heterometallic MOFs. • The as-prepared nanocages possessed massive pores and Co{sub 3}O{sub 4}/ZnO heterojunctions. • The Co{sub 3}O{sub 4}/ZnO ratio in the composites was easily adjusted by tuning the Co/Zn ratio in the precursors. • The composite catalysts exhibited a significantly enhanced production efficiency of glycerol carbonate in the carbonylation reaction of glycerol with urea.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

A facile approach to prepare graphene via solvothermal reduction of graphite oxide

Highlights: • Graphene was prepared via a novel and facile solvothermal reduction method for graphite oxide. • Most of the oxygen functional groups of graphite oxide were removed. • The reduced graphene oxide obtained was featured with bilayer nanosheets. - Abstract: In this work, a facile reduction strategy is reported for the fabrication of graphene. Graphite oxide (GO) is reduced via a novel solvothermal reaction in a mixed solution of acetone and sodium hypochlorite (NaClO). The structure, surface chemistry, morphology and thermal stability of the as-prepared reduced graphene oxide (RGO) are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The results indicate that most of the oxygenated groups in GO are effectively removed in this solvothermal reaction. The novel reduction method provides a simple, cost-effective and efficient strategy for the fabrication of graphene.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Structural and vibrational investigations of Nb-doped TiO{sub 2} thin films

Highlights: • We studied the evolutions of structure for TiO{sub 2} thin film as changes with Nb doping and temperatures. • Up to 800 °C, the grain size of Nb{sub 0.1}Ti{sub 0.9}O{sub 2} is smaller than for pure TiO{sub 2} because doped Nb hinders the growth of the TiO{sub 2} grains. • There was no formation of the rutile phase at high temperature. • Nb doped TiO{sub 2} films have high electron densities at 400–700 °C. • Nb dope extends the absorbance spectra of TiO{sub 2} which leads to the band gap reduce. - Abstract: Acid-catalyzed sol–gel and spin-coating methods were used to prepare Nb-doped TiO{sub 2} thin film. In this work, we studied the effect of niobium doping on the structure, surface, and absorption properties of TiO{sub 2} by energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray reflectometry (XRR), X-ray photoelectron spectroscopy (XPS), Raman, and UV–vis absorption spectroscopy at various annealing temperatures. EDX spectra show that the Nb:Ti atomic ratios of the niobium-doped titania films are in good agreement with the nominal values (5 and 10%). XPS results suggest that charge compensation is achieved by the formation of Ti vacancies. Specific niobium phases are not observed, thus confirming that niobium is well incorporated into the titania crystal lattice. Thin films are amorphous at room temperature and the formation of anatase phase appeared at an annealing temperature close to 400 °C. The rutile phase was not observed even at 900 °C (XRD and Raman spectroscopy). Grain sizes and electron densities increased when the temperature was raised. Nb-doped films have higher electron densities and lower grain sizes due to niobium doping. Grain size inhibition can be explained by lattice stress induced by the incorporation of larger Nb{sup 5+} ions into the lattice. The band gap energy of indirect transition of the TiO{sub 2} thin films was calculated to be about 3.03 eV. After niobium doping, it decreased to 2.40 eV.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Control synthesis of bismuth sulphide films and their application for laser detectors

Highlights: • Bi{sub 2}S{sub 3} films have been synthesized via a facile hydrothermal process. • We fabricated Bi{sub 2}S{sub 3} films-based laser detectors successfully. • The photoelectric properties were studied upon 450 nm, 650 nm and 850 nm laser beam. • The laser detectors exhibit excellent photoconductive performance. • We found Prolonging the reaction time was beneficial for the photoelectric performance. - Abstract: Herein, we utilize a facile hydrothermal process for the synthesis of Bi{sub 2}S{sub 3} films on the SnO{sub 2}: F films (FTO) substrate. The structure, surface morphology and thickness of the samples were characterized by variously analysis method. The Bi{sub 2}S{sub 3} films-based laser detectors exhibit excellent linear photocurrent characteristics, good sensitivity to 450 nm, 650 nm and 850 nm laser beam. Prolonging the reaction time was beneficial for the photoelectric performance of the Bi{sub 2}S{sub 3} films-based laser detectors. The photoelectric conversion properties can be improved by optimizing the thickness of the films. The experimental results of this work can provide an additional opportunity for fabricating excellent photoconductive performance laser detectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

A stable and conductive interface is one of the decisive factors in manipulating the performance of high voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode for Li-ion batteries. Herein, a hybrid Li 3 PO 4 -TiO 2 coating layer is designed as an interfacial material via controllable atomic layer deposition (ALD) on LNMO. The coating acts not just as a physical barrier to prevent the side-reactions between cathode and electrolyte at high voltage, more importantly, the hybrid coating material improves both interfacial ionic and electronic conductivities to build facile Li-ion and electron diffusion pathways for LNMO. The optimized LNMO demonstrates improved rate capability and long-life stability. The capacity retention is 81.2% comparing with 47.4% of bare LNMO at 0.5C after 300 cycles. Detailed surface structural evolution is studied via X-ray absorption near edge spectroscopy and transmission electron microscopy. Furthermore, this work provides new insights of hybrid interfacial design via ALD and promotes novel electrode architectures for batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Fundamental flow characterization for LiCl–KCl molten salt natural circulation closed loop

Molten salt flow characterization presents numerous challenges due to the hostile environments that cause corrosion and erosion of instrumentation and structural components. To support future molten salt flow characterization under natural convection conditions, a LiCl–KCl eutectic molten salt loop was designed and constructed. The primary objective of this loop is to facilitate natural convection as the principal cooling mechanism, enabling insights into the physics behind natural convection in closed loops and serving as a baseline for loop dimensional and non-dimensional analyses. Here, this study summarizes the fundamental functions employed for flow characterization and introduces a model to estimate flow rate when intrusive instrumentation is unavailable. The approach relies solely on structural surface measurements to avoid flow disturbances. Furthermore, a comprehensive thermal–hydraulic analysis is included to deepen understanding of the system’s behavior.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Interactions in misaligned layered materials

The deliberate introduction of stacking faults has been found to induce properties markedly distinct from those of perfectly stacked particles or sheets, with even minute deviations leading to significant alterations in material characteristics. In this review article, we discuss the effects of stacking faults – both linear and rotational – on surface structures influencing ion adsorption, particle–particle affinity governing crystal growth, friction, and electronic properties. In conclusion, our comprehensive overview sheds light on the multifaceted impact of stacking faults on these phenomena, offering insights that bridge multiple disciplines, and provides numerous interdisciplinary research questions, paving the way for future innovations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In-situ and In-operando Cobalt Oxidation Studied by Atom Probe Tomography

Heterogeneous catalysis is one of the pillars of the chemical industry and the “green chemistry” concept. However, the sparse understanding of surface mechanisms at molecular scale impedes development of high-performance catalysts and requires development of new tools and methodologies. Cobalt is notably able to dissociate CO 2 into CO(g) and O 2 (g), allowing further conversion to higher value compounds such as long-chain hydrocarbons. Such application leads inevitably to Co surface oxidation. Finally, from its pure form (Co(0)) to oxidized ones (CoO and Co 3 O 4 ) the formation mechanism remains unclear as well as the surface structure evolution and its influence on the chemical reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Growth Mode Transition in Complex Oxide Heteroepitaxy: Atomically Resolved Studies

Here we performed investigations of the atomic-scale surface structure of epitaxial La 5/8 Ca 3/8 MnO 3 thin films as a model system dependent on growth conditions in pulsed laser deposition with emphasis on film growth kinetics. Postdeposition in situ scanning tunneling microscopy was combined with in operando reflective high-energy electron diffraction to monitor the film growth and ex situ X-ray diffraction for structural analysis. We find a correlation between the out-of-plane lattice parameter and both adspecies mobility and height of the Ehrlich–Schwoebel barrier, with mobility of adatoms greater over the cationically stoichiometric terminations. We find that the data suggest that the out-of-plane lattice parameter is dependent on the mechanism of epitaxial strain relaxation, which is controlled by the oxidative power of the deposition environment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Variable Surface Termination and Ligand Passivation of Lead Sulfide Nanocrystals Synthesized with Excess Lead Chloride

The surface termination and ligand passivation of semiconducting nanocrystals (NCs) impact the stability, optical properties, and self-assembly of NCs. In this work, we definitively characterize the surface of lead sulfide (PbS) NCs synthesized from excess PbCl 2 . With a combination of small-angle neutron scattering (SANS), photoluminescence, and 1D and 2D NMR experiments, we show that the surface termination of PbS NCs depends on the presence of PbCl 2 during ligand exchange. When excess PbCl 2 is removed prior to ligand exchange, PbS[RNH 3 + Cl – ] NCs are obtained, which are terminated by a monolayer of PbCl x on the {100} PbS facet and passivated by oleylammonium chloride ligands. On the other hand, when excess PbCl 2 remains in solution during ligand exchange, lead oleate forms and attaches to the {111} PbS facets of PbS[RNH 3 + Cl – ] NCs, creating PbS@PbCl x NCs. PbS@PbCl x NCs are coated in an epitaxial layer of PbCl x on both the {100} PbS and {111} PbS facets, making them 0.3–0.4 nm larger on average than PbS[RNH 3 + Cl – ] NCs with identical absorption wavelengths. Additionally, PbS@PbCl x NCs have a consistently higher photoluminescence quantum yield and longer photoluminescence lifetimes than PbS[RNH 3 + Cl – ] NCs. This study clarifies the surface structure of PbS NCs synthesized from excess PbCl 2 , highlighting ligand exchange strategies and reconciling observations from across the literature.

Anions↗
DOE OSTI2026

Bifunctional Electrocatalysts with High-Entropy Alloys: Bridging Hydrogen Evolution and Oxygen Reduction

High-entropy alloys (HEAs) have emerged as a promising class of bifunctional electrocatalysts capable of simultaneously driving the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) with high activity and durability. Their near-equiatomic multicomponent compositions give rise to unique physicochemical characteristics, including lattice distortion, sluggish diffusion, high-entropy stabilization, and pronounced electronic heterogeneity, that collectively generate diverse and synergistic active sites inaccessible in conventional alloys. This review summarizes recent progress in HEA-based bifunctional electrocatalysis, with a focus on the fundamental mechanisms governing HER and ORR activity, stability, and selectivity. We discuss advances in synthesis strategies, ranging from confined growth and step-alloying to scalable continuous-flow methods, that enable precise control over composition, size, and surface structure. Complementary computational and data-driven approaches, including density functional theory, machine-learning-assisted screening, and descriptor development, are highlighted as essential tools for navigating the vast HEA design space and establishing structure−property relationships. Particular attention is paid to adsorption-energy distributions, multisite cooperativity, and environmental effects under realistic electrochemical conditions. Finally, we outline current challenges and future opportunities for integrating mechanistic understanding with AI-guided, closed-loop design frameworks to accelerate the discovery of next-generation HEA bifunctional electrocatalysts for sustainable energy conversion.

Alloys↗