Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Visualization of Current and Mapping of Elements in Quantum Dot Solar Cells

The delicate influence of properties such as high surface state density and organic-inorganic boundaries on the individual quantum dot electronic structure complicates pursuits toward forming quantitative models of quantum dot thin films ab initio. Our report describes the application of electron beam-induced current (EBIC) microscopy to depleted-heterojunction colloidal quantum dot photovoltaics (DH-CQD PVs), a technique which affords one a map of current production within the active layer of a PV device. The effects of QD sample size polydispersity as well as layer thickness in CQD active layers as they pertain to current production within these PVs are imaged and explained. The results from these experiments compare well with previous estimations, and confirm the ability of EBIC to function as a valuable empirical tool for the design and betterment of DH-CQD PVs. Lastly, extensive and unexpected PbS QD penetration into the mesoporous TiO 2 layer is observed through imaging of device cross sections by energy-dispersive X-ray spectroscopy combined with scanning transmission electron microscopy. Finally, the effects of this finding are discussed and corroborated with the EBIC studies on similar devices.

14 SOLAR ENERGY↗

Ionic Liquid-Assisted Synthesis of TiO 2 -Carbon Hybrid Nanostructures for Lithium-Ion Batteries

Building nanocomposite architectures based on nanocarbon materials (such as carbon nanotubes and graphene nanosheets) and metal-oxide nanoparticles is of great interests for electrochemical energy storage. Here, an ionic-liquid-assisted strategy is presented to mediate the in situ growth of TiO 2 nanocrystals with controlled size on carbon nanotubes and graphene, and also reduce the modified carbon supports to recover the graphitic structure simultaneously. The as-prepared nanocomposites exhibit a highly porous and robust structure with intimate coupling between TiO 2 nanocrystals and carbon supports, which offers facile ion and electron transport pathway as well as high mechanical stability. Finally, when evaluated as electrode materials for lithium-ion batteries, the nanocomposites manifest high specific capacity, long cycling lifetime, and excellent rate capability, showing their promising application in high-performance energy storage devices.

25 ENERGY STORAGE↗

In‐Operando Spatiotemporal Imaging of Coupled Film‐Substrate Elastodynamics During an Insulator‐to‐Metal Transition

Abstract The drive toward non‐von Neumann device architectures has led to an intense focus on insulator‐to‐metal (IMT) and the converse metal‐to‐insulator (MIT) transitions. Studies of electric field‐driven IMT in the prototypical VO 2 thin‐film channel devices are largely focused on the electrical and elastic responses of the films, but the response of the corresponding TiO 2 substrate is often overlooked, since it is nominally expected to be electrically passive and elastically rigid. Here, in‐operando spatiotemporal imaging of the coupled elastodynamics using X‐ray diffraction microscopy of a VO 2 film channel device on TiO 2 substrate reveals two new surprises. First, the film channel bulges during the IMT, the opposite of the expected shrinking in the film undergoing IMT. Second, a microns thick proximal layer in the substrate also coherently bulges accompanying the IMT in the film, which is completely unexpected. Phase‐field simulations of coupled IMT, oxygen vacancy electronic dynamics, and electronic carrier diffusion incorporating thermal and strain effects suggest that the observed elastodynamics can be explained by the known naturally occurring oxygen vacancies that rapidly ionize (and deionize) in concert with the IMT (MIT). Fast electrical‐triggering of the IMT via ionizing defects and an active “IMT‐like” substrate layer are critical aspects to consider in device applications.

36 MATERIALS SCIENCE↗

Impact of Conformality and Crystallinity for Ultrathin 4 nm Compact TiO 2 Layers in Perovskite Solar Cells

The rapid rise in power conversion efficiencies of lead-based perovskite solar cells (PSCs) has established their promise, motivating scale-up and commercialization. As a thin film solar cell, interfacial properties are key to the performance of PSCs; there is a need to further understand which properties are important to control. Here, the impact of the compact TiO 2 (com-TiO 2 ) film properties on the performance of mesoporous PSCs is studied. Com-TiO 2 layers are fabricated by spray pyrolysis as well as by atomic layer deposition (ALD), using ALD as a proof-of-concept method to achieve highly conformal films of precisely controlled thickness. The com-TiO 2 layers’ conformality and surface roughness are examined by microscopy techniques; their relative crystallinity is studied by grazing-incidence X-ray diffraction with a synchrotron source and an in situ annealing chamber; and completed devices are analyzed by J–V and impedance spectroscopy techniques. The results show that an ultraconformal comTiO 2 layer can be thinned to 4 nm and match the performance of a ≈50 nm spray-pyrolysis TiO 2 layer. This work concludes that film conformality is the primary consideration for creating a high-performing com-TiO 2 layer, overriding any effects of flm crystallinity—a fnding that can guide fabrication choices for the scale-up of PSCs.

36 MATERIALS SCIENCE↗

Transitional Structures with Continuous Variations in Atomic Positions from Anatase to Rutile Improve Photocatalytic Activity

Abstract TiO 2 polymorphs have distinct properties that are widely employed in various applications. However, mechanisms of transformations between these polymorphs are not fully understood, especially at atomic scale, inhibiting advancing the design and application of the transitional phases. Here, based on results from semi‐in situ transmission electron microscopy, density functional theory, and X‐ray photoemission experiments, a physical picture of transitional structures is discovered, in which continuous variations in atomic positions form along a previously unreported anatase‐to‐rutile phase transformation path of [010] A –to–[] R and (004) A –to– (011) R . These gradient structures give rise to continuous band bending, which promotes electron‐hole separation and inhibits their recombination across the bulk of the particles, leading to a large functionally active volume fraction and resulting in high photoactivity. These findings suggest that interphase matter based on extended gradient structures can be designed to advance new functions not achievable using abrupt interfaces.

36 MATERIALS SCIENCE↗

Refractive Index and Abbe Number Tuning via 3D Printable Optical Quality Silica–Titania–Germania Glasses

The development of optical quality GeO 2 –TiO 2 –SiO 2 glasses compatible with direct ink writing (DIW) 3D printing is reported in this study. Colloidal GeO 2 and TiO 2 –SiO 2 core–shell feedstocks are prepared by a sol–gel method and converted to printable inks for DIW. Printed inks are subsequently densified to glass using heat treatment at temperatures up to 1100 °C in air. A series of print‐compatible glass compositions are prepared, yielding transparent glass with the highest refractive index n = 1.576. Herein, it is shown that more TiO 2 can be incorporated into the glass without haziness or scattering through the addition of GeO 2 . The mechanisms for this are discussed, and it is shown that crystallization persists in these glasses despite the lack of visible light scattering. Finally, the combination of both TiO 2 and GeO 2 into a ternary glass also is used to independently tune the dispersion properties of the glass, as demonstrated by measured refractive indices and Abbe numbers, which has potential implications for 3D‐printed optics.

36 MATERIALS SCIENCE↗

Resolving Hysteresis in Perovskite Solar Cells with Rapid Flame-Processed Cobalt-Doped TiO 2

To further increase the open–circuit voltage ( V oc ) of perovskite solar cells (PSCs), many efforts have been devoted to doping the TiO 2 electron transport/selective layers by using metal dopants with higher electronegativity than Ti. However, those dopants can introduce undesired charge traps that hinder charge transport through TiO 2 , so the improvement in the V oc is often accompanied by an undesired photocurrent density–voltage ( J–V ) hysteresis problem. Herein, it is demonstrated that the use of a rapid flame doping process (40 s) to introduce cobalt dopant into TiO 2 not only solves the J–V hysteresis problem but also increases the V oc and power conversion efficiency of both mesoscopic and planar PSCs. The reasons for the simultaneous improvements are two fold. First, the flame–doped Co–TiO 2 film forms Co–O v (cobalt dopant–oxygen vacancy) pairs and hence reduces the number density of Ti 3+ trap states. Second, Co doping upshifts the band structure of TiO 2 , facilitating efficient charge extraction. As a result, for planar PSCs, the flame doping of Co increases the efficiency from 17.1% to 18.0% while reducing the hysteresis from 16.0% to 1.7%. Here, for mesoscopic PSCs, the flame doping of Co increases the efficiency from 18.5% to 20.0% while reducing the hysteresis from 7.0% to 0.1%.

36 MATERIALS SCIENCE↗

Atomic Gradient Structures: Atomic Gradient Structure Alters Electronic Structure in 3D across the Bulk and Enhances Photoactivity

Understanding structure–function relationships enables the design of materials with tailored functionalities. The long-standing challenge is to design materials with high active volume to improve the efficiency. Tailored grain boundaries and lattice defects are traditionally used to tune the electronic structure near interfaces or defects to promote electron and hole separation. However, the active volume of point defect sites or interfaces in these traditional photocatalysts is extremely low. In this work, we report a structure with continuous atomic positional deformation across the bulk, altering the electronic structure in three-dimension and creating a significantly high active volume. Such a structure in anatase is obtained and tuned by phase transformation during heating process. Transmission electron microscopy and density functional theory results reveal that atomic deformations result in continuous band bending across the particles, facilitating electron–hole separation, inhibiting their recombination, and inducing dramatically enhanced photoactivity. These findings enable a different materials design paradigm that can potentially be harnessed for a broad range of applications.

TiO2↗

In Situ Dispersion of Palladium on TiO 2 During Reverse Water–Gas Shift Reaction: Formation of Atomically Dispersed Palladium

The application of single-atom catalysts (SACs) to high-temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. Here, we show that Pd can be predominantly dispersed as isolated atoms onto TiO 2 during the reverse water-gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO 2 surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO 2 ) with neat TiO 2 prior to the rWGS reaction. Furthermore, the in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X-ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high-temperature rWGS conditions is associated with Pd-Ti coordination, which manifests upon O-vacancy formation and the artificial increase in TiO 2 surface area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO 2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Abstract Titanium dioxide (TiO 2 ) is considered a promising anode material for high‐power lithium ion batteries (LIBs) because of its low cost, high thermal/chemical stability, and good safety performance without solid electrolyte interface formation. However, the poor electronic conductivity and low lithium ion diffusivity of TiO 2 result in poor cyclability and lithium ion depletion at high current rates, which hinder them from practical applications. Herein we demonstrate that hierarchically structured TiO 2 microboxes with controlled internal porosity can address the aforementioned problems for high‐power, long‐life LIB anodes. A self‐templating method for the synthesis of mesoporous microboxes was developed through Na 2 EDTA‐assisted ion exchange of CaTiO 3 microcubes. The resulting TiO 2 nanorods were organized into microboxes that resemble the microcube precursors. This nanostructured TiO 2 material has superior lithium storage properties with a capacity of 187 mAh g −1 after 300 cycles at 1 C and good rate capabilities up to 20 C.

Gao, Xuehui↗

A Surface-Strained and Geometry-Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

A surface-strained and geometry-optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 -based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h -1 cm -2 (16.67 μg h -1 mg cat -1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Furthermore, our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic Tug-of-War between Pt and Leaky TiO 2 : Positive and Negative Effects on the Function of Molecularly-Modified p -Si(111)|TiO 2 |Pt Photocathodes

Photoelectrochemical solar energy conversion to chemical products is a promising avenue towards renewable fuels, and TiO 2 deposition on semiconductor photocathodes is a widespread surface protection strategy. However, the electronic, thermodynamic, and kinetic effects of protection layers on interfacial energetics remains poorly understood. Here, electrochemical data (photocurrent onset and flatband potentials) of p-Si(111)|TiO 2 |Pt is collected in contact with an outer-sphere redox couple. We find that onset potentials shift negatively as a function of increasing oxide thickness, but this effect is not reflected in the flatband potentials. This reveals the mechanism of these shifts is kinetic rather than thermodynamic,and suggests that hole leakage through the TiO 2 is responsible. When Pt nanoparticles are deposited onto the TiO 2 , positive shifts in both the onset and flatband potentials are observed, revealing Pt catalysts are beneficial for more than just increased catalytic rates. These results highlight the importance of understanding the effects of surface modifications on the energetics at the interface in both catalytic and simple electron transfer systems.

14 SOLAR ENERGY↗

Ionothermal Synthesis of Carbon/TiO 2 Nanocomposite for Supercapacitors

A facile in-situ ionothermal strategy is designed to synthesize carbon/oxide composites with nanoporous structure. Ionic liquids play key roles in this ionothermal method as the solvents, porous structure directing templates and carbon sources. Here, the interaction between ionic liquids and oxides greatly improves the carbon yield of ionic liquids from nearly 0 to 18 wt.%. With the synergistic effects of the high electrical conductivity of the nitrogen-rich carbon species and the Ti 3+ self-doping enhanced electrical conductivity of TiO 2 , C/TiO 2 -4 composite exhibits better electrochemical performance than C/SiO 2 and C/Nb 2 O 5 do as a supercapacitor electrode material, delivering a high specific capacitance of 152.4 F g -1 at 5 mV s -1 with good capacitance retentions of 84.7%, 72.2% and 46.0% at 30, 100 and 500 mV s -1 , respectively.

36 MATERIALS SCIENCE↗

Preparation and Photocatalytic Hydrogen Production of TiO 2 /(AlMnCoNiZn) 3 O 4 Nanocomposites

Photocatalytic water splitting is a promising strategy for addressing the global energy crisis and environmental pollution. In this study, spinel-type high-entropy oxide (HEO) nanoparticles, (AlMnCoNiZn) 3 O 4 , were successfully synthesized via a solution combustion method. TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites with varying molar ratios were subsequently fabricated through solid-state sintering, and their photocatalytic water-splitting performance was systematically investigated. The hydrogen production rate initially increased and then decreased with increasing TiO 2 content. The optimal nanocomposite achieved a hydrogen evolution rate of 1450 μmol·h −1 ·g −1 under simulated sunlight irradiation, which is 2.2 times higher than that of pure TiO 2 nanoparticles. In addition, the TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites exhibited significantly improved photocorrosion resistance compared with TiO 2 nanoparticles. After 12 h irradiation under a 500-W high-pressure mercury lamp, the hydrogen production rates of the nanocomposites and pure TiO 2 retained 79.3% and 5.47% of their initial values, respectively. These results demonstrate the important role of (AlMnCoNiZn) 3 O 4 and other HEOs in enhancing the photocatalytic performance of nanoheterojunction catalysts. Lastly, this work broadens the potential applications of (AlMnCoNiZn) 3 O 4 and related HEO materials in the field of photocatalysis.

Heterojunction↗

Understanding the Photocatalytic Properties of Pt/CeO x /TiO 2 : Structural Effects on Electronic and Optical Properties

Ceria-titania interfaces play a crucial role in different chemical processes but are especially promising for the photocatalytic splitting of water using light in the visible wavelength region when Pt is added to the system. Yet, the complexity of this hierarchical structure hampers the study of the origin of its outstanding properties. In this article, the structural, electronic and optoelectronic properties of CeO 2 /TiO 2 systems containing 1D, 2D, and 3D particles of ceria are analyzed by means of density functional calculations. Adsorption sites and vacancy effects have been studied to model Pt adsorption. Density of states calculations and absorption spectra simulations explain the behavior of these systems. Conclusively, these models are used for the screening of other metals that can be combined with this heterostructure to possibly find more efficient water splitting photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Surface Terminations on the Initial Stages of TiO 2 Deposition on Functionalized Silicon

As atomic layer deposition (ALD) emerges as a method to fabricate architectures with atomic precision, emphasis is placed on understanding surface reactions and nucleation mechanisms. ALD of titanium dioxide with TiCl 4 and water has been used to investigate deposition processes in general, but the effect of surface termination on the initial TiO 2 nucleation lacks needed mechanistic insights. Here, this work examines the adsorption of TiCl 4 on Cl–, H–, and HO– terminated Si(100) and Si(111) surfaces to elucidate the general role of different surface structures and defect types in manipulating surface reactivity of growth and non-growth substrates. The surface sites and their role in the initial stages of deposition are examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Density functional theory (DFT) computations of the local functionalized silicon surfaces suggest oxygen-containing defects are primary drivers of selectivity loss on these surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Feasibility of Polaronic OER on (110) Surface of Rutile TiO 2

The polaronic effects at the atomic level hold paramount significance for advancing the efficacy of transition metal oxides in applications pertinent to renewable energy. The lattice–distortion mediated localization of photoexcited carriers in the form of polarons plays a pivotal role in the photocatalysis. This investigation focuses on rutile TiO 2 , an important material extensively explored for solar energy conversion in artificial photosynthesis, specifically targeting the generation of green H 2 through photoelectrochemical (PEC) H 2 O splitting. By employing Hubbard-U corrected and hybrid density functional theory (DFT) methods, we systematically probe the polaronic effects in the catalysis of oxygen evolution reaction (OER) on the (110) surface of rutile TiO 2 . Theoretical understanding of polarons within the surface, coupled with simulations of OER at distinct titanium (Ti) and oxygen (O) active sites, reveals diverse polaron formation energies within the lattice sites with strong preference for bulk and surface bridge (O b ) oxygen sites. Moreover, we provide the evidence for the facilitative role of polarons in OER. Here, we find that hole polarons situated at the equatorial oxygen sites near the Ti–active site, along with bridge site hole polarons distal from the O b active site yield a small reduction in OER overpotential by ~0.06 eV and ~0.12 eV, respectively. However, subsurface, equatorial, and bridge site hole polarons significantly reduce the Ti-active site OER overpotential by ~0.4 eV through the peroxo–type oxygen pathway. We also observe that the presence of hole polarons stabilizes the *OH, *O, and *OOH intermediate species compared to the scenario without hole polarons. Overall, this study provides a detailed mechanistic insight into polaron–mediated OER, offering a promising avenue for improving the catalytic activity of transition metal oxide-based photocatalysts catering to renewable energy requisites.

14 SOLAR ENERGY↗

Alignment frustration in block copolymer films with block copolymer grafted TiO 2 nanoparticles under soft-shear cold zone annealing

Block copolymers (BCPs) have received significant attention as promising candidates for sequestering nanoparticles and fabrication of aligned nanostructures with optimal optical or electrical properties. We investigate the influence of static and dynamic thermal field on the alignment of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) BCP morphology with the loading of novel poly(methyl methacrylate-block-Polystyrene) (PMMA-b-PS)-grafted-TiO 2 nanoparticles (BCP-g-TiO 2 ). Observation of characteristics IR peaks for PMMA and PS in BCP-g-TiO 2 nanoparticles and Transmission Electron Microscopy (TEM) results of the outer coating of core nanoparticle, validate the grafting to approach in synthesizing BCP-g-TiO 2 . In this work, we report that under the sharp dynamic thermal field, at low loading of BCP-g-TiO 2 , there is good dispersion of nanoparticles in unidirectionally aligned BCP matrix in film interior probed by GISAXS, while, at high nanoparticle loading (~10 wt%), there is local frustration in the unidirectional alignment of the BCP matrix due to aggregation of BCP-g-TiO 2 nanoparticles. However, Grazing incidence small angle X-ray scattering (GISAXS) shows clearly that the BCP films remain largely locally ordered at the domain scale, despite these large perturbations to long-range ordering even at high loading level, while bringing in new TiO 2 functionality to the BCP films, such as UVO absorptivity or biofouling prevention, important to potential new applications of such membranes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗