SEARCH · Search NASA

Results for “Two dimensional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Effect of wall cooling on the stability of compressible subsonic flows over smooth humps and backward-facing steps

The effect of wall cooling on the two-dimensional linear stability of subsonic flows over two-dimensional surface imperfections is investigated. Results are presented for flows over smooth humps and backward-facing steps with Mach numbers up to 0.8. The results show that, whereas cooling decreases the viscous instability, it increases the shear-layer instability and hence it increases the growth rates in the separation region. The coexistence of more than one instability mechanism makes a certain degree of wall cooling most effective. For the Mach numbers 0.5 and 0.8, the optimum wall temperatures are about 80 pct and 60 pct of the adiabatic wall temperature, respectively. Increasing the Mach number decreases the effectiveness of cooling slightly and reduces the optimum wall temperature.

Al-Maaitah, Ayman A.↗

DOE OSTI2023

Light-activated microtubule-based two-dimensional active nematic

We assess the ability of two light responsive kinesin motor clusters to drive dynamics of microtubule-based active nematics: opto-K401, a processive motor, and opto-K365, a non-processive motor. Measurements reveal an order of magnitude improvement in the contrast of nematic flow speeds between maximally- and minimally-illuminated states for opto-K365 motors when compared to opto-K401 construct. For opto-K365 nematics, we characterize both the steady-state flow and defect density as a function of applied light. We also examine the transient behavior as the system switches between steady-states upon changes in light intensities. Although nematic flows reach a steady state within tens of seconds, the defect density exhibits transient behavior for up to 10 minutes, showing a separation between small-scale active flows and system-scale structural states. Furthermore, our work establishes an experimental platform that can exploit spatiotemporally-heterogeneous patterns of activity to generate targeted dynamical states.

42 ENGINEERING↗

NASA NTRS1987

Nearly two-dimensional solutions of Euler's equations

Motivated by a stretched version of the Taylor-Green initial-value problem for the Euler and Navier-Stokes equations, nearly two-dimensional incompressible flows are considered involving a single direction of slow spatial variation. A multiple-scale formulation of the problem leads by contour averaging to a system that determines the slow development in space and time. It is shown that the latter system is equivalent to an axisymmetric problem with nonstandard connection between circulation, cylindrical radius, and angular velocity component. Special solutions of the system in the exact axisymmetric case suggest that near-two-dimensionality is lost in finite time.

Childress, Stephen↗

NASA NTRS1987

Applications of Wynn's epsilon-algorithm to transonic flow-calculations

Convergence acceleration of iterative solutions of potential and Euler equations, based on Wynn's epsilon-algorithm, is demonstrated. The extra computational work, to apply the technique, is negligible, while the storage requirement is definitely affordable with the present computers, at least, for two-dimensional inviscid flow problems.

Hafez, M.↗

NASA NTRS1984

An experimental investigation of two-dimensional thrust augmenting ejectors, part 2

The flow-field within a two-dimensional thrust augmenting ejector has been documented experimentally. Results are presented on the mean velocity field and the turbulent correlations by Laser Doppler Velocimeter, surface pressure distribution, surface temperature distribution, and thrust performance for two shroud geometries. The maximum primary nozzle pressure ratio tested was 3.0. The tests were conducted at primary nozzle temperature ratios of 1.0, 1.8 and 2.7. Two ejector characteristic lengths have been identified based on the dynamics of the ejector flow field, i.e., a minimum length L sub m below which no significant mixing occurs, and a critical length L sub c associated with the development of U'V' correlation in the ejector. These characteristic lengths divide the ejector flow field into three distinctive regions: the entrance region where there is no direct interaction between the primary flow and the ejector shroud; the interaction region where there is an increased momentum of induced flow near the shroud surface; and a pipe flow region characterized by an increased skin friction where x is the distance downstream from the ejector inlet. The effect of the coflowing induced flow has been shown to produce inside the ejector a centerline velocity that has increased over the free-jet data.

Bernal, L.↗

NASA NTRS1984

On the use of parametric differentiation to predict weak shock waves

The method of parametric differentiation is shown to be an effective means to transform both the time-linearized and the fully nonlinear transonic small disturbance potential flow equations to a linear system of equations. The globally linearized equations are then solved in phase space by finite difference methods and integral equation methods. The predicted birth, growth, and motion of weak shock waves in two-dimensional transonic flows are compared with existing theory and experiment.

Harris, W. L.↗

NASA NTRS1992

Development of an algebraic turbulence model for analysis of propulsion flows

A simple turbulence model that will be applicable to propulsion flows having both wall bounded and unbounded regions was developed and installed within the PARC Navier-Stokes code by linking two existing algebraic turbulence models. The first is the Modified Mixing Length (MML) model which is optimized for wall bounded flows. The second is the Thomas model, the standard algebraic turbulence model in PARC which has been used to calculate both bounded and unbounded turbulent flows but was optimized for the latter. This paper discusses both models and the method employed to link them into one model (referred to as the MMLT model). The PARC code with the MMLT model was applied to two dimensional turbulent flows over a flat plate and over a backward facing step to validate and optimize the model and to compare its predictions to those obtained with the three turbulence models already available in PARC.

Georgiadis, N. J.↗

NASA NTRS1992

Development of an algebraic turbulence model for analysis of propulsion flows

Georgiadis, N. J.↗

NASA NTRS1990

Modeling supersonic combustion using a fully-implicit numerical method

A fully-implicit finite-volume algorithm for two-dimensional axisymmetric flows has been coupled to a detailed hydrogen-air reaction mechanism (13 species and 33 reactions) so that supersonic combustion phenomena may be investigated. Numerical computations are compared with ballistic-range shadowgraphs of Lehr (1972) that exhibit two discontinuities caused by a blunt body as it passes through a premixed stoichiometric hydrogen-air mixture. The suitability of the numerical procedure for simulating these double-front flows is shown. The requirements for the physical formulation and the numerical modeling of these flowfields are discussed. Finally, the sensitivity of these external flowfields to changes in certain key reaction rate constants is examined.

Maccormack, Robert W.↗

NASA NTRS1986

Vortex cloud model for body vortex shedding and tracking

The discrete vortex cloud approach models a missile airframe's vortex wake by means that are capable of treating a variety of configurations over a range of flow conditions. Attention is given to the sheets of vorticity formed on the lee side of a missile at moderate angles-of-attack. While three-dimensional attached flow models are used to represent the missile body, two-dimensional, incompressible, separated flow models are used to represent the separated vortex wake. The predicted pressure distribution of the body under the influence of the freestream and the separation vortex wake are used to calculate aerodynamic loads on the body. The separation vortex wake is represented by clouds of discrete vortices in cross flow planes normal to the body axis.

Mendenhall, Michael R.↗

DOE OSTI2017

SOLVING CONJUGATE HEAT TRANSFER PROBLEM IN TWO-PHASE FLOW USING NEWTON-KRYLOV METHOD

In this paper, we successfully demonstrated an application of the Jacobian-free Newton Krylov (JFNK) method in solving the conjugated two-phase channel flow and heat conduction problem, in a fully coupled and fully implicit manner. Such a problem represents the most fundamental piece of safety analysis codes, for example the heat transfer between fuel rods and reactor coolant during postulated accidental scenarios. The two-phase flow is modeled with the widely accepted one-dimensional two-fluid two-phase flow model, and the heat conduction is modeled with two-dimensional heat conduction model. The coupling between these two physics is realized through the wall heat transfer term in fluid equations and heat flux boundary conditions of heat conduction model. For spatial discretization, both the first-order and second- order upwind schemes are considered for flow equations, while the standard central differencing method is used for the heat conduction model. For time integration, both the first-order backward Euler (BDF1) and second-order BDF2 schemes are considered. Several treatments were also introduced to enhance the robustness of the JFNK method in solving such a problem that is discontinuous in nature because of the discrete closure correlations. These treatments include the re-introduction of a transition region between the slug and annular mist flow regimes, and a simplification in the interfacial drag term. Numerical results have been extensively validated with experimental data in both vertical pipe and rod bundle geometries with a wide range of thermal-hydraulics conditions, including pressure, inlet subcooling, wall heat flux, outlet void fraction, and etc. Further benchmark with the RELAP5-3D code confirms the correct implementation of wall heat transfer models.

42 ENGINEERING↗

NASA NTRS2001

Electro-Thermal Simulation Studies of SiC Junction Diodes Containing Screw Dislocations Under High Reverse-Bias Operation

The objective of this work was to conduct a modeling study of SiC P-N junction diodes operating under high reverse biased conditions. Analytical models and numerical simulation capabilities were to be developed for self-consistent electro-thermal analysis of the diode current-voltage (I-V) characteristics. Data from GRC indicate that screw dislocations are unavoidable in large area SiC devices, and lead to changes in the SiC diode electrical response characteristics under high field conditions. For example, device instability and failures linked to internal current filamentation have been observed. The physical origin of these processes is not well understood, and quantitative projections of the electrical behavior under high field and temperature conditions are lacking. Thermal calculations for SiC devices have not been reported in the literature either. So estimates or projections of peak device temperatures and power limitations do not exist. This numerical study and simulation analysis was aimed at resolving some of the above issues. The following tasks were successfully accomplished: (1) Development of physically based models using one- and two-dimensional drift-diffusion theory for the transport behavior and I-V characteristics; (2) One- and two-dimensional heat flow to account for internal device heating. This led to calculations of the internal temperature profiles, which in turn, were used to update the electrical transport parameters for a self-consistent analysis. The temperature profiles and the peak values were thus obtainable for a given device operating condition; (3) Inclusion of traps assumed to model the presence of internal screw dislocations running along the longitudinal direction; (4) Predictions of the operating characteristics with and without heating as a function of applied bias with and without traps. Both one and two-dimensional cases were implemented; (5) Assessment of device stability based on the operating characteristics. The presence of internal non-uniformities, particularly filamentary structures, was probed and demonstrated; (6) Cause and physical origins of filamentary behavior and unstable I-V characteristics were made transparent; (7) It was demonstrated that diodes containing defects would be more prone to thermal breakdown associated with the temperature dependent decrease in the thermal conductivity; and (8) Finally, negative differential resistance (S-shaped NDR) which can potential lead to device instability and filamentary behavior was shown to occur for diodes containing a line of defects such as could be associated with a screw dislocation line.

Joshi, R. P.↗

NASA NTRS1974

A viscous/potential flow interaction analysis method for multi-element infinite swept wings, volume 1

An analysis method and computer program have been developed for the calculation of the viscosity dependent aerodynamic characteristics of multi-element infinite swept wings in incompressible flow. The wing configuration consisting at the most of a slat, a main element and double slotted flap is represented in the method by a large number of panels. The inviscid pressure distribution about a given configuration in the normal chord direction is determined using a two dimensional potential flow program employing a vortex lattice technique. The boundary layer development over each individual element of the high lift configuration is determined using either integral or finite difference boundary layer techniques. A source distribution is then determined as a function of the calculated boundary layer displacement thickness and pressure distributions. This source distribution is included in the second calculation of the potential flow about the configuration. Once the solution has converged (usually after 2-5 iterations between the potential flow and boundary layer calculations) lift, drag, and pitching moments can be determined as functions of Reynolds number.

Dvorak, F. A.↗

NASA NTRS2007

Innovative Concept for a Heavy-Load Aircraft Utilizing a Two-Dimensional Wing

Heavy-load aircraft of conventional wing-body-tail design have become very large. Excessive size of such aircraft may present problems in the manufacturing process. In addition, large wing spans may cause some difficulties in ground handling. Increasing lift loads on large span cantilever wings will also increase the strength of the wing tip vortex. The concept presented herein proposes a means for substantially increasing the lift load capability of an aircraft without increasing the overall length and span of the configuration. The concept has a rectangular wing with a relatively low span and a large chord to provide the area required for high lift. Large fuselages are attached at each wing tip to provide the volume required for heavy loading. The fuselages serve as endplates for the wing and should preclude tip flow so that two-dimensional flow might be established on the wing. Elimination of the wing tip flow should prevent the formation of a tip vortex and eliminate the tip vortex hazard to trailing aircraft. Exploratory wind tunnel tests of such an aircraft concept have been conducted. Lessons learned from these tests are discussed herein in an effort to determine the validity of the concept.

Spearman, M. Leroy↗

NASA NTRS1989

Characterization of fluid flow by digital correlation of scattered light

The objective is to produce a physical system suitable for a space environment that can measure fluid velocities in a three-dimensional volume by the development of a particle correlation velocimetry technique. Experimental studies were conducted on a field test cell to demonstrate the suitability and accuracy of digital correlation techniques for measuring two-dimensional fluid flows. This objective was satisfied by: (1) the design of an appropriate illumination and detection system for making velocity measurements within a test cell; (2) the design and construction of a test cell; (3) the preliminary evaluations on fluid and seeding requirements; and (4) the performance of controlled tests using a multiple exposure correlation technique. This presentation is represented by viewgraphs with very little text.

Gilbert, John A.↗

NASA NTRS1978

Perturbations in two- and three-dimensional transonic flows

The difficulty of treating the perturbation of transonic flow, during which shock waves change position, can be overcome by using a distorted coordinate system in which the locations of all shock waves do not change; the distortion is found as part of the solution. This device leads to a relation that allows a range of flows, with differing shock locations, to be related algebraically to two known 'calibration' flows. Results for flows around finite wings, including those with multiple, intersecting shock waves, are presented. A typical computing time for such examples is 0.3 sec on a CDC 7600 computer.

Nixon, D.↗

NASA NTRS1987

An experimental investigation of a supercritical airfoil at transonic speeds

Benchmark experimental data obtained in the two-dimensional, transonic flow field surrounding a supercritical airfoil are presented. Airfoil surface and tunnel wall pressure and LDV measurements are used to describe the flow on the model, above the wing and in the wake. Comparisons are made with calculations using the Reynolds-averaged Navier-Stokes equations. The results illustrate the performance of two turbulence models in both separated and attached flows. The largest differences between theory and experiment occurred in separated flows with the Johnson and King turbulence model providing the best estimates.

Mateer, George C.↗

NASA NTRS1991

The development of laser speckle velocimetry for the study of vortical flows

A new experimental technique commonly known as PIDV (particle image displacement velocity) was developed to measure an instantaneous two dimensional velocity fluid in a selected plane of the flow field. This technique was successfully applied to the study of several problems: (1) unsteady flows with large scale vortical structures; (2) the instantaneous two dimensional flow in the transition region of a rectangular air jet; and (3) the instantaneous flow over a circular bump in a transonic flow. In several other experiments PIDV is routinely used as a non-intrusive measurement technique to obtain instantaneous two dimensional velocity fields.

Krothapalli, A.↗