Search NASA⌕ Search

SEARCH · Search NASA

Results for “anionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Sr{sub 3}Bi{sub 2}(SeO{sub 3}){sub 6}·H{sub 2}O: A novel anionic layer consisting of second-order Jahn–Teller (SOJT) distortive cations

A new layered bismuth selenite hydrate material, Sr{sub 3}Bi{sub 2}(SeO{sub 3}){sub 6}·H{sub 2}O has been synthesized through a hydrothermal reaction using SrCO{sub 3}, Bi{sub 2}O{sub 3}, SeO{sub 2}, and water as reagents. The crystal structure of the reported material has been determined by single crystal X-ray diffraction analysis. The anionic layered framework of Sr{sub 3}Bi{sub 2}(SeO{sub 3}){sub 6}·H{sub 2}O consists of polyhedra of second-order Jahn–Teller (SOJT) distortive cations, Bi{sup 3+} and Se{sup 4+}. Attributable to the variable and asymmetric coordination geometry of the constituent cations, a rich structural chemistry including uni-dimensional bands and linkers is observed in the layer. The material is thermally stable up to about 390 °C and starts decomposing due to the sublimation of SeO{sub 2} above the temperature. The UV–vis diffuse reflectance spectrum suggests a band gap of 3.3 eV. Elemental analysis, infrared spectrum, local dipole moment calculations, and electronic structure calculations are also reported. - Graphical abstract: Ball-and-stick and polyhedral representation of Sr{sub 3}Bi{sub 2}(SeO{sub 3}){sub 6}·H{sub 2}O in the ab-plane. The stereoactive lone pairs are visualized around the Bi{sup 3+} and Se{sup 4+} as lobelike isosurfaces through ELF calculations with η=0.9. - Highlights: • A novel layered bismuth selenite, Sr{sub 3}Bi{sub 2}(SeO{sub 3}){sub 6}·H{sub 2}O has been hydrothermally synthesized. • The layer is only composed of second-order Jahn–Teller distortive cations in asymmetric environments. • The stereoactive lone pairs are visualized as lobelike isosurfaces through ELF calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of PbTe nanorods controlled by polymerized tellurium anions and metal(II) amides via composite-hydroxide-mediated approach

The pure face-centered-cubic PbTe nanorods have been synthesized by the composite-hydroxide-mediated approach using hydrazine as a reducing agent. The method is based on reaction among reactants in the melts of potassium hydroxide and sodium hydroxide eutectic at 170-220 deg. C and normal atmosphere without using any organic dispersant or surface-capping agent. Scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray spectroscopy were used to characterize the structure, morphology and composition of the samples. The diameters of nanorods are almost fixed, while the lengths can be tunable under different growth time and temperatures. The growth mechanism of PbTe nanorods is investigated via UV-vis absorption, demonstrating that polymerized tellurium anions and metal(II) amides in the hydrazine hydroxide melts could control the crystallization and growth process of PbTe nanostructures. The band gap of as-synthesized PbTe nanorods has been calculated based on UV-vis-NIR optical diffuse reflectance spectra data.

36 MATERIALS SCIENCE↗

X-ray powder diffraction, vibration and thermal studies of [A{sub 0.92}(NH{sub 4}){sub 0.08}]{sub 2}TeCl{sub 4}Br{sub 2} with A = Cs, Rb: Influence of mixed cationic and anionic substitutions

Graphical abstract: The structures of [A{sub 0.92}(NH{sub 4}){sub 0.08}]{sub 2}TeCl{sub 4}Br{sub 2} with A = Cs, Rb belong to the tetragonal {beta}-K{sub 2}SnCl{sub 6} structure type. Highlights: Black-Right-Pointing-Pointer The two new compound crystallises in P4/mnc tetragonal space group. Black-Right-Pointing-Pointer The structure is considered as isolated octahedred TeCl{sub 4}Br{sup 2-}. Black-Right-Pointing-Pointer The octahedra connected by ionic and hydrogen bonding through the Cs/Rb or N atoms. Black-Right-Pointing-Pointer A DTA/TGA experiment reveals one endothermic peak at 780 K for these compounds. Black-Right-Pointing-Pointer One endothermic peak is detected at around 213 K by DSC experiment. -- Abstract: The crystal structures of [A{sub 0.92}(NH{sub 4}){sub 0.08}]{sub 2}TeCl{sub 4}Br{sub 2} with A = Cs, Rb have been determined using X-ray powder diffraction techniques. The two compounds crystallize in the tetragonal space group P4/mnc, with the unit cell parameters: a = 7.452(1) Angstrom-Sign , c = 10.544(3) Angstrom-Sign , Z = 2 and a = 7.315(2) Angstrom-Sign , c = 10.354(4) Angstrom-Sign , Z = 2 in the presence of Cs and Rb, respectively. These two compounds have an antifluorite-type arrangement of NH{sub 4}{sup +}/Rb{sup +}/Cs{sup +} and octahedral TeCl{sub 4}Br{sub 2}{sup 2-} anions. The stability of these structure is by ionic and hydrogen bonding contacts: A Midline-Horizontal-Ellipsis Cl, A Midline-Horizontal-Ellipsis Br and N-H Midline-Horizontal-Ellipsis Cl, N-H Midline-Horizontal-Ellipsis Br. The different vibrational modes of these powders were analysed by FTIR and Raman spectroscopic studies. A DTA/TGA experiment reveals one endothermic peak at 780 K implicating the decomposition of the sample. At low temperature, one endothermic peak in thermal behavior is detected at around 213 K by DSC experiment. This transition was confirmed by dielectric measurements.

36 MATERIALS SCIENCE↗

Effect of stoichiometry and hydration level on water domain size and transport in poly(aryl piperidinium) alkaline anion-exchange membranes

Alkaline water electrolysis holds promise in decarbonizing the global economy by enabling renewable hydrogen production with non-precious group metal catalysts. Anion exchange membranes are an important component of alkaline water electrolyzers and would ideally be durable while allowing for high hydroxide conductivity. The poly(aryl piperidinium) (PAP) class of polymers has attracted recent interest due to their good mechanical robustness and high ionic conductivity. Here, in this work, we perform atomistic molecular dynamics (MD) simulations of several PAP polymers at experimentally relevant hydration levels and polymer ion exchange capacities (IECs) to gain nanoscale insight into their properties and to help elucidate the trade-offs that result from tuning the IECs through the polymer stoichiometry. Our MD-predicted macroscopic polymer properties were found to be in good agreement with experimentally available polymer swelling ratios, water-occupied volumes, X-ray scattering, and ionic conductivities. The models show that for hydration levels greater than 8H 2 O per cation a single water cluster will form that percolates through the system. The growth in water cluster size results in large polymer swelling, the creation of larger channels with widths of 7 Å or larger, and nanophase separation between the hydrophilic domains and the polymer with characteristic length scales of approximately 20–30 Å. The experimentally observed lack of a strong X-ray scattering peak at low wavevectors can be explained by a cancellation between the polymer-polymer/water-water and polymer-water correlations and not a loss in nanophase separation. The overlap in coordination environments of the hydroxide oxygen and polymer nitrogen atoms implies that vehicular diffusion between cationic groups could play a role in hydroxide transport. The polymers' hydroxide and water diffusion constants increase by approximately an order of magnitude between hydration levels of 8 and 20H 2 O per cation. However, there are diminishing returns in hydroxide diffusion constant once the IEC exceeds 2.4 meq/g.

08 HYDROGEN↗

Single and Dual-Solute Transport in Quaternary Ammonium-Functionalized Anion Exchange Membranes: Isolating the Impact of Water Volume Fraction

Membranes are essential components of photoelectrochemical CO 2 reduction cells (PEC-CRC), as they regulate solute transport and impact device efficiency. These cells are a promising approach for converting carbon dioxide into valuable chemicals. However, electrochemical reactions involve not just a single electrolyte; membrane transport typically includes multiple electrolytes. When a mixture of solutes is present, the presence of one solute in the membrane can impact the diffusion and sorption of other solutes. In complex systems where multiple solutes are diffusing simultaneously through a hydrated, dense polymer membrane, the resulting transport behavior is poorly understood. This study highlights the individual and two solute transport behavior of potassium formate, acetate, and bicarbonate ions in neutral membranes and quaternary ammonium-functionalized anion exchange membranes (AEMs) based on phenyl acrylate polymer backbones. By isolating the effect of water content, we emphasize how fixed charge density and solute-membrane interactions influence transport behavior. In neutral membranes, the diffusivity follows the order of potassium formate > potassium acetate > potassium bicarbonate. However, in AEMs, the order shifts due to changes in ion-membrane interactions, with potassium bicarbonate diffusivity surpassing that of potassium acetate. These results underscore the importance of ion exchange membranes and ion-membrane interaction in modulating transport properties, providing valuable insights for optimizing membranes in electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells

One of the most important needs for the future of low-cost fuel cells is the development of highly active platinum group metal (PGM)-free catalysts. For the oxygen reduction reaction, Fe–N–C materials have been widely studied in both acid and alkaline media. However, reported catalysts in the literature show quite different intrinsic activity and in-cell performance, despite similar synthesis routes and precursors. Here, two types of Fe–N–C are prepared from the same precursor and procedure – the main difference is how the precursor was handled prior to use. It is shown that in one case Fe overwhelmingly existed as highly active single-metal atoms in FeN4 coordination (preferred), while in the other case large Fe particles coexisting with few single metal atoms were obtained. As a result, there were drastic differences in the catalyst structure, activity, and especially in their performance in an operating anion exchange membrane fuel cell (AEMFC). Additionally, it is shown that catalyst layers created from single-atom-dominated Fe–N–C can have excellent performance and durability in an AEMFC using H 2 /O 2 reacting gases, achieving a peak power density of 1.8 W cm -2 – comparable to similar AEMFCs with a Pt/C cathode – and being able to operate stably for more than 100 h. Finally, the Fe–N–C cathode was paired with a low-loading PtRu/C anode electrode to create AEMFCs (on H 2 /O 2 ) with a total PGM loading of only 0.135 mg cm -2 (0.090 mg Pt cm -2 ) that was able to achieve a very high specific power of 8.4 W mg PGM -1 (12.6 W mg Pt< sup>-1 ).

36 MATERIALS SCIENCE↗

Anion and cation co-doping of Na 4 SnS 4 as sodium superionic conductors

Na based all-solid-state batteries are one of the most promising candidates for large-scale electrochemical energy storage owing to their low cost and outstanding safety properties. The key enabler of this technology is solid electrolyte with sufficiently high ionic conductivity at room temperature. In this work, the design, synthesis, characterization and testing of a series of novel fast Na-ion conductors, Na 4-x-y Sn 1-x A x S 4-y X y with aliovalent cation (P 5+ /Sb 5+ ) and anion substitutions (Cl - /Br - ) of the parent compound Na 4 SnS 4 are reported. The doped samples crystalize in a new phase with space group I4 1 /acd and show ionic conductivities that are one to four orders of magnitude higher than that of undoped Na 4 SnS 4 . R. t. conductivity of 0.64 mS cm -1 is achieved in Na 3.7 Sn 0.8 Sb 0.2 S 3.9 Cl 0.1 with a low activation energy of 0.26 eV. Furthermore, Rietveld refinement against high resolution synchrotron X-ray powder diffraction data reveals that the distribution of the doping ions and the resulted Na vacancies are underlying cause of the enhanced conductivity.

36 MATERIALS SCIENCE↗

Negligible voltage hysteresis with strong anionic redox in conventional battery electrode

Lattice anionic (oxygen) redox reactions (ARR) offers opportunities for developing high-capacity batteries, however, often suffers the notoriously high hysteresis in voltages and low initial coulombic efficiency. Particularly, ARR was widely considered inherent to these kinetic issues. Here, unambiguous evidences of strong and reversible ARR is found in Na 2/3 Ni 1/3 Mn 2/3 O 2 through mapping of resonant inelastic X-ray scattering (mRIXS). Strikingly, the material displays negligible voltage hysteresis (0.1 V) and high initial coulombic efficiency with a highly stable electrochemical profile. Our independent analysis of the Ni, Mn and O states consistently interpret the redox mechanism of Na 2/3 Ni 1/3 Mn 2/3 O 2 , which reveals a strong ARR system with facile kinetics and highly stable electrochemical profile that previously found only in cationic redox systems of conventional non-Alkali-rich materials.

25 ENERGY STORAGE↗

Multicomponent transport of alcohols in an anion exchange membrane measured by in-situ ATR FTIR spectroscopy

Multicomponent transport through membranes is encountered in many applications, including photoelectrochemical CO2 reduction devices that convert CO2 into alcohols. We report the use of in-situ ATR FTIR spectroscopy to quantify the permeability of Selemion AMV, a commonly used anion exchange membrane, to mixtures of alcohols. An in-situ ATR FTIR spectrophotometer probe inserted into a standard diffusion cell enabled straightforward measurement of membrane permeability in multicomponent transport experiments without the need to periodically remove aliquots from the diffusion cell. The solubilities of alcohols in Selemion AMV were measured using a standard sorption/desorption technique. The solution-diffusion model was used to calculate alcohol diffusivities in Selemion AMV from measured permeabilities and solubilities. In addition, the relative contributions of alcohol solubility and diffusivity to overall permeability are discussed, and changes in permeability, solubility, and diffusivity with changing composition in binary and ternary alcohol mixtures are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeta potential measurements of SiO 2 and TiO 2 particles in anionic and cationic surfactant solutions

Zeta potential measurements can provide valuable insights into colloidal stability and may reflect changes in the electrochemical double layer that influence electrocatalysis. In this study, we used zeta potential measurements to monitor and investigate the adsorption behavior of anionic sodium dodecyl sulfate (SDS), cationic dodecyl trimethyl ammonium bromide (DTAB), and cationic cetyl trimethyl ammonium bromide (CTAB) surfactants on SiO 2 and TiO 2 particles in DI water. The zeta potentials of SiO 2 and TiO 2 particles were measured as a function of particle concentration in 1.0 mM, 5.0 mM, and 10.0 mM surfactant solutions. Results indicate that there is no significant adsorption of DS - ions on SiO 2 particles across all SDS concentrations investigated in this study. The zeta potential of TiO 2 particles shifts from negative to positive as particle concentration increases at 1.0 mM SDS, indicating a decrease in DS - ions adsorption per TiO 2 particle. Adsorption plateaus at 5.0 mM SDS for all TiO 2 concentrations studied. In contrast, DTA + and CTA + ions showed clear adsorption on SiO 2 particles, but DTA + exhibited no apparent adsorption on TiO 2 particles. Interestingly, CTA + adsorption on TiO 2 was only evident at higher surfactant concentrations. This study presents a systematic investigation of zeta potential behavior as a function of particle and surfactant concentration, highlighting adsorption saturation and electrostatic reversal. Unlike prior work that was limited to single particle concentration measurements, our approach reveals how surfactant adsorption per particle decreases with increasing surface area. Despite the structural similarity between DTAB and CTAB, this study captured the different adsorption behaviors of both surfactants on SiO 2 and TiO 2 , emphasizing the role of the overall structure of the surfactant on surfactant adsorption behavior. These insights refine the interpretation of zeta potential data and advance understanding of surfactant adsorption on oxide particles. The insight provided in this study about surfactant adsorption on SiO 2 and TiO 2 particles could have important implications for the design of more effective colloidal and catalytic systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Low doses of ochratoxin A upregulate the protein expression of organic anion transporters Oat1, Oat2, Oat3 and Oat5 in rat kidney cortex

Mycotoxin ochratoxin A (OTA) is nephrotoxic in various animal species. In rodents, OTA intoxication impairs various proximal tubule (PT) functions, including secretion of p-aminohippurate (PAH), possibly via affecting the renal organic anion (OA) transporters (Oat). However, an effect of OTA on the activity/expression of specific Oats in the mammalian kidney has not been reported. In this work, male rats were gavaged various doses of OTA every 2nd day for 10 days, and in their kidneys we studied: tubule integrity by microscopy, abundance of basolateral (rOat1, rOat3) and brush-border (rOat2, rOat5) rOat proteins by immunochemical methods, and expression of rOats mRNA by RT-PCR. The OTA treatment caused: a) dose-dependent damage of the cells in S3 segments of medullary rays, b) dual effect upon rOats in PT: low doses (50-250 {mu}g OTA/kg b.m.) upregulated the abundance of all rOats, while a high dose (500 {mu}g OTA/kg b.m.) downregulated the abundance of rOat1, and c) unchanged mRNA expression for all rOats at low OTA doses, and its downregulation at high OTA dose. Changes in the expression of renal Oats were associated with enhanced OTA accumulation in tissue and excretion in urine, whereas the indicators of oxidative stress either remained unchanged (malondialdehyde, glutathione, 8-hydroxydeoxyguanosine) or became deranged (microtubules). While OTA accumulation and downregulation of rOats in the kidney are consistent with the previously reported impaired renal PAH secretion in rodents intoxicated with high OTA doses, the post-transcriptional upregulation of Oats at low OTA doses may contribute to OTA accumulation and development of nephrotoxicity.

60 APPLIED LIFE SCIENCES↗

Photoinduced Anion Segregation in Mixed Halide Perovskites

Alloyed lead halide perovskites have taken a dominant role in the quest for third-generation solar cells. This is due to optimal light-harvesting properties, which can be tuned across the visible spectrum by mixing halide (X = Cl – , Br – , and I – ) anions and A + cations (A + = FA + , MA + , and Cs + ). Durability issues related to ion movement within the perovskite lattice, however, impede large-scale commercialization. Uniformly mixed halide perovskites [e.g., APb(I 1– x Br x ) 3 ] reversibly segregate into narrow bandgap I-rich and wide bandgap Br-rich domains during continuous visible illumination. Subsequent I-rich domains reduce local open circuit voltages and decrease mixed halide perovskite solar cell power conversion efficiencies. In this review, we assess the known effects of halide segregation on the structural and optical properties of mixed halide materials, discuss ongoing research to suppress the phenomenon, and finally provide a mechanistic overview of its underlying origins.

36 MATERIALS SCIENCE↗

Interaction of a potyviral VPg with anionic phospholipid vesicles

The viral genome-linked protein (VPg) of Potato virus A (PVA) is a multifunctional protein that belongs to a class of intrinsically disordered proteins. Typically, this type of protein gains a more stable structure upon interactions or posttranslational modifications. In a membrane lipid strip overlay binding assay, PVA VPg was found to bind phosphatidylserine (PS), but not phosphatidylcholine (PC). According to circular dichroism spectroscopy, the secondary structure of PVA VPg was stabilized upon interactions with PS and phosphatidylglycerol (PG), but not with PC vesicles. It is possible that this stabilization favored the formation of alpha-helical structures. Limited tryptic digestion showed that the interaction with anionic vesicles protected certain, otherwise accessible, trypsin cleavage sites. An electron microscopy study revealed that interaction with VPg substantially increased the vesicle diameter and caused the formation of pore or plaque-like electron dense spots on the vesicle surface, which gradually led to disruption of the vesicles.

60 APPLIED LIFE SCIENCES↗

Ether Cleavage Decreases the Ion Exchange Capacity of Anion Exchange Membranes

Anion exchange membranes (AEMs) are integral to fuel cells and water electrolysis systems but suffer from poor durability under alkaline conditions. Ether cleavage is an important failure pathway of poly(arylene ether)-based AEMs that compromises both mechanical stability and ion transport. While this degradation pathway is often studied in terms of polymer fragmentation, the role of newly formed hydrophilic groups has been largely overlooked. Here, we show that polymer scission leads to reduced mechanical rigidity, while the introduction of hydrophilic groups partially mitigates this loss. Under alkaline conditions, phenoxide groups formed during ether cleavage neutralize the polymer cations, leading to a previously unreported loss of ion exchange capacity (IEC). This IEC loss mechanism exacerbates the reduction in ionic conductivity, emphasizing the severity of ether cleavage as a degradation pathway. Recognizing that ether cleavage introduces significant chemical changes beyond polymer fragmentation provides critical insights into its interplay with other degradation mechanisms, such as the direct reduction of cationic sites by E2 and S N 2, and provides molecular-level interpretations for the concurrent effects of polymer scission and increased hydrophilicity on membrane performance.

crystal cleavage↗

A new anion receptor for improving the interface between lithium- and manganese-rich layered oxide cathode and the electrolyte

Surface degradation on cycled lithium-ion battery cathode particles is governed not only by intrinsic thermodynamic properties of the material but also, oftentimes more predominantly, by the side reactions with the electrolytic solution. A superior electrolyte inhibits these undesired side reactions on the cathode and at the electrolyte interface, which consequently minimizes the deterioration of the cathode surface. The present study investigates a new boron-based anion receptor, tris(2,2,2-trifluoroethyl)borate (TTFEB), as an electrolyte additive in cells containing a lithium- and manganese-rich layered oxide cathode, Li 1.16 Ni 0.2 Co 0.1 Mn 0.54 O 2 . Our electrochemical studies demonstrate that the cycling performance and Coulombic efficiency are significantly improved because of the additive, in particular, under elevated temperature conditions. Spectroscopic analyses revealed that the addition of 0.5 wt % TTFEB is capable of reducing the content of lithium-containing inorganic species within the cathode-electrolyte interphase layer and minimizing the reduction of tetravalent Mn4+ at the cathode surface. Furthermore, our work introduces a novel additive highly effective in improving lithium-ion battery performance, highlights the importance in preserving the surface properties of cathode materials, and provides new insights on the working mechanism of electrolyte additives.

25 ENERGY STORAGE↗

Efficient Capture of Perrhenate and Pertechnetate by a Mesoporous Zr Metal–Organic Framework and Examination of Anion Binding Motifs

At the Hanford Site in southeastern Washington state, the U.S. Department of Energy intends to treat 56 million gallons of legacy nuclear waste by encasing it in borosilicate glass via vitrification. This process ineffectively captures radioactive pertechnetate (TcO 4 –) because of the ion’s volatility, thereby requiring a different remediation method for this long-lived (t 1/2 = 2.1 × 10 5 years), environmentally mobile species. Currently available sorbents lack the desired combination of high uptake capacity, fast kinetics, and selectivity. Here, we evaluate the ability of the chemically and thermally robust Zr 6 -based metal–organic framework (MOF), NU-1000, to capture perrhenate (ReO 4 –), a pertechnetate simulant, and pertechnetate. Our material exhibits an excellent perrhenate uptake capacity of 210 mg/g, reaches saturation within 5 min, and maintains perrhenate uptake in the presence of competing anions. Additionally, experiments with pertechnetate confirm perrhenate is a suitable surrogate. Single-crystal X-ray diffraction indicates both chelating and nonchelating perrhenate binding motifs are present in both the small pore and the mesopore of NU-1000. Postadsorption diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) further elucidates the uptake mechanism and powder X-ray diffraction (PXRD) and Brunauer–Emmett–Teller (BET) surface area analysis confirm the retention of crystallinity and porosity of NU-1000 throughout adsorption.

36 MATERIALS SCIENCE↗

Lithium Intercalation in Anatase Titanium Vacancies and the Role of Local Anionic Environment

The structure of bulk and nondefective compounds is generally described with crystal models built from well mastered techniques such the analysis of an X-ray diffractogram. The presence of defects, such as cationic vacancies, locally disrupt the long-range order, with the appearance of local structures with order extending only a few nanometers. To probe and describe the electrochemical properties of cation-deficient anatase, we investigated a series of materials having different concentrations of vacancies, i.e., Ti 1–x–y $\square$ x+y O 2–4(x+y) F 4x (OH) 4y , and compared their properties with respect to defect-free stoichiometric anatase TiO2. At first, we characterized the series of materials Ti 1–x–y $\square$ x+y O 2–4(x+y) F 4x (OH) 4y by means of pair distribution function (PDF), 19 F nuclear magnetic resonance (NMR), Raman and X-ray photoelectron spectroscopies, to probe the compositional and structural features. Second, we characterized the insertion electrochemical properties vs metallic lithium where we emphasized the beneficial role of the vacancies on the cyclability of the electrode under high C-rate, with performances scaling with the concentration of vacancies. The improved properties were explained by the change of the lithium insertion mechanism due to the presence of the vacancies, which act as host sites and suppress the phase transition typically observed in pure TiO 2 , and further favor diffusive transport of lithium within the structure. NMR spectroscopy performed on lithiated samples provides evidence for the insertion of lithium in vacancies. By combining electrochemistry and DFT-calculations, we characterized the electrochemical signatures of the lithium insertion in the vacancies. Importantly, we found that the insertion voltage largely depends on the local anionic environment of the vacancy with a fluoride and hydroxide-rich environments, yielding high and low insertion voltages, respectively. Lastly, this work further supports the beneficial use of defects engineering in electrodes for batteries and provides new fundamental knowledge in the insertion chemistry of cationic vacancies as host sites.

36 MATERIALS SCIENCE↗

Adsorption of Polyaromatic Backbone Impacts the Performance of Anion Exchange Membrane Fuel Cells

The performance of anion exchange membrane fuel cells (AEMFCs) employing Pt or PtRu electrocatalyst and ionomers with different polyaromatic backbones is correlated with the density functional theory (DFT)-calculated adsorption energies of the ionomer fragments on the metal surfaces. The performance of the AEMFCs tested in this work significantly changes depending on the backbone structure of polyaromatic ionomer or the type of the catalyst used at the anode. For the same anode catalyst, the performance decreases in the order poly(fluorene) > poly(p-biphenyl alkylene) > poly(terphenyl alkylene)s, which is in excellent agreement with the decrease in the DFT-calculated interaction energies between the catalyst surface and the corresponding ionomer fragment. Namely, DFT-calculated adsorption energies decrease in the order: p-terphenyl ≥ m-terphenyl > biphenyl > diphenyl ether > benzene ≥ o-terphenyl > 9,9-dimethyl fluorene. The trend in the adsorption energies is explained on the basis of the structural and conformational features of the ionomer fragments. Namely, strong adsorption of the polyaromatic ionomer fragments correlates with the number of benzene rings with a low rotational barrier that can bind parallel to the metal surfaces, leading to strong interaction and hybridization of the aromatic π-orbitals with metal electronic states. Furthermore, the results of this work suggest, therefore, that the interaction between the ionomer and electrocatalyst should be taken into account when designing high-performing ionomers even before considering other factors such as hydroxide conductivity, gas permeability, and water uptake of the ionomeric binder.

25 ENERGY STORAGE↗