Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

De-pollution efficacy of photocatalytic roofing granules

Photocatalytic building surfaces can harness sunlight to reduce urban air pollution. The NO x abatement capacity of TiO 2 -coated granules used in roofing products was evaluated for commercial product development. A laboratory test chamber and ancillary setup were built following conditions prescribed by ISO Standard 22197-1. It was validated by exposing reference P25-coated aluminum plates to a 3 L min -1 air flow enriched in 1 ppm NO under UVA irradiation (360 nm, 11.5 W m -2 ). We characterized prototype granule-surfaced asphalt shingles and loose granules prepared with different TiO 2 loadings and post-treatment formulations. Tests performed at surface temperatures of 25 and 60 °C showed that NO x abatement was more effective at the higher temperature. Preliminary tests explored the use of 1 ppm NO 2 and of 1 ppm and 0.3 ppm NO/NO 2 mixtures. Specimens were aged in a laboratory accelerated weathering apparatus, and by exposure to the outdoor environment over periods that included dry and rainy seasons. Laboratory aging led to higher NO removal and NO 2 formation rates, and the same catalyst activation was observed after field exposure with frequent precipitation. However, exposure during the dry season reduced the performance. This inactivation was mitigated by cleaning the surface of field-exposed specimens. Doubling the TiO 2 loading led to a 50–150% increase in NO removal and NO x deposition rates. Finally, application of different post-treatment coatings decreased NO removal rates (21–35%) and NO x deposition rates (26–74%) with respect to untreated granules. The mass balance of nitrogenated species was assessed by extracting granules after UV exposure in a 1 ppm NO-enriched atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Effect of surface acidity modulation on Pt/Al 2 O 3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al 2 O 3 SAC has been successfully prepared using a bayerite Al(OH) 3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al 2 O 3 with acidic WO 3 and basic MgO, the surface acidity of Pt/Al 2 O 3 was tuned. Here, activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al 2 O 3 performed better in CO oxidation under the reaction condition with H 2 O. Acidic WO 3 modified Pt/Al 2 O 3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H 2 O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al 2 O 3 and WO 3 /Pt/Al 2 O 3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al 2 O 3 . The superior methanol decomposition performance on WO 3 /Pt/Al 2 O 3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

36 MATERIALS SCIENCE↗

Facilitated Direct Liquid Fuel Cells with High Temperature Membrane Electrode Assemblies

Dimethyl ether (DME) is a liquid fuel of great potential impact due to its exceptionally high energy density. However, it has received minimal prior investigation as an alternative to either purified hydrogen or other liquid fuels, including methanol (MeOH). In the limited published literature work on direct dimethyl ether fuel cells, regardless of operating temperature, PtRu (either supported or unsupported on carbon) has been established as the standard catalyst of choice. The majority of the work in this program also utilized a Johnson Matthey (JM) HiSPEC ® 12100 PtRu/C (nominally 50% Pt, 25% Ru) while looking at electrode optimizations, beginning of life (BoL) performance, pressure- and temperature-dependent studies to look at the effect of binding affinity of DME oxidation intermediates, mass transport effects, crossover studies, and durability. However, it does also investigate some promising alternatives to PtRu/C as well, which should be investigated in more detail in further work. Those catalysts include a pair of ternary PtRuPd/C catalysts (from Los Alamos National Laboratory (LANL) and Pajarito Powder, LLC. (PP)) as well as a Pt 2 Bi Black catalyst from Professor Anastasios Angelopoulos of the University of Cincinnati (UC). This work achieved several project objectives, including an optimization of the membrane electrode assembly (MEA) process using PtRu/C anode catalyst. Additionally, these direct dimethyl ether fuel cells (DDFCs) were able to match or exceed many performance metrics for the state-of-the-art (SOA) direct methanol fuel cells (DMFCs), a primary and more evolved competitor to direct dimethyl ether fuel cells. This included peak specific power, total platinum group metal (PGM) loading, crossover current, degradation rate, start/stop cycling losses, and anode specific current.

09 BIOMASS FUELS↗

Atomically Dispersed Tin-Modified $\gamma$-alumina for Selective Propane Dehydrogenation under H 2 S Co-feed

Developing an earth-abundant catalyst that is sulfur-tolerant, active, and highly selective is of great interest for valorizing natural gas streams containing sour gas. Here, a tin-modified alumina catalyst is reported that is stable and selective for propane dehydrogenation in the presence of percent quantities of H 2 S in the feed. In particular, Sn/Al 2 O 3 –S catalysts with 1.5–5% Sn content exhibit 98% selectivity with up to 16% conversion at 560 °C during the fourth cycle. Experimental and computational characterization shows that the active sites are the defect tricoordinated Al atoms. H 2 S pretreatment further modifies a portion of these sites via exchanging a neighboring oxygen atom with sulfur, thereby rendering them more active and selective. At low loadings, Sn is atomically dispersed and selectively binds to hydroxyl groups or oxygen atoms on Al 2 O 3 . This prevents the formation of original (unmodified) defect sites on Al 2 O 3 and improves overall selectivity. The activity and selectivity of the catalyst are heavily dependent on the chemical potential of sulfur and hydrogen because they influence both the relative concentration of the two types of sites and the overall reaction mechanism. Finally, the catalyst can be regenerated fully under a pure H 2 S stream, thereby precluding treatment under oxygen, which can lead to sintering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of the method of active site characterization for determining structure-sensitivity in Ag-catalyzed ethylene epoxidation

We report catalysts have been prepared on a low surface area α-Al 2 O 3 support used commercially for previous generation olefin epoxidation catalysts. Prescreening of the low surface area alumina (0.73 m 2 /g) indicated the absence of acid catalyzed isomerization of EO at an evaluation temperature of 210 °C. A 0.1 wt% Ag base material synthesized by incipient wetness impregnation of AgNO 3 was used as a base material for electroless deposition (ED) of additional Ag to increase particle sizes by controlled reduction of Ag + directly onto the preexisting Ag surface to form weight loadings between 0.3 and 5.0 wt% metal. A 12 wt% Ag/α-Al 2 O 3 using Ag 2 C 2 O 4 as the Ag precursor was also prepared to compare performance of the ED samples with a catalyst more typical of industrial formulations. Characterization by SEM, STEM, and hydrogen titration of oxygen precovered Ag characterized before and after catalytic evaluation indicated that microscopy is required to accurately represent distributions of Ag particle sizes, but H 2 titration of O-precovered Ag gives the best representation of active sites since it directly counts the number of Ag surface sites. Larger particles >100 nm are resistant to both Ag sintering and carbon foulant; TOF values were relatively insensitive to particle size with only a 2.2 × difference between the best and worst performing samples. Selectivity, which is not a function of TOF, shows the most significant structure sensitivity effect where particle sizes follow the trend 67 nm ≈ 92 nm (58% EO) < 157 nm (67% EO) < 211–542 nm (73% EO). The lower EO selectivities were also correlated with increased fouling for the smaller Ag sizes, suggesting that more strongly bound EO precursor(s) leads to combustion and CO 2 /H 2 O formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial charge transfer in Pt-loaded TiO 2 P25 photocatalysts studied by in-situ diffuse reflectance FTIR spectroscopy of adsorbed CO

The efficiency of photocatalytic systems is strongly depending on the charge carrier transfer from the excited semiconductor to co-catalyst particles attached on its surface. In this study, we investigated the influence of photo-induced charge transfer in photoplatinized TiO 2 P25 photocatalysts by diffuse reflectance FTIR spectroscopy of CO molecules adsorbed on the Pt co-catalyst under well-defined gas phase conditions. In contrast to aqueous conditions, where shifts of the CO stretching vibration of up to 50 cm -1 have been reported, the observed shifts under gas phase conditions are very small (<1 cm -1 ). This demonstrates that the difference in dielectric properties between aqueous electrolytes and vacuum are critical for the development of prominent shifts of adsorbed CO bands upon trapping of photogenerated charge carriers on co-catalyst particles. The experimental findings are discussed in terms of an electrostatic Stark effect, charge screening, co-adsorption, coverage-dependent shifts of the vibrational bands of adsorbed CO and photocatalytic surface reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance and Durability of Hybrid Fuel Cell Systems for Class-8 Long Haul Trucks

Hybrid fuel cell-battery configurations are investigated that overcome thermal management issues in fuel cell powertrains for heavy-duty Class 8 trucks. The battery is sized so that it has sufficient capacity to provide supplemental power and energy on a hill climb transient at end-of-life. A dynamic load sharing strategy is developed to distribute the power demand between the fuel cell system (FCS) and the energy storage system in a manner that optimizes their lifetimes. The FCS end-of-life is identified as the terminal point beyond which the stack cannot generate the rated power with target power density at 0.7 V and 40 °C ambient temperature. Reaching the target lifetime with a-Pt/C cathode catalyst in one hybrid configuration requires voltage clipping to 813 mV, idle power limited to 50 kW, catalyst overloading to 0.45 mg cm -2 total Pt in anode and cathode, and 44% active membrane area oversizing. The stack and FCS drive cycle efficiencies decrease by 4.2% and 5.4%, respectively, during the electrode lifetime. Further, the FCS performance, durability and cost are compared with the targets of 68% peak efficiency, 0.30 mg cm -2 total Pt loading, 2.5 kW/g PGM Pt group metal (PGM) loading, 750 mW cm -2 power density, 25,000-h lifetime and $80/kW cost.

33 ADVANCED PROPULSION SYSTEMS↗

Patched bimetallic surfaces are active catalysts for ammonia decomposition

In this study, ammonia decomposition is often used as an archetypical reaction for predicting new catalytic materials and understanding the very reason of why some reactions are sensitive on material’s structure. Core–shell or surface-segregated bimetallic nanoparticles expose outstanding activity for many heterogeneously catalysed reactions but the reasons remain elusive owing to the difficulties in experimentally characterizing active sites. Here by performing multiscale simulations in ammonia decomposition on various nickel loadings on platinum (111), we show that the very high activity of core–shell structures requires patches of the guest metal to create and sustain dual active sites: nickel terraces catalyse N-H bond breaking and nickel edge sites drive atomic nitrogen association. The structure sensitivity on these active catalysts depends profoundly on reaction conditions due to kinetically competing relevant elementary reaction steps. We expose a remarkable difference in active sites between transient and steady-state studies and provide insights into optimal material design.

36 MATERIALS SCIENCE↗

Single-step conversion of cellulose to 5-hydroxymethylfurfural (HMF), a versatile platform chemical

The ability to use cellulosic biomass as feedstock for the production of fuels and chemicals currently derived from petroleum depends critically on the development of effective low-temperature processes. While HMF, as a versatile platform chemical suitable for use in polymer synthesis or production of liquid biofuels, can currently be made from fructose and glucose, synthesis of HMF directly from raw natural cellulose represents the last major barrier toward the development of a sustainable HMF platform. Here we report an unprecedented single-step pathway that depolymerizes cellulose rapidly under mild conditions and converts the resulting glucose to hydroxymethylfurfural (HMF). A pair of metal chlorides (CuCl2 and CrCl2) dissolved in 1-ethyl-3-methylimidazolium chloride at temperatures of 80-120°C catalyzes cellulose depolymerization and the subsequent glucose conversion to HMF with 95% selectivity among recoverable products (at 56% HMF yield). Cellulose depolymerization, which can also be catalyzed by other metalchloride pairs such as CuCl2 paired with PdCl2, CrCl3, or FeCl3, occurs at a rate that is more than one order of magnitude faster than conventional acid-catalyzed hydrolysis. In contrast, single-metal chlorides at the same total loading showed low activity under similar conditions. Mechanistic studies suggest that the C2 hydrogen of the imidazolium ring is activated by the paired metal-chloride catalysts.

02 PETROLEUM↗

Preparation, characterization and catalytic properties of MCM-48 supported tungstophosphoric acid mesoporous materials for green synthesis of benzoic acid

MCM-48 and tungstophosphoric acid (HPW) were prepared and applied for the synthesis of HPW/MCM-48 mesoporous materials. The characterization results showed that HPW/MCM-48 obtained retained the typical mesopore structure of MCM-48, and the textural parameters decreased with the increase loading of HPW. The catalytic oxidation results of benzyl alcohol and benzaldehyde with 30% H{sub 2}O{sub 2} indicated that HPW/MCM-48 was an efficient catalyst for the green synthesis of benzoic acid. Furthermore, 35 wt% HPW/MCM-48 sample showed the highest activity under the reaction conditions. Highlights: • 5–45 wt% HPW/MCM-48 mesoporous catalysts were prepared and characterized. • Their catalytic activities for the green synthesis of benzoic acid were investigated. • HPW/MCM-48 was approved to be an efficient catalyst. • 5 wt% HPW/MCM-48 exhibited the highest catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Silica-Supported Vanadium Oxide Catalysts by High-Field 51 V Magic-Angle Spinning NMR

Supported V2O5/SiO2 catalysts were studied using solid state 51V MAS NMR at a sample spinning rate of 36 kHz and at a magnetic field of 19.975 T for a better understanding of the coordination of the vanadium oxide as a function of environmental conditions . Structural transformations of the supported vanadium oxide species between the catalyst in the dehydrated state and hydrated state under an ambient environment were revisited to examine the degree of oligomerization and the effect of water. The experimental results indicate the existence of a single dehydrated surface vanadium oxide species that resonates at -675 ppm and two vanadium oxide species under ambient conditions that resonate at -566 and -610 ppm, respectively. No detectable structural difference was found as a function of vanadium oxide loading on SiO2 (3% V2O5/SiO2 and 8% V2O5/SiO2). Quantum chemistry simulations of the 51V NMR chemical shifts on predicted surface structures were used as an aide in understanding potential surface vanadium oxide species on the silica support. The results suggest the formation of isolated surface VO4 units for the dehydrated catalysts with the possibility of dimer and cyclic trimer presence. The absence of bridging V-O-V vibrations (~200-300 cm-1) in the Raman spectra [Gao et al. J. Phys. Chem. B 1998, 102, 10842-10852], however, indicates that the isolated surface VO4 sites are the dominant dehydrated surface vanadia species on silica. Upon exposure to water, hydrolysis of the bridging V-O-Si bonds is most likely responsible for the decreased electron shielding experienced by vanadium. No indicators for the presence of hydrated decavanadate clusters or hydrated vanadia gels previously proposed in the literature were detected in this study.

Environmental Molecular Sciences Laboratory↗

Rational Design of a Ni 3 N 0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium–Sulfur Batteries

Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. Here, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4 , the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.

25 ENERGY STORAGE↗

Long-Life Lithium-Sulfur Batteries with a Bifunctional Cathode Substrate Configured with Boron Carbide Nanowires

Developing high-energy-density lithium–sulfur (Li–S) batteries relies on the design of electrode substrates that can host a high sulfur loading and still attain high electrochemical utilization. Herein, a new bifunctional cathode substrate configured with boron-carbide nanowires in situ grown on carbon nanofibers (B 4 C@CNF) is established through a facile catalyst-assisted process. The B 4 C nanowires acting as chemical-anchoring centers provide strong polysulfide adsorptivity, as validated by experimental data and first-principle calculations. Meanwhile, the catalytic effect of B 4 C also accelerates the redox kinetics of polysulfide conversion, contributing to enhanced rate capability. As a result, a remarkable capacity retention of 80% after 500 cycles as well as stable cyclability at 4C rate is accomplished with the cells employing B 4 C@CNF as a cathode substrate for sulfur. Moreover, the B 4 C@CNF substrate enables the cathode to achieve both high sulfur content (70 wt%) and sulfur loading (10.3 mg cm -2 ), delivering a superb areal capacity of 9 mAh cm -2 . In addition, Li–S pouch cells fabricated with the B 4 C@CNF substrate are able to host a high sulfur mass of 200 mg per cathode and deliver a high discharge capacity of 125 mAh after 50 cycles.

25 ENERGY STORAGE↗

Correlation of Pt-Re Surface Properties with Reaction Pathways for the Aqueous-Phase Reforming of Glycerol

The surface properties of Pt-Re catalytic nano-particles supported on carbon following exposure to a hydrogen reducing environment and subsequent hydrothermal conditions have been studied using in-situ X-ray photoelectron spectroscopy (XPS) and ammonia temperature programmed desorption (TPD). These properties have been correlated with the catalyst selectivity for the aqueous phase reforming of glycerol. We show that Pt in reduced Pt-Re/C becomes electron deficient, and a fraction of the Re becomes oxidized when the catalyst is subsequently exposed to hydrothermal reaction conditions. Oxidation of Pt-Re generates surface acidity, which drastically affects the reaction pathways. The acid site concentration, but not acid site strength, increases with Re loading. This acidity increase with Re addition favors C-O over C-C cleavage, which results in higher selectivity to liquid products and alkanes at the expense of hydrogen production. We propose a model for the Pt-Re active site and the origin of acidity enhanced by the addition of Re.

08 HYDROGEN↗

Synthesis, Characterization, and Catalytic Performance of Highly Dispersed Co-SBA-15

Highly dispersed cobalt on SBA-15 was successfully prepared by a post synthesis grafting of cobalt. Of the cobalt precursors tested, Co(II) acetylacetonate was found to be the best source for high dispersion of cobalt. The Co-SBA-15 catalysts were characterized with different techniques: N2 physisorption, XRD, TPR, TEM, and X-ray adsorption analysis. The mesoporous structure of SBA-15 was retained after cobalt grafting with up to 10 wt % Co loading. There were no large cobalt oxide particles formed, which indicates all the cobalt ions are highly dispersed on the surface and the direct bonding to the silica surfaces results in a high reduction temperature (1123 K) relative to Co oxides. X-ray absorption analysis demonstrates a local structure of Co ions with all Co ions isolated and bonded with oxygen. XANES analysis requires that the local environment for Co ions be that of either a distorted tetrahedral or an octahedral structure and the fitting of EXAFS data further shows a Co-O bond coordination number of 3.58 {+-} 0.48, confirming that the Co is in a distorted tetrahedral environment. The catalytic activity of Co-SBA-15 catalyst was studied for the synthesis of carbon single walled nanotubes (SWNT). The high reduction stability of Co-SBA-15 is presumed to make a favorable catalyst for this high temperature reaction. Raman spectroscopy and TEM photographs show that good quality carbon SWNT was synthesized by Co-SBA-15. Moreover, Co-SBA-15 has a higher yield of carbon SWNT compared with Co-MCM-41 (C16 alkyl template) under the same reaction conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗