Search NASA⌕ Search

SEARCH · Search NASA

Results for “compression ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A wide range experimental study and further development of a kinetic model describing propane oxidation

This work presents an experimental and kinetic modeling study of propane oxidation. Ignition delay times of propane were measured in a high-pressure shock tube and in rapid compression machines in the temperature range 689 - 1700 K at equivalence ratios of 0.5, 1.0 and 2.0 in 'air', for a wide range of pressures from 20 to 90 bar. CO and H 2 O mole fraction profiles for propane oxidation were measured in a shock tube behind reflected shock waves in the temperature range 1370-1840 K at equivalence ratios of 0.5, 1.0 and 2.0 and at a pressure of approximately 1.3 atm. Moreover, propane oxidation was studied using a jet-stirred reactor coupled to a synchrotron vacuum ultraviolet photoionization mass spectrometer at low temperatures in the range 565 - 690 K and at a pressure of 1 atm. Further, this wide range of experimental datasets for propane oxidation was used to reoptimize and update our previous kinetic mechanisms, AramcoMech3.0 and NUIGMech1.1. In the current mechanism, NUIGMech1.3, the thermo-chemical parameters of all species relevant to low-temperature propane oxidation chemistry, including propyl-peroxyl, hydroperoxyl-propyl, hydroperoxyl-propyl-peroxyl, and carbonyl-hydroperoxide radicals, are updated based on newly calculated values at the CCSD(T)-F12/TZ-F12//B2PLYPD3/TZ///B2PLYP-D3/TZ level of theory. The improvements made in the thermochemical values and in the kinetic parameters for the low-temperature propane oxidation reactions in NUIGMech1.3 result in better model agreement with the new IDTs and speciation data, including carbon monoxide, formaldehyde, propene, acetaldehyde and various minor products such as ethylene, acetic acid, acrolein as well as various hydroperoxide and cyclic ether species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ignition of contaminants by impact of high-pressure oxygen

The ignition of oil-film contaminants in high-pressure gaseous oxygen systems, caused by rapid pressurization, was investigated using the NASA/White Sands Test Facility's large-volume pneumatic impact test system. The test section consisted of stainless steel lines, contaminated on the inside surface with known amounts of Mobil DTE 24 oil and closed at one end, which was attached to a high-pressure oxygen system; the test section was pressurized to 48 MPa by opening a high-speed valve. Ignition of the oil was detected by a photocell attached to the closed end of the line. It was found that the frequency of ignition increased as a function of both the concentration of oil and of the pressure of the impacting oxygen. The threshold of ignition was between 25 and 65 mg/sq m. The results were correlated with the present NASA and Compressed Gas Association requirements for maximum levels of organic contaminants.

Pedley, Michael D.↗

Efficient turbine engine using integrated ammonia fuel processing

A gas turbine engine includes a core engine that includes a core flow path where air is compressed in a compressor section, communicated to a combustor section, mixed with an ammonia based fuel and ignited to generate a high energy combusted gas flow that is expanded through a turbine section. The turbine section is mechanically coupled to drive the compressor section. An ammonia flow path communicates an ammonia flow to the combustor section. A cracking device is disposed in the ammonia flow path. The cracking device is configured to decompose the ammonia flow into a fuel flow containing hydrogen (H2). At least one heat exchanger is upstream of the cracking device that provides thermal communication between the ammonia flow and a working fluid flow such that the ammonia fluid flow accepts thermal energy from the working fluid flow.

Smith, Lance L.↗

Water separator for hydrogen steam injected turbine engine

A propulsion system for an aircraft includes a core engine that includes a core flow path where air is compressed in a compressor section, communicated to a combustor section, mixed with a hydrogen based fuel and ignited to generate a core gas flow that is expanded through a turbine section. The propulsion system includes a hydrogen fuel system that is configured to supply hydrogen fuel to the combustor through a fuel flow path, a condenser that is arranged along the core flow path and configured to condense water within the core gas flow, and a separator that includes an inlet, a primary water outlet and an exit that includes a plurality of exit guide vanes for straightening the core gas flow that proceeds through the exit. The exit guide vanes include a secondary water outlet for removing condensed water in the core gas flow that proceeds through the exit.

Terwilliger, Neil J.↗

Compressed Natural Gas Vehicle Maintenance Facility Modification Handbook

To ensure the safety of personnel and facilities, vehicle maintenance facilities are required by law and by guidelines of the National Fire Protection Association (NFPA) and the International Fire Code (IFC) to exhibit certain design features. They are also required to be fitted with certain fire protection equipment and devices because of the potential for fire or explosion in the event of fuel leakage or spills. All fuels have an explosion or fire potential if specific conditions are present. The hazard presented by liquid fuels, such as gasoline and diesel, results from the spillage of these liquids and subsequent ignition of vapors, causing a fire or explosion. Facilities that maintain liquid-fueled vehicles and implement appropriate safety measures are protected with ventilation systems designed to capture liquid fuel vapors at or near floor level. To minimize the potential for ignition in the event of a spill, receptacles, electrical fixtures, and hot-work operations, such as welding, are located outside of these areas. Compressed natural gas (CNG) is composed of methane with slight amounts of heavier simple hydrocarbons. Maintenance facilities that maintain CNG vehicles indoors must be protected against fire and explosion. However, the means of ensuring safety are different from those employed for liquid fuels because of the gaseous nature of methane and the fact that it is lighter than air. Because CNG is lighter than air, a release will rise to the ceiling of the maintenance facility and quickly dissipate rather than remaining at or near floor level like liquid fuel vapors. Although some of the means of protection for CNG vehicle maintenance facilities are similar to those used for liquid-fueled vehicles (ventilation and elimination of ignition sources), the types and placement of the protection equipment are different because of the behavior of the different fuels. The nature of gaseous methane may also require additional safeguards, such as combustible gas detectors and control systems, or specialized space heating, which are not needed in facilities servicing liquid-fuel vehicles. This handbook covers maintenance facilities that service CNG-fueled vehicles. Although similar requirements are mandated for liquefied natural gas (LNG) or liquefied petroleum gas (LPG) fueled vehicles, LNG and LPG are not covered in this handbook.

30 DIRECT ENERGY CONVERSION↗

Design and analysis of dudded fuel experiments at the National Ignition Facility

Recent experiments conducted at the National Ignition Facility (NIF) within the past 2 years have achieved the burning plasma state and exceeded the Lawson criterion for the first time in the laboratory. Here, we report on a set of experiments where the deuterium and tritium (DT) ice layers were replaced with dudded tritium, hydrogen, and deuterium (THD) fuel mixtures to remove the influence of alpha-heating on hot spot dynamics. The hot spot compression and yield in the absence of alpha particle self-heating were measured to assess the proximity of NIF implosions toward the ignition cliff. We find that the “burn-off” Lawson parameters χnoα inferred from the THD experiments are in good agreement with the inferences from postshot simulations of the DT-layered implosions. The THD for burning plasma shot N210307 yielded χnoα≈0.88±0.03 while the THD for ignition shot N210808 yielded χnoα≈1.04±0.04. These results also provide important context for the observed variability in the repeat attempts of ignition shot N210808 since implosions on the ignition cliff are expected to exhibit very large variations in the fusion yield from small changes in the initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic modeling study of surrogate components for gasoline, jet and diesel fuels: C7-C11 methylated aromatics

Kinetic mechanisms for aromatics are needed to successfully simulate the autoignition of transportation fuels using the surrogate fuel approach. An aromatic detailed kinetic mechanism that describes kinetics of C7-C11 methylated aromatics, including toluene, o-xylene, p-xylene, 1,2,4-trimethylbenzene, 1,3,5, trimethyl-benzene and alpha-methylnaphthalene has been developed in the current study. The kinetic mechanism was built hierarchically using similar set of reaction pathways and reaction rate rules. In the mechanism developed, special emphasis is put on describing the detailed low-temperature ignition chemistry of o-xylene and 1,2,4-trimethylbenzene and, to our knowledge, this is the first attempt to do so in a detailed kinetic mechanism. In addition to kinetic modeling, new experimental data were acquired for toluene, o-xylene, and 1,2,4-trimethylbenzene using a rapid compression machine at low-to-intermediate temperatures and engine relevant pressures. In addition, the mechanism has been compared against data sets from the literature covering ignition delay times, flame speeds, and speciation profiles measured in a jet-stirred reactor and flow reactor. Good agreement is observed between the mechanism predictions and the experimental data. Kinetic analysis demonstrated the importance of including the low temperature chemistry of the benzylperoxy radicals to accurately capture the ignition propensity of o-xylene and 1,2,4-trimethylbenzene at low-to-intermediate temperatures and high pressures. The kinetic mechanism developed in the current study can be used for surrogate modeling of gasoline, jet and diesel fuels. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

02 PETROLEUM↗

Mathematical Models and Numerical Methods for High-Fidelity Simulation of Ignition of Reactive Mixtures by Nanosecond Plasma Discharges in Realistic Configurations

We present a newly developed framework for the numerical simulation of ignition of reactive mixtures using single or repeated nanosecond discharge pulses. The framework builds upon the AMReX library, using the existing compressible solver PeleC and low-Mach solver PeleLMeX and allowing for adaptive mesh refinement, complex geometries, and execution on next-generation high-performance computing (HPC) systems. High-fidelity elementary models are adopted for weakly-ionised plasma discharges with significant energy deposition, consistent with nanosecond discharge pulses, and then implemented in the solver. The treatment of non-thermal electrons and charged species, thermodynamics of non-equilbrium species, plasma kinetics, limiting time scales, and boundary conditions for charged species are discussed and addressed for computational efficiency. The framework is demonstrated for three relevant applications: single and multi-pulse discharges in air, single pulse ignition of an ethylene/air mixture, and a three-dimensional plasma discharge in air with temperature stratification. The successful application of the framework demonstrates the feasibility of high-fidelity simulation of ignition of air/hydrocarbon mixtures in three-dimensions with multiple discharge pulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduced mixing in inertial confinement fusion with early-time interface acceleration

In inertial confinement fusion (ICF) implosions, the interface between the cryogenic DT fuel and the ablator is unstable to shock acceleration (the Richtmyer-Meshkov instability, RM) and constant acceleration (Rayleigh-Taylor instability, RT). Instability growth at this interface can reduce the final compression, limiting fusion burnup. If the constant acceleration is in the direction of the lighter material (negative Atwood number), the RT instability produces oscillatory motion that can stabilize against RM growth. Theory and simulations suggest this scenario occurred at early times in some ICF experiments on the National Ignition Facility, possibly explaining their favorable performance compared to one-dimensional simulations. In conclusion, this characteristic is being included in newer, lower adiabat designs, seeking to improve compression while minimizing ablator mixing into the fuel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic strength of iron under pressure-temperature conditions of Earth’s inner core

Iron (Fe) is a primary constituent of terrestrial planetary cores, yet its rheological properties under extreme conditions remain uncertain. Here we present direct measurements of Fe strength at 310-430 GPa pressures and 3700-5800 K temperatures, obtained using Rayleigh-Taylor (RT) instability experiments at the National Ignition Facility. Single-crystal α-Fe samples with [001] and [111] orientations are shock-ramp compressed past the α-ε transition along paths approaching Earth’s inner core conditions. We find that ε-Fe derived from [001] α-Fe is consistently stronger (11-20 GPa) than that from [111] α-Fe (8-18 GPa), contrary to the trend at ambient conditions. Large-scale molecular dynamics simulations reproduce this atypical strength anisotropy and attribute it to microstructural evolution during the phase transition and subsequent ε-phase plasticity. Ripple growth analysis further constrains viscosities of 100-170 Pa·s under the driven conditions. Our results provide experimental benchmarks for Fe rheology at inner-core conditions, with implications for seismic anisotropy and the geodynamo.

Condensed-matter physics↗

Advancing the mechanical integrity and fragmentation behavior of reactive projectiles

A multivariant statistical approach was used to identify treatment conditions that improve the survivability of structural reactive material (SRM) projectiles upon launch and enhance energy release upon impact. The study included both mechanical testing of projectiles as well as their reactive characterization. The projectiles were launched in a high-velocity impact-ignition testing system and impacted an anvil for vented chamber calorimetry. This study examined a link between ultimate compressive stress and combustion performance. Two treatments were applied to consolidated aluminum projectiles including annealing and addition of silica (SiO 2 ) inclusions. Results showed annealing at moderate temperatures resulted in intact SRM projectiles upon launch. Adding small concentrations (1–2 wt. %) of SiO 2 to the SRM promoted fragmentation and combustion performance upon impact. Compared to the untreated projectiles, annealing with SiO 2 inclusion processing treatments improved the energy conversion efficiency from 37–84% (for untreated projectiles) up to 54–98%. In conclusion, increasing interparticle dislocation recovery by annealing while balancing inclusions promoting fragmentation upon impact was the key to optimizing combustion performance for SRM ballistic impact applications.

42 ENGINEERING↗

A glimpse of stars the size of dust particles

The Nuclear Imaging System (NIS) is an important diagnostic tool used to study nuclear fusion implosions at a research facility in California. There a capsule the size of a flea is compressed until it reaches the size of a speck of dust. As the capsule collapses on itself and ignites under extreme temperature and pressure, NIS detects particles emitted from that process at a scale that would correspond to watching a 32-inch TV screen from 100 miles away. My work involves taking snapshots of one of the most minuscule, fleeting and amazing experiments on Earth in order to ensure the safety and reliability of the US nuclear stockpile and get closer to developing a new form of clean energy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Detonation duct gas generator demonstration program

The feasibility of the generation of detonation waves moving periodically across high speed channel flow is experimentally demonstrated. Such waves are essential to the concept of compressing requirements and increasing the engine pressure compressor with the objective of reducing conventional compressor requirements and increasing the engine thermodynamic efficiency through isochoric energy addition. By generating transient transverse waves, rather than standing waves, shock wave losses are reduced by an order of magnitude. The ultimate objective is to use such detonation ducts downstream of a low pressure gas turbine compressor to produce a high overall pressure ratio thermodynamic cycle. A 4 foot long, 1 inch x 12 inch cross-section, detonation duct was operated in a blow-down mode using compressed air reservoirs. Liquid or vapor propane was injected through injectors or solenoid valves located in the plenum or the duct itself. Detonation waves were generated when the mixture was ignited by a row of spark plugs in the duct wall. Problems with fuel injection and mixing limited the air speeds to about Mach 0.5, frequencies to below 10 Hz, and measured pressure ratios of about 5 to 6. The feasibility of the gas dynamic compression was demonstrated and the critical problem areas were identified.

Wortman, Andrew↗

2D axisymmetric analysis of SRM ignition transient

To analyze ignition transient of Space Shuttle solid rocket motor, a transient two-dimensional numerical model based on turbulent compressible Navier-Stokes equations in a generalized coordinate system was developed. One-dimensional numerical models (Peretz et al., 1973; Han, 1992; Pardue and Han, 1992) with empirical correlations data obtained from steady turbulent boundary layer flows agrees reasonably well with test rocket data by adjusting a few parameters. However, a 1D model can not provide a physical insight into the complex multidimensional thermal fields and flowfields in the chamber and the converging-diverging rocket nozzle. As an interim step, a 2D model was developed and compared with test data. A modified version of SIMPLE algorithm was used for the numerical model, and the standard k-epsilon model with a wall function was used for turbulence closure. Transient flowfields and thermal fields in the combustion chamber and the attached nozzle were obtained for a selected rocket geometry and propellant. Transient behaviors of the flow and thermal fields were analyzed, and were found to be in good agreement with physical expectations.

Bai, S. D.↗

Soft x-ray images of the laser entrance hole of ignition hohlraums

Hohlraums are employed at the national ignition facility to convert laser energy into a thermal x-radiation drive, which implodes a fusion capsule, thus compressing the fuel. The x-radiation drive is measured with a low spectral resolution, time-resolved x-ray spectrometer, which views the region around the hohlraum's laser entrance hole. This measurement has no spatial resolution. To convert this to the drive inside the hohlraum, the size of the hohlraum's opening ('clear aperture') and fraction of the measured x-radiation, which comes from this opening, must be known. The size of the clear aperture is measured with the time integrated static x-ray imager (SXI). A soft x-ray imaging channel has been added to the SXI to measure the fraction of x-radiation emitted from inside the clear aperture. A multilayer mirror plus filter selects an x-ray band centered at 870 eV, near the peak of the x-ray spectrum of a 300 eV blackbody. Results from this channel and corrections to the x-radiation drive are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Understanding the low-temperature chemistry of 1,2,4-trimethylbenzene

1,2,4-trimethylbenzene is an important representative aromatic component of gasoline/diesel/jet fuels and thus it is necessary to understand its low-temperature chemistry. In this paper, ignition delay times (IDTs) of both 1,2,4-trimethylbenzene (124TMB) and its blends with n -heptane were measured at engine-like conditions using both a high-pressure shock tube and a rapid compression machine for fuel in ‘air’ mixtures at pressures of 10 and 30 atm and at temperatures in the range 600 – 1100K. The experiments in this study show for the first time that 124TMB presents a two-stage ignition behavior at engine relevant conditions. Blending n -heptane with 124TMB can significantly increase mixture reactivity at temperatures below 1000K. A new detailed mechanism has been developed to simulate the experimentally measured IDT data. The mechanism can capture well the two-stage ignition behavior as well as the ignition delays at different pressures, equivalence ratios over a wide temperature range, for both pure fuels and their blended mixtures. Flux analyses show that the benzylic radicals (formed via H-atom abstraction from the methyl groups ortho-sites on 124TMB) can add to O 2 forming $\mathrm{R\dot{O}_2}$ radicals, which can isomerize to $\dot{Q}$OOH by intramolecular H-atom transfer from the ortho- methyl group and these $\dot{Q}$OOH radicals undergo a second addition to O 2 . This is analogous to the chain branching reaction pathways of alkanes. The chain branching reaction pathways are responsible for the first-stage heat release of 124TMB. In conclusion, the competitions between chain branching and both chain propagating and chain termination reaction pathways lead to a less pronounced negative temperature coefficient (NTC) behavior for 124TMB oxidation, compared to two-stage ignition behavior observed for alkanes and other fuels.

1,2,4-trimethylbenzene↗

An experimental and detailed kinetic modeling study of the pyrolysis and oxidation of allene and propyne over a wide range of conditions

Allene and propyne are important intermediates in the pyrolysis and oxidation of higher hydrocarbon fuels, and they are also a major source of propargyl radical formation, which can recombine into different C 6 H 6 isomers and finally produce soot. In a prior work (Panigrahy et al., “A comprehensive experimental and improved kinetic modeling study on the pyrolysis and oxidation of propyne”, Proc. Combust. Inst 38 (2021)), the pyrolysis, ignition , and laminar flame speed of propyne were investigated. To understand the kinetic features of initial fuel breakdown and oxidation of the two C 3 H 4 isomers, new measurements for allene pyrolysis and oxidation are conducted in the present paper at the same operating conditions as those studied previously for propyne. Ignition delay times of allene are measured using a high-pressure shock tube and a heated twin-opposed piston rapid compression machine in the temperature range 690– 1450 K at equivalence ratios of 0.5, 1.0 and 2.0 in ‘air’, and at pressures of 10 and 30 bar. Pyrolysis species measurements of allene and propyne are also performed using a gas chromatography integrated singlepulse shock tube in the temperature range 1000–1700 K at pressure of 2 and 5 bar. Furthermore, laminar flame speeds of allene are measured at elevated gas temperatures of 373 K at pressures of 1 and 2 bar for a wide range of equivalence ratios from 0.6 to 1.5. A newly updated kinetic mechanism developed for this study is the first model that can well reproduce all of the experimental results for both allene and propyne. It is observed that in the pyrolysis process, allene dissociates faster than propyne. Both isomers exhibit similar ignition delay times at high temperatures (>1000 K), while, at intermediate temperatures (770–1000 K) propyne is the faster to ignite, and at lower temperatures (< 770 K) allene becomes more reactive. Furthermore, laminar flame speeds for propyne are found to be slightly faster than those for allene under the conditions studied in this work

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗