Search NASA⌕ Search

SEARCH · Search NASA

Results for “controllability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Numerical Evaluation of Entry System Trajectory Control via Active Porosity Control of Transpiration Cooled Thermal Protection System

As space exploration expands, atmospheric descent requirements will tighten to improve landing accuracy to areas of interest. One way to meet higher landing accuracy requirements is by increasing vehicle maneuverability. This study explores the concept of manipulating a transpiration cooling scheme for entry capsules that could provide both active aerodynamic control as well as thermal protection for external surfaces. Numerical methods of fluid dynamics and heat transfer are presented to study the effectiveness of the concept in both thermal protection and entry vehicle attitude control. This effort works through development of an entry vehicle model at aeromaneuvering conditions with designated boundary activated for effects of transpiration cooling. Preliminary results show calculated values of heat flux and aerodynamic forces as a function of varying transpiration cooling flow rates. This contributes evidence of asymmetric cooling utilization as an additional mechanism for vehicle attitude control.

Caroline Anderson↗

Microstructure Controlled Multi-Layer Porous Material Liner Tested On The Advanced Noise Control Fan

A novel concept of multilayer micro structurally controlled noise mitigation porous material was developed and experimentally validated in the laboratory by normal incidence impedance test. Extensive parametric studies were made to understand various parameters that influence acoustic absorption and transmission loss based on the test specimen size, particle size, porosity, pore size, and its distribution through the thickness. The results were reported in many publications. This work was focused on applying the concept and assessing the validity of the technology to aircraft turbomachine engines. The NASA Glenn Research Center’s Advanced Noise Control Fan (ANCF) low-speed test rig was selected. The liner insert required a 4-ft internal diameter cylinder with a 2-inch thick and 9-inch axial length. The liner was fabricated in eight segments and assembled in an aluminum test rig. The liner was tested for both tonal and broadband noise at the Notre Dame Turbomachinery Lab White Field test facility, where the ANCF is located. The study concludes that: Microstructurally controlled porous material is very effective in dissipating the sound energy; the liner is effective for tonal noise (2 to 13 dB reduction in noise levels) that constitutes the major part of the overall fan noise, especially the blade passing frequency which is generally the dominating component; Also, the liner is effective for broadband noise with reductions in sound pressure level of about 3 dB for the shaft order greater than 20. The proposed two-layer liner model demonstrated the validity of the concept. More studies are required to optimize the design.

Liner↗

Process control monitoring systems, industrial plants, and process control monitoring methods

A system comprises a valve; a plurality of RFID sensor assemblies coupled to the valve to monitor a plurality of parameters associated with the valve; a control tag configured to wirelessly communicate with the respective tags that are coupled to the valve, the control tag being further configured to communicate with an RF reader; and an RF reader configured to selectively communicate with the control tag, the reader including an RF receiver. Other systems and methods are also provided.

Skorpik, James R↗

Modeling and control of thermostatically controlled loads

As the penetration of intermittent energy sources grows substantially, loads will be required to play an increasingly important role in compensating the fast time-scale fluctuations in generated power. Recent numerical modeling of thermostatically controlled loads (TCLs) has demonstrated that such load following is feasible, but analytical models that satisfactorily quantify the aggregate power consumption of a group of TCLs are desired to enable controller design. We develop such a model for the aggregate power response of a homogeneous population of TCLs to uniform variation of all TCL setpoints. A linearized model of the response is derived, and a linear quadratic regulator (LQR) has been designed. Using the TCL setpoint as the control input, the LQR enables aggregate power to track reference signals that exhibit step, ramp and sinusoidal variations. Although much of the work assumes a homogeneous population of TCLs with deterministic dynamics, we also propose a method for probing the dynamics of systems where load characteristics are not well known.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Distributed Power Flow Control: Distributed Power Flow Control using Smart Wires for Energy Routing

GENI Project: Smart Wire Grid is developing a solution for controlling power flow within the electric grid to better manage unused and overall transmission capacity. The 300,000 miles of high-voltage transmission line in the U.S. today are congested and inefficient, with only around 50% of all transmission capacity utilized at any given time. Increased consumer demand should be met in part with more efficient and an economical power flow. Smart Wire Grid’s devices clamp onto existing transmission lines and control the flow of power within—much like how internet routers help allocate bandwidth throughout the web. Smart wires could support greater use of renewable energy by providing more consistent control over how that energy is routed within the grid on a real-time basis. This would lessen the concerns surrounding the grid’s inability to effectively store intermittent energy from renewables for later use.

ARPA-E↗

Control assembly for controlling a fuel cell system during shutdown and restart

A fuel cell system and method in which the fuel cell system receives and an input oxidant gas and an input fuel gas, and in which a fuel processing assembly is provided and is adapted to at least humidify the input fuel gas which is to be supplied to the anode of the fuel cell of the system whose cathode receives the oxidant input gas via an anode oxidizing assembly which is adapted to couple the output of the anode of the fuel cell to the inlet of the cathode of the fuel cell during normal operation, shutdown and restart of the fuel cell system, and in which a control assembly is further provided and is adapted to respond to shutdown of the fuel cell system during which input fuel gas and input oxidant gas cease to be received by the fuel cell system, the control assembly being further adapted to, when the fuel cell system is shut down: control the fuel cell system so as to enable a purging gas to be able to flow through the fuel processing assembly to remove humidified fuel gas from the processing assembly and to enable a purging gas to be able to flow through the anode of the fuel cell.

30 DIRECT ENERGY CONVERSION↗

Control of Plasma-Stored Energy for Burn Control using DIII-D In-Vessel Coils

A new approach has been experimentally demonstrated to control the stored energy by applying a non-axisymmetric magnetic field using the DIII-D in-vessel coils to modify the energy confinement time. In future burning plasma experiments as well as magnetic fusion energy power plants, various concepts have been proposed to control the fusion power. The fusion power in a power plant operating at high gain can be related to the plasma-stored energy and hence, is a strong function of the energy confinement time. Thus, an actuator, that modifies the confinement time, can be used to adjust the fusion power. In relatively low collisionality DIII-D discharges, the application of non-axisymmetric magnetic fields results in a decrease in confinement time and density pumpout. Gas puffing was used to compensate the density pumpout in the pedestal while control of the stored energy was demonstrated by the application of non-axisymmetric fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controller for thermostatically controlled loads

A system and method of controlling aggregated thermostatically controlled appliances (TCAs) for demand response is disclosed. A targeted load profile is formulated and a forecasted load profile is generated. The TCAs within an "on" or "off" control group are prioritized based on their operating temperatures. The "on" or "off" status of the TCAs is determined. Command signals are sent to turn on or turn off the TCAs.

25 ENERGY STORAGE↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

97 MATHEMATICS AND COMPUTING↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

97 MATHEMATICS AND COMPUTING↗

Intrinsic use control for system and use controlled component security

An Initialization Unit (IU) initiates an initial secure connection with an Intrinsic Use Control (IUC) Chip based on very large random numbers (VLRNs). The IUC Chip in turn initiates a secondary secure connection between it and one or more Use Controlled Components (UCCs). Polling by the IU allows confirmation of an ongoing secure connection, and also allows the IUC Chip to confirm the secondary secure connection to the UCCs. Removal or improper polling response from one of the UCCs results in a response from the IUC Chip that may include notification of tampering, or temporary or permanent discontinued operation of the offending UCC. Permanent discontinued operation may include destruction of the offending UCC, and cascaded discontinued operation of all other UCCs secured by the IUC Chip. A UCC may in turn be another nested layer of IUC Chips, controlling a corresponding layer of UCCs, ad infinitum.

Hart, Mark Miles↗

Method for controlling fiber growth in a laser heated pedestal growth system by controlling a laser power output, a pedestal feedstock rate of motion, and a draw rate

One or more embodiments relate to a method for controlling fiber growth and fiber diameter in a laser heated pedestal growth (LHPG) system so as to provide long, continuous single-crystal optical fibers of uniform diameter. The method generally provides three independent parameter feedback controls to control the molten zone height, laser power, and fiber drawing rates simultaneously in order to reduce the mismatch between instantaneous diameter changes and current diameter. The method permits the growth of fibers with non-uniform diameters along the fiber's length. The method also provides the capability to stop the LHPG system, remove the exhausted pedestal feedstock with a second pedestal feedstock, and restart the LHPG system to provide a continuous fiber.

Buric, Michael P.↗

Anomalies of the fissile mass control inside a controlled geometry leading to important safety issues - 14298

This article focuses on the very usual case of the fissile mass control inside a controlled geometry, whatever the fissile density in the fissile-moderator mixture is. Although this case is very usual (maximal loading of fissile material in a transport cask, maximal fissile content in a 'geometrically favorable' tank, etc.), some unexpected behaviors ('anomalies') may be met, leading to important nuclear criticality safety issues. This article will show the three following anomalies and the associated safety issues: - the 'non-smooth' variation of the minimum critical mass for a small variation of the geometry size (a cylinder case is considered throughout this article), - the very important differences in critical values, for intermediate-size geometries, between two fissile media having very close minimum critical masses and dimensions, - the change in the hierarchy of different fissile media when the size of the geometry changes. The next part of the article will demonstrate that these anomalies are, from a physics point of view, due to the nature of the fissile material and, from a methodology point of view, due to the fact that this 'Mass- Geometry Control' problem is generally solved without looking at the critical mass for the whole range of geometries. The latter happens because this whole resolution is not trivial and requires either a lot of calculations or human effort to estimate the mass limits as a function of the geometry. Another article will discuss this question of the 'whole' resolution of the problem. (authors)

42 ENGINEERING↗

Adaptive vibration control using synchronous demodulation with machine tool controller motor commutation

A control system and method for actively reducing vibration in a spindle housing caused by unbalance forces on a rotating spindle, by measuring the force-induced spindle-housing motion, determining control signals based on synchronous demodulation, and provide compensation for the measured displacement to cancel or otherwise reduce or attenuate the vibration. In particular, the synchronous demodulation technique is performed to recover a measured spindle housing displacement signal related only to the rotation of a machine tool spindle, and consequently rejects measured displacement not related to spindle motion or synchronous to a cycle of revolution. Furthermore, the controller actuates at least one voice-coil (VC) motor, to cancel the original force-induced motion, and adapts the magnitude of voice coil signal until this measured displacement signal is brought to a null. In order to adjust the signal to a null, it must have the correct phase relative to the spindle angle. The feedback phase signal is used to adjust a common (to both outputs) commutation offset register (offset relative to spindle encoder angle) to force the feedback phase signal output to a null. Once both of these feedback signals are null, the system is compensating properly for the spindle-induced motion.

47 OTHER INSTRUMENTATION↗

Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

A battery control system for hybrid vehicle includes a hybrid powertrain battery, a vehicle accessory battery, and a prime mover driven generator adapted to charge the vehicle accessory battery. A detecting arrangement is configured to monitor the vehicle accessory battery's state of charge. A controller is configured to activate the prime mover to drive the generator and recharge the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a first predetermined level, or transfer electrical power from the hybrid powertrain battery to the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a second predetermined level. The invention further includes a method for controlling a hybrid vehicle powertrain system.

33 ADVANCED PROPULSION SYSTEMS↗

Rapid synthesis and size control of CuInS2 semi-conductor nanoparticles using microwave irradiation

The properties of CuInS2 semi-conductor nanoparticles make them attractive materials for use in next-generation photovoltaics. We have prepared CuInS2 nanoparticles from single source precursors via microwave irradiation. Microwave irradiation methods have allowed us to increase the efficiency of preparation of these materials by providing uniform heating and rapid reaction times. The synergistic effect of varying thiol capping ligand concentrations as well as reaction temperatures and times resulted in fine control of nanoparticle growth in the 3–5 nm size range. Investigation of the photophysical properties of the colloidal nanoparticles were performed using electronic absorption and luminescence emission spectroscopy. Qualitative nanoparticles sizes were determined from the photoluminescence (PLE) data and compared to HRTEM images.

14 SOLAR ENERGY↗