Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Multispecies Diffusion Capability For The AMP Nuclear Fuel Performance Code (LANL Milestone M31MS060301 Final Report)

This work addresses only diffusion. The contact solver in AMP was not sufficiently developed this year to attempt treatment of species contact. A cylindrical tensor diffusion coefficient model was added to the AMP code, with the KHHS model [1] implemented into the AMP material library as a specific example. A cylindrical tensor diffusion operator manufactured solution verification example was coded. Before meeting the full text of the milestone task, it remains to: (1) code and run a cylindrical tensor diffusion solver manufactured solution (2) code and run the validation example of [1] (3) document results. These are dependent on developing new capabilities for the AMP code requiring close collaboration with the AMP team at ORNL. The model implemented provides a good intermediate first step toward a general multi-species solver. The multi-species capability of the AMP nuclear fuel code [2] is intended to allow the modeling of radiation-driven redistribution of various elements through solid metal nuclear reactor fuels. The initial model AMP provides for U-Pu-Zr fuels is based on the analysis of the Integral Fast Reactor (IFR) fuel development program experiment X419 post-irradiation data described in [1], referred to here as the KHHS model. This model may be specific to that experiment, but it was thought to provide a good start for the AMP code, because it (1) is formulated at the engineering scale, (2) decouples the species from each other, (3) predetermines the phase boundaries so that reference to a phase diagram is not needed, and (4) one of the authors (Hayes) was the NEAMS Fuels IPSC manager for FY11. The KHHS model is formulated for radial fluxes as little axial redistribution is seen experimentally. As U-Pu-Zr fuel is irradiated, the constituents migrate to form three annular regions. The center region is Zr-enriched and U-depleted, the middle region is Zr-depleted and U-enriched, and the outer region is Zr-enriched and U-depleted. The Pu concentration stays roughly constant throughout with slight enrichment in the center and depletion near the surface. Pu acts as a solvent for the mixture. The experiment was only run to 1.9% burnup, so the model is not at this time applicable to the high-burnup scenarios that the AMP code is intended to eventually model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model for Humidity-Mediated Diffusion on Aluminum Surfaces and Its Role in Accelerating Atmospheric Aluminum Corrosion

Bare aluminum metal surfaces are highly reactive, which leads to the spontaneous formation of a protective oxide surface layer. Because many subsequent corrosive processes are mediated by water, the structure and dynamics of water at the oxide interface are anticipated to influence corrosion kinetics. Here, using molecular dynamics simulations with a reactive force field, we model the behavior of aqueous aluminum metal ions in water adsorbed onto aluminum oxide surfaces across a range of ion concentrations and water film thicknesses corresponding to increasing relative humidity. We find that the structure and diffusivity of both the water and the metal ions depend strongly on the humidity of the environment and the relative height within the adsorbed water film. Aqueous aluminum ion diffusion rates in water films corresponding to a typical indoor relative humidity of 30% are found to be more than 2 orders of magnitude slower than self-diffusion of water in the bulk limit. Connections between metal ion diffusivity and corrosion reaction kinetics are assessed parametrically with a reductionist model based on a 1D continuum reaction–diffusion equation. Our results highlight the importance of incorporating the properties specific to interfacial water in predictive models of aluminum corrosion.

36 MATERIALS SCIENCE↗

Demonstrate Improved Ag Diffusion and Describe the Basis for Pd Penetration Modeling in SiC

In past work, an effective diffusivity coefficient was determined for Ag transport through the silicon carbide layer of a tristructural isotropic fuel particle. The effective diffusivity coefficient accounts for the microstructure of the silicon carbide and includes both bulk diffusion and grain boundary diffusion of Ag. In this report, the model has been improved by accounting for the enhanced concentration of vacancies in the bulk due to irradiation, which substantially influence bulk diffusivity at low temperatures. To improve the BISON model and make it fission rate dependent, effective diffusivity calculations have been performed that incorporate the radiation modified bulk diffusivity. The microstructure and irradiation-dependent effective diffusivity has also been implemented into BISON, and its predictions for Ag release from tristructural isotropic fuel have been successfully compared to AGR-1 post irradiation measurements. Moreover, a new feature has been developed in the Multiphysics Object-Oriented Simulation Environment (MOOSE) to account for different grain boundary types. The Ag diffusivity in 5 (210)/[001] grain boundaries has been computed and was found to be greater than in random high-angle grain boundaries. The presence of the fission product Pd can also have an important effect on the properties of the silicon carbide layer in tristructural isotropic particles. The penetration of Pd into the silicon carbide layer causes a corrosion reaction that can lead to the failure of the silicon carbide layer; however, this corrosion reaction is not well understood. To enable an improved understanding of the mechanism, ab-initio molecular dynamics simulations of Pd interaction with bulk silicon carbide have been performed. The improved understanding of the reaction will form a basis for future improvements to the BISON’s Pd penetration failure model

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Geometry of Non-Diffusive Tracer Transport in Gridded Atmospheric Models

A first-order linear and numerically non-diffusive Eulerian transport algorithm, minVAR, was recently developed for preservation of correlations between interrelated tracers during advective transport. The present study extends this work by: (1) providing further investigation of several interesting geometric constructions found in contours of constant minVAR, short for minimum variance, through extension to three coordinate dimensions. These contours capture point-by-point representations of thousands of individual atmospheric aerosol and/or cloud particles as they evolve and are rendered on Eulerian grids at a level of sub-grid resolution limited only by numerical precision; and (2) exploration of geometric similarities between the Arakawa C-grid, used to obtain interpolated values of the wind field at grid scale and minVAR. In particular, we consider interpolation of the u and v horizontal components of wind velocity from grid to sub-grid scales. The last results are motivated by recent applications of the Weather Research and Forecasting (WRF) model applied in the coastal Houston region, where the recent TRacking Aerosol Convection Interactions ExpeRiment (TRACER) field campaign was organized. A unique and fully consistent mapping is obtained between particles moving along meteorological wind trajectories and the non-diffusive, non-dispersive representation of such trajectories on an Eulerian grid.

54 ENVIRONMENTAL SCIENCES↗

Communication: Modeling of concentration dependent water diffusivity in ionic solutions: Role of intermolecular charge transfer

The translational diffusivity of water in solutions of alkali halide salts depends on the identity of ions, exhibiting dramatically different behavior even in solutions of similar salts of NaCl and KCl. The water diffusion coefficient decreases as the salt concentration increases in NaCl. Yet, in KCl solution, it slightly increases and remains above bulk value as salt concentration increases. Previous classical molecular dynamics simulations have failed to describe this important behavior even when polarizable models were used. Here, we show that inclusion of dynamical charge transfer among water molecules produces results in a quantitative agreement with experiments. Our results indicate that the concentration-dependent diffusivity reflects the importance of many-body effects among the water molecules in aqueous ionic solutions. Comparison with quantum mechanical calculations shows that a heterogeneous and extended distribution of charges on water molecules around the ions due to ion-water and also water-water charge transfer plays a very important role in controlling water diffusivity. Explicit inclusion of the charge transfer allows us to model accurately the difference in the concentration-dependent water diffusivity between Na{sup +} and K{sup +} ions in simulations, and it is likely to impact modeling of a wide range of systems for medical and technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Erosion and re-deposition of lithium and boron coatings under high-flux plasma bombardment

Lithium and boron coatings are applied to the walls of many tokamaks to enhance performance and protect the underlying substrates. Li and B-coated high-Z substrates are planned for use in NSTX-U and are a candidate plasma-facing component (PFC) for DEMO. However, previous measurements of Li evaporation and thermal sputtering on low-flux devices indicate that the Li temperature permitted on such devices may be unacceptably low. Thus it is crucial to characterize gross and net Li erosion rates under high-flux plasma bombardment. Additionally, no quantitative measurements have been performed of the erosion rate of a boron-coated PFC during plasma bombardment. A realistic model for the compositional evolution of a Li layer under D bombardment was developed that incorporates adsorption, implantation, and diffusion. A model was developed for temperature-dependent mixed-material Li-D erosion that includes evaporation, physical sputtering, chemical sputtering, preferential sputtering, and thermal sputtering. The re-deposition fraction of a Li coating intersecting a linear plasma column was predicted using atomic physics information and by solving the Li continuity equation. These models were tested in the Magnum-PSI linear plasma device at ion fluxes of 10^23-10^24 m^-2 s^-1 and Li surface temperatures less than 800 degrees C. Li erosion was measured during bombardment with a neon plasma that will not chemically react with Li and the results agreed well with the erosion model. Next the ratio of the total D fluence to the areal density of the Li coating was varied to quantify differences in Li erosion under D plasma bombardment as a function of the D concentration. The ratio of D/Li atoms was calculated using the results of MD simulations and good agreement is observed between measurements and the predictions of the mixed-material erosion model. Li coatings are observed to disappear from graphite much faster than from TZM Mo, indicating that fast Li diffusion into the bulk graphite substrate occurred, as predicted. Li re-deposition fractions very close to unity are observed in Magnum-PSI, as predicted by modeling. Finally, predictions of Li coating lifetimes in the NSTX-U divertor are calculated. The gross erosion rate of boron coatings was also measured for the first time in a high-flux plasma device.

liquid metals↗

Electromagnetic Torque in Tokamaks with Toroidal Asymmetries

Lithium and boron coatings are applied to the walls of many tokamaks to enhance performance and protect the underlying substrates. Li and B-coated high-Z substrates are planned for use in NSTX-U and are a candidate plasma-facing component (PFC) for DEMO. However, previous measurements of Li evaporation and thermal sputtering on low-flux devices indicate that the Li temperature permitted on such devices may be unacceptably low. Thus it is crucial to characterize gross and net Li erosion rates under high-flux plasma bombardment. Additionally, no quantitative measurements have been performed of the erosion rate of a boron-coated PFC during plasma bombardment. A realistic model for the compositional evolution of a Li layer under D bombardment was developed that incorporates adsorption, implantation, and diffusion. A model was developed for temperature-dependent mixed-material Li-D erosion that includes evaporation, physical sputtering, chemical sputtering, preferential sputtering, and thermal sputtering. The re-deposition fraction of a Li coating intersecting a linear plasma column was predicted using atomic physics information and by solving the Li continuity equation. These models were tested in the Magnum-PSI linear plasma device at ion fluxes of 10^23-10^24 m^-2 s^-1 and Li surface temperatures less than 800 degrees C. Li erosion was measured during bombardment with a neon plasma that will not chemically react with Li and the results agreed well with the erosion model. Next the ratio of the total D fluence to the areal density of the Li coating was varied to quantify differences in Li erosion under D plasma bombardment as a function of the D concentration. The ratio of D/Li atoms was calculated using the results of MD simulations and good agreement is observed between measurements and the predictions of the mixed-material erosion model. Li coatings are observed to disappear from graphite much faster than from TZM Mo, indicating that fast Li diffusion into the bulk graphite substrate occurred, as predicted. Li re-deposition fractions very close to unity are observed in Magnum-PSI, as predicted by modeling. Finally, predictions of Li coating lifetimes in the NSTX-U divertor are calculated. The gross erosion rate of boron coatings was also measured for the first time in a high-flux plasma device.

liquid metals↗

Chemical insight from density functional modeling of molecular adsorption: Tracking the bonding and diffusion of anthracene derivatives on Cu(111) with molecular orbitals

We present a method of analyzing the results of density functional modeling of molecular adsorption in terms of an analogue of molecular orbitals. This approach permits intuitive chemical insight into the adsorption process. Applied to a set of anthracene derivates (anthracene, 9,10-anthraquinone, 9,10-dithioanthracene, and 9,10-diselenonanthracene), we follow the electronic states of the molecules that are involved in the bonding process and correlate them to both the molecular adsorption geometry and the species’ diffusive behavior. We additionally provide computational code to easily repeat this analysis on any system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffuse interface field approach to modeling arbitrarily-shaped particles at fluid-fluid interfaces

We present a novel mesoscale simulation approach to modeling the evolution of solid particles segregated at fluid-fluid interfaces. The approach involves a diffuse- interface field description of each fluid phase in addition to the set of solid particles. The unique strength of the model is its generality to include particles of arbitrary shapes and orientations, as well as the ability to incorporate electrostatic particle interactions and external forces via a previous work [Millett PC, Wang YU, Acta Mater 2009;57:3101]. In this work, we verify that the model produces the correct capillary forces and contact angles by comparing with a well-defined analytical solution. In addition, simulation results of rotations of various-shaped particles at fluid-fluid interfaces, external force- induced capillary attraction/repulsion between particles, and spinodal decomposition arrest due to colloidal particle jamming at the interfaces are presented.

36 MATERIALS SCIENCE↗

CHEMISTRY IN DIFFUSE CLOUDS WITH TRANSIENT MICROSTRUCTURE

Microstructure is observed on many lines of sight in the diffuse interstellar medium, mainly through variations in atomic line absorptions on timescales of a decade or less. This timescale implies that microstructure exists on a size scale comparable with that of the solar system; it is overpressured and transient. Both observations and theory confirm that a specific chemistry occurs in microstructure. We therefore explore a model of diffuse interstellar gas in which the chemistry in diffuse clouds is supplemented by chemistry in many transient and tiny perturbations. These perturbations are here assumed to be of unidentified origin, but it is assumed that ambipolar diffusion occurs within them. For plausible physical parameters, we find that this model can account for the range of molecular column densities observed in diffuse clouds, including species not usually accounted for by conventional models. Some molecular ions, predicted to be generated in the microstructure (including HS{sup +}, CH{sup +} {sub 2}, CH{sup +} {sub 3}, H{sub 2}O{sup +}, and H{sub 3}O{sup +}) but not yet observed in diffuse clouds, should be present at levels that may allow their detection.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling of ac dielectric barrier discharge

The qualitative electrodynamic field of the dielectric barrier discharge in air is studied by a three-component, drift-diffusion plasma model including the Poisson equation of plasmadynamics. The critical media interface boundary conditions independent of the detailed mechanisms of surface absorption, diffusion, recombination, and charge accumulation on electrode or dielectrics are developed from the theory of electromagnetics. The computational simulation duplicates the self-limiting feature of dielectric barrier discharge for preventing corona-to-spark transition, and the numerical results of the breakdown voltage are compared very well with data. According to the present modeling, the periodic electrodynamic force due to charge separation over the electrodes also exerts on alternative directions from the exposed to encapsulated electrodes over a complete ac cycle as experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modulation of Galactic Cosmic Rays in the Inner Heliosphere, Comparing with PAMELA Measurements

We develop a numerical model to study the time-dependent modulation of galactic cosmic rays in the inner heliosphere. In the model, a time-delayed modified Parker heliospheric magnetic field (HMF) and a new diffusion coefficient model, NLGCE-F, from Qin and Zhang, are adopted. In addition, the latitudinal dependence of magnetic turbulence magnitude is assumed to be ∼(1+sin{sup 2}θ)/2 from the observations of Ulysses, and the radial dependence is assumed to be ∼r{sup S}, where we choose an expression of S as a function of the heliospheric current sheet tilt angle. We show that the analytical expression used to describe the spatial variation of HMF turbulence magnitude agrees well with the Ulysses, Voyager 1, and Voyager 2 observations. By numerically calculating the modulation code, we get the proton energy spectra as a function of time during the recent solar minimum, it is shown that the modulation results are consistent with the Payload for Antimatter-Matter Exploration and Light-nuclei Astrophysics measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Atomistic models of In and Ga diffusion in Cu(In,Ga)Se 2

To improve the performance of Cu(In,Ga)Se 2 thin-film photovoltaic devices, a robust understanding of the dominant diffusion pathways of the alloy species In and Ga is needed. Here, the most probable defect complexes and mechanisms for In and Ga diffusion are identified with the aid of density functional theory. The binding energies and migration barriers for these complexes are calculated in bulk CuInSe 2 and CuGaSe 2 . Analytic models and kinetic lattice Monte Carlo simulations are employed to predict the diffusivity of In and Ga under variations in composition and temperature. Here, we find that a model based on coulombic interactions between group III antisites and vacancies on the Cu-sublattice produces results that match well with experiment.

14 SOLAR ENERGY↗

Secondary Waste Form Development and Data Package for Hanford's Integrated Disposal Facility Performance Assessment - 16479

The Hanford Low-Activity Waste (LAW) Vitrification facility is planned to immobilize Hanford tank waste for on-site, near-surface disposal at Hanford's Integrated Disposal Facility (IDF). During this process, liquid and solid secondary wastes will be generated which are also slated for disposal at the IDF. In order to receive authorization to dispose of the waste in the IDF, a Performance Assessment (PA) must be completed in accordance with DOE Order 435.1, Radioactive Waste Management, and its accompanying Manual. The PA must include calculations of potential doses to a member of the public for a 1,000-year period to provide a reasonable expectation that performance objectives will not be exceeded and that the waste will be managed in a manner that is protective of worker and public health and safety, and the environment. Liquid and solid secondary wastes are planned to be immobilized within cementitious waste forms similar to those used elsewhere in the United States and around the world for permanent disposal of low-level radioactive waste (LLW). Data packages and supporting documents are being developed to provide the technical underpinning for the analyses of contaminant releases to the environment from these waste forms for the IDF PA. Traditionally, releases from cementitious waste forms have utilized a diffusion-limited release model using contaminant-specific diffusivities measured in standard leach tests as inputs. More mechanistic modeling techniques are under development to increase the rigor of the PA analyses. In addition, recent testing has shown diffusivities of key contaminants can be reduced by several orders-of-magnitude through optimized formulation of the waste form and use of additives to bind specific contaminants. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reactive nanolaminate pulsed-laser ignition mechanism: Modeling and experimental evidence of diffusion limited reactions

We irradiated Al/Pt nanolaminates with a bilayer thickness (tb, width of an Al/Pt pair-layer) of 164 nm with single laser pulses with durations of 10 ms and 0.5 ms at 189 W/cm 2 and 1189 W/cm 2 , respectively. The time to ignition was measured for each pulse, and shorter ignition times were observed for the higher power/shorter pulse width. While the shorter pulse shows uniform brightness, videographic images of the irradiated area shortly after ignition show a non-uniform radial brightness for the longer pulse. A diffusion-limited single step reaction mechanism was implemented in a finite element package to model the progress from reactants to products at both pulse widths. Finally, the model captures well both the observed ignition delay and qualitative observations regarding the non-uniform radial temperature.

36 MATERIALS SCIENCE↗

RRL OBSERVATIONS USING ORT AT 328 MHz AND WSRT AT 1.4 GHz FROM ELDWIM

Radio recombination line (RRL or RL for short) observations from 10 Galactic positions using the Ooty Radio Telescope (ORT) at 328 MHz and the Westerbork Synthesis Radio Telescope (WSRT) at 1.4 GHz have been presented. ORT observations were made using a recently augmented New Digital Backend (NDB). NDB offered a bandwidth of 1 MHz that was used to observe H271{alpha} RL. The eight intermediate-frequency bands offered by WSRT in the incoherent addition mode were used to detect the seven H/Hen{alpha} RLs with n = 165-171 and the H208{beta} RL. RL observations common to WSRT and ORT have been put together to model the diffuse low-density ionized gas (extended low density warm ionized medium, ELDWIM). This modeling constrains the electron number density in ELDWIM to 1.0 cm{sup -3} < n{sub e} < 10.0 cm{sup -3} for a temperature range of 10{sup 3}-10{sup 4} K for these 10 positions. An effective stellar temperature of the H II region picture for three positions showing He line detection has been presented using spherical cloud modeling. The lower limits on the stellar temperatures are >33,000 K for the obtained ratios of N{sub He+}/N{sub H+} toward these directions.

79 ASTRONOMY AND ASTROPHYSICS↗

Calculations of hydrogen diffusivity in Zr-based alloys: Influence of alloying elements and effect of stress

This report summarizes the progress on modeling hydrogen diffusivity in Zr-based alloys. The presence of hydrogen (H) can detrimentally affect the mechanical properties of many metals and alloys. To mitigate these detrimental effects requires fundamental understanding of the thermodynamics and kinetics governing H pickup and hydride formation. In this work, we focus on H diffusion in Zr-based alloys by studying the effects of alloying elements and stress, factors that have been shown to strongly affect H pickup and hydride formation in nuclear fuel claddings. A recently developed accelerated kinetic Monte Carlo method is used for the study. It is found that for the alloys considered here, H diffusivity depends weakly on composition, with negligible effect at high temperatures in the range of 600-1200 K. Therefore, the small variation in compositions of these alloys is likely not a major cause of the very different H pickup rates. In contrast, stress strongly affects H diffusivity. This effect needs to be considered for studying hydride formation and delayed hydride cracking.

36 MATERIALS SCIENCE↗

Use of a controlled experiment and computational models to measure the impact of sequential peer exposures on decision making

It is widely believed that one’s peers influence product adoption behaviors. This relationship has been linked to the number of signals a decision-maker receives in a social network. But it is unclear if these same principles hold when the “pattern” by which it receives these signals vary and when peer influence is directed towards choices which are not optimal. To investigate that, we manipulate social signal exposure in an online controlled experiment using a game with human participants. Each participant in the game decides among choices with differing utilities. We observe the following: (1) even in the presence of monetary risks and previously acquired knowledge of the choices, decision-makers tend to deviate from the obvious optimal decision when their peers make a similar decision which we call the influence decision, (2) when the quantity of social signals vary over time, the forwarding probability of the influence decision and therefore being responsive to social influence does not necessarily correlate proportionally to the absolute quantity of signals. To better understand how these rules of peer influence could be used in modeling applications of real world diffusion and in networked environments, we use our behavioral findings to simulate spreading dynamics in real world case studies. We specifically try to see how cumulative influence plays out in the presence of user uncertainty and measure its outcome on rumor diffusion, which we model as an example of sub-optimal choice diffusion. Together, our simulation results indicate that sequential peer effects from the influence decision overcomes individual uncertainty to guide faster rumor diffusion over time. However, when the rate of diffusion is slow in the beginning, user uncertainty can have a substantial role compared to peer influence in deciding the adoption trajectory of a piece of questionable information.

97 MATHEMATICS AND COMPUTING↗