Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Maximum CO 2 diffusion inside leaves is limited by the scaling of cell size and genome size

Maintaining high rates of photosynthesis in leaves requires efficient movement of CO 2 from the atmosphere to the mesophyll cells inside the leaf where CO 2 is converted into sugar. CO 2 diffusion inside the leaf depends directly on the structure of the mesophyll cells and their surrounding airspace, which have been difficult to characterize because of their inherently three-dimensional organization. Yet faster CO 2 diffusion inside the leaf was probably critical in elevating rates of photosynthesis that occurred among angiosperm lineages. Here we characterize the three-dimensional surface area of the leaf mesophyll across vascular plants. We show that genome size determines the sizes and packing densities of cells in all leaf tissues and that smaller cells enable more mesophyll surface area to be packed into the leaf volume, facilitating higher CO 2 diffusion. Measurements and modelling revealed that the spongy mesophyll layer better facilitates gaseous phase diffusion while the palisade mesophyll layer better facilitates liquid-phase diffusion. Our results demonstrate that genome downsizing among the angiosperms was critical to restructuring the entire pathway of CO 2 diffusion into and through the leaf, maintaining high rates of CO 2 supply to the leaf mesophyll despite declining atmospheric CO 2 levels during the Cretaceous.

59 BASIC BIOLOGICAL SCIENCES↗

Diffusion of Mn interstitials in (Ga,Mn)As epitaxial layers

The magnetic properties of thin (Ga,Mn)As layers improve during annealing by out-diffusion of interstitial Mn ions to a free surface. Out-diffused Mn atoms participate in the growth of a Mn-rich surface layer and a saturation of this layer causes an inhibition of the out-diffusion. We combine high-resolution x-ray diffraction with x-ray absorption spectroscopy and a numerical solution of the diffusion problem for the study of the out-diffusion of Mn interstitials during a sequence of annealing steps. Our data demonstrate that the out-diffusion of the interstitials is substantially affected by the internal electric field caused by an inhomogeneous distribution of charges in the (Ga,Mn)As layer.

36 MATERIALS SCIENCE↗

Explainable machine learning for hydrogen diffusion in metals and random binary alloys

Hydrogen diffusion in metals and alloys plays an important role in the discovery of new materials for fuel cell and energy storage technology. While analytic models use hand-selected features that have clear physical ties to hydrogen diffusion, they often lack accuracy when making quantitative predictions. Machine learning models are capable of making accurate predictions, but their inner workings are obscured, rendering it unclear which physical features are truly important. To develop interpretable machine learning models to predict the activation energies of hydrogen diffusion in metals and random binary alloys, we create a database for physical and chemical properties of the species and use it to fit six machine learning models. Our models achieve root-mean-squared errors between 98–119 meV on the testing data and accurately predict that elemental Ru has a large activation energy, while elemental Cr and Fe have small activation energies. By analyzing the feature importances of these fitted models, we identify relevant physical properties for predicting hydrogen diffusivity. While metrics for measuring the individual feature importances for machine learning models exist, correlations between the features lead to disagreement between models and limit the conclusions that can be drawn. Instead grouped feature importance, formed by combining the features via their correlations, agree across the six models and reveal that the two groups containing the packing factor and electronic specific heat are particularly significant for predicting hydrogen diffusion in metals and random binary alloys. In conclusion, this framework allows us to interpret machine learning models and enables rapid screening of new materials with the desired rates of hydrogen diffusion.

36 MATERIALS SCIENCE↗

Intermolecular correlations are necessary to explain diffuse scattering from protein crystals

Conformational changes drive protein function, including catalysis, allostery, and signaling. X-ray diffuse scattering from protein crystals has frequently been cited as a probe of these correlated motions, with significant potential to advance our understanding of biological dynamics. However, recent work challenged this prevailing view, suggesting instead that diffuse scattering primarily originates from rigid body motions and could therefore be applied to improve structure determination. To investigate the nature of the disorder giving rise to diffuse scattering, and thus the potential applications of this signal, a diverse repertoire of disorder models was assessed for its ability to reproduce the diffuse signal reconstructed from three protein crystals. This comparison revealed that multiple models of intramolecular conformational dynamics, including ensemble models inferred from the Bragg data, could not explain the signal. Models of rigid body or short-range liquid-like motions, in which dynamics are confined to the biological unit, showed modest agreement with the diffuse maps, but were unable to reproduce experimental features indicative of long-range correlations. Extending a model of liquid-like motions to include disorder across neighboring proteins in the crystal significantly improved agreement with all three systems and highlighted the contribution of intermolecular correlations to the observed signal. These findings anticipate a need to account for intermolecular disorder in order to advance the interpretation of diffuse scattering to either extract biological motions or aid structural inference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical information transfer through random unknown diffusers using electronic encoding and diffractive decoding

Free-space optical information transfer through diffusive media is critical in many applications, such as biomedical devices and optical communication, but remains challenging due to random, unknown perturbations in the optical path. We demonstrate an optical diffractive decoder with electronic encoding to accurately transfer the optical information of interest, corresponding to, e.g., any arbitrary input object or message, through unknown random phase diffusers along the optical path. This hybrid electronic-optical model, trained using supervised learning, comprises a convolutional neural network-based electronic encoder and successive passive diffractive layers that are jointly optimized. After their joint training using deep learning, our hybrid model can transfer optical information through unknown phase diffusers, demonstrating generalization to new random diffusers never seen before. The resulting electronic-encoder and optical-decoder model was experimentally validated using a 3D-printed diffractive network that axially spans <70λ, where λ = 0.75 mm is the illumination wavelength in the terahertz spectrum, carrying the desired optical information through random unknown diffusers. The presented framework can be physically scaled to operate at different parts of the electromagnetic spectrum, without retraining its components, and would offer low-power and compact solutions for optical information transfer in free space through unknown random diffusive media.

36 MATERIALS SCIENCE↗

Silver diffusion over silicon surfaces with adsorbed tin atoms

Silver diffusion over the (111), (100), and (110) surfaces of silicon with preliminarily adsorbed tin atoms is studied by Auger electron spectroscopy and low-energy electron diffraction. Diffusion is observed only on the surface of Si(111)-2√3 × 2√3-Sn. The diffusion mechanism is established. It is found that the diffusion coefficient depends on the concentration of diffusing atoms. The diffusion coefficient decreases with increasing silver concentration, while the activation energy and the preexponential factor increase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusion dynamics of small molecules from mesoporous silicon films by real-time optical interferometry

Time-dependent laser reflectometry measurements are presented as a means to rigorously characterize analyte diffusion dynamics of small molecules from mesoporous silicon (PSi) films for drug delivery and membrane physics applications. Calculations based on inclusion of a spatially and temporally dependent solute concentration profile in a one-dimensional Fickian diffusion flow model are performed to determine the diffusion coefficients for the selected prototypical polar species, sucrose (340 Da), exiting from PSi films. The diffusion properties of the molecules depend on both PSi pore size and film thickness. For films with average pore diameters between 10-30 nm and film thicknesses between 300-900 nm, the sucrose diffusion coefficient can be tuned between approximately 100 and 550 {mu}m{sup 2}/s. Extensions of the real-time measurement and modeling approach for determining the diffusivity of small molecules that strongly interact with and corrode the internal surfaces of PSi films are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Experimental Study of Diffusivity of Technetium-99 in Hanford Vadose Zone Sediments

One of the methods being considered at the Hanford site in Washington for safely disposing of low-level radioactive wastes (LLW) is to encase the waste in concrete and entomb the packages in the Hanford vadose zone sediments. The current plan for waste isolation consists of stacking low-level waste packages on a trench floor, surrounding the stacks with reinforced steel, and encasing these packages with concrete. Any failure of the concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages. The mobilized radionuclides may escape from the encased concrete by mass flow and/or diffusion and move into the surrounding subsurface sediments. It is therefore necessary to conduct an assessment of the performance of the concrete encasement structure and the surrounding soil’s ability to retard radionuclide migration. The retardation factors for radionuclides contained in the waste packages can be determined from measurements of diffusion coefficients for these contaminants through concrete and fill material. Because of their anionic nature in aqueous solutions, the radionuclides, 99Tc and 129I were identified as long-term dose contributors in LLW. The leachability and/or diffusion of these radionuclide species must be measured in order to assess the long-term performance of waste grouts when contacted with vadose-zone porewater or groundwater. To measure the diffusivity, a set of experiments were conducted using 99Tc-spiked concrete (with 0 and 4% metallic iron additions) in contact with unsaturated soil half-cells that reflected the typical moisture contents of Hanford vadose zone sediments. The 99Tc diffusion profiles in the soil half cells were measured after a time lapse of ~1.9 yr. Using the concentration profiles, the 99Tc diffusivity coefficients were calculated based on Fick’s Second Law.

techetium, diffusion, vadose zone sediments↗

Isotope Tracer Studies of Diffusion in Sillicates and of Geological Transport Processes Using Actinide Elements

The objectives were directed toward understanding the transport of chemical species in nature, with particular emphasis on aqueous transport in solution, in colloids, and on particles. Major improvements in measuring ultra-low concentrations of rare elements were achieved. We focused on two areas of studies: (1) Field, laboratory, and theoretical studies of the transport and deposition of U, Th isotopes and their daughter products in natural systems; and (2) Study of calcium isotope fractionation effects in marine carbonates and in carbonates precipitated in the laboratory, under controlled temperature, pH, and rates of precipitation. A major study of isotopic fractionation of Ca during calcite growth from solution has been completed and published. It was found that the isotopic shifts widely reported in the literature and attributed to biological processes are in fact due to a small equilibrium fractionation factor that is suppressed by supersaturation of the solution. These effects were demonstrated in the laboratory and with consideration of the solution conditions in natural systems, where [Ca{sup 2+}] >> [CO{sub 3}{sup 2-}] + [HCO{sub 3}{sup -}]. The controlling rate is not the diffusion of Ca, as was earlier proposed, but rather the rate of supply of [CO{sub 3}{sup 2-}] ions to the interface. This now opens the issues of isotopic fractionation of many elements to a more physical-chemical approach. The isotopic composition of Ca {Delta}({sup 44}Ca/{sup 40}Ca) in calcite crystals has been determined relative to that in the parent solutions by TIMS using a double spike. Solutions were exposed to an atmosphere of NH{sub 3} and CO{sub 2}, provided by the decomposition of (NH4)2CO3. Alkalinity, pH, and concentrations of CO{sub 3}{sup 2-}, HCO{sub 3}{sup -}, and CO{sub 2} in solution were determined. The procedures permitted us to determine {Delta}({sup 44}Ca/{sup 40}Ca) over a range of pH conditions, with the associated ranges of alkalinity. Two solutions with greatly different Ca concentrations were used, but, in all cases, the condition [Ca] >> [CO{sub 3}{sup 2-}] was met. A wide range in {Delta}({sup 44}Ca/{sup 40}Ca) was found for the calcite crystals, extending from 0.04 {+-} 0.13 to -1.34 {+-} 0.15 {per_thousand}, generally anticorrelating with the amount of Ca removed from the solution. The results show that {Delta}({sup 44}Ca/{sup 40}Ca) is a linear function of the saturation state of the solution with respect to calcite ({Omega}). The two parameters are very well correlated over a wide range in {Omega} for each solution with a given [Ca]. Solutions, which were vigorously stirred, showed a much smaller range in {Delta}({sup 44}Ca/{sup 40}Ca) and gave values of -0.42 {+-} 0.14 {per_thousand}, with the largest effect at low {Omega}. It is concluded that the diffusive flow of CO{sub 3}{sup 2-} into the immediate neighborhood of the crystal-solution interface is the rate-controlling mechanism and that diffusive transport of Ca{sup 2+} is not a significant factor. The data are simply explained by the assumptions that: (a) the immediate interface of the crystal and the solution is at equilibrium with {Delta}({sup 44}Ca/{sup 40}Ca) {approx} -1.5 {+-} 0.25 {per_thousand}, and (b) diffusive inflow of CO{sub 3}{sup 2-} causes supersaturation, thus precipitating Ca from the regions, exterior to the narrow zone of equilibrium. We consider this model to be a plausible explanation of the available data reported in the literature. The well-resolved but small and regular isotope fractionation shifts in Ca are thus not related to the diffusion of very large hydrated Ca complexes, but rather due to the ready availability of Ca in the general neighborhood of the crystal solution interface. The largest isotopic shift which occurs is a small equilibrium effect which is then subdued by supersaturation precipitation for solutions where [Ca{sup 2+}] >> [CO{sub 3}{sup 2-}] + [HCO{sub 3}{sup -}]. It is shown that there is a clear temperature dependence of the net isotopic shifts, which is simply due to changes in {Omega}, due to the equilibrium 'constants' dependence on temperature, which changes the degree of saturation and hence the amount of isotopically unequilibrated Ca precipitated. The effects that are found in natural samples, therefore, will be dependent on the degree of diffusive inflow of carbonate species at or around the crystal-liquid interface in the particular precipitating system, thus limiting the equilibrium effect. The second study treats the problem of Sr isotopic changes in aquifer waters in carbonate terrains. It was found that while dolomite dissolution, calcite precipitation, and clay exchange may govern the bulk chemistry of such waters, the major source of Sr is from the dissolution of the minor phase anhydrite.

54 ENVIRONMENTAL SCIENCES↗

On The Anomalous Fast Ion Energy Diffusion in Toroidal Plasmas Due to Cavity Modes

An enormous wave-particle diffusion coefficient along paths suitable for alpha channeling had been deduced in mode converted ion Bernstein wave experiments on Tokamak Fusion Test Reactor (TFTR) the only plausible explanation advanced for such a large diffusion coefficient was the excitation of internal cavity modes which induce particle diffusion along identical diffusion paths, but at much higher rates. Although such a mode was conjectured, it was never observed. However, recent detailed observations of high frequency compressional Alfven eigenmodes (CAEs) on the National Spherical torus Experiment (NSTX) indirectly support the existence of the related conjectured modes on TFTR. The eigenmodes responsible for the high frequency magnetic activity can be identified as CAEs through the polarization of the observed magnetic field oscillations in NSTX and through a comparison with the theoretically derived freuency dispersion relation. Here, we show how these recent observations of high frequency CAEs lend support to this explanation of the long-standing puzzle of anomalous fast ion energy diffusion on TFTR. The support of the conjecure that these internal modes could have caused the remarkable ion energy diffusion on TFTR carries significant and favorable implications for the possibilities in achieving the alpha channeling effect with small injected power in a tokamak reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization and modeling of thermal diffusion and aggregation in nanofluids.

Fluids with higher thermal conductivities are sought for fluidic cooling systems in applications including microprocessors and high-power lasers. By adding high thermal conductivity nanoscale metal and metal oxide particles to a fluid the thermal conductivity of the fluid is enhanced. While particle aggregates play a central role in recent models for the thermal conductivity of nanofluids, the effect of particle diffusion in a temperature field on the aggregation and transport has yet to be studied in depth. The present work separates the effects of particle aggregation and diffusion using parallel plate experiments, infrared microscopy, light scattering, Monte Carlo simulations, and rate equations for particle and heat transport in a well dispersed nanofluid. Experimental data show non-uniform temporal increases in thermal conductivity above effective medium theory and can be well described through simulation of the combination of particle aggregation and diffusion. The simulation shows large concentration distributions due to thermal diffusion causing variations in aggregation, thermal conductivity and viscosity. Static light scattering shows aggregates form more quickly at higher concentrations and temperatures, which explains the increased enhancement with temperature reported by other research groups. The permanent aggregates in the nanofluid are found to have a fractal dimension of 2.4 and the aggregate formations that grow over time are found to have a fractal dimension of 1.8, which is consistent with diffusion limited aggregation. Calculations show as aggregates grow the viscosity increases at a faster rate than thermal conductivity making the highly aggregated nanofluids unfavorable, especially at the low fractal dimension of 1.8. An optimum nanoparticle diameter for these particular fluid properties is calculated to be 130 nm to optimize the fluid stability by reducing settling, thermal diffusion and aggregation.

42 ENGINEERING↗

Perpendicular Diffusion Coefficient of Comic Rays: The Presence of Weak Adiabatic Focusing

The influence of adiabatic focusing on particle diffusion is an important topic in astrophysics and plasma physics. In the past, several authors have explored the influence of along-field adiabatic focusing on the parallel diffusion of charged energetic particles. In this paper, using the unified nonlinear transport theory developed by Shalchi and the method of He and Schlickeiser, we derive a new nonlinear perpendicular diffusion coefficient for a non-uniform background magnetic field. This formula demonstrates that the particle perpendicular diffusion coefficient is modified by along-field adiabatic focusing. For isotropic pitch-angle scattering and the weak adiabatic focusing limit, the derived perpendicular diffusion coefficient is independent of the sign of adiabatic focusing characteristic length. For the two-component model, we simplify the perpendicular diffusion coefficient up to the second order of the power series of the adiabatic focusing characteristic quantity. We find that the first-order modifying factor is equal to zero and that the sign of the second order is determined by the energy of the particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-diffusive, non-local transport in fluids and plasmas

A review on non-diffusive transport in fluids and plasmas is presented. In the fluid context, non-diffusive chaotic transport by Rossby waves in zonal flows is studied following a Lagrangian approach. In the plasma physics context the problem of interest is test particle transport in pressure-gradient-driven plasma turbulence. In both systems the probability density function (PDF) of particle displacements is strongly non-Gaussian and the statistical moments exhibit super-diffusive anomalous scaling. Fractional diffusion models are proposed and tested in the quantitative description of the non-diffusive Lagrangian statistics of the fluid and plasma problems. Also, fractional diffusion operators are used to construct non-local transport models exhibiting up-hill transport, multivalued flux-gradient relations, fast pulse propagation phenomena, and tunneling of perturbations across transport barriers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diffusion NMR methods applied to xenon gas for materials study

We report initial NMR studies of (i) xenon gas diffusion in model heterogeneous porous media and (ii) continuous flow laser-polarized xenon gas. Both areas utilize the pulsed gradient spin-echo (PGSE) techniques in the gas phase, with the aim of obtaining more sophisticated information than just translational self-diffusion coefficients--a brief overview of this area is provided in the Introduction. The heterogeneous or multiple-length scale model porous media consisted of random packs of mixed glass beads of two different sizes. We focus on observing the approach of the time-dependent gas diffusion coefficient, D(t) (an indicator of mean squared displacement), to the long-time asymptote, with the aim of understanding the long-length scale structural information that may be derived from a heterogeneous porous system. We find that D(t) of imbibed xenon gas at short diffusion times is similar for the mixed bead pack and a pack of the smaller sized beads alone, hence reflecting the pore surface area to volume ratio of the smaller bead sample. The approach of D(t) to the long-time limit follows that of a pack of the larger sized beads alone, although the limiting D(t) for the mixed bead pack is lower, reflecting the lower porosity of the sample compared to that of a pack of mono-sized glass beads. The Pade approximation is used to interpolate D(t) data between the short- and long-time limits. Initial studies of continuous flow laser-polarized xenon gas demonstrate velocity-sensitive imaging of much higher flows than can generally be obtained with liquids (20-200 mm s-1). Gas velocity imaging is, however, found to be limited to a resolution of about 1 mm s-1 owing to the high diffusivity of gases compared with liquids. We also present the first gas-phase NMR scattering, or diffusive-diffraction, data, namely flow-enhanced structural features in the echo attenuation data from laser-polarized xenon flowing through a 2 mm glass bead pack. c2002 John Wiley & Sons, Ltd.

NASA Discipline Life Sciences Technologies↗

X-ray Diffuse Scattering near Bragg Relections for the Study of Clustered Defects in Crystalline Materials

The fundamental aspects of diffuse scattering from lattice defects within the coherent wave theory are reviewed, and the use of Huang and asymptotic diffuse scattering for the determination of the size, type, and internal structure of clustered defects is discussed. The scattering amplitude for diffuse scattering from lattice defects is presented within the single defect approximation, and the physical interpretation of the asymptotic diffuse scattering from dislocation loops and precipitates is discussed in terms of local Bragg scattering. The importance of using detailed and accurate displacement fields for calculating diffuse scattering cross sections for dislocation loops and coherent precipitates is emphasized, and examples of the measurement of size distributions for vacancy and interstitial loops and for coherent precipitates in Cu are revisited. In addition, the use of submicrometer-diameter X-ray microbeams to perform depth-resolved diffuse scattering measurements of vacancy and interstitial loop distributions in 10 MeV self-ion-implanted silicon single crystals is discussed.

36 MATERIALS SCIENCE↗

Comparison of neutron diffusion and Monte Carlo models for a fission wave

Many groups have used neutron diffusion simulations to study fission wave phenomena in natural or depleted uranium. However, few studies of fission wave phenomena have been published that use Monte Carlo simulations to confirm the results of diffusion models for this type of system. In the present work we show the results of a criticality and burnup simulation of a traveling wave reactor using MCNPX 2.7.0. The characteristics of the fission wave in this simulation are compared with those from a simple one-dimensional, one-group neutron diffusion model. The diffusion simulations produce a wave speed of 5.9 cm/yr versus 5.3 cm/yr for the Monte Carlo simulations. The axial flux profile in the Monte Carlo simulation is similar in shape to the diffusion results, but with different peak values, and the two profiles have an R2 value of 0.93. The {sup 238}U, {sup 239}Np and {sup 239}Pu burnup profiles from the diffusion simulation show good agreement with the Monte Carlo simulations, R values of 0.98, 0.93 and 0.97 respectively are observed. (authors)

97 MATHEMATICS AND COMPUTING↗

Diffusion Synthetic Acceleration for High Order S{sub N} Transport on Meshes with Curved Surfaces

Thermal radiation transport is integral to multiphysics applications such as inertial confinement fusion and astrophysics. Materials in these problems can be exceptionally optically thick and diffusive. A transport solver must be capable of accurate and efficient solutions to such problems. Previously, Woods et al. established a proof-of-concept for high order (HO) discontinuous Galerkin finite element (DGFEM) transport on meshes with curved surfaces. They numerically demonstrated the spatial convergence is order p + 1. Remarkably, these convergence rates are relatively invariant to the amount of curvature of the spatial mesh. We present here an extension of this work that demonstrates a rapidly-convergent iterative solver for the FEM transport equations on meshes with curved sides. We use the modified interior penalty (MIP) diffusion synthetic acceleration (DSA) established by Wang and Ragusa. The partially consistent MIP equations stem from the symmetric interior penalty (IP) derivation of the diffusion equation. The IP method is not stable for optically thick cells so it was combined with the diffusion conforming form (DCF), a discretized diffusion equation derived from the discretized S N equations that is not stable for intermediate optical thicknesses. The MIP equations adapt a 'switch' to the IP method in optically thinner regions and the DCF method in optically thicker regions. The literature does not reveal any Fourier analyses performed for iterative transport on meshes with curved surfaces. Wang and Ragusa performed a Fourier analysis for orthogonal meshes and our results appear to be as expected. Previous literature has reported on some of the sensitivities that affect the spectral radius of DSA schemes: polynomial order, and scattering ratios. Presently, we focus on the sensitivity of the spectral radius to polynomial order, scattering ratio, the constant C, and mesh curvature for varying cell thicknesses. We also numerically study the behavior of the spectral radius to verify our DSA implementation. A sequence of problems is designed to exercise the acceleration. As the problems become more optically thick and diffusive, the accelerated solution continues to converge toward the analytic solution. We employ the Modular Finite Element Methods (MFEM) package, developed at Lawrence Livermore National Laboratory, to generate the linear algebraic system of equations for each angle in the discrete ordinates quadrature set, and use UMFPack to solve this system of equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nd3+ ion diffusion during sintering of Nd:YAG transparent ceramics

Using an electron microprobe, we measured and characterized the Nd{sup 3+} ion diffusion across a boundary between Nd doped and undoped ceramic yttrium aluminum garnet (YAG) for different temperature ramps and hold times and temperatures. The results show significant Nd ion diffusion on the order of micrometers to tens of micrometers depending on the time and temperature of sintering. The data fit well a model including bulk diffusion, grain boundary diffusion and grain growth. Grain boundary diffusion dominates and grain growth limits grain boundary diffusion by reducing the total cross sectional area of grain boundaries.

42 ENGINEERING↗