Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Measurement of Small Molecular Dopant F4TCNQ and C 60 F 36 Diffusion in Organic Bilayer Architectures

The diffusion of molecules through and between organic layers is a serious stability concern in organic electronic devices. In this paper, the temperature-dependent diffusion of molecular dopants through small molecule hole transport layers is observed. Specifically we investigate bilayer stacks of small molecules used for hole transport (MeO-TPD) and p-type dopants (F4TCNQ and C 60 F 36 ) used in hole injection layers for organic light emitting diodes and hole collection electrodes for organic photovoltaics. With the use of absorbance spectroscopy, photoluminescence spectroscopy, neutron reflectometry, and near-edge X-ray absorption fine structure spectroscopy, we are able to obtain a comprehensive picture of the diffusion of fluorinated small molecules through MeO-TPD layers. F4TCNQ spontaneously diffuses into the MeO-TPD material even at room temperature, while C 60 F 36 , a much bulkier molecule, is shown to have a substantially higher morphological stability. Finally, this study highlights that the differences in size/geometry and thermal properties of small molecular dopants can have a significant impact on their diffusion in organic device architectures.

36 MATERIALS SCIENCE↗

Influence of Rigidity–Hydration Coupling on Size-Dependent Diffusion in Hydrated Polymer Membranes

Selective ion transport in polymer membranes depends critically on how penetrant motion couples to polymer dynamics and hydration. Yet, the mechanistic interplay between polymer rigidity, water content, and penetrant size remains poorly understood, especially in the regime where the penetrant diameter, polymer Kuhn length, and correlation length are comparable. Here, we employ coarse-grained molecular dynamics simulations to systematically investigate penetrant diffusion in hydrated polymer networks across a broad range of water volume fractions, chain rigidities, and penetrant sizes. The results reveal a transition from a decoupled regime, where small penetrants diffuse nearly independently of polymer relaxation, to a coupled regime in which large penetrants require cooperative polymer motion for transport. Increasing polymer rigidity amplifies the sensitivity of diffusivity to hydration, particularly at low water content, leading to pronounced deviations from Stokes−Einstein scaling. Comparison with scaling theories and free-volume models shows that classical nanoparticle-based frameworks fail to capture this intermediate regime. To address this gap, we extend the Yasuda model to incorporate polymer rigidity through a single parameter that quantifies the dynamic contribution of chain stiffness to free-volume fluctuations. The resulting model collapses diffusivity data across all sizes, water contents, and rigidities, providing a unified description of penetrant transport in hydrated polymer matrices. Furthermore, these findings establish polymer rigidity as a key, tunable determinant of diffusion and offer a framework for interpreting size-dependent transport in ion-selective membranes.

diffusion↗

Surface Self-Diffusion Induced Sintering of Nanoparticles

Despite the critical role of sintering phenomena in constraining the long-term durability of nanosized particles, a clear understanding of nanoparticle sintering has remained elusive due to the challenges in atomically tracking the neck initiation and discerning different mechanisms. Through the integration of in situ transmission electron microscopy and atomistic modeling, this study uncovers the atomic dynamics governing the neck initiation of Pt–Fe nanoparticles via a surface self-diffusion process, allowing for coalescence without significant particle movement. Real-time imaging reveals that thermally activated surface morphology changes in individual nanoparticles induce significant surface self-diffusion. Further, the kinetic entrapment of self-diffusing atoms in the gaps between closely spaced nanoparticles leads to the nucleation and growth of atomic layers for neck formation. This surface self-diffusion-driven sintering process is activated at a relatively lower temperature compared to the classic Ostwald ripening and particle migration and coalescence processes. The fundamental insights have practical implications for manipulating the morphology, size distribution, and stability of nanostructures by leveraging surface self-diffusion processes.

36 MATERIALS SCIENCE↗

Charge Carrier and Spin Diffusion in a Polycrystalline and Single Crystal Lead Halide Perovskite Semiconductor

The directed movement of spin-bearing excitations in semiconductors can enable many potential schemes for spintronic applications. Understanding the mechanism of spin motion, as opposed to charge carrier or exciton motion, may require specialized techniques and sample conditions. Here we employ the noncontact and time-resolved technique of light-induced transient grating spectroscopy (LITG) to measure both carrier and spin motion in a perovskite semiconductor with varying crystallinity. The carrier motion aligns with expectations from past studies undertaken at low fluence, revealing an ambipolar diffusion coefficient on the order of 1 cm 2 /sec and diffusion length of roughly 1.5 μm for single crystals that is strongly attenuated as crystallite size decreases. The spin diffusion is measured with cross-polarized excitation beams and uncovers an intensity-dependent coefficient rising above 100 cm 2 /sec. The fast room-temperature spin relaxation limits the spin diffusion length, but the remarkable speedup of spin over carrier diffusion suggests a mechanism involving a combination of exchange-mediated and doping effects that enhance spin transport.

14 SOLAR ENERGY↗

Macromolecule Sorption and Diffusion in HEMA/MAA Hydrogels

Transient solute absorption and desorption concentration profiles were measured in a 70 wt % hydroxyethyl methacrylate (HEMA)/30 wt % methacrylic acid (MAA) anionic hydrogel using two-photon confocal microscopy. Dilute aqueous solutes included fluorescently labeled dextrans with molecular masses of 4, 10, and 20 kDa, and fluorescently labeled cationic avidin protein. Cross-linking densities with ethylene glycol dimethacrylate (EGDMA) varied from 0 to 1 wt % with polymer volume fractions increasing from 0.15 to 0.25. Average gel mesh sizes, determined from zero-frequency oscillatory shear storage moduli, ranged from about 3.6 to 8.4 nm over the cross-link ratios studied. All solutes exhibit Stokes-Einstein hydrodynamic radii obtained from measured free diffusion coefficients, D o , comparable to or larger than the average gel mesh size. In spite of considerable size exclusion, the studied solutes penetrate the gels indicating a range of mesh sizes available for transport. Transient uptake and release concentration profiles for FITC-dextrans follow simple diffusion theory with diffusion coefficients, D , essentially independent of loading or release characteristic of reversible absorption. Although strongly size-excluded, these solutes do not interact specifically with the polymer network. Diffusivities are accordingly predicted from a large-pore effective-medium (LPEM) model developed to account for solute size, hydrodynamic drag, and distribution of mesh sizes available for transport in the polymer network. For this class of solute, anrs of magnitude slower than that of dextran of similar hydrodynamic radius. Desorption of avidin is not cd using no adjustable parameters, diffusivities predicted from the new effective-medium model demonstrate good agreement with experiment. For the specific-interacting cationic protein, avidin, gel loading is 3 ordeomplete even after 2 weeks of extraction. On the basis of size alone, avidin is strongly size-excluded, yet it exhibits a partition coefficient of over 20. For the positively charged protein, we observed specific ion binding on the negatively charged carboxylate groups of MAA-decorated polymer strands in the larger mesh spaces. Finally, simple linear sorption kinetics gives an adsorption time constant of 5 min and a desorption time constant of about 20 days, suggesting nearly irreversible uptake of cationic avidin on the anionic gel matrix.

diffusion↗

Nonspecifically bound proteins spin while diffusing along DNA

It is known that DNA-binding proteins can slide along the DNA helix while searching for specific binding sites, but their path of motion remains obscure. Do these proteins undergo simple one-dimensional (1D) translational diffusion, or do they rotate to maintain a specific orientation with respect to the DNA helix? We measured 1D diffusion constants as a function of protein size while maintaining the DNA-protein interface. Using bootstrap analysis of single-molecule diffusion data, we compared the results to theoretical predictions for pure translational motion and rotation-coupled sliding along the DNA. The data indicate that DNA-binding proteins undergo rotation-coupled sliding along the DNA helix and can be described by a model of diffusion along the DNA helix on a rugged free-energy landscape. A similar analysis including the 1D diffusion constants of eight proteins of varying size shows that rotation-coupled sliding is a general phenomenon. The average free-energy barrier for sliding along the DNA was 1.1 {+-} 0.2 k{sub B}T. Such small barriers facilitate rapid search for binding sites.

59 BASIC BIOLOGICAL SCIENCES↗

Superionic-like diffusion in yttrium dihydride

For the next-generation high temperature microreactors, yttrium dihydride (YH 2 ) is an attractive solid state neutron moderator. Despite a number of recent investigations, the mechanism of hydrogen transport remains poorly understood. Experimental evaluations of diffusivity are inconclusive with large variations in diffusivities and activation energies. In this work, we perform ab initio molecular dynamics (AIMD) simulations on YH 2 for temperatures spanning 300 K to 1200 K. Our main finding is that YH 2 shows a superionic-like behavior with hydrogen atoms hopping from one native site to another above a characteristic temperature of 800 K. This correlated motion results in quasi-one-dimensional string-like displacements that enable the hydrogen atoms to diffuse rapidly. We confirm that the octahedral sites are mostly unoccupied, although channeling through them is the most favored pathway between lattice hops above 800 K. At the highest temperature of 1200 K, the string relaxation time is merely of the order of a few picoseconds, which indicates a liquid-like diffusive behavior. Based on the formation of spontaneous thermal vacancies, an order-disorder crossover temperature T α ~ 800 K is established for YH 2 with an activation energy of 0.83 eV for hydrogen diffusion in the superionic-like state.

Superionic-like Diffusion↗

Experimental study of the Hall effect and electron diffusion region during magnetic reconnection in a laboratory plasma

The Hall effect during magnetic reconnection without an external guide field has been extensively studied in the laboratory plasma of the Magnetic Reconnection Experiment [M. Yamada et al., Phys. Plasmas 4, 1936 (1997)] by measuring its key signature, an out-of-plane quadrupole magnetic field, with magnetic probe arrays whose spatial resolution is on the order of the electron skin depth. The in-plane electron flow is deduced from out-of-plane magnetic field measurements. The measured in-plane electron flow and numerical results are in good agreement. The electron diffusion region is identified by measuring the electron outflow channel. The width of the electron diffusion region scales with the electron skin depth ({approx}5.5-7.5c/{omega}{sub pe}) and the peak electron outflow velocity scales with the electron Alfven velocity ({approx}0.12-0.16V{sub eA}), independent of ion mass. The measured width of the electron diffusion region is much wider and the observed electron outflow is much slower than those obtained in 2D numerical simulations. It is found that the classical and anomalous dissipation present in the experiment can broaden the electron diffusion region and slow the electron outflow. As a consequence, the electron outflow flux remains consistent with numerical simulations. The ions, as measured by a Mach probe, have a much wider outflow channel than the electrons, and their outflow is much slower than the electron outflow everywhere in the electron diffusion region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of ICRF-Induced Ion Diffusion Coefficients Calculated with the DC and AORSA Codes

The DC (Diffusion Coefficient) code obtains RF diffusion coefficients by direct numerical integration of the Lorentz force equation for ion motion in the combined equilibrium fields and the RF full wave EM fields from the AORSA full-wave code. Suitable averaging over initial gyro- and toroidal-angle of coordinate 'kicks' after a bounce-period, gives noise-free bounce-averaged diffusion coefficients. For direct comparison with zero-banana-width coefficients from AORSA, perpendicular-drift terms in the Lorentz equation are subtracted off the integration. The DC code has been coupled to the CQL3D Fokker-Planck code. For a C-Mod minority ion ICRF heating test case, the total power absorption using the diffusion coefficients agree well, and the profiles are similarly close. This supports the DC calculation and the Kennel-Engelmann-based, no-correlations, coefficient calculation in AORSA. However, resonance correlations cause large differences in the pitch angle variations of the diffusion coefficients, and in the resulting evolution of the ion distribution functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring Diffusivity in Supercooled Liquid Nanoscale Films using Inert Gas Permeation: I. Kinetic Model and Scaling Methods

We describe in detail a diffusion model used to simulate inert gas transport through supercooled liquid overlayers. In recent work, the transport of the inert gas has been shown to be an effective probe of the diffusivity of supercooled liquid methanol in the experimentally challenging regime near the glass transition temperature. The model simulations accurately and quantitatively describe the inert gas permeation desorption spectra. The simulation results are used to validate universal scaling relationships between the diffusivity, overlayer thickness, and the temperature ramp rate for isothermal and temperature programmed desorption. From these scaling relationships we derive simple equations from which the diffusivity can be obtained using the peak desorption time or temperature for an isothermal or set of TPD experiments respectively without numerical simulation. The results presented here demonstrate that the permeation of gases through amorphous overlayers has the potential to be a powerful technique to obtain diffusivity data in deeply supercooled liquids.

10 SYNTHETIC FUELS↗

Influence of crystal orientation and ion bombardment on the nitrogen diffusivity in single-crystalline austenitic stainless steel

The nitrogen diffusivity in single-crystalline AISI 316L austenitic stainless steel (ASS) during ion nitriding has been investigated at different crystal orientations ((001), (110), (111)) under variations of ion flux (0.3-0.7 mA cm{sup -2}), ion energy (0.5-1.2 keV), and temperature (370-430 deg. C). The nitrogen depth profiles obtained from nuclear reaction analysis are in excellent agreement with fits using the model of diffusion under the influence of traps, from which diffusion coefficients were extracted. At fixed ion energy and flux, the diffusivity varies by a factor up to 2.5 at different crystal orientations. At (100) orientation, it increases linearly with increasing ion flux or energy. The findings are discussed on the basis of atomistic mechanisms of interstitial diffusion, potential lattice distortions, local decomposition, and ion-induced lattice vibrational excitations.

36 MATERIALS SCIENCE↗

Iron and nitrogen self-diffusion in non-magnetic iron nitrides

The self-diffusion of iron and nitrogen is measured in nm range non-magnetic iron nitride thin films. Two non-magnetic iron nitrides, Fe{sub 2.23}N and FeN, were studied using neutron reflectivity. Neutron reflectivity with a depth resolution in the sub-nm range has a different scattering cross section for isotopes, providing a unique opportunity to measure very small diffusivities. The isotope heterostructure in thin film multilayers [Fe-N/{sup 57}Fe-N]{sub 10} and [Fe-N/Fe-{sup 15}N]{sub 10} were prepared using magnetron sputtering. It was observed that nitrogen diffuses slower than iron although the atomic size of iron is larger than that of nitrogen. It was found that a significantly larger group of N atoms participates in the diffusion process than of Fe, making N diffusion slower than that of Fe.

36 MATERIALS SCIENCE↗

Effect of superbanana diffusion on fusion reactivity in stellarators

Fusion reactivity is usually obtained using a Maxwellian distribution. However, energy-dependent radial diffusion can modify the energy distribution. Superbanana diffusion is energy-dependent and occurs in nonaxisymmetric magnetic confinement devices, such as stellarators, because of ripple-trapped particles which can take large steps between collisions. In this paper, the D-T fusion reactivity is calculated using a non-Maxwellian energy distribution obtained by solving the Fokker-Planck equation numerically, including radial superbanana diffusion as well as energy scattering. The ions in the tail of the distribution, with energies larger than thermal, which are most needed for fusion, are depleted by superbanana diffusion. In this paper, it is shown that the D-T fusion reactivity is reduced by tail ion depletion due to superbanana diffusion, by roughly a factor of 0.5 for the parameters used in the calculation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Doping dependence of self-diffusion in germanium and the charge states of vacancies

Self-diffusion in boron-doped germanium has been studied at temperatures between 526 and 749 Degree-Sign C with secondary ion mass spectrometry. Self-diffusion under acceptor doping is retarded compared to intrinsic conditions. This demonstrates the contribution of charged vacancies in self-diffusion. Taking into account the dominance of doubly negatively charged vacancies under donor doping, the doping dependence of self-diffusion is best described with an inverse level ordering for singly and doubly negatively charged vacancies for all doping conditions. The level ordering explains the dominance of doubly charged vacancies under donor doping and their decreasing contribution with increasing acceptor doping until neutral vacancies mediate self-diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The B{sup −3/2} diffusion in magnetized plasma

Fluid equations with transport effects have been derived from summing up discrete particle effects in the configuration space. The diffusion coefficient takes a form different from, but equivalent to, the Kubo formula. By taking into account the decoherence along the field lines, the diffusive damping in the perpendicular direction, and the finite Larmor radius effect in the cyclotron resonance, it is shown that the diffusion of magnetized 3d plasma has a regime of B{sup −3/2} scaling which lies between the Bohm diffusion of B{sup −1} and the classical diffusion of B{sup −2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of interface bonding and defects on boron diffusion at Si/SiO{sub 2} interface

We perform first-principles density functional calculations to find the migration pathway and barrier for B diffusion at the Si/SiO{sub 2} interface. For various interface models, in which crystalline α-quartz or amorphous silica (a-SiO{sub 2}) is placed on Si, we examine stable and metastable configurations of B-related defects which play a role in B diffusion. While a substitutional B alone is immobile in Si, it tends to diffuse to the interface via an interstitialcy mechanism in the presence of a self-interstitial and then changes into an interstitial B in oxide via a kick-out mechanism, leaving the self-interstitial at the interface. At the defect-free interface, where bridging O atoms are inserted to remove interface dangling bonds, an interstitial B prefers to intervene between the interface Si and bridging O atoms and subsequently diffuses through the hollow space or along the network of the Si-O-Si bonds in oxide. The overall migration barriers are calculated to be 2.02–2.12 eV at the Si/α-quartz interface, while they lie in the range of 2.04 ± 0.44 eV at the Si/a-SiO{sub 2} interface, similar to that in α-quartz. The migration pathway and barrier are not significantly affected by interface defects such as suboxide bond and O protrusion, while dangling bonds in the suboxide region can increase the migration barrier by about 1.5 eV. The result that the interface generally does not hinder the B diffusion from Si to SiO{sub 2} assists in understanding the underlying mechanism for B segregation which commonly occurs at the Si/SiO{sub 2} interface.

36 MATERIALS SCIENCE↗

Investigation of particle diffusion and suprathermal electrons in a magnetized helium plasma column

Studying radiative properties of magnetized helium plasma via high-resolution spectroscopy identified close correlations between the particle diffusion and suprathermal electrons for different modes of operation of the MISTRAL installation. The standard diagnostic emission lines in neutral helium (1s3d {sup 3}D-1s2p {sup 3}P, 1s3s {sup 3}S-1s2p {sup 3}P, 1s3d {sup 1}D-1s2p {sup 1}P, and 1s3s {sup 1}S-1s2p {sup 1}P) show anomalous ratios that are related to enhanced particle diffusion and suprathermal electron generation. The supplementary investigation of singlet/triplet Rydberg series (transitions 1snd {sup 3}D-1s2p {sup 3}P and 1s5p {sup 1}P-1s2s {sup 1}S) as well as ionic lines (HeII, transitions n = 3–4 at 469 nm and n = 4–6 at 656 nm) allowed quantitative characterization. Simulations carried out with the atomic physics code SOPHIA demonstrate that simultaneous implementation of diffusion processes and suprathermal electrons matches all experimental findings. Single consideration, however, of either diffusion or hot electrons is in contradiction to the proposed extended set of HeI and HeII emission lines. The high precision achieved with the LSJ-split level structure of SOPHIA coupled to Langmuir probe measurements allowed to conclude to a Bohm type diffusion in MISTRAL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of the fluorescence correlation spectroscopy (FCS) standard Rhodamine 6G and calibration of its diffusion coefficient in aqueous solutions

Precise diffusion measurements of rhodamine 6G (Rh6G) dissolved in D{sub 2}O at concentrations between 50 and 200 μM were carried out in the temperature range from 280 to 320 K using pulsed field gradient nuclear magnetic resonance (PFG-NMR). The obtained diffusion coefficients can be used as a calibration reference in fluorescence correlation spectroscopy (FCS). Besides measuring the diffusivity of Rh6G, the diffusion coefficient of the solvent in the same system could be determined in parallel by PFG-NMR as the resonances of water and Rh6G are well separated in the {sup 1}H NMR spectrum. To analyze the differences due to the isotope effect of the solvent (D{sub 2}O vs. H{sub 2}O), the correlation time τ{sub D} of Rh6G was measured by FCS in both D{sub 2}O and H{sub 2}O. The obtained isotopic correction factor, τ{sub D}(D{sub 2}O)/τ{sub D}(H{sub 2}O) = 1.24, reflects the isotope effect of the solvent´s self-diffusion coefficients as determined previously by PFG-NMR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗