Sound propagation in rarefied gases.
Attenuation and dispersion of sound in nearly collisionless gases as function of sound-to- particle path ratio
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Attenuation and dispersion of sound in nearly collisionless gases as function of sound-to- particle path ratio
Mathematical analysis and dispersion relations are used to obtain the general functional form of the neutrino charge form-factor. It is shown that if the scale for weak interactions is given by G, where G is the Fermi coupling constant, then for a large range of momentum transfer values, the form-factor may be approximated by a function that is linear in the square of the momentum transfer.
The propagation of finite-amplitude internal waves in a shear flow is considered for wavelengths that are long compared to the shear-layer thickness. Both singular and regular modes are investigated, and the equation governing the amplitude evolution is derived. The theory is generalized to allow for a radiation condition when the region outside the stratified shear layer is unbounded and weakly stratified. In this case, the evolution equation contains a damping term describing energy loss by radiation which can be used to estimate the persistence of solitary waves or nonlinear wave packets in realistic environments. A continuous three-layer model is studied in detail and closed-form expressions are obtained for the phase speed and the coefficients of the nonlinear and dispersive terms in the amplitude equation as a function of Richardson number.
The distribution of tangential velocities for arbitrary halo velocity dispersions and rotation rates are explicitly computed, assuming a particular form of the halo velocity distribution function near the sun. It is found that for a specific model of the halo velocity dispersion tensor that Schmidt's (1975) estimate of the mass carried by halo stars of 0.25-0.70 solar masses should be revised by a factor of between 1.0 and 2.0, depending on the rotation rate of the halo. Although obtaining a mass density in all stars from the stellar density in that mass range is extremely uncertain, it is found, in agreement with earlier work, that even under rather extreme assumptions about the remnants the observed stars and expected remnants fail to provide the theoretically expected mass. Comparison of the luminosity to the theoretical mass yields a mass to light ratio consistent with that of rich clusters of galaxies.
Time and flow-direction responses of shearstress-sensitive liquid crystal coatings were explored experimentally. For the time-response experiments, coatings were exposed to transient, compressible flows created during the startup and off-design operation of an injector-driven supersonic wind tunnel. Flow transients were visualized with a focusing Schlieren system and recorded with a 1000 frame/sec color video camera. Liquid crystal responses to these changing-shear environments were then recorded with the same video system, documenting color-play response times equal to, or faster than, the time interval between sequential frames (i.e., 1 millisecond). For the flow-direction experiments, a planar test surface was exposed to equal-magnitude and known-direction surface shear stresses generated by both normal and tangential subsonic jet-impingement flows. Under shear, the sense of the angular displacement of the liquid crystal dispersed (reflected) spectrum was found to be a function of the instantaneous direction of the applied shear. This technique thus renders dynamic flow reversals or flow divergences visible over entire test surfaces at image recording rates up to 1 KHz. Extensions of the technique to visualize relatively small changes in surface shear stress direction appear feasible.
High flux evaporations from a steady meniscus formed in a 2 micron channel is modeled using the augmented Young-Laplace equation. The heat flux is found to be a function of the long range van der Waals dispersion force which represents interfacial conditions between heptane and various substrates. Heat fluxes of (1.3-1.6) x 10(exp 6) W/m(exp 2) based on the width of the channel are obtained for heptane completely wetting the substrate at 100 C. Small channels are used to obtain these large fluxes. Even though the real contact angle is 0 deg, the apparent contact angle is found to vary between 24.8 deg and 25.6 deg. The apparent contact angle, which represents viscous losses near the contact line, has a large effect on the heat flow rate because of its effect on capillary suction and the area of the meniscus. The interfacial heat flux is modeled using kinetic theory for the evaporation rate. The superheated state depends on the temperature and the pressure of the liquid phase. The liquid pressure differs from the pressure of the vapor phase due to capillarity and long range van der Waals dispersion forces which are relevant in the ultra think film formed at the leading edge of the meniscus. Important pressure gradients in the thin film cause a substantial apparent contact angle for a complete wetting system. The temperature of the liquid is related to the evaporation rate and to the substrate temperature through the steady heat conduction equation. Conduction in the liquid phase is calculated using finite element analysis except in the vicinity of the thin film. A lubrication theory solution for the thin film is combined with the finite element analysis by the method of matched asymptotic expansions.
We present Goddard High-Resolution Spectrograph intermediate observations of the interstellar medium toward HD 116852, a low halo star at a distance of 4.8 kpc (z = -1.3 kpc) in the direction l = 304. deg 9, b = 16.deg 1. The small science aperture observations have signal-to-noise ratios ranging from 30 to 90 and resolutions of 11 to 18 km/s (FWHM). We confirm the optical MK classification of this star through an analysis of its ultraviolet photosperic and stellar wind profiles. We detect interstellar lines of Al III, Si IV, C IV, and N V together with lines of C I, C I*, C I**, Si II, Ge II, P II, and Ni II. We convert the Mg II, P II, S II, Al III, Si IV, C IV, and N V profiles into measure of apparent column density as a function of LSR velocity. Gas scale height, velocity dispersion, and differential Galactic rotation effects govern the profile shapes. A simple computer model of the expected sight line column density profiles for the low and high ion species indicates that the gas velocity dispersions and scale heights increase as the ionization level of the gas increases. We find scale heigts H greater than or = 1 kpc for the high ions, which are comparable to the z-distance of the star, whereas we find H approximatley = 0.6 to 0.7 kpc for A1 III and H approximatley 0.1 kpc for P II and Ge II. An enhancement in the Al II profile near -15 km/s accounts for approximately 25% of the A1 III column along the sight line and probably arises within gas located approximately 500 pc below the Sagittarius-Carina spiral arm link. Portions of the broad underlying A1 III distribution are associated with the higher ionization lines, perhaps in conductive interfaces. The presence of N V and the column density ratios of Si IV, C IV, and N V favor the interpretation that much of the high ion absorption is produced by collisional ionization in gas with T = 1-3 x 10(exp 5) K. An enhancement near -35 km/s in both the Si IV and C IV profiles may be due to an outflow from the Norma spiral arm at a z-distance of about -1 kpc. The smooth decrease of the N(C IV)/N(Si IV) ratio at negative velocities may be due to an ISM ionization structure for hot gas that changes distance from the Galactic plane or to a two phase gas distribution in which the relative contribution from each phase changes with distance from the Galactic plane.
Boron nitride nanotubes (BNNT) uniformly dispersed in stretchable materials, such as poly(dimethylsiloxane) (PDMS), could create the next generation of composites with augmented mechanical, thermal, and piezoelectric characteristics. This work reports tunable piezoelectricity of multifunctional BNNT/PDMS stretchable composites prepared via co-solvent blending with tetrahydrofuran (THF) to disperse BNNTs in PDMS while avoiding sonication or functionalization. The resultant stretchable BNNT/PDMS composites demonstrate augmented Young’s modulus (200% increase at 9 wt% BNNT) and thermal conductivity (120% increase at 9 wt% BNNT) without losing stretchability. Further-more, BNNT/PDMS composites demonstrate piezoelectric responses that are linearly proportional to BNNT wt%, achieving a piezoelectric constant (|d33|) of 18 pmV−1 at 9 wt% BNNT without poling, which is competitive with commercial piezoelectric polymers. Uniquely, BNNT/PDMS accommodates tensile strains up to 60% without plastic deformation by aligning BNNTs, which enhances the composites’ piezoelectric response approximately five times. Finally, the combined stretchable and piezoelectric nature of the composite was exploited to produce a vibration sensor sensitive to low-frequency (≈1 kHz) excitation. This is the first demonstration of multifunctional, stretchable BNNT/PDMS composites with enhanced mechanical strength and thermal conductivity and furthermore tunable piezoelectric response by varying BNNT wt% and applied strain, permitting applications in soft actuators and vibration sensors.
Other than open bodies of water, bulk liquids are rarely encountered in the environment. Rather, liquids are typically found as aerosols, liquid droplets, or liquid layers on sundry substrates: glass, concrete, metals, etc. The layers can be of varying thicknesses, from micron-level to millimeter thick deposits. The infrared (IR) reflectance spectra of such deposits vary greatly, approximating the bulk reflectance for thicker deposits and for thinner layers on reflective surfaces, producing “transflectance” spectra that more closely replicate simple transmission of the IR light twice traversing the absorptive medium. Rather than recording large numbers of such spectra to serve as endmembers of a spectral reflectance library, we have recognized that the spectra can be modeled so long as the complex optical constants n(?) and k(?) are known as a function of frequency, ?. Here n is the real (dispersion) part and k is the imaginary (absorption) component of the complex index of refraction. However, in many cases the bands in the longwave IR (7 to 13 µm) can become saturated, and better signal-to-noise and specificity can be realized at shorter wavelengths. In earlier studies, we obtained the n/k values from 1.28 to 25 µm for a series of liquids, but are now expanding those measurements to include additional liquid species and extending the spectral range to lower wavelengths. In this paper we describe the methodologies for compiling and fusing the two data sets collected to provide better and more complete spectral coverage from 1 to 25 µm (10,000 to 400 cm-1). The broad spectral range means that one needs to account for both strong and weak spectral features, all of which can be useful for detection, depending on the scenario. To account for the large dynamic range, both long and short path length transmission cells are required for accurate measurements.
We present the results of synthetic tests that aim at evaluating the relative performance of three different definitions of misfit functionals in the context of 3-D imaging of shear wave attenuation in the earth’s upper mantle at the global scale, using long-period full-waveform data. The synthetic tests are conducted with simple hypothetical upper-mantle models that contain Q μ anomalies centred at different depths and locations, with or without additional seismic velocity anomalies. To build synthetic waveform data sets, we performed simulations of 50 events in the hypothetical (target) models, using the spectral element method, filtered in the period range 60–400 s. The selected events are chosen among 273 events used in the development of radially anisotropic model SEMUCB-WM1 and recorded at 495 stations worldwide. The synthetic Z-component waveforms correspond to paths and time intervals (fundamental mode and overtone Rayleigh waves) that exist in the real waveform data set. The inversions for shear attenuation structure are carried out using a Gauss–Newton optimization scheme in which the gradient and Hessian are computed using normal mode perturbation theory. The three different misfit functionals considered are based on time domain waveform (WF) and waveform envelope (E-WF) differences, as well as spectral amplitude ratios (SA), between observed and predicted waveforms. We evaluate the performance of the three misfit functional definitions in the presence of seismic noise and unresolved S-wave velocity heterogeneity and discuss the relative importance of physical dispersion effects due to 3-D Q μ structure. We observed that the performance of WF is poorer than the other two misfit functionals in recovering attenuation structure, unless anelastic dispersion effects are taken into account in the calculation of partial derivatives. WF also turns out to be more sensitive to seismic noise than E-WF and SA. Overall, SA performs best for attenuation imaging. Our tests show that it is important to account for 3-D elastic effects (focusing) before inverting for Q μ . Additionally, we show that including high signal-to-noise ratio overtone wave packets is necessary to resolve Q μ structure at depths greater than 250 km.
The attractive interaction in conventional BCS superconductors is provided by a bosonic mode. However, the pairing glue of most unconventional superconductors is unknown. The effect of electron-boson coupling is therefore extensively studied in these materials. A key signature are dispersion kinks that can be observed in the spectral function as abrupt changes in velocity and lifetime of quasiparticles. Here, we show the existence of two kinks in the unconventional iron-based superconductor RbFe 2 As 2 using angle-resolved photoemission spectroscopy (ARPES) and dynami- cal mean field theory (DMFT). In addition, we observe the formation of a Hubbard band multiplet due to the combination of Coulomb interaction and Hund’s rule coupling in this multiorbital systems. We demonstrate that the two dispersion kinks are a consequence of these strong many-body interactions. This interpretation is in line with a growing number of theoretical predictions for kinks in various general models of correlated materials. Our results provide a unifying link between iron-based superconductors and different classes of correlated, unconventional superconductors such as cuprates and heavy-fermion materials.
In this work, we develop a machine learning-based method to characterize intracluster concentration (ρ c ), background concentration (ρ b ), clustering radius (r̄), and radius dispersity (δ r ) in simulated atom probe tomography data using multiple spatial statistics summary functions to train a Bayesian regularized neural network. Here, we build upon previous work that utilized Ripley’s K-function by incorporating additional features from nearest-neighbor spatial statistics summary functions to better characterize concentration-based metrics. The addition of nearest-neighbor based features allows for highly accurate estimates of ρ c and ρ b , both with 90% of the predictions within 4.0% of the real value; the root-mean-square errors are reduced by 81.5% and 92.8% from predictions using only K-function based features, respectively. Additionally, including these nearest-neighbor based features improves the ability to differentiate between r̄ and δ r .
Density-functional theory (DFT) has been widely used to study water and ice for at least 20 years. However, the reliability of different DFT exchange-correlation (xc) functionals for water remains a matter of considerable debate. This is particularly true in light of the recent development of DFT based methods that account for van der Waals (vdW) dispersion forces. Here, we report a detailed study with several xc functionals (semi-local, hybrid, and vdW inclusive approaches) on ice Ih and six proton ordered phases of ice. Consistent with our previous study [B. Santra, J. Klimeš, D. Alfè, A. Tkatchenko, B. Slater, A. Michaelides, R. Car, and M. Scheffler, Phys. Rev. Lett. 107, 185701 (2011)] which showed that vdW forces become increasingly important at high pressures, we find here that all vdW inclusive methods considered improve the relative energies and transition pressures of the high-pressure ice phases compared to those obtained with semi-local or hybrid xc functionals. However, we also find that significant discrepancies between experiment and the vdW inclusive approaches remain in the cohesive properties of the various phases, causing certain phases to be absent from the phase diagram. Therefore, room for improvement in the description of water at ambient and high pressures remains and we suggest that because of the stern test the high pressure ice phases pose they should be used in future benchmark studies of simulation methods for water.
The method of angular- and wavelength-dispersive (e.g. two-dimensional) Rietveld refinement is a new and emerging tool for the analysis of neutron diffraction data measured at time-of-flight instruments with large area detectors. Following the approach for one-dimensional refinements (using either scattering angle or time of flight), the first step at each beam time cycle is the calibration of the instrument including the determination of instrumental contributions to the peak shape variation to be expected for diffraction patterns measured by the users. The aim of this work is to provide the users with calibration files and – for the later Rietveld refinement of the measured data – with an instrumental resolution file (IRF). This article will elaborate on the necessary steps to generate such an IRF for the angular- and wavelength-dispersive case, exemplified for the POWGEN instrument. A dataset measured on a standard diamond sample is used to extract the profile function in the two-dimensional case. It is found that the variation of reflection width with 2θ and λ can be expressed by the standard equation used for evaluating the instrumental resolution, which yields a substantially more fundamental approach to the parameterization of the instrumental contribution to the peak shape. Geometrical considerations of the POWGEN instrument and sample effects lead to values for Δθ, Δt and ΔL that yield a very good match to the extracted FWHM values. In a final step the refinement results are compared with the one-dimensional, i.e. diffraction-focused, case.
The microwave dielectric behavior of vegetation materials is examined as a function of water content, microwave frequency, and temperature. Dielectric spectra for various types of vegetation, such as leaves, stalks, and trunks at various moisture conditions, were measured using a coaxial probe technique. The basic features and operation of the coaxial probe system are described. Examples of dielectric measurements for the vegetation materials are presented, and the relation between temperature and the dielectric constant is studied. The development of a dual-dispersion model that accounts for the dielectric properties of water in both free and bound conditions is described. The applicability of the model is evaluated by comparing it with the dielectric data; good correlation is observed between the model and the data over a wide range of moisture conditions and over the 0.2-20 GHz range.
A systematic examination of noncovalent interactions as modeled by wavefunction theory is presented in comparison to gold-standard quality benchmarks available for 345 interaction energies of 49 bimolecular complexes. Quantum chemical techniques examined include spin-component-scaling (SCS) variations on second-order perturbation theory (MP2) [SCS, SCS(N), SCS(MI)] and coupled cluster singles and doubles (CCSD) [SCS, SCS(MI)]; also, method combinations designed to improve dispersion contacts [DW-MP2, MP2C, MP2.5, DW-CCSD(T)-F12]; where available, explicitly correlated (F12) counterparts are also considered. Dunning basis sets augmented by diffuse functions are employed for all accessible ζ-levels; truncations of the diffuse space are also considered. After examination of both accuracy and performance for 394 model chemistries, SCS(MI)-MP2/cc-pVQZ can be recommended for general use, having good accuracy at low cost and no ill-effects such as imbalance between hydrogen-bonding and dispersion-dominated systems or non-parallelity across dissociation curves. Moreover, when benchmarking accuracy is desirable but gold-standard computations are unaffordable, this work recommends silver-standard [DW-CCSD(T**)-F12/aug-cc-pVDZ] and bronze-standard [MP2C-F12/aug-cc-pVDZ] model chemistries, which support accuracies of 0.05 and 0.16 kcal/mol and efficiencies of 97.3 and 5.5 h for adenine·thymine, respectively. Choice comparisons of wavefunction results with the best symmetry-adapted perturbation theory [T. M. Parker, L. A. Burns, R. M. Parrish, A. G. Ryno, and C. D. Sherrill, J. Chem. Phys. 140, 094106 (2014)] and density functional theory [L. A. Burns, Á. Vázquez-Mayagoitia, B. G. Sumpter, and C. D. Sherrill, J. Chem. Phys. 134, 084107 (2011)] methods previously studied for these databases are provided for readers' guidance.
Synthesis, structure and magnetic properties of Co/MCM-41 as magnetic nano-composites have been investigated. Mesoporous materials with different degrees of metal loading were prepared by wet impregnation and characterized by ICP, XRD, N{sub 2} adsorption, UV–vis DRS, TPR and EPMA-EDS. Cobalt oxide clusters and Co{sub 3}O{sub 4} nano-particles could be confined inside the mesopores of MCM-41, being this fact favored by the Co loading increasing. In addition, larger crystals of Co{sub 3}O{sub 4} detectable by XRD also grow on the surface when the Co loading is enhanced. The magnetic characterization was performed in a SQUID magnetometer using a maximum magnetic applied field µ{sub 0}Ha=1 T. While the samples with the higher Co loadings showed a behavior typically paramagnetic, a superparamagnetic contribution is more notorious for lower loadings, suggesting high Co species dispersion. - Graphical abstract: Room temperature hysteresis loops as a function of the Co content. Display Omitted - Highlights: • Co species as isolated Co{sup 2+}, oxide clusters and Co{sub 3}O{sub 4} nano-particles were detected. • For higher Co loads were detected, by XRD, Co{sub 3}O{sub 4} particles on the external surface. • The confining of Co species inside the mesopores was achieved by increasing Co load. • Paramagnetism from oxide clusters/nano-particles becomes dominant for higher Co loads. • Superparamagnetism can be assigned to Co species of small size and finely dispersed.
The thermodynamic properties of the tetragonal RNi{sub 2}B{sub 2}C (R=Y, Lu) are investigated by means of the density-functional theory (DFT) and density-functional perturbation theory (DFPT) within the quasiharmonic approximation (QHA). The phonon dispersion curves and phonon total and partial density of states are studied, and it is found that the phonon branches can be divided into three obvious regions: a low-frequency region (LFR), an intermediate-frequency region (IFR), and a high-frequency region (HFR). The temperature dependence of the various quantities including isothermal bulk modulus, thermal expansion coefficient, and heat capacity is obtained, and the variation features of these quantities with temperature are discussed in detail.