Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Treatment surfaces with atomic oxygen excited in dielectric barrier discharge plasma of O{sub 2} admixed to N{sub 2}

This paper describes the increase in surface energy of substrates by their treatment with gas composition generated in plasmas of DBD (Dielectric Barrier Discharge) in O2 admixed with N2. Operating gas dissociation and excitation was occurred in plasmas developed in two types of reactors of capacitively-coupled dielectric barrier configurations: coaxial cylindrical, and flat rectangular. The coaxial cylindrical type comprised an inner cylindrical electrode encapsulated in a ceramic sheath installed coaxially inside a cylindrical ceramic (quartz) tube passing through an annular outer electrode. Components of the flat rectangular type were a flat ceramic tube of a narrow rectangular cross section supplied with two flat electrodes mounted against one another outside of the long parallel walls of this tube. The operating gas, mixture of N{sub 2} and O{sub 2}, was flowing in a completely insulated discharge gap formed between insulated electrodes of the devices with an average velocity of gas inlet of about 7 to 9 m/s. Dielectric barrier discharge plasma was excited in the operating gaps with a bipolar pulse voltage of about 6 kV for 2 ms at 50 kHz repetition rate applied to the electrodes of the coaxial device, and of about 14 kV for 7 ms at 30 kHz repetition rate for the flat linear device. A lifetime of excited to the 2s{sup 2}2p{sup 4}({sup 1}S{sub 0}) state in DBD plasma and streaming to the surfaces with a gas flow atomic oxygen, responsible presumably for treating surfaces, exceeded 10 ms in certain cases, that simplified its separation from DBD plasma and delivery to substrates. As it was found in particular, surfaces of glass and some of polymers revealed significant enhancement in wettability after treatment.

36 MATERIALS SCIENCE↗

Electrochemical reduction of europium(iii) using tetra- n -octyl diglycolamide functionalized ordered mesoporous carbon microelectrodes

This work investigates the one-electron reduction of Eu(III) to Eu(II) with ordered mesoporous carbon (OMC) in cavity microelectrode (CME) systems. OMC materials with and without tetra-n-octyl diglycolamide (TODGA) functionalization were subjected to voltammetric measurements and compared with commercial carbon black Vulcan® XC-72. The electrochemical reduction of solution Eu(III) with unfunctionalized OMC, XC-72, and TODGA-functionalized OMC—both within the electrode matrix and on the electrode surface—is reported. The complexation of Eu(III) by TODGA-functionalized OMC prior to electrode preparation incorporates Eu(III) as part of the bulk electrode matrix. Under these conditions, the high capacitance obscures the Eu(III)/Eu(II) redox couple. A signal emerges above the background (capacitive) currents when 2-octanol is added to the TODGA-functionalized OMC as a wetting agent. In contrast, surface Eu(III)–TODGA complexation, when Eu(III) contacts the electrode surface exclusively after electrode preparation, provides a strong response. The addition of 2-octanol to TODGA reduces the capacitance of the electrode and narrows the Eu(III)/Eu(II) redox peak widths. In conclusion, the desorption by reductive stripping of Eu(II) was demonstrated using a 2-octanol modified TODGA OMC CME, opening the possibility for selective separation of Eu from adjacent trivalent lanthanides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental results with fuel cell start-up and shut-down. Impact of type of carbon for cathode catalyst support

Separate testing protocols for fuel cell startups and shutdowns were developed to distinguish between their effects on reverse currents and CO 2 evolution. The internal currents and the local potentials were measured with different membrane-electrode assemblies (MEAs): we examined the influence of the type of carbon for cathode catalyst support as well as the mitigating effect of low anode Pt loading. In conclusion, significant differences were observed and the experiments also confirmed previous results that the evolved CO 2 accounts for less than 25% of the total exchanged charge.

30 DIRECT ENERGY CONVERSION↗

Research on rechargeable oxygen electrodes.

A research program is described which consisted of studying the effects of electrode cycling in very pure KOH solutions, with and without controlled additions of impurities, on oxide formation, oxygen evolution kinetics, oxygen reduction kinetics (including hydrogen peroxide formation), and changes in electrode structure. Bright platinum, platinized platinum, and Teflon-bonded platinum black electrodes were studied. Three main problem areas are identified: the buildup of a refractory anodic layer on prolonged cycling, which leads to a degradation of performance; the dissolution and subsequent deposition of dendritic platinum in the separator, leading to short-circuit ing and loss of electrocatalyst; and the disruptive effect of bubbling during gas evolution on charge. Each of these problem areas is analyzed, and remedial solutions are proposed.

Giner, J.↗

Validation test of 125 Ah advanced design IPV nickel-hydrogen flight cells

An update of validation test results confirming the advanced design nickel-hydrogen cell is presented. An advanced 125 Ah individual pressure vessel Ni-H cell was designed. The primary function of the advanced cell is to store and deliver energy for long-term LEO spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent KOH electrolyte; (2) use of a patented catalyzed wall wick; (3) use of serrated-edge separators to facilitate gaseous O and H flow within the cell, while maintaining physical contact with the wall wick for electrolyte management; and (4) use of a floating rather than a fixed stack to accommodate Ni electrode expansion due to charge/discharge cycling. The significant improvements resulting from these innovations are extended cycle life; enhanced thermal, electrolyte, and oxygen management; and accommodation of Ni electrode expansion. Six 125 Ah flight cells based on this design were fabricated; the catalyzed wall wick cells have been cycled for over 19,000 cycles with no cell failures in the continuing test. Two of the noncatalyzed wall wick cells failed (cycles 9588 and 13,900).

Smithrick, John J.↗

Fabrication of submicron metallic grids with interference and phase-mask holography

Complex, submicron Cu metallic mesh nanostructures are made by electrochemical deposition using polymer templates made from photoresist. The polymer templates are fabricated with photoresist using two-beam interference holography and phase mask holography with three diffracted beams. Freestanding metallic mesh structures are made in two separate electrodepositions with perpendicular photoresist grating templates. Cu mesh square nanostructures having large (52.6%) open areas are also made by single electrodeposition with a photoresist template made with a phase mask. These structures have potential as electrodes in photonic devices.

36 MATERIALS SCIENCE↗

Dual Stage Sodium Thermo-Electro-Chemical Converter (Na-TEC)

The need for reliable and distributable energy is evident, but one prominent obstacle is the lack of an efficient direct heat-to-electricity converter. The sodium thermo-electro-chemical converter (Na-TECC) is a highly efficient thermally regenerative electrochemical system (TRES) that can fill this void. This device uses an ion-selective solid-electrolyte called beta”-alumina that is highly conductive to sodium cations. The Na-TECC generates electric power by allowing high pressure sodium cations to expand isothermally through the solid-electrolyte. Theoretically, a device interacting with thermal reservoirs at 1150 K and 550 K should operate above 45% efficiency, but actual devices have not surpassed efficiencies of 20%. The maximum potential voltage in these previous devices was substantially reduced by the kinetic limitations of the charge transfer in the cathode, by pressure losses through the porous electrodes, and by Joule heating losses caused by the solid-electrolyte, electrode, and current collector resistances. To overcome these low efficiencies, a dual stage conversion process is being proposed. Rather than using one isothermal expansion step, the dual cycle will employ a second electrolyte to allow two separate expansion steps: one at the high temperature, and another at an intermediate temperature. This new cycle is thermodynamically favorable as it allows for regeneration from the isobaric cooling of the first expansion step, and reheat to complete the expansion in the second step. This allows the engine to reach a lower condenser temperature than its single stage counterpart for a given heat input, resulting in an increased overall efficiency. The temperature drop across each electrolyte in the dual stage device (e.g., ~ 400 K) is smaller than the temperature drop across a comparable single stage device (e.g., ~ 600 K). This makes the device amenable to better thermal management and allows for less heat loss. Also, the intermediate stage will mitigate the thermal shock across the very thin (< 1 mm) solid electrolyte, reduce crack propagation, limit the percolation of the molten dendrites, and ultimately increase the lifetime of the device. A dual stage concept for the Na-TECC has never been demonstrated in literature, so it is necessary to properly re-define the thermodynamic parameters such as heat loss, maximum power, and optimal current density. Certain drawbacks from a dual stage concept will also be addressed, such as the need for larger electrochemical area and the increased pressure losses. It will be demonstrated that the dual stage device must have lower thermal losses than a single stage device if it is to have a higher efficiency. The improved operation of the Na-TECC can have a transformational effect on small combined heat and power (CHP) systems at the 1-5 kW range.

14 SOLAR ENERGY↗

VTO FY20Q4 quarterly report

Project Objective.This project has three objectives: (1) tuning microstructures of 3D-printed SSE separators,(2) determining material and processing compatibilities with cathode printing,and (3)3D printing of sintering-free SSE separators.Project Impact.All-solid-state lithium batteries are difficult to process due to the brittleness of ceramic materials, poor solid-solid contact, and electrolyte-electrode stability issues. As a result, the energy and power density and also cycling stability are far from satisfying. This project will address fabrication difficulties by using state-of-the-art 3D-printing techniques that can introduce 3D interfaces and architectures to enhance solid-solid contact and reduce charge transfer resistance. Success will benefit the DOE by establishing the best manufacturing methods for ASSBsto achieve VTO goals on the performance of beyond Li-ion batteries. Approach.The project employs 3D-printing techniques to manufacture SSEs and related components for ASSBs. The team starts with direct ink writing (DIW) to develop ink recipes with desired rheological properties and explore post-sintering approaches to achieve high densification. In parallel with DIW3D printing, the team also explores other 3D printing options, such as projection microstereolithography (PuSL). Both sintering and sintering-free approaches can gain benefit from 3D printing and therefore will be investigated.Out-Year Goals.The team will determine particle sizes and morphologies as well as post-processing conditions that deliver good ionic conductivity and charge transfer properties of LLZTO separators. They will examine co-sintering of LLZTO/cathode and determine the effects of material, particle size, surface coating, and sintering conditions.Collaborations.Microstructures, ionic conductivities, and mechanical properties will be provided to the LLNL simulation team, led by PI B. Wood, for establishing and validating phase-field modeling methods.

36 MATERIALS SCIENCE↗

In-situ characterization of rapid crystallization of amorphous CoFeB electrods in CoFeB/MgO/CoFeB junctions during thermal annealing.

We report the crystallization study of CoFeB/MgO/CoFeB magnetic tunnel junctions using in-situ, time-resolved synchrotron-based x-ray diffraction and transmission electron microscopy. It was found that the crystallization of amorphous CoFeB electrodes occurs on a time scale of seconds during the postgrowth high temperature annealing. The crystallization can be well fit by the Johnson-Mehl-Avrami model and the effective activation energy of the process was determined to be 150 kJ/mol. The solid-state epitaxy mode of CoFeB was found to involve separate crystallization at different locations followed by subsequent merging of small grains, instead of layer-by-layer growth of CoFeB film along the MgO template.

36 MATERIALS SCIENCE↗

Ion Transport in Batteries with Polymer Electrolytes

We discuss polymer electrolytes for use in rechargeable lithium batteries. Polymer electrolytes have the potential to enable batteries with lithium metal anodes. These batteries have significantly higher theoretical energy densities than current lithium-ion batteries. We consider binary mixtures of polymers and salts. We also cover more complex systems such as polymer electrolytes swollen with a solvent (gel polymer electrolytes) and microphase separated polymer electrolytes. By covalently attaching the anions to the chains in a polymer solid, one obtains a single-ion conductor. We mainly focus on experiments wherein the polymer electrolyte is placed between two lithium metal electrodes. These experiments enable the determination of three transport parameters, ionic conductivity, salt diffusion coefficient, and transference number, and the thermodynamic factor. The properties of dry polymer electrolytes are contrasted with those of gel polymer electrolytes. The gel systems exhibit higher conductivity while the dry systems exhibit superior mechanical properties. We discuss interfacial impedance when lithium metal is contacted with polymer electrolytes and the importance of coulombic efficiency.

Yu, Xiaopeng↗

Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET

The interface region of welded A508–Alloy 52 M is characterized by scanning probe microscope (SPM) techniques, scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM)/Energy Dispersive Spectroscopy (EDS) and scanning vibrate electrode technique (SVET). The regions along the welded A508–Alloy 52 M interface can be categorized into two types according to their different microstructures. In the type-I interface region, A508 and Alloy 52 M are separated by the fusion boundary, while in the type-II interface region, A508 and Alloy 52 M are separated by a martensite zone. A508, martensite zone and grain boundaries in Alloy 52 M are ferromagnetic while the Alloy 52 M matrix is paramagnetic. The Volta potentials measured by scanning Kelvin probe force microscopy (SKPFM) of A508, martensite zone and Alloy 52 M follow the order: V{sub 52} {sub M} > V{sub A508} > V{sub martensite}. The corrosion behavior of A508–Alloy 52 M interface region is galvanic corrosion, in which Alloy 52 M is cathode while A508 is anode. The martensite dissolves faster than Alloy 52 M, but slower than A508 in the test solution. - Highlights: • The A508–Alloy 52 M interface regions can be categorized into two types. • The chromium depleted region is observed along the Alloy 52 M grain boundary. • The Alloy 52 M grain boundaries which are close to the interface are ferromagnetic. • Martensite zone has lower Volta potential but higher corrosion resistance than A508.

36 MATERIALS SCIENCE↗

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗

Photoelectrochemical properties of MOF-induced surface-modified TiO 2 photoelectrode

Heteroatom doping and surface modification with oxides are both important strategies to improve the photoelectrochemical (PEC) activities of TiO 2 photoelectrodes. However, it is difficult to combine the two strategies into a single synthesis process. Herein, a simple one-pot synthesis method was developed to modify a TiO 2 photoelectrode surface by N-doping while simultaneously modifying the surface with In 2 O 3 and NiO. This method involved growing MOF onto a TiO 2 surface with N-containing organic ligands and In and Ni salts as metal precursors, followed by heat treatment at 600 °C. The roles of heteroatom doping and oxide modification are proposed as follows. (i) N-Doping extends the absorption edge of the TiO 2 to a longer wavelength region and enhances visible light absorption. (ii) N-Doping together with the passivation of TiO 2 surface trap states by oxide modification increases the donor density in TiO 2 . (iii) The generated suitable interfaces on the surface of TiO 2 facilitate photogenerated charge separation and transfer. In comparison with the pristine TiO 2 photoelectrode, the metal oxide- and heteroatom-modified TiO 2 photoelectrode exhibits superior photoelectrochemical performance under both simulated sunlight and visible light illumination. Suitable substrate of the electrode, appropriate size of the as-synthesized MOF precursors, and choice of ligands and metal ions are important factors for this strategy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Parallel-plate avalanche counters for heavy-ion beam tracking: History and mysteries

Despite being an old detector concept, position-sensitive parallel-plate avalanche counters (PPACs) remain widely used today for heavy-ion position and timing measurements. In modern rare isotope beam facilities and large-acceptance fragment separators, PPACs are used to characterize beam properties (diagnostics), facilitate beam delivery (tuning), and provide event-by-event beam tracking for particle identification (PID). Most popular particle localization methods in PPAC detectors are based on strip electrodes electrically connected to resistive-chain circuits or delay lines. More exotic systems include optical readouts based on recording electroluminescence light with high-granularity photodetector arrays or high-resolution resistive anode electrodes. PPACs with conventional resistive-chain or delay-line readouts achieve typical position and time resolutions of below 1 mm ( σ ) and around 150 ps ( σ ), respectively. In addition, delay-line systems are capable of counting rates above several hundred kHz for beam areas of a few millimeters square, and around 1 MHz for larger beam sizes. Resistive-chain readouts have limited rates of a few tens of kHz. A review of the operation principles and performance of PPAC detectors is presented in this paper. We will discuss decades-long experience building and operating PPACs developed at the National Superconducting Cyclotron Laboratory, and then refined at the Facility for Rare Isotope Beams (FRIB), mostly focusing on the delay-line readout technique (DLPPAC). We will also discuss problems that arise due to electric discharges at high rates and briefly describe ongoing developments at FRIB. Published by the American Physical Society 2024

Physics↗

Hydrogen Crossover Flux through Two-Dimensional Nanomaterials

Energy storage and conversion devices require an ion-exchange membrane with high transmission of charge-balancing ions and separation of anode and cathode electrolytes/gases. This ensures optimum device performance. Most conventional membranes suffer huge cross-permeation resulting in low energy efficiency and material degradation. This work investigated hydrogen permeability and proton transmission through membrane electrode assemblies (MEAs) containing a monolayer of hexagonal boron nitride and single-layer and bi-layer graphene in a gas-phase small-scale cell and a liquid cell. Here we found that the hydrogen crossover flux through MEAs with 2D materials was inhibited by at least a factor of 5 compared to the one without. Single-layer graphene and boron nitride enabled high proton transmission, but bi-layer graphene inhibited proton conduction. Defect visualization of 2D materials revealed few atomic-scale defects in graphene. These findings suggest that a monolayer of 2D material may provide good selectivity for energy conversion and storage devices by blocking species crossover while allowing high proton transmission.

2D materials↗

Image registration for accurate electrode deformation analysis in operando microscopy of battery materials

Operando imaging techniques have become increasingly valuable in both battery research and manufacturing. However, the reliability of these methods can be compromised by instabilities in the imaging setup and operando cells, particularly when utilizing high-resolution imaging systems. The acquired imaging data often include features arising from both undesirable system vibrations and drift, as well as the scientifically relevant deformations occurring in the battery sample during cell operation. For meaningful analysis, it is crucial to distinguish and separately evaluate these two factors. To address these challenges, we employ a suite of advanced image-processing techniques. These include fast Fourier transform analysis in the frequency domain, power spectrum-based assessments for image quality, as well as rigid and non-rigid image-registration methods. These techniques allow us to identify and exclude blurred images, correct for displacements caused by motor vibrations and sample holder drift and, thus, prevent unwanted image artifacts from affecting subsequent analyses and interpretations. Additionally, we apply optical flow analysis to track the dynamic deformation of battery electrode materials during electrochemical cycling. This enables us to observe and quantify the evolving mechanical responses of the electrodes, offering deeper insights into battery degradation. Together, these methods ensure more accurate image analysis and enhance our understanding of the chemomechanical interplay in battery performance and longevity.

Sun, Tianxiao↗

Ion soft landing: A unique tool for understanding electrochemical processes

Ion soft landing (SL) is a preparative mass spectrometry approach that enables deposition of mass- and charge-selected gaseous ions onto surfaces with controlled kinetic energy. The unique capabilities of SL provide an opportunity to populate electrode–electrolyte interfaces (EEIs) with well-defined intact electroactive ions of known composition, thereby facilitating the characterization of their intrinsic electrochemical properties. Here, in this perspective, we describe the SL technique and discuss how it may be used to study the effect of the charge state, stoichiometry, and composition of large redox active molecules and clusters on their electron transfer kinetics. SL has enabled the characterization of redox-active species that cannot be purified and examined using conventional bulk-phase separation and deposition approaches. Furthermore, precise control over the deposition process provides an opportunity to prepare and characterize well-defined EEIs relevant to energy storage and conversion, catalysis, and sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗