Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Polymorphism and thermodynamic ground state of silver fulminate studied from van der Waals density functional calculations

Silver fulminate (AgCNO) is a primary explosive, which exists in two polymorphic phases, namely, orthorhombic (Cmcm) and trigonal (R3{sup ¯}) forms at ambient conditions. In the present study, we have investigated the effect of pressure and temperature on relative phase stability of the polymorphs using planewave pseudopotential approaches based on Density Functional Theory (DFT). van der Waals interactions play a significant role in predicting the phase stability and they can be effectively captured by semi-empirical dispersion correction methods in contrast to standard DFT functionals. Based on our total energy calculations using DFT-D2 method, the Cmcm structure is found to be the preferred thermodynamic equilibrium phase under studied pressure and temperature range. Hitherto Cmcm and R3{sup ¯} phases denoted as α- and β-forms of AgCNO, respectively. Also a pressure induced polymorphic phase transition is seen using DFT functionals and the same was not observed with DFT-D2 method. The equation of state and compressibility of both polymorphic phases were investigated. Electronic structure and optical properties were calculated using full potential linearized augmented plane wave method within the Tran-Blaha modified Becke-Johnson potential. The calculated electronic structure shows that α, β phases are indirect bandgap insulators with a bandgap values of 3.51 and 4.43 eV, respectively. The nature of chemical bonding is analyzed through the charge density plots and partial density of states. Optical anisotropy, electric-dipole transitions, and photo sensitivity to light of the polymorphs are analyzed from the calculated optical spectra. Overall, the present study provides an early indication to experimentalists to avoid the formation of unstable β-form of AgCNO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and UV spectrum of hexachloroplatinate dianions in vacuo

We present a joint experimental and theoretical study of the electronic spectrum of hexachloroplatinate dianion. We have measured electronic photodissociation and photodetachment spectra of mass-selected PtCl{sub 6}{sup 2−} ions in vacuo and compare these with calculated band positions from time-dependent density functional theory and from relativistic calculations. Excitation of an electronic transition of the dianion leads to resonant enhancement of the photodetachment cross section superimposed on direct detachment. Photoexcitation results in loss of Cl{sup −} and Cl{sup 0}, depending on photon energy. The photofragmentation spectrum for formation of the PtCl{sub 4}{sup −} fragment ion mirrors the UV/vis absorption spectrum of PtCl{sub 6}{sup 2−} in solution with a small solvatochromic shift.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic states of lithium passivated germanium nanowires: An ab-initio study

A study of the electronic and structural properties of germanium nanowires (GeNWs) was performed using the ab-initio Density Functional Theory within the generalized gradient approximation where electron-ion interactions are described by ultrasoft pseudopotentials. To study the effects of the lithium in the surface of the GeNWs we compare the electronic band structures of Hydrogen passivated GeNWs with those of partial and totally Li passivated GeNWs. The nanowires were constructed in the [001], [111] and [110] directions, using the supercell model to create different wire diameters. The results show that in the case of partial Li passivation there are localized orbitals near the valence band maximum, which would create a p-doped-kind of state. The total Li passivation created metallic states for all the wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing atomic-scale symmetry breaking by rotationally invariant machine learning of multidimensional electron scattering

Abstract The 4D scanning transmission electron microscopy (STEM) method maps the structure and functionality of solids on the atomic scale, yielding information-rich data sets describing the interatomic electric and magnetic fields, structural and electronic order parameters, and other symmetry breaking distortions. A critical bottleneck is the dearth of analytical tools that can reduce complex 4D-STEM data to physically relevant descriptors. We propose an approach for the systematic exploration of 4D-STEM data using rotationally invariant variational autoencoders (rrVAE), which disentangle the general rotation of the object from other latent representations. The implementation of purely rotational rrVAE is discussed as are applications to simulated data for graphene and zincblende structures. The rrVAE analysis of experimental 4D-STEM data of defects in graphene is illustrated and compared to the classical center-of-mass analysis. This approach is universal for probing symmetry-breaking phenomena in complex systems and can be implemented for a broad range of diffraction methods.

36 MATERIALS SCIENCE↗

Specific Features of the Electron Structure of ZnTPP Aggregated Forms: Data of Optical Measurements and Quantum-Chemical Calculations

Zinc tetraphenylporphyrin (ZnTPP) films and ZnTPP-based composites are promising materials of organic photonics. Porphyrins are inclined towards self-assembly and the formation of molecular ensembles or differently structured aggregates. The energies of the formation of aggregates and ordered structures and modifications of their electron structures compared to that of a free ZnTPP molecule have not been adequately explored. In the study, the first comprehensive investigation of the structure, absorption and luminescence spectra, and photoluminescence kinetics of structurally perfect ZnTPP thin films produced under quasi-equilibrium conditions in vacuum is conducted. It is shown that changes in the absorption spectra and the red shift of the luminescence spectra of films by 0.15 eV from the spectra observed for ZnTPP solutions in toluene can be interpreted as a result of the formation of an ordered thin-film structure through the dimerization of porphyrin planar molecules under nearly equilibrium conditions. The optimal geometric structure, the energy of the ground state, and the electronic spectrum of excitations of the dimerized (ZnTPP){sub 2} state are calculated in the context of density functional theory and time-dependent density functional theory. The energy gain on the formation of a dimer of symmetry C{sub i} compared to two separate molecules is 0.23 eV per dimer; the HOMO–LUMO gap for the dimer is decreased by 70 meV. The radiative emission time in the ordered solid phase is an order of magnitude shorter than that in the solution in toluene and corresponds to 277 ps, which is typical of J aggregates of porphyrins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational study on structural modification of single-walled carbon nanotubes by electron irradiation

Molecular dynamics simulation is carried out to investigate structural modifications of single-walled carbon nanotubes by electron irradiation. Electron irradiation effects are introduced by the Monte Carlo method using an elastic collision cross section. We demonstrate the applicability of the method to the analysis of structural modifications with electron beam such as cutting, shrinking, and bending. The behavior of the carbon atoms in the nanotube during the structural modification is revealed. The simulation results also show the variation of the mechanical properties of carbon nanotubes by electron irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of composition and structure on the properties of metal/multifunctional ceramic interfaces

The formation of intermetallic secondary phases, such as Pt{sub 3}Pb, has been observed experimentally at PbTiO{sub 3}/Pt and Pb(Zr,Ti)O{sub 3}/Pt, or PZT/Pt, interfaces. Density functional theory calculations are used here to calculate the work of adhesion of these interfacial systems with and without the secondary intermetallic phase. The charge density maps of the interfaces reveal the electronic interactions at the interface and the impact of the secondary phase. In addition, Bader charge analysis provides a quantitative assessment of electron transfer from the perovskites to the Pt. Analysis of the band diagrams indicates an increase of the potential barrier associated with electron transfer due to the formation of the Pt{sub 3}Pb at PZT/Pt interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of diagonal G and subspace W approximations within fully self-consistent GW calculations for bulk semiconducting systems

Fully self-consistent GW (sc-GW) methods are now available to evaluate quasiparticle and spectral properties of various molecular and bulk systems. However, such techniques based on the full matrix of G and W are computationally demanding. Additionally, the routinely used single-shot GW approximation (G 0 W 0 ) has an undesirable dependency on the choice of initial exchange-correlation functional. In the literature, many so-called self-consistent GW methods are based on diagonal approximation of G and low-ranking approximation of W. It is thus worth checking how good such approximations are in comparison with the full matrix method. In this work, we consider AlAs, AlP, GaP, and ZnS as the prototype systems to perform sc-GW calculations by expressing the full G matrix using a plane-wave basis set. We compared our sc-GW results with the diagonal G and subspace W approximated sc-GW results (sc-GW-diagG and sc-GW-subW methods). In the sc-GW-diagG method, interacting G is expanded in the eigenvectors of noninteracting G such that only diagonal elements are retained, whereas the number of eigenmodes is truncated in sc-GW-subW calculations. A systematic analysis of the results obtained from the above techniques is presented. The differences in the quasiparticle band gap between the approximated and the full matrix sc-GW approaches are mostly less than 1.7%, which validates such widely adopted approximations, and also shows how such low-ranking approximation can be used to include higher-order terms such as the vertex correction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DFT study of the effect of fluorine atoms on the crystal structure and semiconducting properties of poly(arylene-ethynylene) derivatives

The effect of fluorine substitution on the molecular structure, crystal packing, and n-type semiconducting properties of a set of poly(arylene-ethynylene) polymers based on alternating thiadiazole and phenyl units linked through ethynylene groups has been studied by means of Density Functional Theory. As a result, an enlargement in the interplanar distance between cofacial polymer chains, as well as a decrease of the electronic coupling and electron mobility is predicted. On the other hand, fluorination could facilitate electron injection into the material. A polymer containing both alkoxy pendant chains and fluorine atoms is proposed as a compromise solution between efficiency of electron injection and charge transport within the material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructurally Strained Pyrochlore–Perovskite Biphasic Electrocatalysts for the Oxygen Evolution Reaction

Efficiency of water splitting for hydrogen production is often limited by the sluggish kinetics of multiple electronic transfers required in the heterogeneous oxygen evolution reaction (OER). Catalyst design for reducing the high OER overpotential remains a major scientific challenge. Lattice-strain engineering, a method for tuning the electronic structure and surface geometric configuration of active sites, may greatly affect the interaction between adsorbates and catalytic surfaces for high activity and stability. Here, in this study, we present the synthesis of biphasic oxides of YPrSrRuMnO x , which consists of distinct phases of Y 2 Ru 2 O 7 pyrochlore and (Pr 0.7 Sr 0.3 )MnO 3 perovskite, and the development of a suitable analytical approach to study the strain–catalytic property relationship. Linear sweep voltammetry results reveal that the biphasic oxide exhibits approximately 3.1 times greater mass activity and 2.4 times larger turnover frequency (TOF) than single-phase Y 2 Ru 2 O 7 in the 0.1 M HClO 4 electrolyte. The biphasic catalyst is also about 3 times more stable than the single-phase oxide under acidic conditions. X-ray photoelectron spectroscopy, nitrogen isotherm, and electrochemical surface area analyses indicate that the oxidation state, specific surface area, and electrochemical surface area do not cause enough difference in the observed enhancement of OER performance. We examined the effects of microstrain on electrocatalysis, originating from lattice mismatch between different phases, using three different structural models. Specifically, we compared the Williamson–Hall method, standard stress–strain analysis, and Rietveld refinement in analyzing the structure–property relationship. Strain mapping using geometric phase analysis (GPA) further revealed significant microstrain and lattice dislocations localized near phase boundaries in the biphasic oxide, in contrast to the uniform strain in single-phase materials. The results reveal that the increased microstrain correlates well with the improved OER performance, as the biphasic oxide catalyst exhibits 2–3 times greater microstrain than Y 2 Ru 2 O 7 pyrochlore.

electrocatalysts↗

Tunable gaps and enhanced mobilities in strain-engineered silicane

The recent demonstration of single-atom thick, sp{sup 3}-hybridized group 14 analogues of graphene enables the creation of materials with electronic structures that are manipulated by the nature of the covalently bound substituents above and below the sheet. These analogues can be electronically derived from isolated (111) layers of the bulk diamond lattice. Here, we perform systematic Density Functional Theory calculations to understand how the band dispersions, effective masses, and band gaps change as the bulk silicon (111) layers are continuously separated from each other until they are electronically isolated, and then passivated with hydrogen. High-level calculations based on HSE06 hybrid functionals were performed on each endpoint to compare directly with experimental values. We find that the change in the electronic structure due to variations in the Si-H bond length, Si-Si-Si bond angle, and most significantly the Si-Si bond length can tune the nature of the band gap from indirect to direct with dramatic effects on the transport properties. First-principles calculations of the phonon-limited electron mobility predict a value of 464 cm{sup 2}/Vs for relaxed indirect band gap Si-H monolayers at room temperature. However, for 1.6% tensile strain, the band gap becomes direct, which increases the mobility significantly (8 551 cm{sup 2}/Vs at 4% tensile strain). In total, this analysis of Si-based monolayers suggests that strain can change the nature of the band gap from indirect to direct and increase the electron mobility more than 18-fold.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic Structure and Cohesion Energy of ZnSe and CdSe Clusters

The first-principle calculations of the atomic and electronic structures of fullerene-like Zn{sub n}Se{sub n} and Cd{sub n}Se{sub n} have been carried out for n = 12, 36, 48, and 60. A model of two-layer fullerene-like (ZnSe){sub 60} and (CdSe){sub 60} clusters with mixed sp{sup 2}/sp{sup 3} bonds has been built for the first time. Ab initio calculations are performed in terms of the electron density functional and the hybrid B3LYP functional theory. The stability and the energy gap width of the clusters are estimated in the dependence on the number of atoms in a cluster and its geometry. It is shown that the relaxation of 1.7–1.8-nm two-layer (ZnSe){sub 60} and (CdSe){sub 60} clusters with mixed sp{sup 2}/sp{sup 3} bonds is accompanied by splitting out of the external layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of α - RuCl 3 by fixed-node and fixed-phase diffusion Monte Carlo methods

Layered material α-RuCl 3 has caught wide attention due to its possible realization of Kitaev's spin liquid and its electronic structure that involves the interplay of electron-electron correlations and spin-orbit effects. Several DFT+U studies have suggested that both electron-electron correlations and spin-orbit effects are crucial for accurately describing the band gap. This work studies the importance of these two effects using fixed-node and fixed-phase diffusion Monte Carlo calculations both in spin-averaged and explicit spin-orbit formalisms. In the latter, the Slater-Jastrow trial function is constructed from two-component spin orbitals using our recent quantum Monte Carlo (QMC) developments and thoroughly tested effective core potentials. Our results show that the gap in the ideal crystal is already accurately described by the spin-averaged case, with the dominant role being played by the magnetic ground state with significant exchange and electron correlation effects. We find qualitative agreement between hybrid DFT, DFT+U, and QMC. In addition, QMC results agree very well with available experiments, and we identify the values of exact Fock exchange mixing that provide comparable gaps. Explicit spin-orbit QMC calculations reveal that the effect of spin-orbit coupling on the gap is minor, of the order of 0.2 eV, which corresponds to the strength of the spin orbit of the Ru atom.

36 MATERIALS SCIENCE↗

Elastic and electronic properties of the Ti{sub 5}X{sub 3} (X=Si, Ge, Sn, Pb) compounds from first-principles calculations

The structural stabilities, elastic and electronic properties of Ti{sub 5}X{sub 3} (X=Si, Ge, Sn, Pb) compounds with D8{sub 8} structure have been systematically investigated within the frame work of density functional theory. With increase of atomic number of the element X, the calculated lattice constants of Ti{sub 5}X{sub 3} compounds are found to increase, while stabilities of these compounds decrease because the formation enthalpies increase. Moreover, with exception of C{sub 12}, the calculated elastic constants C{sub ij} are reduced with increase of atomic number of element X, the bulk, shear, Young's modulus and Debye temperature are also lowered, while Poisson's ratio is larger, and the ductility is slightly improved. The elastic anisotropies were further studied, especially the 3D direction dependence of these elastic modulus was visually described. The density of states and charge density distribution reveal bonding feature of Ti{sub 5}X{sub 3}. Especially, the X-X and Ti-X covalent bonding strength is found to decrease with increase of atomic number of element X. - Graphical abstract: The charge density contour plots on the (0 0 0 1) plane for Ti{sub 5}Si{sub 3} (a), Ti{sub 5}Ge{sub 3} (b), Ti{sub 5}Sn{sub 3} (c) and Ti{sub 5}Pb{sub 3} (d). Highlights: Black-Right-Pointing-Pointer The elastic constants except C{sub 12} were lowered with increase of atomic number of X. Black-Right-Pointing-Pointer The bulk and shear modulus as well as Young's modulus was also decreased. Black-Right-Pointing-Pointer The elastic anisotropies of Ti{sub 5}X{sub 3} were further studied visually. Black-Right-Pointing-Pointer The X-X and Ti-X covalent bonding strength was lowered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Comparative Ab Initio Study of the Primary Hydration and Proton Dissociation of Various Imide and Sulfonic Acid Ionomers

We compare the role of neighboring group substitutions on proton dissociation of hydrated acidic moieties suitable for proton exchange membranes through electronic structure calculations. Three pairs of ionomers containing similar electron withdrawing groups within the pair were chosen for the study: two fully fluorinated sulfonyl imides (CF3SO2NHSO2CF3 and CF3CF2SO2NHSO2CF3), two partially fluorinated sulfonyl imides (CH3SO2NHSO2CF3 and C6H5SO2NHSO2CF2CF3), and two aromatic sulfonic acid based material s (CH3C6H4SO3H and CH3 OC6 - H3OCH3C6H4SO3H). Fully optimized counterpoise (CP) corrected geometries were obtained for each ionomer fragment with the inclusion of water molecules at the B3LYP/6-311G** level of density functional theory. Spontaneous proton dissociation was observed upon addition of three water molecules in each system, and the transition to a solvent-separated ion pair occurred when four water molecules were introduced. No considerable quantitative or qualitative differences in proton dissociation, hydrogen bond networks formed, or water binding energies were found between systems containing similar electron withdrawing groups. Each of the sulfonyl imide ionomers exhibited qualitatively similar results regarding proton dissociation and separation. The fully fluorinated sulfonyl imides, however, showed a greater propensity to exist in dissociated and ion-pair separated states at low degrees of hydration than the partially fluorinated sulfonyl imides. This effect is due to the additional electron withdrawing groups providing charge stabilization as the dissociated proton migrates away from the imide anion.

30 DIRECT ENERGY CONVERSION↗

Constrained nuclear–electronic orbital method for periodic density functional theory: Application to H 2 chemisorption on Si(001) surfaces

The nuclear–electronic orbital (NEO) method provides a powerful computational framework for incorporating nuclear quantum effects (NQE) in electronic structure calculations beyond the Born–Oppenheimer approximation. By incorporating additional constraints to the position operator on quantum particles like protons, the NEO method enables calculation of effective potential that accounts for NQE. Here, in this work, we present a new constrained NEO (cNEO) formulation for density functional theory (cNEO-DFT) calculations in the context of extended periodic systems. Using the nudged elastic band method, we discuss an application of the cNEO-DFT approach to studying the adsorption of a hydrogen molecule on the Si(001) surfaces. The calculation shows how NQE impacts the reaction energetics. The proton density changes are computed along the reaction pathways. This work demonstrates the capability of the new cNEO-DFT method to study a wide range of chemical processes, such as surface reactions where the quantum nature of light atoms like protons is non-negligible.

Chemical processes↗

Controlling orbital-selective Kondo effects in a single molecule through coordination chemistry

Iron(II) phthalocyanine (FePc) molecule causes novel Kondo effects derived from the unique electronic structure of multi-spins and multi-orbitals when attached to Au(111). Two unpaired electrons in the d{sub z}{sup 2} and the degenerate dπ orbitals are screened stepwise, resulting in spin and spin+orbital Kondo effects, respectively. We investigated the impact on the Kondo effects of the coordination of CO and NO molecules to the Fe{sup 2+} ion as chemical stimuli by using scanning tunneling microscopy (STM) and density functional theory calculations. The impacts of the two diatomic molecules are different from each other as a result of the different electronic configurations. The coordination of CO converts the spin state from triplet to singlet, and then the Kondo effects completely disappear. In contrast, an unpaired electron survives in the molecular orbital composed of Fe d{sub z}{sup 2} and NO 5σ and 2π* orbitals for the coordination of NO, causing a sharp Kondo resonance. The isotropic magnetic response of the peak indicates the origin is the spin Kondo effect. The diatomic molecules attached to the Fe{sup 2+} ion were easily detached by applying a pulsed voltage at the STM junction. These results demonstrate that the single molecule chemistry enables us to switch and control the spin and the many-body quantum states reversibly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental gaps with approximate density functionals: The derivative discontinuity revealed from ensemble considerations

The fundamental gap is a central quantity in the electronic structure of matter. Unfortunately, the fundamental gap is not generally equal to the Kohn-Sham gap of density functional theory (DFT), even in principle. The two gaps differ precisely by the derivative discontinuity, namely, an abrupt change in slope of the exchange-correlation energy as a function of electron number, expected across an integer-electron point. Popular approximate functionals are thought to be devoid of a derivative discontinuity, strongly compromising their performance for prediction of spectroscopic properties. Here we show that, in fact, all exchange-correlation functionals possess a derivative discontinuity, which arises naturally from the application of ensemble considerations within DFT, without any empiricism. This derivative discontinuity can be expressed in closed form using only quantities obtained in the course of a standard DFT calculation of the neutral system. For small, finite systems, addition of this derivative discontinuity indeed results in a greatly improved prediction for the fundamental gap, even when based on the most simple approximate exchange-correlation density functional – the local density approximation (LDA). For solids, the same scheme is exact in principle, but when applied to LDA it results in a vanishing derivative discontinuity correction. This failure is shown to be directly related to the failure of LDA in predicting fundamental gaps from total energy differences in extended systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗