Search NASA⌕ Search

SEARCH · Search NASA

Results for “flow instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Analysis of Reverse Flow Restriction Device to Prevent Dryout Fuel Damage during BWR Instability

Boiling Water Reactors (BWRs) are subjected to instabilities due to thermal hydraulics feedback or coupled Neutronics-thermal hydraulics feedback. Feedback is affected by many reactor parameters that could destabilize the core such as distribution of pressure drop across the core, axial power shape, subcooling level at the core inlet, radial power peaking factor, reactivity coefficients, and others. There are three common modes of instability in BWRs: single channel instability, core-wide instability, and regional instability. Each instability mode could damage the fuel if the power oscillations are left without an intervention like reactor scram. However, the instability problem becomes more dangerous if the automatic reactor scram is lost, like in Anticipated Transient without Scram (ATWS) accidents. A reverse flow restriction device (RFRD) would mitigate this problem. Core simulation using TRACE/PARCS code has been used to examine the potential effect of restricting the flow in the downward direction on mitigation of the power and flow oscillations to increase the safety of BWRs. The presented results demonstrate the ability of the device on limiting flow oscillation amplitude in the one bundle where it is used, on an adjacent bundle without it and reducing the power peak when the flow is low and power is high during BWR power oscillations. This exercise demonstrates the potential of previously described hardware device on preventing clad temperature excursion to keep the fuel safe from dryout damage and provide encouraging results ahead of the planned more detailed investigation where the device is to be used in more bundles up to full core. In the future work it is planned to examine the effect of device installed in a fraction of the bundles on the flow rate in other bundles. Also, the effect on the characteristics of dryout and rewetting and the resulting temperature excursions with and without the device will be given special attention. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Shock tube experiments on the three-layer Richtmyer–Meshkov instability

Here, a vertical shock tube is used for experiments on the three-layer Richtmyer–Meshkov instability. Two closely spaced membrane-less interfaces are formed by the flow of two different sects of three gases: one with air above CO 2 above SF 6 and the other with helium above air above SF 6 . The lightest of the three gases enters the shock tube at the top of the driven section and flows downward. Conversely, the heaviest gas enters at the bottom of the shock tube and flows upward while the intermediate density gas enters at the middle through porous plates. All three gases are allowed to escape through holes at the layer location, leaving an approximately 30-mm layer of intermediate-density gas suspended between the lightest gas from above and the heaviest gas from below. A single-mode, two-dimensional initial perturbation is then imposed on the lower interface by oscillating the shock tube in the horizontal direction. The flow is visualized by seeding the intermediate gas with particles and illuminating it with a pulsed laser. Image sequences are then captured using high-speed video cameras. Perturbation amplitude measurements are made from the three-layer system and compared with measurements from 2, two-layer systems. It is observed that the presence of the upper, initially flat interface produces a decrease in growth of instability amplitude in the nonlinear phase over an equivalent single-interface configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DUST CONCENTRATION AT THE BOUNDARY BETWEEN STEADY SUPER/SUB-KEPLERIAN FLOW CREATED BY INHOMOGENEOUS GROWTH OF MAGNETO-ROTATIONAL INSTABILITY

How planetesimals are created from tiny dust particles in a proto-planetary disk before the dust particles spiral to the central star is one of the most challenging problems in the theory of planetary system formation. In our previous paper, we have shown that a steady angular velocity profile that consists of both super- and sub-Keplerian regions is created in the disk through non-uniform excitation of magneto-rotational instability (MRI). Such non-uniform MRI excitation is reasonably expected in a part of disks with relatively low ionization degree. In this paper, we show through three-dimensional resistive MHD simulations with test particles that this radial structure of the angular velocity indeed leads to the prevention of spiral-in of dust particles and furthermore to their accumulation at the boundary of super-Keplerian and sub-Keplerian regions. Treating dust particles as test particles, their motions under the influence of the non-uniform MRI through gas drag are simulated. In the most favorable cases (meter-size dust particles in the disk region with a relatively large fraction of MRI-stable region), we found that the dust concentration is peaked around the super/sub-Keplerian flow boundary and the peak dust density is 10,000 times as high as the initial value. The peak density is high enough for the subsequent gravitational instability to set in, suggesting a possible route to planetesimal formation via non-uniformly excited MRI in weakly ionized regions of a disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Convective thermocapillary instabilities in liquid bridges

A steady shear flow is generated in an axisymmetric liquid bridge surrounded by a passive gas through the imposition of a temperature gradient along the bridge and the driving of the motion by thermocapillarity. This dynamic state is susceptible to convective instabilities, which can lead to propagating hydrothermal waves that feed on the underlying temperature gradients. The convective instabilities of axisymmetric return flow are presently given as functions of the liquid's Prandtl number and the surface Biot number of the interface.

Xu, J.-J.↗

Numerical investigation of the origin of vortex asymmetry

The flow about a slender body of revolution placed at incidence to an oncoming stream is numerically investigated for angles of attack ranging from 20 to 80 degrees and a Reynolds number of 200,000, based on freestream conditions and maximum body diameter. Navier-Stokes computations are applied to investigate the phenomena governing the onset of vortex asymmetry. Time-accurate solutions are given for an ogive-cylinder body with and without a space-fixed time-invariant disturbance added near the tip. At a 40-degree angle of attack the flow is found to be steady but becomes highly asymmetric when the disturbance is added. The level of asymmetry is dependent upon the size and location of the disturbance. It is suggested that the origin of the asymmetry is a convective-type instability of the originally symmetric flow. For higher angles of attack (60 and 80 degrees) the flow around the cylindrical part becomes unsteady, and vortex shedding is observed. It is suggested that the origin of flow unsteadiness and vortex shedding in the wake is an absolute-type instability of the originally steady flow.

Degani, David↗

Overstability of acoustic waves in strongly magnetized anisotropic magnetohydrodynamic shear flows

We present a linear stability analysis of the perturbation modes in anisotropic magnetohydrodynamic (MHD) flows with velocity shear and strong magnetic field. Collisionless or weakly collisional plasma is described within the 16-momentum MHD fluid closure model that takes into account not only the effect of pressure anisotropy but also the effect of anisotropic heat fluxes. In this model, the low frequency acoustic wave is revealed into a standard acoustic mode and higher frequency fast thermo-acoustic and lower frequency slow thermo-acoustic waves. It is shown that thermo-acoustic waves become unstable and grow exponentially when the heat flux parameter exceeds some critical value. It seems that velocity shear makes thermo-acoustic waves overstable even at subcritical heat flux parameters. Thus, when the effect of heat fluxes is not profound acoustic waves will grow due to the velocity shear, while at supercritical heat fluxes the flow reveals compressible thermal instability. Anisotropic thermal instability should be also important in astrophysical environments, where it will limit the maximal value of magnetic field that a low density ionized anisotropic flow can sustain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrodynamical instabilities in the superfluid interior of neutron stars with background flows between the components

The interiors of mature neutron stars are expected to host superfluid neutrons that can flow relative to the normal component tracked by electromagnetic emission. Hence, analogously to the hydrodynamic description of terrestrial superfluids like 4 He, the system is best described by means of a two-fluid model. In this work, we study wave propagation in the crust and core of a neutron star by conducting a local plane-wave analysis of the two-fluid hydrodynamic equations for a homogeneous macroscopic element of nuclear matter. We explicitly account for a background flow between the two components (as would be expected in the presence of pinning of superfluid vortex lines) and the entrainment coupling, and we consider both standard (Hall-Vinen) and isotropic (Gorter-Mellink) forms of the mutual friction. We find that for standard mutual friction there are families of unstable inertial and sound waves both in the case of a counter-flow along the superfluid vortex axis and for counterflow perpendicular to the vortex axis and find that entrainment leads to a quantitative difference between instabilities in the crust and core of the star. For isotropic mutual friction, we find no unstable branches of the dispersion law and speculate that instabilities in a straight vortex array may be linked to glitching behavior, which then ceases until the turbulence has decayed.

79 ASTRONOMY AND ASTROPHYSICS↗

Report of visit to LLNL 26 June to 10 July 2010

On this visit my principal activity was focused on the capsule and in particular to ascertain whether the heat-flow-driven electrothermal (ET) instability would occur in NIF indirect-drive experiments. Filamentary structures, assumed to be associated with the ET instability, have been observed years ago in the coronal plasma of direct-drive and more recently by proton probing of targets irradiated directly with an intense short-pulse (~1ps.) laser. A different proton probing diagnostic based on a subsidiary exploding pusher source has also shown filamentary structures in direct drive experiments at 10 13 – 10 15 W cm -2 intensity, but with only 47μm resolution. Recently measurements have been made on indirectly driven capsules on OMEGA and no filamentary structures were observed. During my visit 1-D numerical simulations from HYDRA were studied. The method was to employ Lagrangian plots of density, temperature etc. for many cells and to test whether the two conditions necessary for growth of the ET instability would simultaneously be satisfied. These conditions are that the electron temperature should be less than a critical temperature and that the electron heat flow should be greater than 0.02 times the free-streaming value. We found that for all of the 16 zones considered none should be unstable, though in some cases it could be marginal. A further development of the heat-flux condition is contained in Appendices A and B, giving a lower threshold, but still indicating that the NIF indirect-drive will be stable to ET. Other subjects briefly studied included the validity of the non-local model of transport in the hohlraum gas; the inclusion of magnetic fields in HYDRA; the electric field in capsules and shocks; the proposed theta pinch for the LIFE project; the importance of ion viscosity, thermal conduction, and Maxwellisation at the final implosion; the question of an electric field and hence a return current generated in radiation transport due to photon momentum deposition; the physical appropriateness of numerical viscosity; and the magnetic field generation on the gold wall.

42 ENGINEERING↗

SELF-DESTRUCTING SPIRAL WAVES: GLOBAL SIMULATIONS OF A SPIRAL-WAVE INSTABILITY IN ACCRETION DISKS

We present results from a suite of three-dimensional global hydrodynamic simulations that shows that spiral density waves propagating in circumstellar disks are unstable to the growth of a parametric instability that leads to break down of the flow into turbulence. This spiral wave instability (SWI) arises from a resonant interaction between pairs of inertial waves, or inertial-gravity waves, and the background spiral wave. The development of the instability in the linear regime involves the growth of a broad spectrum of inertial modes, with growth rates on the order of the orbital time, and results in a nonlinear saturated state in which turbulent velocity perturbations are of a similar magnitude to those induced by the spiral wave. The turbulence induces angular momentum transport and vertical mixing at a rate that depends locally on the amplitude of the spiral wave (we obtain a stress parameter α ∼ 5 × 10{sup −4} in our reference model). The instability is found to operate in a wide range of disk models, including those with isothermal or adiabatic equations of state, and in viscous disks where the dimensionless kinematic viscosity ν ≤ 10{sup −5}. This robustness suggests that the instability will have applications to a broad range of astrophysical disk-related phenomena, including those in close binary systems, planets embedded in protoplanetary disks (including Jupiter in our own solar system) and FU Orionis outburst models. Further work is required to determine the nature of the instability and to evaluate its observational consequences in physically more complete disk models than we have considered in this paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Studies of turbulent shear flows and their control

The intent of the original proposal and the work carried out under the grant was to explore the instabilities of turbulent free shear flows of an incompressible fluid. The purpose for doing so was that coherent instabilities are susceptible to control via upstream forcing and because at sufficient finite amplitudes, the coherent modes enter into nonlinear interactions with the mean motion and thus, through such nonlinear interactions, the control of mixing and of mean flow spreading can be effected through the control of the coherent structures.

Liu, Joseph T. C.↗

Nonlinear Transient Growth and Boundary Layer Transition

Parabolized stability equations (PSE) are used in a variational approach to study the optimal, non-modal disturbance growth in a Mach 3 at plate boundary layer and a Mach 6 circular cone boundary layer. As noted in previous works, the optimal initial disturbances correspond to steady counter-rotating streamwise vortices, which subsequently lead to the formation of streamwise-elongated structures, i.e., streaks, via a lift-up effect. The nonlinear evolution of the linearly optimal stationary perturbations is computed using the nonlinear plane-marching PSE for stationary perturbations. A fully implicit marching technique is used to facilitate the computation of nonlinear streaks with large amplitudes. To assess the effect of the finite-amplitude streaks on transition, the linear form of plane- marching PSE is used to investigate the instability of the boundary layer flow modified by spanwise periodic streaks. The onset of bypass transition is estimated by using an N- factor criterion based on the amplification of the streak instabilities. Results show that, for both flow configurations of interest, streaks of sufficiently large amplitude can lead to significantly earlier onset of transition than that in an unperturbed boundary layer without any streaks.

Laminar turbulent transition↗

Predicted and experimental steady and unsteady transonic flows about a biconvex airfoil

Results of computer code time dependent solutions of the two dimensional compressible Navier-Stokes equations and the results of independent experiments are compared to verify the Mach number range for instabilities in the transonic flow field about a 14 percent thick biconvex airfoil at an angle of attack of 0 deg and a Reynolds number of 7 million. The experiments were conducted in a transonic, slotted wall wind tunnel. The computer code included an algebraic eddy viscosity turbulence model developed for steady flows, and all computations were made using free flight boundary conditions. All of the features documented experimentally for both steady and unsteady flows were predicted qualitatively; even with the above simplifications, the predictions were, on the whole, in good quantitative agreement with experiment. In particular, predicted time histories of shock wave position, surface pressures, lift, and pitching moment were found to be in very good agreement with experiment for an unsteady flow. Depending upon the free stream Mach number for steady flows, the surface pressure downstream of the shock wave or the shock wave location was not well predicted.

Levy, L. L., Jr.↗

Experimental Studies of the Interaction Between a Parallel Shear Flow and a Directionally-Solidifying Front

It has long been recognized that flow in the melt can have a profound influence on the dynamics of a solidifying interface and hence the quality of the solid material. In particular, flow affects the heat and mass transfer, and causes spatial and temporal variations in the flow and melt composition. This results in a crystal with nonuniform physical properties. Flow can be generated by buoyancy, expansion or contraction upon phase change, and thermo-soluto capillary effects. In general, these flows can not be avoided and can have an adverse effect on the stability of the crystal structures. This motivates crystal growth experiments in a microgravity environment, where buoyancy-driven convection is significantly suppressed. However, transient accelerations (g-jitter) caused by the acceleration of the spacecraft can affect the melt, while convection generated from the effects other than buoyancy remain important. Rather than bemoan the presence of convection as a source of interfacial instability, Hurle in the 1960s suggested that flow in the melt, either forced or natural convection, might be used to stabilize the interface. Delves considered the imposition of both a parabolic velocity profile and a Blasius boundary layer flow over the interface. He concluded that fast stirring could stabilize the interface to perturbations whose wave vector is in the direction of the fluid velocity. Forth and Wheeler considered the effect of the asymptotic suction boundary layer profile. They showed that the effect of the shear flow was to generate travelling waves parallel to the flow with a speed proportional to the Reynolds number. There have been few quantitative, experimental works reporting on the coupling effect of fluid flow and morphological instabilities. Huang studied plane Couette flow over cells and dendrites. It was found that this flow could greatly enhance the planar stability and even induce the cell-planar transition. A rotating impeller was buried inside the sample cell, driven by an outside rotating magnet, in order to generate the flow. However, it appears that this was not a well-controlled flow and may also have been unsteady. In the present experimental study, we want to study how a forced parallel shear flow in a Hele-Shaw cell interacts with the directionally solidifying crystal interface. The comparison of experimental data show that the parallel shear flow in a Hele-Shaw cell has a strong stabilizing effect on the planar interface by damping the existing initial perturbations. The flow also shows a stabilizing effect on the cellular interface by slightly reducing the exponential growth rate of cells. The left-right symmetry of cells is broken by the flow with cells tilting toward the incoming flow direction. The tilting angle increases with the velocity ratio. The experimental results are explained through the parallel flow effect on lateral solute transport. The phenomenon of cells tilting against the flow is consistent with the numerical result of Dantzig and Chao.

Zhang, Meng↗

Numerical experiments on subcritical transition mechanisms

A spectral algorithm for simulating three-dimensional, incompressible, parallel shear flows is described. It applies to the channel, to the parallel boundary layer, and to other shear flows with one wall-bounded and two periodic directions. Simulations performed for the channel identify the one nonlinear interaction which is crucial to the secondary instability. Moreover, it is shown that subharmonic instability ensues for Reynolds numbers as low as 1500. Simulations performed for the heated water boundary layer reveal the operation of the secondary instability in this controlled flow.

Zang, T. A.↗

Microgravity Experiments and Numerical Modeling of Rotating Buoyant Convection in a Spherical Shell with Latitudinal Thermal Gradients

The results of numerical model calculations are compared with space laboratory experiments for rotating, thermally driven flow in a hemispherical shell, and various flow regimes are described. A spherically symmetric body force, analogous to gravity, is imposed in the radial direction through the use of a dielectric fluid and an electrostatic potential difference across the gap. The spherical boundaries are maintained at constant temperature profiles (with the pole and the inner sphere being the warmer surfaces), and the equatorial wall is an insulator. Typical parameter combinations result in highly nonlinear, but laminar, flow. For weak enough buoyant forcing, the flow is axisymmetric. It consists of a single meridional cell, rising in warm latitudes (in this case, near the pole) and sinking in cool latitudes, with prograde flow in the equatorial region and near the inner hemisphere for other latitudes, and retrograde motion elsewhere. For fast rotation, the first transition due to the instability of this simple flow is also axisymmetric, consisting of rings of convection in the polar region, which propagate poleward. The first nonaxisymmetric convection occurs at Rayleigh numbers which increase with rotation rate. The form of the convection near the transition also depends upon the rate of rotation. Selected flow patterns near the transition as well as those beyond it are studied numerically. For those cases where there exist laboratory experiments with which to compare, the numerical and experimental results agree very well.

Leslie, Fred W.↗

Direct Numerical Simulation of Transition in a Swept-Wing Boundary Layer

Direct numerical simulation (DNS) is performed to examine laminar to turbulent transition due to high-frequency secondary instability of stationary crossflow vortices in a subsonic swept-wing boundary layer for a realistic natural-laminar-flow airfoil configuration. The secondary instability is introduced via inflow forcing derived from a two-dimensional, partial-differential-equation based eigenvalue computation; and the mode selected for forcing corresponds to the most amplified secondary instability mode which, in this case, derives a majority of its growth from energy production mechanisms associated with the wall-normal shear of the stationary basic state. Both the growth of the secondary instability wave and the resulting onset of laminar-turbulent transition are captured within the DNS computations. The growth of the secondary instability wave in the DNS solution compares well with linear secondary instability theory when the amplitude is small; the linear growth is followed by a region of reduced growth resulting from nonlinear effects before an explosive onset of laminar breakdown to turbulence. The peak fluctuations are concentrated near the boundary layer edge during the initial stage of transition, but rapidly propagates towards the surface during the process of laminar breakdown. Both time-averaged statistics and flow visualization based on the DNS reveal a sawtooth transition pattern that is analogous to previously documented surface flow visualizations of transition due to stationary crossflow instability. The memory of the stationary crossflow vortex is found to persist through the transition zone and well beyond the location of the maximum skin friction.

Duan, Lian↗

Leading-edge transition and relaminarization phenomena on a subsonic high-lift system

Boundary-layer transition and relaminarization may have a critical effect on the flow development about multielement high-lift systems of subsonic transport aircraft with swept wings. The purpose of this paper is a study of transition phenomena in the leading-edge region of the various elements of a high-lift system. The flow phenomena studied include transition of the attachment-line flow, relaminarization, and crossflow instability. The calculations are based on pressure distributions measured in flight on the NASA Transport Systems Research Vehicle (Boeing 737-100) at a wing station where the flow approximated infinite swept wing conditions. The results indicate that significant regions of laminar flow can exist on all flap elements in flight. In future flight experiments the extent of these regions will be measured, and the transition mechanisms and the effect of laminar flow on the high-lift characteristics of the multi-element system will be further explored.

Van Dam, C. P.↗