Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Development of Fusion Neutronics Methodology, Software, and Testing Facility in FDS Team

Fusion neutronics including methodology, software, experiments, etc. is studied concerning the generation, utilizing and protection of neutrons in fusion facilities. Achievements have been made in the past decades to solve the new problems fusion neutronics. However there is still some way to go such as following. Automatic modeling method based on CAD has been developed to avoid the heavy burden of manual geometry description. The pre-processing costs much time to simplify the CAD model for converting to Constructive Solid Geometry (CSG), 2D or 3D mesh based geometry. This problem has become a new focus. Deep penetration of radiation shielding is notable problem for fusion. Adaptive variance reduction methods such as Consistent Adjoint Driven Importance Sampling (CADIS) were developed to accelerate convergence. However the gap still exists between engineering requirements and current methodology. The geometry simplification, homogenizing based tally, error in nuclear data and error propagation in coupled calculation, etc., causes considerable uncertainty, which leads to 'safety factor' applied in simulation results to achieve required safety margin. It can significantly raise the cost and even makes it impractical to initiate the fusion facilities. Uncertainty qualification, error analysis and error propagation problem should be studied. New methodology and software should be validated. For example the (n,p), (n,a), (n,t) cross section of Cu, Fe, W, Ni which is important for evaluation of material radiation damage is absent. The validation of neutronics properties of special components such as first wall, blanket and coil are needed. The D-T fusion neutron generator can directly represent the neutron environment in fusion reactors. However the neutron yield is several orders of magnitudes lower than requirements. To resolve obstacles in fusion neutronics, broad improvements of methodology, software and testing facility have been achieved by FDS Team in recent years and the main progress was introduced in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development and Verification of Enclosure Radiation Capabilities in the CHarring Ablator Response (CHAR) Code

With the recent development of multi-dimensional thermal protection system (TPS) material response codes, the capability to account for surface-to-surface radiation exchange in complex geometries is critical. This paper presents recent efforts to implement such capabilities in the CHarring Ablator Response (CHAR) code developed at NASA's Johnson Space Center. This work also describes the different numerical methods implemented in the code to compute geometric view factors for radiation problems involving multiple surfaces. Verification of the code's radiation capabilities and results of a code-to-code comparison are presented. Finally, a demonstration case of a two-dimensional ablating cavity with enclosure radiation accounting for a changing geometry is shown.

Salazar, Giovanni↗

Coherent Vibrational Wavepacket Dynamics in Platinum(II) Dimers and Their Implications

Vibrational coherence in the metal-metal-to-ligand-charge transfer (MMLCT) excited state of cyclometalated platinum dimers with a pseudo C 2 symmetry was investigated where two nearly degenerate transitions from HOMO (metal-metal σ* orbital) to higher energy ligand π* orbitals could be simultaneously induced. We observed oscillatory features in femtosecond degenerate transient absorption (TA) signals from complexes [(ppy)Pt(μ- t Bu 2 pz)] 2 (1) and anti-[(ppy)Pt(μ-pyt)] 2 (2), which are attributed to coherent nuclear motions that modulate the HOMO (antibonding σ*) energy level, and hence the energy for the MMLCT transition. The characteristics of such coherent nuclear motions, such as the oscillatory frequency and the dephasing time, differ between 1 and 2 and are explained by mainly two structural factors that could influence the vibrational coherence, the Pt-Pt distance (2.97 Å for 1 vs. 2.85 Å for 2) and molecular shape (1 in an “A” frame vs. 2 in an “H” frame). Because the electronic coupling between the two Pt atoms determines the energy splitting of the bonding σ and antibonding σ* orbital, the Pt-Pt stretching mode coupled to the MMLCT transition changes the inter Pt distance from that of the ground state. Interestingly, while 1 shows a single PtPt stretching frequency of 120 cm-1 in the MMLCT state, 2 exhibits multiple downshifted frequencies (80 and 105 cm-1) in the MMLCT state along with a shorter vibrational dephasing time than 1. Based on the ground state optimized structures and Raman calculations, the changes evident in the vibrational wavepaket dynamics in 2 are closely correlated with the “H” framed geometry in 2 compared to the “A” frame in 1, leading to the sharp increase in - interaction between ppy ligands. Although the TA experiments do not directly reveal the ultrafast intersystem crossing (ISC) because of a strong coherent spike at early timescales, the dependence of the vibrational wavepacket dynamics on molecular geometry can be understood based on previously proposed potential energy surfaces (PES) as function of PtPt distance, suggesting that the interaction between the cyclometalating ligands can be a key factor in determining the PtPt shortening and the related energy relaxation dynamics in the Pt(II) dimers. Further experiments using femtosecond broadband TA and X-ray scattering spectroscopy are planned to investigate directly the ISC and PtPt contraction, to support the relationship between ground state molecular geometry and photoinduced structural changes in the Pt(II) dimers.

Kim, Pyosang↗

Iterative spectral method for solving electrostatic or magnetostatic problems in complex and evolving heterostructures

Electrostatic or magnetostatic problems involving complex heterogeneity are nontrivial for modeling and simulation. Most existing numerical methods focus on sharp interface models and the computational cost increases with increasing complexity of the geometry. Here we develop an iterative spectral method, the bound charge successive approximation algorithm, to solve electrostatic or magnetostatic heterogeneity problems in the context of diffuse-interface modeling. As tests and verifications, this algorithm is applied to calculation of the depolarization factor of an ellipsoid, and simulation of random dielectric mixtures and the dielectophoretic motion of multiple particles. The algorithm shows excellent efficiency and the computational cost mainly depends on the permittivity or permeability contrast in the whole system, regardless of the complexity of the geometry. Specifically, for evolving heterostructures the solution of bound charge in one time step can be used as input for the next, which could further significantly shorten the iteration (approximation) process, making it practical to simulate the long-range electrostatic or magnetostatic interaction in complex and evolving heterostructures.

97 MATHEMATICS AND COMPUTING↗

Configurational subdiffusion of peptides: A network study

Molecular dynamics (MD) simulation of linear peptides reveals configurational subdiffusion at equilibrium extending from 10-12 to 10-8 s. Rouse chain and continuous-time random walk models of the subdiffusion are critically discussed. Network approaches to analyzing MD simulations are shown to reproduce the time dependence of the subdiffusive mean squared displacement, which is found to arise from the fractal-like geometry of the accessible volume in the configuration space. Convergence properties of the simulation pertaining to the subdiffusive dynamics are characterized and the effect on the subdiffusive properties of representing the solvent explicitly or implicitly is compared. Non-Markovianity and other factors limiting the range of applicability of the network models are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A circular equilibrium model for local gyrokinetic simulations of ion temperature gradient fluctuations in reversed field pinches

A simple large-aspect-ratio (R{sub 0}/r) circular equilibrium model is developed for low-beta reversed field pinch (RFP) geometry. The model is suitable for treating small scale instability and turbulent transport driven by ion temperature gradient (ITG) and related electron drift modes in gyrokinetic simulations. The equilibrium model is an RFP generalization of the common tokamak s-{alpha} model to small safety factor (q), where the poloidal field dominates the toroidal field. The model accommodates the RFP toroidal field reversal (where q vanishes) by generalizing the cylindrical force-free Bessel function model (BFM) [J. B. Taylor, Phys. Rev. Lett. 33, 1139 (1974)] to toroidal geometry. The global equilibrium can be described in terms of the RFP field reversal and pinch parameters [F,{Theta}]. This new toroidal Bessel function model (TBFM) has been incorporated into the gyrokinetic code GYRO [J. Candy and R. E. Waltz, J.Comput. Phys. 186, 545 (2003)] and used here to explore local electrostatic ITG adiabatic electron instability rates for typical low-q RFP parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An improved version of NCOREL: A computer program for 3-D nonlinear supersonic potential flow computations

A computer code called NCOREL (for Nonconical Relaxation) has been developed to solve for supersonic full potential flows over complex geometries. The method first solves for the conical at the apex and then marches downstream in a spherical coordinate system. Implicit relaxation techniques are used to numerically solve the full potential equation at each subsequent crossflow plane. Many improvements have been made to the original code including more reliable numerics for computing wing-body flows with multiple embedded shocks, inlet flow through simulation, wake model and entropy corrections. Line relaxation or approximate factorization schemes are optionally available. Improved internal grid generation using analytic conformal mappings, supported by a simple geometric Harris wave drag input that was originally developed for panel methods and internal geometry package are some of the new features.

Siclari, Michael J.↗

A Global Data Analysis for Representing Sediment and Particulate Organic Carbon Yield in Earth System Models

Although sediment yield (SY) from water erosion is ubiquitous and its environmental consequences are well recognized, its impacts on the global carbon cycle remain largely uncertain. This knowledge gap is partly due to the lack of soil erosion modeling in Earth System Models (ESMs), which are important tools used to understand the global carbon cycle and explore its changes. As such, this study analyzed sediment and particulate organic carbon yield (CY) data from 1081 and 38 small catchments (0.1-200 km 2 ), respectively, in different environments across the globe. Using multiple statistical analysis techniques, we explored environmental factors and hydrological processes important for SY and CY modeling in ESMs. Our results show clear correlations of high SY with traditional agriculture, seismicity and heavy storms, as well as strong correlations between SY and annual peak runoff. These highlight the potential limitation of SY models that represent only interrill and rill erosion because shallow overland flow and rill flow have limited transport capacity due to their hydraulic geometry to produce high SY. Further, our results suggest that SY modeling in ESMs should be implemented at the event scale to produce the catastrophic mass transport during episodic events. Several environmental factors such as seismicity and land management that are often not considered in current catchment-scale SY models can be important in controlling global SY. Our analyses show that SY is likely the primary control on CY in small catchments and a statistically significant empirical relationship is established to calculate SY and CY jointly in ESMs.

54 ENVIRONMENTAL SCIENCES↗

Pore-scale flow characterization of low-interfacial tension flow through mixed-wet porous media with different pore geometries

The low-interfacial tension flow through porous media occurs in surfactant-based enhanced oil recovery (EOR), soil clean-up, underground removal of the non-aqueous phase liquid and dense non-aqueous phase liquid, etc. In surfactant-based EOR processes, numerous works have been carried out to characterize - either qualitatively or quantitatively - the micro- and macro-scale flow behavior. What has been lacking is to link the statistics of oil blobs population (e.g., distribution of blob length and diameter) to the pore-scale phenomena and macro-scale quantities. In particular, no work has been reported to elucidate the effect of the ratio of pore body to throat diameter (i.e., aspect ratio) on the pore-scale characterization based on the blobs population statistics. The significance of the aspect ratio lies in that it describes the geometry of a porous medium and is one of the foremost morphological features. The aspect ratio is also one of the fundamental factors governing the pore-level events. This study presents the effect of aspect ratio on the statistical distribution of the blob length and equivalent diameter and links the blobs population statistics to the observed pore-level events. The pore-scale variation of the ratio of viscous-to-capillary forces acted on the oil blobs at the threshold of displacement is utilized to characterize the effect of blob length distribution at different aspect ratios. It also provides some insight into correlating the change in oil recovery efficiency and capillary number, by change in aspect ratio, with the change in blobs population statistics. (author)

02 PETROLEUM↗

Charge transfer properties of diphenyl substituted cyclopentadithiophene organic semiconductors: The role of fluorine and malononitrile substitutions and crystal ordering

The geometry and electronic structures of four cyclopentadithiophene (CPD) derivatives in their crystals are systematically studied through density functional theory (DFT) calculations. The factors influencing the CPDs' semiconductor nature and charge carrier mobility are analyzed in detail, revealing the different roles of fluorine and dicyanomethylene in the CPDs examined in this study. Malononitrile substitutions show a large effect in lowering the molecular LUMO energy level but induce a smaller charge transfer integral due to the resulting reduced crystal order caused by the resulting steric hindrance. In comparison, although F substitution lowers the LUMO level more weakly than C(CN) 2 substitution, it allows the molecule to retain a more planar configuration with more orbital delocalization, and the crystals of the F substituted compounds are more ordered than those of the C(CN) 2 substituted compounds. Overall, this comparison can explain why F substitution is a more effective method to cause a transition of a p-type semiconductor to n-type. Crystal ordering plays a significant role in determining the charge transfer mobility in devices. In spite of the advantage offered by dicyanomethylene substitution in terms of charge injection barrier compared to fluorine substitution, the reduced crystal order caused by C(CN) 2 limits the charge transfer in CPDs with C(CN) 2 substitution. The validity of these findings can be generalized, which is expected to contribute to the rational design of n-type semiconductors based on CPDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Stress Ratio on the Fatigue Behavior of a Friction Stir Processed Cast Al-Si-Mg Alloy

The effect of friction stir processing (FSP) on the fatigue life of a cast Al-7Si-0.6Mg alloy at a stress ratio of R=0 was evaluated. Two types of specimen geometry were used for the FSPed condition, through-thickness processed and partial thickness processed. FSP enhanced the fatigue life by a factor of 15 for the through thickness processed samples at lower stress amplitudes. This is different from the FSP specimens tested at R=-1 and similar stress amplitudes where a 5 times improvement in fatigue life was observed. In light of these observations, various closure mechanisms were examined.

36 MATERIALS SCIENCE↗

Three phase interfaces at electrified metal-solid electrolyte systems I. study of the Pt(hkl)-Nafion interface.

A voltammetric fingerprinting approach has been used to probe the nature of Pt-Nafion three phase interfaces for Pt(hkl) and polycrystalline platinum surfaces. Nature of adsorbing species is identified as the sulfonate anions via CO charge displacement technique. The affinity for the sulfonate anions to adsorb on the electrode surface is investigated. Adsorption strength of the sulfonate anions with the electrode surface is compared with other strongly adsorbing anions such as (bi) sulfates and chlorides. Various factors that influence the adsorption properties of the sulfonate anions are studied. Nature and strength of the anion interaction with various surface geometries is also discussed. A physical model is presented to describe the observed phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare-Earths Centers (Sm{sup 3+}, Eu{sup 3+}, Yb{sup 3+}) in MeF{sub 2}(Me = Ca, Sr, Ba, Cd) Crystals

Rare-earth elements RE{sup 3+}(RE = Sm, Eu, Yb) form impurity centers in fluorite-like crystals MeF{sub 2}(Me = Ca, Sr, Ba, Cd). The crystal structure of cubic, trigonal and tetragonal centers in MeF{sub 2} has been investigated in the framework of shell model and pair potential approximation. The crystal field parameters were calculated with the exchange charges model, using the optimized geometry of the doped host matrix. With these parameters we have been calculated the optical spectra and spin-Hamiltonian (g-factors) of RE{sup 3+} in MeF{sub 2}, for some combination of R{sup 3+} and MeF{sup 2}. The obtained results were discussed and comparison with experimental data was made. A good agreement confirms the method and model of calculations.

36 MATERIALS SCIENCE↗

Entropic stochastic resonance without external force in oscillatory confined space

We have studied the dynamics of Brownian particles in a confined geometry of dumbbell-shape with periodically oscillating walls. Entropic stochastic resonance (ESR) behavior, characterizing by a maximum value of the coherent factor Q at some optimal level of noise, is observed even without external periodic force in the horizontal direction, which is necessary for conventional ESR where the wall is static and the particle is subjected to the force. Interestingly, the ESR can be remarkably enhanced by the particle gravity G, in contrast to the conventional case. In addition, Q decreases (increases) with G in the small (large) noise limit, respectively, while it non-monotonically changes with G for moderate noise levels. We have applied an effective 1D coarsening description to illustrate such a nontrivial dependence on G, by investigating the property of the 1D effective potential of entropic nature and paying special attention to the excess part resulting from the boundary oscillation. Dependences of the ESR strength with other related parameters are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

View factor modeling of sputter-deposition on micron-scale-architectured surfaces exposed to plasma

The sputter-deposition on surfaces exposed to plasma plays an important role in the erosion behavior and overall performance of a wide range of plasma devices. Plasma models in the low density, low energy plasma regime typically neglect micron-scale surface feature effects on the net sputter yield and erosion rate. The model discussed in this paper captures such surface architecture effects via a computationally efficient view factor model. The model compares well with experimental measurements of argon ion sputter yield from a nickel surface with a triangle wave geometry with peak heights in the hundreds of microns range. Further analysis with the model shows that increasing the surface pitch angle beyond about 45° can lead to significant decreases in the normalized net sputter yield for all simulated ion incident energies (i.e., 75, 100, 200, and 400 eV) for both smooth and roughened surfaces. At higher incident energies, smooth triangular surfaces exhibit a nonmonotonic trend in the normalized net sputter yield with surface pitch angle with a maximum yield above unity over a range of intermediate angles. The resulting increased erosion rate occurs because increased sputter yield due to the local ion incidence angle outweighs increased deposition due to the sputterant angular distribution. The model also compares well with experimentally observed radial expansion of protuberances (measuring tens of microns) in a nano-rod field exposed to an argon beam. The model captures the coalescence of sputterants at the protuberance sites and accurately illustrates the structure's expansion due to deposition from surrounding sputtering surfaces; these capabilities will be used for future studies into more complex surface architectures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Niobium coaxial cavities with internal quality factors exceeding 1.4 × 10 9 for circuit quantum electrodynamics

Group-V materials such as niobium and tantalum have become popular choices for extending the performance of circuit quantum electrodynamics (cQED) platforms, allowing for quantum processors and memories with reduced error rates and more modes. The complex surface chemistry of niobium, however, makes identifying the main modes of decoherence difficult at millikelvin temperatures and single-photon powers. We use niobium coaxial quarter-wave cavities to study the impact of etch chemistry, prolonged atmospheric exposure, and the significance of cavity conditions prior to and during cooldown—in particular, niobium hydride evolution—on single-photon coherence. We demonstrate cavities with quality factors Q int ≳ 1.4 × 10 9 in the single-photon regime, a 15-fold improvement over aluminum cavities of the same geometry. We rigorously quantify the sensitivity of our fabrication process to various loss mechanisms and demonstrate a two- to fourfold reduction in the two-level system loss tangent and a three- to fivefold improvement in the residual resistance over traditional buffered chemical polishing etching techniques. Finally, we demonstrate transmon integration and coherent cavity control while maintaining a cavity coherence of 11.3 ms. The accessibility of our method, which can be easily replicated in academic laboratory settings, together with the demonstration of its performance, mark an advancement in three-dimensional cQED.

Oriani, Andrew E. [Chicago U., EFI; Chicago U.] (O↗

Signatures of pairing in the magnetic excitation spectrum of strongly correlated two-leg ladders [Signatures of pairing in the magnetic excitation spectrum of strongly correlated ladders]

Magnetic interactions are widely believed to play a crucial role in the microscopic mechanism leading to high critical temperature superconductivity. It is therefore important to study the signatures of pairing in the magnetic excitation spectrum of simple models known to show unconventional superconducting tendencies. Using the density matrix renormalization group technique, we calculate the dynamical spin structure factor S(k,ω) of a generalized t–U–J Hubbard model away from half filling in a two-leg ladder geometry. The addition of J enhances pairing tendencies. We analyze quantitatively the signatures of pairing in the magnetic excitation spectra. We found that the superconducting pair-correlation strength, that can be estimated independently from ground state properties, is closely correlated with the integrated low-energy magnetic spectral weight in the vicinity of (π,π). In this wave-vector region, robust spin incommensurate features develop with increasing doping. The branch of the spectrum with rung direction wave vector k rung =0 does not change substantially with doping where pairing dominates and thus plays a minor role. As a result, we discuss the implications of our results for neutron scattering experiments, where the spin excitation dynamics of hole-doped quasi-one-dimensional magnetic materials can be measured and also address implications for recent resonant inelastic x-ray scattering experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-G-IeP3-01: Better Kerma-Area-Product (KAP) Estimation Using the System Parameters in Radiography and Fluoroscopy

Purpose: Accurate values for Kerma-Area-Product (KAP) are needed for patient dosimetry and quality control for exams utilizing radiographic and/or fluoroscopic imaging. The KAP measured using a typical direct KAP meter built with parallel-plate transmission ionization chamber is not precise and depends on the energy spectrum of diagnostic x-rays. This study compared the accuracy and reproducibility of KAP derived from system parameters with values measured with a direct KAP meter. Methods: IEC tolerance for displayed KAP is specified up to ± 35% above 2.5 Gy-cm{sup 2} and manufacturer’s specifications are typically ± 25%. KAP values from the direct KAP meter drifts with time leading to replacement or re-calibration. More precise and consistent KAP is achievable utilizing a database of known radiation output for various system parameters. The integrated KAP meter was removed from a radiography system. A total of 48 measurements of air kerma were acquired at x-ray tube potential from 40 to 150 kVp with 10 kVp increment using ion chamber type external dosimeter at free-in-air geometry for four different types of filter combinations following the manufacturer’s service procedure. These data were used to create updated correction factors that determine air kerma computationally for given system parameters. Results of calculated KAP were evaluated against results using a calibrated ion chamber based dosimeter and a computed radiography imaging plate to measure x-ray field size. Results: The accuracy of calculated KAP from the system parameters was better within 4% deviation in all diagnostic x-ray tube potentials tested from 50 to 140 kVp. In contrast, deviations of up to 25% were measured from KAP displayed from the direct KAP meter. Conclusion: The “calculated KAP” approach provides the nominal advantage of improved accuracy and precision of displayed KAP as well as reduced cost of calibrating or replacing integrated KAP meters.

60 APPLIED LIFE SCIENCES↗