Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Analysis of carbon in SrTiO{sub 3} grown by hybrid molecular beam epitaxy

Secondary ion mass spectroscopy (SIMS) was used to investigate carbon impurity concentrations in stoichiometric SrTiO{sub 3} films grown by a hybrid molecular beam epitaxy approach that uses an effusion cell to supply strontium, a rf plasma source for oxygen and a metal organic titanium source (titanium tetra isopropoxide). The carbon concentration in the films was measured as a function of growth parameters. At sufficiently high growth temperatures (>800 degree sign C), the films contain a few ppm of carbon. The challenges in accurately quantifying low carbon concentrations are discussed. A carbon-containing contamination layer is detected on the surfaces of SrTiO{sub 3} substrates and air-exposed films by SIMS and in scanning transmission electron microscopy. The contamination layer could be removed by high-temperature predeposition oxygen plasma cleaning.

36 MATERIALS SCIENCE↗

Formation, Structural Variety, and Impact of Antiphase Boundaries on Li Diffusion in LiCoO 2 Thin-Film Cathodes

Anti-phase boundaries (APBs) are observed in as synthesized and processed LiCoO 2 , which is used widely as a cathode material. Using a combination of scanning transmission electron microscopy and ab initio simulations, we investigate APB formation, structure, stability, and impact on Li ion diffusion. It is found that APB low-coordinated sites give rise to cation defects which, in turn, provide a variety of APB structures. Li diffusion along an APB can enter a correlated mode, leading to a ~40% decrease in activation energy with respect to that for the uncorrelated hopping of Li ions. We propose that APBs function as additional mass transfer channels that couple in-plane Li ion diffusion pathways, thus, facilitating Li transfer from one two-dimensional basin to another, potentially enabling new energy storage architectures.

Ong, Phuong-Vu↗

Differentially rotating white dwarfs. I. Regimes of internal rotation

Most viable models of Type Ia supernovae (SNe Ia) require the thermonuclear explosion of a carbon/oxygen white dwarf that has evolved in a binary system. Rotation could be an important aspect of any model for SNe Ia, whether single or double degenerate, with the white dwarf mass at, below, or above the Chandrasekhar limit. Differential rotation is specifically invoked in attempts to account for the apparent excess mass in the super-Chandrasekhar events. Some earlier work has suggested that only uniform rotation is consistent with the expected mechanisms of angular momentum transport in white dwarfs, while others have found pronounced differential rotation. We show that if the baroclinic instability is active in degenerate matter and the effects of magnetic fields are neglected, both nearly uniform rotation and strongly differential rotation are possible. We classify rotation regimes in terms of the Richardson number, Ri. At small values of Ri ⩽ 0.1, we find both the low-viscosity Zahn regime with a nonmonotonic angular velocity profile and a new differential rotation regime for which the viscosity is high and scales linearly with the shear, σ. Employment of Kelvin–Helmholtz viscosity alone yields differential rotation. Large values of Ri ≫ 1 produce a regime of nearly uniform rotation for which the baroclinic viscosity is of intermediate value and scales as σ{sup 3}. We discuss the gap in understanding of the behavior at intermediate values of Ri and how observations may constrain the rotation regimes attained by nature.

79 ASTRONOMY AND ASTROPHYSICS↗

Fluid-enhanced surface diffusion controls intraparticle phase transformations

Phase transformations driven by compositional change require mass flux across a phase boundary. In some anisotropic solids, however, the phase boundary moves along a non-conductive crystallographic direction. One such material is Li X FePO 4 , an electrode for lithium-ion batteries. With poor bulk ionic transport along the direction of phase separation, it is unclear how lithium migrates during phase transformations. Here, we show that lithium migrates along the solid/liquid interface without leaving the particle, whereby charge carriers do not cross the double layer. X-ray diffraction and microscopy experiments as well as ab initio molecular dynamics simulations show that organic solvent and water molecules promote this surface ion diffusion, effectively rendering Li X FePO 4 a three-dimensional lithium-ion conductor. Phase-field simulations capture the effects of surface diffusion on phase transformation. Lowering surface diffusivity is crucial towards supressing phase separation. In conclusion, this work establishes fluid-enhanced surface diffusion as a key dial for tuning phase transformation in anisotropic solids.

36 MATERIALS SCIENCE↗

Angular correlations in the cosmic gamma-ray background from dark matter annihilation around intermediate-mass black holes

Dark matter (DM) annihilation could in principle contribute to the diffuse cosmic gamma-ray background. While with standard assumptions for cosmological and particle physics parameters this contribution is expected to be rather small, a number of processes could boost it, including a larger-than-expected DM annihilation cross section, or the occurrence of DM substructures such as DM minispikes around intermediate-mass black holes. We show that angular correlations of the cosmic gamma-ray background provide a tool to disentangle the signal induced by DM annihilation in minispikes from a conventional astrophysical component. Treating blazars as a known background, we study the prospects for detecting DM annihilations with the Fermi Gamma-Ray Space Telescope for different choices of DM mass and annihilation channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Frontside-micromachined planar piezoresistive vibration sensor: Evaluating performance in the low frequency test range

Using a surface piezoresistor diffusion method and front-side only micromachining process, a planar piezoresistive vibration sensor was successfully developed with a simple structure, lower processing cost and fewer packaging difficulties. The vibration sensor had a large sector proof mass attached to a narrow flexure. Optimization of the boron diffusion piezoresistor placed on the edge of the narrow flexure greatly improved the sensitivity. Planar vibration sensors were fabricated and measured in order to analyze the effects of the sensor dimensions on performance, including the values of flexure width and the included angle of the sector. Sensitivities of fabricated planar sensors of 0.09–0.46 mV/V/g were measured up to a test frequency of 60 Hz. The sensor functioned at low voltages (<3 V) and currents (<1 mA) with a high sensitivity and low drift. At low background noise levels, the sensor had performance comparable to a commercial device.

36 MATERIALS SCIENCE↗

Suppression effect of silicon (Si) on Er{sup 3+} 1.54μm excitation in ZnO thin films

We have investigated the photoluminescence (PL) characteristics of ZnO:Er thin films on Si (100) single crystal and SiO{sub 2}-on-silicon (SiO{sub 2}) substrates, synthesized by radio frequency magnetron sputtering. Rutherford backscattering/channeling spectrometry (RBS), X-ray diffraction (XRD) and atomic force microscope (AFM) were used to analyze the properties of thin films. The diffusion depth profiles of Si were determined by second ion mass spectrometry (SIMS). Infrared spectra were obtained from the spectrometer and related instruments. Compared with the results at room temperature (RT), PL (1.54μm) intensity increased when samples were annealed at 250°C and decreased when at 550°C. A new peak at 1.15μm from silicon (Si) appeared in 550°C samples. The Si dopants in ZnO film, either through the diffusion of Si from the substrate or ambient, directly absorbed the energy of pumping light and resulted in the suppression of Er{sup 3+} 1.54μm excitation. Furthermore, the energy transmission efficiency between Si and Er{sup 3+} was very low when compared with silicon nanocrystal (Si-NC). Both made the PL (1.54μm) intensity decrease. All the data in experiments proved the negative effects of Si dopants on PL at 1.54μm. And further research is going on.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Wadis in Support of Lunar Exploration: Concept Development and Utilization

Thermal wadis, engineered sources of heat, can be used to extend the life of lunar rovers by keeping them warm during the extreme cold of the lunar night. Thermal wadis can be manufactured by sintering or melting lunar regolith into a solid mass with more than two orders of magnitude higher thermal diffusivities compared to native regolith dust. Small simulant samples were sintered and melted in the electrical furnaces at different temperatures, different heating and cooling rates, various soaking times, under air, or in an argon atmosphere. The samples were analyzed with scanning electron microscopy and energy dispersive spectroscopy, X-ray diffraction, a laser-flash thermal diffusivity system, and the millimeter-wave system. The melting temperature of JSC-1AF simulant was ~50°C lower in an Ar atmosphere compared to an air atmosphere. The flow of Ar during sintering and melting resulted in a small mass loss of 0.04 to 0.1 wt% because of the volatization of alkali compounds. In contrast, the samples that were heat-treated under an air atmosphere gained from 0.012 to 0.31 wt% of the total weight. A significantly higher number of cavities were formed inside the samples melted under an argon atmosphere, possibly because of the evolution of oxygen bubbles from iron redox reactions. The calculated emissivity of JSCf-1AF simulant did not change much with temperature, varying between 0.8 and 0.95 at temperatures from 100 to 1200°C. The thermal diffusivities of raw regolith that was compressed under a pressure of 9 metric tons ranged from 0.0013 to 00011 in the 27 to 390°C temperature range. The thermal diffusivities of sintered and melted JSC-1AF simulant varied from 0.0028 to 0.0072 cm2/s with the maximum thermal diffusivities observed in the samples that were heated up 5°C/min from RT to 1150°C under Ar or air. These thermal diffusivities are high enough for the rovers to survive the extreme cold of the Moon at the rim of the Shackleton Crater and allow them to operate for months (or years) as opposed to weeks on the lunar surface. Future investigations will be focused on a system that can efficiently construct a thermal wadi from the lunar mare regolith. Solar heating, microwave heating, or electrical resistance melting are considered.

14 SOLAR ENERGY↗

Using Nanoparticle X-ray Spectroscopy to Probe the Formation of Reactive Chemical Gradients in Diffusion-Limited Aerosols

For aerosol particles that exist in highly viscous, diffusion-limited states, steep chemical gradients are expected to form during photochemical aging in the atmosphere. Under these conditions, species at the aerosol surface are more rapidly transformed than molecules residing in the particle interior. To examine the formation and evolution of chemical gradients at aerosol interfaces, the heterogeneous reaction of hydroxyl radicals (OH) on ~200 nm particles of pure squalane (a branched, liquid hydrocarbon) and octacosane (a linear, solid hydrocarbon) and binary mixtures of the two are used to understand how diffusion limitations and phase separation impact the particle reactivity. Aerosol mass spectrometry is used to measure the effective heterogeneous OH uptake coefficient (γ eff ) and oxidation kinetics in the bulk, which are compared with the elemental composition of the surface obtained using X-ray photoemission. When diffusion rates are fast relative to the reaction frequency, as is the case for squalane and low-viscosity squalane–octacosane mixtures, the reaction is efficient (γ eff ~ 0.3) and only limited by the arrival of OH to the interface. However, for cases, where the diffusion rates are slower than reaction rates, as in pure octacosane and higher-viscosity squalane–octacosane mixtures, the heterogeneous reaction occurs in a mixing-limited regime and is ~10× slower (γ eff ~ 0.03). This is in contrast to carbon and oxygen K edge X-ray absorption measurements that show that the octacosane interface is oxidized much more rapidly than that of pure squalane particles. The O/C ratio of the surface (estimated to be the top 6–8 nm of the interface) is measured to change with rate constants of (3.0 ± 0.9) × 10 –13 and (8.6 ± 1.2) × 10 –13 cm 3 molecule –1 s –1 for squalane and octacosane particles, respectively. The differences in surface oxidation rates are analyzed using a previously published reaction-diffusion model, which suggests that a 1–2 nm highly oxidized crust forms on octacosane particles, whereas in pure squalane, the reaction products are homogeneously mixed within the aerosol. This work illustrates how diffusion limitations can form particles with highly oxidized surfaces even at relatively low oxidant exposures, which is in turn expected to influence their microphysics in the atmosphere.

74 ATOMIC AND MOLECULAR PHYSICS↗

Isotope mass scaling and transport comparison between JET Deuterium and Tritium L-mode plasmas

The dimensionless isotope mass scaling experiment between pure Deuterium and pure Tritium plasmas with matched $\rho^*$, $\nu^*$ , β n , q and $T_e/T_i$ has been achieved in JET L-mode with dominant electron heating (NBI+ohmic) conditions. 28% higher scaled energy confinement time $B_t\tau_{E,\mathrm{th}}/A$ is found in favour of the Tritium plasma. This can be cast in the form of the dimensionless energy confinement scaling law as $\Omega_i \tau_{E,\mathrm{th}} \sim A^{0.48 \pm 0.16}$. This significant isotope mass scaling is consequently seen in the scaled one-fluid heat diffusion coefficient $A \chi_{\mathrm{eff}}/B_t$ which is around 50% lower in the Tritium plasma throughout the whole plasma radius. The isotope mass dependence in the particle transport channel is negligible, supported also by the perturbative particle transport analysis with gas puff modulation. The comparison of the edge particle fuelling or ionisation profiles from the EDGE2D-EIRENE simulations show that the absolute density differences that are necessary for the dimensionless match in the confined plasma dominate over any isotope mass dependencies of particle fuelling and ionization profiles at the plasma edge. Local GENE simulation results indicate a mild anti-gyroBohm effect at $\rho_\mathrm{tor}$ = 0.6 and thereby a small isotope mass dependence in favour of Tritium on heat transport and a negligible effect on particle transport. A significant fraction of the isotope scaling and reduced heat transport observed in the Tritium plasma is not captured in the GENE and ASTRA-TGLF-SAT2 simulations by simply changing the isotope mass for the same input profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanoconfinement and mass transport in metal–organic frameworks

The ubiquity of metal–organic frameworks in recent scientific literature underscores their highly versatile nature. MOFs have been developed for use in a wide array of applications, including: sensors, catalysis, separations, drug delivery, and electrochemical processes. Often overlooked in the discussion of MOF-based materials is the mass transport of guest molecules within the pores and channels. Given the wide distribution of pore sizes, linker functionalization, and crystal sizes, molecular diffusion within MOFs can be highly dependent on the MOF-guest system. In this paper, we discuss the major factors that govern the mass transport of molecules through MOFs at both the intracrystalline and intercrystalline scale; provide an overview of the experimental and computational methods used to measure guest diffusivity within MOFs; and highlight the relevance of mass transfer in the applications of MOFs in electrochemical systems, separations, and heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multicomponent mutual diffusion in the warm, dense matter regime

In this work, we present the formulation, simulations, and results for multicomponent mutual diffusion coefficients in the warm, dense matter regime. While binary mixtures have received considerable attention for mass transport, far fewer studies have addressed ternary and more complex systems. We therefore explicitly examine ternary systems utilizing the Maxwell-Stefan formulation that relates diffusion to gradients in the chemical potential. Onsager coefficients then connect the macroscopic diffusion to microscopic particle motions, evinced in trajectories characterized by positions and velocities, through various autocorrelation functions (ACFs). These trajectories are generated by molecular dynamics (MD) simulations either through the Born-Oppenheimer approximation, which treats the ions classically and the electrons quantum-mechanically by an orbital-free density-functional theory, or through a classical MD approach with Yukawa pair-potentials, whose effective ionizations and electron screening length derive from quantal considerations. We employ the reference-mean form of the ACFs and determine the center-of-mass coefficients through a simple reference-frame-dependent similarity transformation. The Onsager terms in turn determine the mutual diffusion coefficients. We examine a representative sample of ternary mixtures as a function of density and temperature from those with only light elements (D-Li-C, D-Li-Al) to those with highly asymmetric mass components (D-Li-Cu, D-Li-Ag, H-C-Ag). We also follow trends in the diffusion as a function of number concentration and evaluated the efficacy of various approximations such as the Darken approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mathematical Model of Transfer and Deposition of Finely Dispersed Particles in a Turbulent Flow of Emulsions and Suspensions

The problem of modeling turbulent transfer of finely dispersed particles in liquids has been considered. An approach is used where the transport of particles is represented in the form of a variety of the diffusion process with the coefficient of turbulent transfer to the wall. Differential equations of transfer are written for different cases, and a solution of the cell model is obtained for calculating the efficiency of separation in a channel. Based on the theory of turbulent transfer of particles and of the boundary layer model, an expression has been obtained for calculating the rate of turbulent deposition of finely dispersed particles. The application of this expression in determining the efficiency of physical coagulation of emulsions in different channels and on the surface of chaotic packings is shown.

42 ENGINEERING↗

Using ducted fuel injection to attenuate or prevent soot formation in mixing-controlled combustion strategies for engine applications

Ducted fuel injection is a strategy that can be used to enhance the fuel/charge-gas mixing within the combustion chamber of a direct-injection compression-ignition engine. The concept involves injecting the fuel through a small tube within the combustion chamber to make the most fuel-rich regions of the micture in the autoignition zone leaner relative to a conventional free-spray configuration (i.e., a fuel spray that is not surrounded by a duct). This study is a follow-on to initial proof-of-concept experiments that also were conducted in a constant-volume combustion vessel. While the initial natural luminosity imaging experiments demonstrated that ducted fuel injection lowers soot incandescence dramatically, this work adds a more quantitative diffuse back-illumination diagnostic to measure soot mass, as well as investigates the effects on performance of varying duct geometry (axial gap, length, diameter, and inlet and outlet shapes), ambient density, and charge-gas dilution level. The result is that ducted fuel injection is further proven to be effective at lowering soot by 35–100% across a wide range of operating conditions and geometries, and guidance is offered on geometric parameters that are most important for improving performance and facilitating packaging for engine applications.

33 ADVANCED PROPULSION SYSTEMS↗

Direct Effect of Solvent Viscosity on the Physical Mass Transfer for Wavy Film Flow in a Packed Column

ABSTRACT Post-combustion carbon capture via solvent absorption in a packed column can be a promising technology for mitigating greenhouse gas emissions. The mass transfer between gas and liquid solvent phases plays a critical role in determining the packing height of the packed column. Recent experiments [1] involving physical mass transfer for aqueous amine in a packed column have distinguished the direct and indirect impacts of viscosity (µ_L) on the mass transfer coefficient ?( k?_L). The direct impact of viscosity on the mass transfer coefficient has been found to be significantly higher for a packed column ?(k?_L~µ_L^(-0.38)) than a wetted wall column (WWC) ?(k?_L~µ_L^(-0.17)). To explain the deviation from the well-controlled uniform film flow in a WWC, we propose a mechanism involving the unavoidable wavy film flow and eddy-enhanced mass transfer in a packed column. A mathematical analysis based on fundamental flow and mass transfer equations is presented to quantify this deviation. The correlation for mass transfer coefficient derived from the mathematical analysis is found to match the corresponding one derived from the experiments for a packed column. Multiphase flow simulations using the Volume of Fluid method also are conducted to verify the direct impact of viscosity on the mass transfer coefficient for both uniform and wavy film flows. The mass transfer coefficient calculated from simulations shows steeper variation with viscosity for wavy film compared to the uniform film, further confirming our proposed theory. A similar relation ?(k?_L~µ^(-0.38)) for wavy film flow in a packed column is observed for aqueous solvent from both theory, experiment, and computer simulations.

Mass transfer, viscosity, eddy diffusion↗

Tandem Electrocatalytic CO 2 Reduction with Efficient Intermediate Conversion over Pyramid-Textured Cu–Ag Catalysts

If combined with renewably generated electricity, electrochemical CO 2 reduction (E-CO 2 R) could be used as a sustainable source of chemicals and fuels. Tandem catalysis approaches are attractive for providing the product selectivity, which would be required for commercial applications. Here, we demonstrate a two-step tandem electrocatalytic E-CO 2 R with efficient conversion of the intermediate species. The catalyst scaffold is Si(100), which is etched to form a textured surface consisting of micron-sized pyramid structures with the {111} facets. Two metals are used in the electrocatalytic cascade: Ag is employed to perform a two-electron reduction of CO 2 to the intermediate CO, and Cu performs conversion to more reduced products. Using high-angle physical vapor deposition, we form separated, micron-scale areas of the two electrocatalysts on opposite sides of the pyramids, with their relative surface coverages being tunable with the deposition angle. Compared to the textured scaffolds with blanket Ag and Cu used as controls, bimetallic pyramid tandem catalysts have higher current densities and much lower faradic efficiencies (FE) for CO. These effects are due to efficient conversion of the CO formed on Ag to more reduced products on Cu. Methane is the main product to be enhanced by the cascade pathway: a bimetallic catalyst with approximately equal coverages of Ag and Cu produces methane with a FE of 62% at -1.1 V RHE , corresponding to a partial current density of 12.7 mA cm -2 . We estimate an intermediate conversion yield for the CO intermediate of 80-90%, which is close to the mass-transport limited value predicted by reaction-diffusion simulations.

36 MATERIALS SCIENCE↗

Along the Channel Gradients Impact on the Spatioactivity of Gas Diffusion Electrodes at High Conversions during CO 2 Electroreduction

Results of a 2-D transport model for a gas diffusion electrode performing CO 2 reduction to CO with a flowing catholyte are presented, including the concentration gradients along the flow cell, spatial distribution of the current density and local pH in the catalyst layer. The model predicts that both the concentration of CO 2 and the buffer electrolyte gradually diminish along the channels for a parallel flow of gas and electrolyte as a result of electrochemical conversion and nonelectrochemical consumption. At high single-pass conversions, significant concentration gradients exist along the flow channels leading to large local variations in the current density (>150 mA/cm 2 ), which becomes prominent when compared to ohmic losses. In addition, concentration overpotentials change dramatically with CO 2 flow rate, which results in significant differences in outlet concentrations at high conversions. The outlet concentration of CO attains a maximum of 80% along with 5% CO 2 and 15% H 2 , although the maximum single-pass conversion is limited to below 60% due to homogeneous consumption by the electrolyte. Fundamental and practical implications of our findings on electrochemical CO 2 reduction are discussed with a focus on the trade-off between high current density operation and high single-pass conversion efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DRIFTS-QMS study of room temperature CO oxidation on Au/SiO2 catalyst: nature and role of different Au species

The nature and role of different Au species on a Au/SiO2 catalyst in room temperature (rt) CO oxidation have been studied by operando diffuse reflectance infrared spectroscopy (DRIFT) coupled with quadruple mass spectrometry (QMS). It has shown that different pretreatments (oxidative and reductive) of Au/SiO2 have significant effect on the nature of Au species and thus the CO oxidation performance. High temperature (500 C) O2-treatment leads to cationic Au species which is inactive for rt CO oxidation. Reductive treatment (either H2 or CO) results in metallic Au species that are immediately active for rt CO oxidation. Furthermore, CO oxidation activity is found in good correlation with the reduction degree of Au species, a clear indication of the essential role of metallic Au species played in rt CO oxidation. The accompanying slight deactivation with the oxidation of metallic Au species on reductively treated Au/SiO2 in CO oxidation suggests that cationic Au species may play a negative role in rt CO oxidation. The effect of water in rt CO oxidation on Au/SiO2 was also investigated. Two positive roles played by water in CO oxidation have been identified: activation of O2 and reduction of cationic Au species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗