Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Investigation of the changes in microstructure and transport properties of leached cement pastes accounting for mix composition

Ca-leaching of cement-based materials induces detrimental effects on properties related to long-term durability. A better understanding of leaching degradation in terms of alterations in mineralogy, microstructure, and transport properties is important for long-term assessments of concrete and reinforced concrete structures used in nuclear waste disposal systems or in hydro structures. However, the decalcification process is not easy to study because it is extremely slow. In this study, an ammonium nitrate (NH{sub 4}NO{sub 3}) solution of 6 mol/l was used to accelerate the leaching kinetics. The experiments were performed on cement paste samples with different water/powder (w/p) and limestone filler (LS) replacement ratios. Both the change of sample mass over time and the amount of calcium ion leached out were monitored during the test. Different post-analysis techniques including SEM/SEM-EDX, XRD/QXRD, MIP, ion chromatography, and N{sub 2}-adsorption were used to characterize the microstructural and mineralogical changes. The effect of accelerated leaching on transport properties was studied by measuring the changes in water permeability and diffusivity of dissolved gases. Results showed that the square-root-time law of degradation was applicable under accelerated conditions. Both higher w/p ratios and LS replacements increased the rate of leaching propagation; the former had a more significant effect. The accelerated leaching significantly altered the microstructure of the cement paste to a material with a higher specific surface area, increased total porosity and a shift to larger pore sizes. Those changes led to a significant increase in water permeability (one to two orders of magnitude) and diffusivity (less than one order) depending on degradation state.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and electrical proprieties of new phosphate KCoP{sub 3}O{sub 9}

Crystals of new tricyclophosphate KCoP{sub 3}O{sub 9} have been grown from solid state reaction and characterized by single crystal X-ray diffraction. KCoP{sub 3}O{sub 9} crystallizes in the hexagonal system, space group P6{sup ¯}c2, with a=6.616 (7) Å; c=9.788 (3) Å; V=371.06 (13) Å{sup 3}, Z=2. The final agreement factors are R=0.014, ωR=0.038, S(F{sup 2})=1.231. The structure of the title compound can be described as a three-dimensional framework built up of corner sharing CoO{sub 6} and PO{sub 4} polyhedra containing wide tunnels oriented along [001] direction and others, less broad, along [100] and [010] directions. The structural model was validated by bond valence sum (BVS) and charge distribution (CD) methods. Ball milling was used to reduce the particles sizes of the synthesized powder. At the optimal sintering temperature of 800 °C, a relative density of 85% was obtained. The microstructure was characterized by scanning electron microscopy. The electrical conductivity was 8.4×10{sup −7} S cm{sup −1} and 1.7×10{sup −4} S cm{sup −1} at 480 °C and 680 °C respectively. The activation energy deduced from the slope is 2.2 eV at low temperature region and 1.2 eV at high temperature region. The BVS model is extended to simulate the ionic migration pathways of alkali cations in the anionic framework. The BVS calculation shows one-dimensional pathways migration along c-axis. - Graphical abstract: 1D pathways link K atoms along c-axis with bond valence mismatch |ΔV(K)|=0.8 v.u. - Highlights: • A new single crystal KCoP{sub 3}O{sub 9} was grown by solid state reaction and its structure determined by single-crystal X-ray diffraction. • The purity polycrystalline of KCoP{sub 3}O{sub 9} sample was verified by Rietveld refinement. • The CIS measurements were optimized and the obtained spectra were fitted by electrical equivalent circuits. • The conduction pathways for the K{sup +} cations are simulated by means of the bond valence sum model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying Transport, Geometrical, and Morphological Parameters in Li-Ion Cathode Phases Using X-ray Microtomography

The charge/discharge capabilities of Li-ion cathodes are influenced by the meso-scale geometry, transport properties, and morphological parameters of the constituent phases in the cathode: active material, binder, conductive additive, and pore. Electrode processing influences the structure and attendant properties of these constituents. Thus, performance of the battery can be enhanced by correlating various electrode processing techniques with the charge/discharge behavior in the lithium-ion cathodes. X-ray microtomography was used to image samples obtained from pristine Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 (NMC) cathodes subjected to distinct processing approaches. Two sample preparation approaches were applied to the samples prior to microtomography. Casting the samples in epoxy yielded only the cathode active material domain. Encapsulating the sample with Kapton tape yielded phase contrast data that permitted segmentation of the active material and combined carbon/binder and pore regions. Here, geometrical and morphological details of the active material and the secondary phases were characterized and compared between the varied processing approaches. Calendered and ball-milled samples exhibited distinct differences in both geometry and morphology. Drying modes demonstrated variation in the distribution of the secondary and pore phases. Applying phase contrast capabilities, the processing–morphology relationship can be better understood to enhance overall battery performance across multiple scales.

36 MATERIALS SCIENCE↗

Investigation of a Novel NDE Method for Monitoring Thermomechanical Damage and Microstructure Evolution in Ferritic-Martensitic Steels for Generation IV Nuclear Energy Systems

The main goal of the proposed project is the development of validated nondestructive evaluation (NDE) techniques for in situ monitoring of ferritic-martensitic steels like Grade 91 9Cr-1Mo, which are candidate materials for Generation IV nuclear energy structural components operating at temperatures up to ≈650 °C and for steam-generator tubing for sodium-cooled fast reactors. Full assessment of thermomechanical damage requires a clear separation between thermally activated microstructural evolution and creep damage caused by simultaneous mechanical stress. Creep damage can be classified as "negligible" creep without significant plastic strain and "ordinary" creep of the primary, secondary, and tertiary kind that is accompanied by significant plastic deformation and/or cavity nucleation and growth. Under negligible creep conditions of interest in this project, minimal or no plastic strain occurs, and the accumulation of creep damage does not significantly reduce the fatigue life of a structural component so that low-temperature design rules, such as the ASME Section III, Subsection NB, can be applied with confidence. The proposed research project will utilize a multifaceted approach in which the feasibility of electrical conductivity and thermo-electric monitoring methods is researched and coupled with detailed post-thermal/creep exposure characterization of microstructural changes and damage processes using state-of-the-art electron microscopy techniques, with the aim of establishing the most effective nondestructive materials evaluation technique for particular degradation modes in high-temperature alloys that are candidates for use in the Next Generation Nuclear Plant (NGNP) as well as providing the necessary mechanism-based underpinnings for relating the two. Only techniques suitable for practical application in situ will be considered. As the project evolves and results accumulate, we will also study the use of this technique for monitoring other GEN IV materials. Through the results obtained from this integrated materials behavior and NDE study, new insight will be gained into the best nondestructive creep and microstructure monitoring methods for the particular mechanisms identified in these materials. The proposed project includes collaboration with a national laboratory partner and the results will also serve as a foundation to guide the efforts of scientists in the DOE laboratory, university, and industrial communities concerned with the technological challenges of monitoring creep and microstructural evolution in materials planned to be used in Generation IV Nuclear Energy Systems.

36 MATERIALS SCIENCE↗

Characterization of topology optimized Ti-6Al-4V components using electron beam powder bed fusion

The use of manufacturing to generate topology optimized components shows promise for designers. However, designers who assume that additive manufacturing follows traditional manufacturing techniques may be misled due to the nuances in specific techniques. Since commercial topology optimization software tools are neither designed to consider orientation of the parts nor large variations in properties, the goal of this research is to evaluate the limitations of an existing commercial topology optimization software (i.e. Inspire®) using electron beam powder bed fusion (i.e. Arcam®) to produce optimized Ti-6Al-4V alloy components. Emerging qualification tools from Oak Ridge National Laboratory including in-situ near-infrared imaging and log file data analysis were used to rationalize the final performance of components. While the weight savings of each optimized part exceeded the initial criteria, the failure loads and locations proved instrumental in providing insight to additive manufacturing with topology optimization. In conclusion, this research has shown the need for a comprehensive understanding of correlations between geometry, additive manufacturing processing conditions, defect generation, and microstructure for characterization of complex components such as those designed by topology optimization.

42 ENGINEERING↗

Structural and photocatalytic studies on pure and Sn ion doped ZnO-graphene nanocomposites

Graphene based metal oxide nanocomposites have been widely used as a photocatalyst for the treatment of water pollutants. This work demonstrates the synthesis of graphene composite with pure and Sn ion doped-ZnO and their photocatalytic properties are reported. Structural studies were carried out by X-ray diffraction and Raman spectroscopy to confirm the formation of the nanocomposites. Microstructure was characterized by scanning electron microscopy showing rod shaped ZnO and the layer structured graphene in the ZnO-graphene composite. In comparison with the undoped ZnO-graphene composite, the Sn ion doped ZnO-graphene composite have shown better degradation of methyl orange dye that is about 99% of degradation. Band gap of the composite materials was calculated to be 3.36 eV from the UV-Vis result.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of V and Ta on the precipitation behavior of 12%Cr reduced activation ferrite/martensite steel

12%Cr reduced activation ferrite/martensite steels are promising candidate materials for good corrosion and irradiation resistance used for supercritical water-cooled reactor cladding and in-core components. V and Ta are considered to have improved the creep strength of high Cr steels by precipitating as MX phase. In this paper, a series of trial products microalloyed with V and V–Ta are produced, and the microstructure is characterized after quenching at 1050 °C and tempering at 780 °C by using TEM method to investigate the effect of these elements on the precipitation behavior of 12%Cr reduced activation ferrite/martensite steel. The results from both the experimental observations and thermodynamic and kinetic calculations reveal that V and V–Ta can promote the stable MX precipitation instead of M{sub 2}X, thus increasing the volume fraction of M{sub 23}C{sub 6}. Two-phase separation behavior of the (Ta, V)(C, N) carbonitride into a Ta(V)C(N) phase and a V(Ta)N(C) phase in 12Cr3WVTa steel is observed and further discussed. - Highlights: • Microalloyed with V and V-Ta can promote the precipitation of MX instead of M{sub 2}X. • The presence of delta-ferrite in microstructure affects the morphology of MX. • Two-phase separation of MX carbonitride was observed in 12Cr3WVTa steel.

36 MATERIALS SCIENCE↗

Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel

The good performance of supermartensitic stainless steels is strongly dependent on the volume fraction of retained austenite at room temperature. The present work investigates the effect of secondary tempering temperatures on this phase transformation and quantifies the amount of retained austenite by X-ray diffraction and saturation magnetization. The steel samples were tempered for 1 h within a temperature range of 600–800 °C. The microstructure was characterized using scanning electron microscopy and electron backscatter diffraction. Results show that the amount of retained austenite decreased with increasing secondary tempering temperature in both quantification methods. - Highlights: • The phase transformation during secondary tempering temperatures was observed. • Phases were quantified by X-ray diffraction and DC-saturation magnetization. • More retained austenite forms with increasing secondary tempering temperature. • The retained austenite is mainly located at the grain and lath boundaries.

36 MATERIALS SCIENCE↗

Sonochemical synthesis of luminescent CeCO{sub 3}OH one-dimensional quadrangular prisms

Orthorhombic single-crystalline cerium carbonate hydroxide (CeCO{sub 3}OH) with one-dimensional (1D) microstructures has been successfully synthesized by a facile sonochemical reaction between cerous nitrate and urea. These 1D microstructures were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM). The as-synthesized CeCO{sub 3}OH has uniform lengths and good dispersion. Synthetic parameters, such as the concentration of reagents, were found to have close relationship with the morphologies and sizes of the final products. The ultrasound-induced oriented attachment growth mechanism has been proposed for the possible formation mechanism of sample. Room-temperature photoluminescence of CeCO{sub 3}OH samples with different morphologies has also been investigated.

36 MATERIALS SCIENCE↗

Synchrotron experiment and simulation studies of magnesium-steel interface manufactured by impact welding

The effective weight reduction in the automotive industry by the wide adoption of lightweight magnesium (Mg) alloys demands high-quality joint between magnesium alloys and massively-used steels in order to wring the excess weight with strength and safety assurance. However, Mg-steel joint is difficult to achieve because there is no mutual solubility between magnesium and steel and huge disparity in physical properties. An impact-based welding method recently showed successful Mg-steel joining. In this work, the characteristics of Mg-steel interface joined by the impact welding method were investigated. Synchrotron high-energy X-ray computed tomography and diffraction were applied to characterize the microstructure across Mg-steel interface. Results revealed a deposit layer formed at the joint interface where Fe-rich particles spread deep into the Mg matrix. High-resolution 3D morphology of Mg-steel interface demonstrated the trapped pores and cracks inside the deposit layer. Finally, the formation of the deposit layer and the void/cracking evolution were analyzed by using finite element models. These findings provide insights into the immiscible Mg-steel joining process.

36 MATERIALS SCIENCE↗

Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties

During the electron beam melting (EBM) process, builds occur at temperatures in excess of 800°C for nickel-base superalloys such as Inconel 718. When coupled with the temporal differences between the start and end of a build, a top-to-bottom microstructure gradient forms. Characterized in this study is the microstructure gradient and associated tensile property gradient that are common to all EBM Inconel 718 builds. From the characteristic microstructure elements observed in EBM Inconel 718 material, the microstructure gradient can be classified into three distinct regions. Region 1 (top of a build) and is comprised of a cored dendritic structure that includes carbides and Laves phase within the interdendritic regions. Region 2 is an intermediate transition zone characterized by a diffuse dendritic structure, dissolution of the Laves phase, and precipitation of δ needle networks within the interdendritic regions. The bulk structure (Region 3) is comprised of a columnar grain structure lacking dendritic characteristics with δ networks having precipitated within the grain interiors. Mechanically at both 20°C and 650° C, the yield strength, ultimate tensile strength, and elongation at failure exhibit the general trend of increasing with increasing build height.

36 MATERIALS SCIENCE↗

Thermal properties of HfN-MoW surrogate cermet fuel for nuclear thermal propulsion

Here, the thermal properties of MoW-HfN, a surrogate cermet for MoW-UN nuclear thermal propulsion fuel, were characterized over a wide range of elevated temperatures. Thermal diffusivity, coefficient of thermal expansion (CTE), and heat capacity were measured. Optical and scanning electron microscopy were performed to characterize the microstructure and draw structure–property correlations. The thermal diffusivity was obtained using the laser flash method. Diffusivity values ranged from about 0.18 cm 2 /s at 200°C to 0.15 cm 2 /s at 1800°C. The CTE was measured using push-rod dilatometry up to 1600°C, giving values between 6.0 and 9.0 μm/m. A scientific rationalization of the effective material properties is made using the rule-of-mixtures and other effective properties models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Semiconductor- to metallic-like behavior in Bi thin films on KCl substrate

Bi thin films, with a thickness of 100 nm, are deposited by electron-beam evaporation on a freshly cleaved (100) KCl substrate. The substrate temperature during film growth (T{sub dep}) ranges from room temperature up to 170 °C. Films deposited at room temperature exhibit a maze-like microstructure typical of the rhombohedral (110) texture, as confirmed by X-ray diffraction. For T{sub dep} above 80 °C, a different microstructure appears, characterized by concentric triangular shapes corresponding to the trigonal (111) texture. Temperature dependence of the resistivity shows a transition from a semiconductor-like behavior for films deposited at room temperature to a metallic-like behavior for T{sub dep} above 80 °C. From magnetoresistance measurements between room temperature and 1.6 K, we extract the electron and hole mobilities, concentrations, and mean free paths, which allow to draw a complete picture of the transport properties of both types of films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of Molten Gallium on the Microstructure and Corrosion Behavior of Aluminum and Uranium-Aluminum Alloys for Used Nuclear Fuel Reprocessing

Test reactors around the world utilize highly enriched uranium fuel to achieve high neutron fluxes for materials testing. Once spent, the remaining uranium is a valuable resource for subsequent fuel fabrication. However, some of these test reactor cores consist of curved plate-type fuel elements, fabricated using aluminum alloy 6061 (AA6061) cladding to encapsulate a uranium-aluminum alloy (UAlx) fuel matrix. These assemblies require non-standard reprocessing approaches for uranium recovery, as aluminum dissolves readily in acidic solutions, generating large volumes of waste and complicating downstream chemical separations. In this work, we investigate a novel chemical decladding strategy based on the interaction between AA6061/UAlx and molten gallium (Ga). Ga is known to induce severe degradation of aluminum metal through liquid metal embrittlement (LME), even at relatively low Ga concentrations. By penetrating the aluminum crystal lattice, Ga disrupts grain cohesion and facilitates fracture or dissolution of the aluminum matrix. Thermodynamic analysis of the Al–Ga binary phase diagram suggests that Ga may offer a viable pathway to selectively weaken or dissolve the AA6061 cladding, and potentially the aluminum component of the UAlx fuel matrix within. To this end, parametric experiments were performed at 50 °C and 100 °C across a range of Al–Ga atomic fractions. At lower Al fractions, the AA6061 was completely molten after 2 hours of exposure to the Ga metal. In contrast, samples with higher Al fractions (0.9 Al, 0.1 Ga) contained residual solids after 2 hours, which were characterized by microstructural examination using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). These Al-Ga compositions were also evaluated using FactSage thermodynamic modeling to further elucidate the relationship between phase diagram behavior and LME.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A review of the effect of nanoclays on the fresh and hardened properties of cement-based materials

This paper provides an overview of the use of nanoclays in cement-based materials. The effect of nanoclays on shear rheological properties will be discussed, with a focus on structural build-up behavior. This macroscale flow behavior will then be tied to the effect of nanoclays on the fresh microstructure as characterized via in-situ particle size measurements and rheological techniques. This will provide insight on the mechanisms underlying the effect of nanoclays on fresh state properties through an improved understanding of their effect on flocculation and coagulation behavior. In addition, secondary effects nanoclays have on the hardening and hardened properties will also be discussed. Examples of casting applications in which nanoclays have been effectively utilized as rheological modifiers, i.e. reducing self-consolidating concrete formwork pressure, extrusion, semi-flowable concrete for slipform paving, and 3D concrete printing, will be presented. Finally, some thoughts on potential directions for future work will be shared.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on the contact properties of Ni/V/4H-SiC structure

A sandwich structure of Ni/V/4H-SiC was prepared and annealed at different temperatures from 650 °C to 1050 °C. The electrical properties and microstructures were characterized by transmission line method, X-ray diffraction, Raman spectroscopy and transmission electron microscopy. A low specific contact resistance of 3.3 × 10{sup -5} Ω·cm{sup 2} was obtained when the Ni/V contact was annealed at 1050 °C for 2 min. It was found that the silicide changed from Ni{sub 3}Si to Ni{sub 2}Si with increasing annealing temperature, while the vanadium compounds appeared at 950 °C and their concentration increased at higher annealing temperature. A schematic diagram was proposed to explain the ohmic contact mechanism of Ni/V/4H-SiC structure.

36 MATERIALS SCIENCE↗

Engineering Property Prediction Tools for Tailored Polymer Composite Structures

This report summarizes our FY 2009 research activities for the project titled:"Engineering Property Prediction Tools for Tailored Polymer Composite Structures." These activities include (i) the completion of the development of a fiber length attrition model for injection-molded long-fiber thermoplastics (LFTs), (ii) development of the a fatigue damage model for LFTs and its implementation in ABAQUS, (iii) development of an impact damage model for LFTs and its implementation in ABAQUS, (iv) development of characterization methods for fatigue testing, (v) characterization of creep and fatigue responses of glass-fiber/polyamide (PA6,6) and glass-fiber/polypropylene (PP), (vi) characterization of fiber length distribution along the flow length of glass/PA6,6 and glass-fiber/PP, and (vii) characterization of impact responses of glass-fiber/PA6,6. The fiber length attrition model accurately captures the fiber length distribution along the flow length of the studied glass-fiber/PP material. The fatigue damage model is able to predict the S-N and stiffness reduction data which are valuable to the fatigue design of LFTs. The impact damage model correctly captures damage accumulation observed in experiments of glass-fiber/PA6,6 plaques.Further work includes validations of these models for representative LFT materials and a complex LFT part.

36 MATERIALS SCIENCE↗

Influence of disorder on localization and density of states in amorphous carbon nitride thin films systems rich in {pi}-bonded carbon atoms

We discuss in this paper the evolution of both the density of states (DOS) located between the band-tail states and the DOS around the Fermi level N(E{sub F}) in amorphous carbon nitride films (a-CN{sub x}) as a function of the total nitrogen partial pressure ratio in the Ar/N{sub 2} plasma mixture. The films were deposited by three different deposition techniques and their microstructure was characterized using a combination of infrared and Raman spectroscopy and optical transmission experiments, completed with electrical conductivity measurements, as a function of temperature. The observed changes in the optoelectronic properties are attributed to the modification in the atomic bonding structures, which were induced by N incorporation, accompanied by an increase in the sp{sup 2} carbon bonding configurations and their relative disorder. The electrical conductivity variation was interpreted in terms of local effects on the nature and energy distribution of {pi} and {pi}* states.

36 MATERIALS SCIENCE↗