Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Modelling the ejection of primary aerosols during the fast pyrolysis of biomass anisotropic particles

A model for the fast pyrolysis of anisotropic biomass particles is presented which considers bubbling dynamics within the liquid intermediate phase (metaplast) and aerosol ejection from this phase. The model employs the population balance equation and the method of moments to estimate the production rate and resultant size distribution of aerosol ejections, incorporating a detailed CRECK reaction mechanism, and considers the effect of anisotropic biomass microstructure on the intraparticle transport of mass and energy. Here, this study investigates the impact of particle size, heating rate (heat transfer coefficient), and lignocellulosic composition on aerosol ejection. The model predicts that, at high heating rates (convective heat transfer coefficient of 359 W/m 2 .K), aerosols can contribute over 20% to the heavy fraction yield in bio-oil for small particles (1 mm diameter, 4 mm length). The model can predict aerosol size distribution and surface area, indicating an average size of 20 μm for bubbles and 5 μm for aerosols during increased bubble production and aerosol ejection rates. These findings are consistent with prior experimental results and provide essential information for future modeling of extra-particle reactions of the aerosols as they progress through the reactor.

09 BIOMASS FUELS↗

The evolution of instabilities in the axisymmetric jet. I - The linear growth of disturbances near the nozzle. II - The flow resulting from the interaction between two waves

The modal distribution of coherent structures evolving near the nozzle of a circular jet was studied experimentally and theoretically, with particular attention given to the effects produced on the instability modes by transverse curvature, flow divergence, inhomogeneous inflow conditions, and the detailed shape of the mean velocity profile. Experiments were performed using a specially constructed air-jet facility; hot-wire anemometers were used in conjunction with Disa Model 55P11 sensors for flow measurements. The linear model used as a transfer function is capable of predicting the spectral distribution of the velocity perturbations in a jet. Consideration was also given to studies of leading nonlinear interactions generated by waves externally superimposed on an axisymmetric jet; theoretical predictions were verified experimentally.

Cohen, J.↗

Electric Field Effects on Fiber Alignment Using an Auxiliary Electrode During Electrospinning

Control of electrospun fiber placement and distribution was investigated by examining the effect of electric field parameters on the electrospinning of fibers. The experimental set-up used in this study eliminated the bending instability and whipping, allowing the jet to be modeled as a stable trajectory. Coupling of experimental and computational results suggests the potential for predicting aligned fiber distribution in electrospun mats.

Carnell, Lisa S.↗

Coordinated Steering Angle and Yaw Moment Distribution to Increase Vehicle Regenerative Energy in Autonomous Driving

This paper presents an algorithm that increases vehicle regenerative braking energy recovery in autonomous driving by leveraging connected and automated vehicle (CAV) technology. Autonomous vehicles may select different maneuvers to increase kinetic energy recovery during deceleration. In the proposed algorithm, the cornering resistance that influences regenerative energy and energy consumption is defined in terms of steering angle during regenerative braking. In particular, a model predictive controller that distributes control inputs of the vehicle is adopted to reduce the cornering resistance for increasing regenerative braking torque. Utilizing the information from CAV technology, this algorithm enables the vehicle to safely conduct braking while increasing its regenerative energy recovery. CarSim-Simulink joint simulations demonstrate the effectiveness of the proposed method.

Choi, Junghyun↗

Aerodynamics of Slender Bodies at Mach Number of 3.12 and Reynolds Numbers from 2 x 10(exp 6) to 15 x 10(exp 6) V : Aerodynamic Load Distributions for a Series of Four Boattailed Bodies

Pressure distributions for a series of four boattailed bodies of revolution were obtained and compared with theory for a Mach number of 3.12, a Reynolds number range of 2 x 10 to 6th power to 14 x 10 to the 6th power, and angles of attack from zero to 9 degrees. Second-order theory adequately predicted the pressure distribution for regions free of the effects of cross-flow separation.

Moskowitz, Barry↗

Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics--based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.

Kulkarni, Shank S.↗

Numerical and experimental investigation of DNAPL removal mechanisms in a layered porous medium by means of soil vapor extraction

The purpose of this work is to identify the mechanisms that govern the removal of carbon tetrachloride (CT) during soil vapor extraction (SVE) by comparing multiphase flow simulations with a detailed data set from a well-defined two-dimensional flow cell experiment. The flow cell was packed with two sandy soils including an embedded fine-grained sand layer. Gas concentrations at the outlet of the flow cell and 15 sampling ports inside the flow cell were measured during SVE. A dual-energy gamma radiation system was used to measure an initial NAPL saturation profile in a fine-grained sand layer. Imaging result from a dual-energy gamma radiation system with dyed CT mark along CT migration was used to construct the distribution of initial NAPL saturation in the flow cell for input to numerical simulations. Gas concentration results and photographs during SVE were compared to simulation results using a continuum-based multiphase flow simulator, STOMP (Subsurface Transport Over Multiple Phases). The measured effluent gas concentration decreased quickly at first, and then started to decrease gradually, resulting in long-term tailing. CT mass was removed quickly in coarse sand, followed by a slow removal from the fine-grained sand layer. An analytical solution for a one-dimensional advection and first-order volatilization model matched the tailing well with two fitting parameters. However, given detailed knowledge of the permeability field and initial NAPL distribution, we can predict the tailing and gas concentration profiles at sampling ports using equilibrium NAPL volatilization. NAPL flow occurs in the presence of free NAPL, and must be accounted for to accurately predict NAPL removal during the SVE experiment. The model prediction was accurate within the uncertainty of the measured or literature derived parameters (i.e., dispersivity and soil parameters). This study provides insights into the physical mechanisms of NAPL removal from a low permeability zone, and use of the local equilibrium assumption for NAPL volatilization during SVE. In addition, this study demonstrates that lack of detailed information regarding NAPL distribution and heterogeneity pattern lead overall NAPL removal to a kinetically controlled system at a 2-D flow cell scale.

54 ENVIRONMENTAL SCIENCES↗

Fiber motion in highly confined flows of carbon fiber and non-Newtonian polymer [Advanced modeling of non-Newtonian polymer and carbon fibers]

Inks compounded of short carbon fibers suspended in polymer resin can be extruded to produce composite materials during additive manufacturing or 3D printing processes. The flow process induces anisotropic orientation of the fibers which is set into the matrix and significantly affects the mechanical and physical properties of the final product. Therefore, the flow of fiber suspensions needs to be understood in order to predict the orientation distribution of the fibers during such manufacturing processes. There is still a lack of knowledge for extrusion of the complex mixture of a non-Newtonian polymer containing a high-volume fraction of fibers with high fiber aspect ratio, where both inter-particle, fluid-particle and fiber-wall interactions are computationally evaluated. This paper presents predictive numerical simulations and experimental results of such confined flow in a concentrated regime. The code is based on Lagrange multiplier technique and resolves each particle and interaction between the fibers and surrounding fluid and nozzle walls. We investigate numerically how the fiber length impacts the fiber alignment during extrusion. We found that a fiber length above 67% of the nozzle's diameter induces dramatic change in the fiber flow, causing fibers to concentrate at the nozzle boundaries with very low concentration of fibers in the center of the nozzle. It was found that the best fiber alignment is reached for fiber lengths equal to 40–50% of the nozzle diameters. Numerical findings are supported by experimental results. In conclusion, this work improves understanding of fiber orientation during 3D printing and is an important milestone for the prediction of the complex mechanical properties of additively manufactured fiber composites.

36 MATERIALS SCIENCE↗

Pyroelectric field assisted ion migration induced by ultraviolet laser irradiation and its impact on ferroelectric domain inversion in lithium niobate crystals

The impact of UV laser irradiation on the distribution of lithium ions in ferroelectric lithium niobate single crystals has been numerically modelled. Strongly absorbed UV radiation at wavelengths of 244–305 nm produces steep temperature gradients which cause lithium ions to migrate and result in a local variation of the lithium concentration. In addition to the diffusion, here the pyroelectric effect is also taken into account which predicts a complex distribution of lithium concentration along the c-axis of the crystal: two separated lithium deficient regions on the surface and in depth. The modelling on the local lithium concentration and the subsequent variation of the coercive field are used to explain experimental results on the domain inversion of such UV treated lithium niobate crystals.

36 MATERIALS SCIENCE↗

A NUMERICAL STUDY OF DIFFUSIVE COSMIC-RAY TRANSPORT WITH ADIABATIC FOCUSING

Focused particle transport in a nonuniform large-scale magnetic field is investigated numerically in the case of isotropic pitch-angle scattering. Evolving particle density profiles and distribution moments are computed from solutions of a system of stochastic differential equations, equivalent to the original Fokker-Planck equation for the particle distribution. Conflicting analytical predictions for the transport coefficients in the diffusion limit, independently calculated by Beeck and Wibberenz and Shalchi, are compared with the numerical results. The reasons for the discrepancies among the analytical and numerical treatments, as well as the general limitations of the diffusion model, are discussed. The telegraph equation, derived in a higher-order expansion of the particle distribution function, is shown to describe the particle transport much more accurately than the diffusion model, especially ahead of a moving density pulse.

79 ASTRONOMY AND ASTROPHYSICS↗

Neural network modeling of in situ fluid-filled pore size distributions in subsurface shale reservoirs under data constraints

Subsurface nuclear magnetic resonance (NMR) logs acquired in the wellbore environment are sensitive to fluid-filled pore size distribution, fluid mobility, permeability, and porosity in the near-wellbore reservoir volume. NMR response of a formation layer is processed to extract the T2 distribution, which approximates the fluid-filled pore size distribution. NMR logs are acquired in limited number of wells due to financial and operational challenges, which adversely affects reservoir characterization. We developed here two neural-network-based machine learning techniques, long short-term memory (LSTM) network and variational autoencoder with a convolutional layer (VAEc) network, to process the ‘easy-to-acquire’ formation mineral and fluid saturation logs to generate synthetic NMR T2 distributions in the absence of ‘hard-to-acquire’ NMR T2 distribution log. Both the predictive models are trained and tested on limited wireline log measurements randomly selected from a 300-ft depth interval of the Bakken shale formation. Synthesis performances of LSTM and VAEc models in terms of R 2 are 0.78 and 0.75, respectively. Noise is inevitable in logging data due to the complex wellbore and formation conditions. Notably, both the predictive models robustly synthesize the fluid-filled pore size distributions in the presence of 50% noise in input logs and 30% noise in training T2 data. The performance of the proposed methodology improves with access to larger volume of training data from other formation types. The proposed method is critical to the synthesis of in situ fluid-filled pore size distributions in shale formations under data constraints due to financial and operational challenges.

58 GEOSCIENCES↗

Importance of bulk excitations and coherent electron-photon-phonon scattering in photoemission from PbTe(111): Ab initio theory with experimental comparisons

This paper presents a fully ab initio many-body photoemission framework that includes coherent three-body electron-photon-phonon scattering to predict the transverse momentum distributions and the mean transverse energies (MTEs) of bulk photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the transverse momentum distribution of photoelectrons emitted from single crystals. For example, initial predictions based on density-functional theory calculations of effective electron masses suggested that the (111) surface of PbTe would produce very small MTEs (≤ 15 meV), whereas our experiments yielded MTEs ten to twenty times larger than these predictions and also exhibited a lower photoemission threshold than predicted. The ab initio framework presented in this paper correctly reproduces both the magnitude of the MTEs from our measurements in PbTe(111) and the observed photoemission below the predicted threshold. Our results show that both photoexcitations into states that propagate in the bulk of the material and coherent many-body electron-photon-phonon scattering processes, which initial predictions ignored, play surprisingly important roles in photoemission from PbTe(111). Lastly, from the lessons learned, we recommend a procedure for rapid computational screening of potential single-crystal photocathodes for applications in next-generation ultrafast electron diffraction and X-ray free-electron lasers, which will enable significant advances in condensed matter research.

36 MATERIALS SCIENCE↗

ON THE ASSEMBLY OF THE MILKY WAY DWARF SATELLITES AND THEIR COMMON MASS SCALE

We use a particle tagging technique to dynamically populate the N-body Via Lactea II high-resolution simulation with stars. The method is calibrated using the observed luminosity function of Milky Way (MW) satellites and the concentration of their stellar populations, and self-consistently follows the accretion and disruption of progenitor dwarfs and the buildup of the stellar halo in a cosmological 'live host'. Simple prescriptions for assigning stellar populations to collisionless particles are able to reproduce many properties of the observed MW halo and its surviving dwarf satellites, like velocity dispersions, sizes, brightness profiles, metallicities, and spatial distribution. Our model predicts the existence of approximately 1850 subhalos harboring 'extremely faint' satellites (with mass-to-light ratios >5 Multiplication-Sign 10{sup 3}) lying beyond the Sloan Digital Sky Survey detection threshold. Of these, about 20 are 'first galaxies', i.e., satellites that formed a stellar mass above 10 M{sub Sun} before redshift 9. The 10 most luminous satellites (L > 10{sup 6} L{sub Sun }) in the simulation are hosted by subhalos with peak circular velocities today in the range V{sub max} = 10-40 km s{sup -1} that have shed between 80% and 99% of their dark mass after being accreted at redshifts 1.7 < z < 4.6. The satellite maximum circular velocity V{sub max} and stellar line-of-sight velocity dispersion {sigma}{sub los} today follow the relation V{sub max} = 2.2{sigma}{sub los}. We apply a standard mass estimation algorithm based on Jeans modeling of the line-of-sight velocity dispersion profiles to the simulated dwarf spheroidals and test the accuracy of this technique. The inner (within 300 pc) mass-luminosity relation for currently detectable satellites is nearly flat in our model, in qualitative agreement with the 'common mass scale' found in MW dwarfs. We do, however, predict a weak, but significant positive correlation for these objects: M{sub 300}{proportional_to}L {sup 0.088{+-}0.024}.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of phase distribution phenomena in microgravity environments

In the past one of NASA's primary emphasis has been on identifying single and multiphase flow experiments which can produce new discoveries that are not possible except in a microgravity environment. While such experiments are obviously of great scientific interest, they do not necessarily provide NASA with the ability to use multiphase processes for power production and/or utilization in space. The purpose of the research presented in this paper is to demonstrate the ability of multidimensional two-fluid models for bubbly two-phase flow to accurately predict lateral phase distribution phenomena in microgravity environments. If successful, this research should provide NASA with mechanistically-based analytical methods which can be used for multiphase space design and evaluation, and should be the basis for future shuttle experiments for model verification.

Lahey, Richard, Jr.↗

Three-dimensional Navier-Stokes analysis of turbine passage heat transfer

The three-dimensional Reynolds-averaged Navier-Stokes equations are numerically solved to obtain the pressure distribution and heat transfer rates on the endwalls and the blades of two linear turbine cascades. The TRAF3D code which has recently been developed in a joint project between researchers from the University of Florence and NASA Lewis Research Center is used. The effect of turbulence is taken into account by using the eddy viscosity hypothesis and the two-layer mixing length model of Baldwin and Lomax. Predictions of surface heat transfer are made for Langston's cascade and compared with the data obtained for that cascade by Graziani. The comparison was found to be favorable. The code is also applied to a linear transonic rotor cascade to predict the pressure distributions and heat transfer rates.

Ameri, Ali A.↗

Bypass Flow Resistance in Prismatic Gas-Cooled Nuclear Reactors

Available computational fluid dynamics (CFD) predictions of pressure distributions in the vertical bypass flow between blocks in a prismatic gas-cooled reactor (GCR) have been analyzed to deduce apparent friction factors and loss coefficients for systems and network codes. We performed calculations for vertical gap spacings "s" of 2, 6 and 10 mm, horizontal gaps between the blocks of two mm and two flow rates, giving a range of gap Reynolds numbers Re Dh of about 40 to 5300. Laminar predictions of the fully-developed friction factor f fd were about three to ten per cent lower than the classical infinitely-wide channel In the entry region, the local apparent friction factor was slightly higher than the classic idealized case but the hydraulic entry length L hy was approximately the same. The per cent reduction in flow resistance was greater than the per cent increase in flow area at the vertical corners of the blocks. The standard k-ϵ model was employed for flows expected to be turbulent. Its predictions of f fd and flow resistance were significantly higher than direct numerical simulations for the classic case; the value of L hy was about thirty gap spacings. Initial quantitative information for entry coefficients and loss coefficients for the expansion-contraction junctions between blocks is also presented. Our study demonstrates how CFD predictions can be employed to provide integral quantities needed in systems and network codes.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Noncompact source effect on the prediction of tone noise from a fan rotor

A comparison is made between the conventional compact source prediction for airfoil sound radiation and the rigorous prediction based on distributed sources along the airfoil chord. The theoretical analysis performed is for a single airfoil and cascaded airfoils immersed in a sinusoidally varying convected gust field. The pressure field around a single airfoil in supersonic gust flows is also studied. In subsonic flows the phase change of unsteady lift along the chord of a single airfoil reduces the sound radiation significantly in the upstream direction and increases the downstream radiation compared to the compact source prediction. In supersonic flows the compact source prediction gives substantial error in the region just behind the Mach wedge originating from the leading edge, while it approaches the noncompact source results far downstream from the airfoil. In the case of cascaded airfoils the compact source prediction overestimates the upstream radiation by as much as 20 dB depending on frequency and interblade phase.

Kaji, S.↗