Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Vegetation assessment using a combination of visible, near-IR and thermal-IR AVHRR data

Twelve hour temperature difference (thermal inertia) maps generated by rectifying and registering ascending (day) passes and descending (night) passes of the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR) are compared to vegetation index maps generated from the visible and near IR data from the day pass of that satellite. There appears to be significant and unique information concerning surface characteristics in the temperature difference data on the 1 km scale of the AVHRR. A scatter diagram is provided which shows the pattern of day-night temperature difference compared to vegetation index for irrigated agriculture, dry rangeland, lakes, wet areas and burned rangeland. A detailed description of the techniques employed to provide the day-night temperature maps is provided.

Whitehead, V. S.↗

Mars Observer orbital accuracy analysis

Attention is given to the orbital accuracy of the Mars Observer (MO) spacecraft throughout its 687 days of mapping (scheduled to commence in 1991). The MO's short period and near circular orbit necessitate a multiorbit analysis in which the spacecraft's motion is strongly perturbed by the local and global gravity field of Mars. This analysis attests to the feasibility of achieving an orbital position accuracy at the level of 2-3 km within the data interval. It is found that Very Long Baseline Interferometric data can rectify a situation in which the position accuracy degrades significantly.

Esposito, P. B.↗

Technology for satellite power conversion

The work is this reporting period was concentrated on electronically calibrating the bolometer detectors. The calibration is necessary for two reasons: first, the power delivered to the rectifying circuit must be known in order to choose a diode with the appropriate barrier height, and second, the power captured by the antenna must be measured if the efficiency of the rectenna is to be divided into antenna efficiency and rectification efficiency. The millimeter wave region operation of the bolometers was simulated with a VHF (10 to 90 MHz) test signal. These detectors are accurate to within roughly 10%. The typical responsivity of the bolometers is 10 volts/watt and the NEP at 20 Hz is 5 times 10 to the minus 9th power W(Hz)-1/2.

Gouker, M. A.↗

Rectenna Technology Program: Ultra light 2.45 GHz rectenna 20 GHz rectenna

The program had two general objectives. The first objective was to develop the two plane rectenna format for space application at 2.45 GHz. The resultant foreplane was a thin-film, etched-circuit format fabricated from a laminate composed of 2 mil Kapton F sandwiched between sheets of 1 oz copper. The thin-film foreplane contains half wave dipoles, filter circuits, rectifying Schottky diode, and dc bussing lead. It weighs 160 grams per square meter. Efficiency and dc power output density were measured at 85% and 1 kw/sq m, respectively. Special testing techniques to measure temperature of circuit and diode without perturbing microwave operation using the fluoroptic thermometer were developed. A second objective was to investigate rectenna technology for use at 20 GHz and higher frequencies. Several fabrication formats including the thin-film scaled from 2.45 GHz, ceramic substrate and silk-screening, and monolithic were investigated, with the conclusion that the monolithic approach was the best. A preliminary design of the monolithic rectenna structure and the integrated Schottky diode were made.

Brown, William C.↗

Description of a 20 kilohertz power distribution system

A single phase, 440 VRMS, 20 kHz power distribution system with a regulated sinusoidal wave form is discussed. A single phase power system minimizes the wiring, sensing, and control complexities required in a multi-sourced redundantly distributed power system. The single phase addresses only the distribution links multiphase lower frequency inputs and outputs accommodation techniques are described. While the 440 V operating potential was initially selected for aircraft operating below 50,000 ft, this potential also appears suitable for space power systems. This voltage choice recognizes a reasonable upper limit for semiconductor ratings, yet will direct synthesis of 220 V, 3 power. A 20 kHz operating frequency was selected to be above the range of audibility, minimize the weight of reactive components, yet allow the construction of single power stages of 25 to 30 kW. The regulated sinusoidal distribution system has several advantages. With a regulated voltage, most ac/dc conversions involve rather simple transformer rectifier applications. A sinusoidal distribution system, when used in conjunction with zero crossing switching, represents a minimal source of EMI. The present state of 20 kHz power technology includes computer controls of voltage and/or frequency, low inductance cable, current limiting circuit protection, bi-directional power flow, and motor/generator operating using standard induction machines. A status update and description of each of these items and their significance is presented.

Hansen, I. G.↗

Monsoon flood boundary delineation and damage assessment using space borne imaging radar and Landsat data

Space-borne synthetic aperture radar (SAR) data acquired by the Shuttle Imaging Radar-B (SIR-B) Program and Landsat Multispectral Scanner Subsystem (MSS) Data from Landsat 4 were used to map flood boundaries for the assessment of flood damage in the Peoples Republic of Bangladesh. The cloud penetrating capabilities of the L-band radar provided a clear picture of the hydrologic conditions of the surface during a period of inclement weather at the end of the wet phase of the 1984 monsoon. The radar image data were digitally processed to geometrically rectify the pixel geometry and were filtered to subdue radar image speckle effects. Contrast enhancement techniques and density slicing were used to create discrete land-cover categories corresponding to surface conditions present at the time of the Shuttle overflight. The radar image classification map was digitally registered to a spectral signature classification map of the area derived from Landsat MSS data collected two weeks prior to the SIR-B mission. Classification accuracy comparisons were made between the radar and MSS classification maps, and flood boundary and flood damage assessment measurements were made with the merged data by adding the classifications and inventorying the land-cover classes inundated at the time of flooding.

Imhoff, Marc L.↗

Automated rectification and geocoding of SAR imagery

An automated post-processing system has been developed for rectification and geocoding of SAR (Synthetic Aperture Radar) imagery. The system uses as input a raw uncorrected image from the operational SAR correlator, and produces as a standard output a rectified and geocoded product. The accurate geolocation of SAR image pixels is provided by a spatial transformation model which maps the slant range-azimuth SAR image pixels into their location on a prespecified map grid. This model predicts the geodetic location of each pixel by utilizing: the sensor platform position; a geoid model; the parameters of the data collection system and the processing parameters used in the SAR correlator. Based on their geodetic locations, the pixels are mapped by using the desired cartographic projection equations. This rectification and geocoding technique has been tested with Seasat and SIR-B images. The test results demonstrate absolute location uncertainty of less than 50 m and relative distortion (scale factor and skew) of less than 0.1 percent relative to local variations from the assumed geoid.

Kwok, R.↗

Arc lamp power supply using a voltage multiplier

A power supply is provided for an arc discharge lamp which includes a relatively low voltage high current power supply section and a high voltage starter circuit. The low voltage section includes a transformer, rectifier, variable resistor and a bank of capacitors, while the starter circuit comprises several diodes and capacitors connected as a Cockcroft-Walton multiplier. The starting circuit is effectively bypassed when the lamp arc is established and serves to automatically provide a high starting voltage to re-strike the lamp arc if the arc is extinguished by a power interruption.

Leighty, Bradley D.↗

Growth and characterization of molecular beam epitaxial GaAs layers on porous silicon

GaAs layers have been grown on porous silicon (PS) substrates with good crystallinity by molecular beam epitaxy. In spite of the surface irregularity of PS substrates, no surface morphology deterioration was observed on epitaxial GaAs overlayers. A 10-percent Rutherford backscattering spectroscopy minimum channeling yield for GaAs-on-PS layers as compared to 16 percent for GaAs-on-Si layers grown under the same condition indicates a possible improvement of crystallinity when GaAs is grown on PS. Transmission electron microscopy reveals that the dominant defects in the GaAs-on-PS layers are microtwins and stacking faults, which originate from the GaAs/PS interface. GaAs is found to penetrate into the PS layers. n-type GaAs/p-type PS heterojunction diodes were fabricated with good rectifying characteristics.

Lin, T. L.↗

Gigarad-tolerant power switches and memory elements

A new class of silicon devices operating without p-n junctions has been studied for radiation hardness. The electric field in these devices is uniform over most of the device, thus causing high-voltage breakdown to increase with electrode spacing. Deep acceptor levels are created in the silicon by diffusing gold atoms into the lattice, or by electron radiation. These acceptor levels, near the center of the band gap, trap out electrons so that the low resistivity of the n-type doped wafer can be raised to intrinsic resistivity. Switching between a high-resistivity state at low currents and a low-resistivity state at high currents occurs at a definite threshold voltage, exhibiting characteristics similar to silicon-controlled rectifiers. Compensating 0.1 ohm-meter (10 ohm-cm) silicon wafers requires electron fluxes of 10 to the 23rd electrons per square meter (10 to the 19th electrons per square centimeter). Experiments demonstrating gamma tolerance to 1 Gigarad(Si) are described. Calculations for maximum tolerable neutron fluence are shown, and a phenomenological explanation for these results is presented.

Joyner, W. T.↗

Design of a nonsingular Level 2.5 second-order closure model for the prediction of atmospheric turbulence

The suitability of applying the Mellor and Yamada (1974, 1982) Level 2.5 second-order turbulence closure model to general circulation models is investigated by examining not only the scheme's simulation of fully (or nearly fully) developed turbulence, but also its simulation of rapidly growing or strongly decaying turbulence. The behavior of the model is presented over its entire domain of definition, with special consideration given to the pathologies of the model. The model is then modified for the case of growing turbulence to rectify some of its physical shortcomings for that case, and to remove the pathologies that prohibit its use in a general circulation model. The performance of the modified Level 2.5 model is compared to the performance of various other modified versions through the numerical simulation for a growing convective PBL. The results show that the modified Level 2.5 model is a viable candidate for the prediction of turbulence and the simulation of the PBL in general circulation models.

Helfand, H. M.↗

Cartographic feature extraction with integrated SIR-B and Landsat TM images

A digital cartographic multisensor image database of excellent geometry and improved resolution was created by registering SIR-B images to a rectified Landsat TM reference image and applying intensity-hue-saturation enhancement techniques. When evaluated against geodetic control, RMSE(XY) values of approximately + or - 20 m were noted for the composite SIR-B/TM images. The completeness of cartographic features extracted from the composite images exceeded those obtained from separate SIR-B and TM image data sets by approximately 10 and 25 percent, respectively, indicating that the composite images may prove suitable for planimetric mapping at a scale of 1:100,000 or smaller. At present, the most effective method for extracting cartographic information involves digitizing features directly from the image processing display screen.

Welch, R.↗

The generalized transmission error of spiral bevel gears

The traditional definition of the transmission error of parallel-axis gear pairs is reviewed and shown to be unsuitable for characterizing the deviation from conjugate action of bevel gear pairs for vibration excitation characterization purposes. This situation is rectified by generalizing the concept of the transmission error of parallel-axis gears to a three-component transmission error for spiral bevel gears of nominal spherical involute design. A general relationship is derived which expresses the contributions to the three-component transmission error from each gear of a meshing spiral bevel pair as a linear transformation of the six coordinates that describe the deviation of the shaft centerline position of each gear of the pair from the position of its rigid perfect involute counterpart.

Mark, W. D.↗

Validating the airborne and ground based components of a differential GPS system

A differential GPS mechanization of an external data link concept under development at NASA Ames Research Center is discussed. The system is intended to evaluate the use of differential GPS to support helicopter approach operation. Analytical techniques for static testing and evaluation of the system hardware and software performance in real time are described. Several techniques that have been used to detect and rectify a specific problem encountered during the tests are dicussed. An example of flight test results using the validated system is provided.

Edwards, F. G.↗

Satellite radar interferometry - Two-dimensional phase unwrapping

Interferometric synthetic aperture radar observations provide a means for obtaining high-resolution digital topographic maps from measurements of amplitude and phase of two complex radar images. The phase of the radar echoes may only be measured modulo 2 pi; however, the whole phase at each point in the image is needed to obtain elevations. An approach to 'unwrapping' the 2 pi ambiguities in the two-dimensional data set is presented. It is found that noise and geometrical radar layover corrupt measurements locally, and these local errors can propagate to form global phase errors that affect the entire image. It is shown that the local errors, or residues, can be readily identified and avoided in the global phase estimation. A rectified digital topographic map derived from the unwrapped phase values is presented.

Goldstein, Richard M.↗

Advances in cryogenic engineering. Volume 33 - Proceedings of the Cryogenic Engineering Conference, Saint Charles, IL, June 14-18, 1987

Papers are presented on superconductivity applications including magnets, electronics, rectifiers, magnet stability, coil protection, and cryogenic techniques. Also considered are insulation, heat transfer to liquid helium and nitrogen, heat and mass transfer in He II, superfluid pumps, and refrigeration for superconducting systems. Other topics include cold compressors, refrigeration and liquefaction, magnetic refrigeration, and refrigeration for space applications. Papers are also presented on cryogenic applications, commercial cryogenic plants, the properties of cryogenic fluids, and cryogenic instrumentation and data acquisition.

Fast, R. W.↗

Deterioration of ZnO/SiO2 diode packages in high humidity

A case study is reported in which the ZnO/SiO2 glass used to package a power rectifier combined with the design to produce a catastropic corrosion failure of the system. Metallic Zn inclusions, present in the glass, played a critical role in creating a conductive path for corrosion currents. Actual equipment failure was the result of an open circuit trace created by corrosion. It is concluded that the presence of Zn inclusions in the glass of this type of package may result in long-term reliability problems for equipment used in high humidity environments.

Evans, John↗

Relationship Between Latchup And Transistor Current Gain

Theoretical study takes new look at current-vs.-voltage behavior of silicon controlled rectifiers (SCR's), four-layer complementary metal oxide/semiconductor (CMOS) devices, and similar devices susceptible to latchup. For purposes of analysis, "latchup" denotes transition of such device from lower-current-conducting steady state to distinct higher-current-conducting steady state. Focuses upon conventional two-couple-transistor model of one-dimensional SCR. Although model gives oversimplified view of latchup in CMOS circuits, useful for qualitative predictions of electrical characteristics.

Edmonds, Larry D.↗