Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mechanical cosmology: Simulating scalar fluctuations in expanding universes using synthetic mechanical lattices

Inspired by recent advances in observational astrophysics and continued explorations in the field of analog gravity, we discuss the prospect of simulating models of cosmology within the context of synthetic mechanical lattice experiments. We focus on the physics of expanding universe scenarios described by the Friedmann-Lemaître-Robertson-Walker (FLRW) metric. Specifically, quantizing scalar fluctuations in a background FLRW spacetime leads to a quadratic bosonic Hamiltonian with temporally varying pair production terms. Here we present a mapping that provides a one-to-one correspondence between these classes of cosmology models and feedback-coupled mechanical oscillators. As proof of principle, we then perform experiments on a synthetic mechanical lattice composed of such oscillators. We simulate two different FLRW expansion scenarios with universes dominated by vacuum energy and matter and discuss our experimental results. Published by the American Physical Society 2025

Rhyno, Brendan (ORCID:0000000235266998)↗
DOE OSTI2020

Corn stover harvest reduces soil CO 2 fluxes but increases overall C losses

Abstract Harvesting corn ( Zea mays L.) stover for use as bioenergy feedstock may provide short‐term economic benefits and perhaps improve grain yield in continuous corn systems, but excessive stover removal may lead to long‐term depletion of soil C stocks. To better quantify the impacts of stover harvest on the soil C balance, we investigated CO 2 fluxes under three harvest treatments (none, moderate, and high) in three continuous corn systems: (a) no tillage and no biochar applications, (b) chisel plowing with biochar amendments, and (c) chisel plowing without biochar amendments were quantified. We sampled static chambers 14, 13, and 15 times in 2010, 2011, and 2012, respectively, and the measurements were used to calibrate the Agricultural Production Systems sIMulator model. Although CO 2 ‐C emissions did not differ among the three systems, both moderate (approximately 30%) and high (approximately 60%) stover removal rates reduced simulated CO 2 ‐C emissions by nearly 10% and more than 22%, respectively. Despite these reductions in CO 2 flux, the sum of CO 2 ‐C and stover C exceeded CO 2 ‐C losses in those plots without stover removal. This finding suggested soil C depletion was occurring for the soil and crop management practices used, even though depletion was not evident after 3 years. Application of biochar increased soil C levels, suggesting it may be able to offset some C losses. We conclude that for sustainable, highly productive agroecosystems that include stover harvest, all agronomic practices must be optimized to minimize C losses and maintain soil quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Distributed Generation Market Demand (dGen) model

The Distributed Generation Market Demand (dGen) model simulates customer adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the United States or other countries through 2050. The dGen model can be used for identifying the sectors, locations, and customers for whom adopting DERs would have a high economic value, for generating forecasts as an input to estimate distribution hosting capacity analysis, integrated resource planning, and load forecasting, and for understanding the economic or policy conditions in which DER adoption becomes viable, and for illustrating sensitivity to market and policy changes such as retail electricity rate structures, net energy metering, and technology costs.

Array↗
DOE OSTI2023

Using Kinetic Entropy to Understand Dissipation in Re-connection and Turbulence

This report summarizes results obtained at Space Science Institute (SSI) under a collaborative project funded by the NSF-DOE partnership in Basic Plasma Physics. The overall goal of the project was to perform a study of kinetic entropy as a diagnostic of dissipation in several archetypal models, such as magnetic reconnection and decaying plasma turbulence. The specific task of the SSI group was to perform collisionless and weakly collisional Particle-in-Cell (PIC) simulations modeling these systems. Overall, the project has demonstrated that, as expected, kinetic entropy carries an imprint of weakly collisional processes commonly thought to be associated with dissipation and thus provides an important diagnostic of dissipation. Specific entropy-related metrics have been proposed that could be used as quantitative measures of dissipation. These metrics have been implemented as diagnostics in PIC simulations and their utility, as well as relation to other, previously proposed, measures of dissipation have been demonstrated. Further, PIC simulations were used to investigate a general question of how energy is dissipated in magnetized weakly collisional turbulence in both non-relativistic and relativistic plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Simplified Numerical Approach to Characterize the Thermal Response of a Moving Bed Solar Reactor

Abstract Concentrated solar thermochemical storage in the form of a zero-emission fuel is a promising option to produce long-duration energy storage. Solar fuel is produced using a cavity reactor that captures concentrated solar radiation from a solar field of heliostats. In this paper, heat transfer model of a tubular plug-flow reactor designed and manufactured for a solar fuel production is presented. Experimental data collected from a fixed bed tubular reactor testing are used for model comparison. The system consists of an externally heated tube with counter-current flowing gas and moving solid particles as the heated media. The proposed model simulates the dynamic behavior of temperature profiles of the tube wall, gas, and particles under various gas flowrates and residence times. The heat transfer between gas–wall, solid particle–wall, and gas–solid particle is numerically studied. The model results are compared with the results of experiments done using a 4 kW furnace with a 150 mm heating zone surrounding a horizontal alumina tube (reactor) with 50.8 mm outer diameter and thickness of 3.175 mm. Solid fixed particles of magnesium manganese oxide (MgMn2O4) with the size of 1 mm are packed within the length of 250 mm at the center of the tube length. Simulation results are assessed with respect to fixed bed experimental data for four different gas flowrates, namely, 5, 10, 15, and 20 standard liters per minute of air, and furnace temperatures in the range of 200–1200 °C. The simulation results showed good agreement with maximum steady state error that is less than 6% of those obtained from the experiments for all runs. The proposed model can be implemented as a low-order physical model for the control of temperature inside plug-flow reactors for thermochemical energy storage applications.

Engineering↗
DOE OSTI2026

Foundation models for atomistic simulation of chemistry and materials

Conventional computational methods for modeling chemical and materials systems are limited by system size and timescale, forcing a trade-off between quantum-mechanical accuracy and the sampling needed for realistic observables. Large language and vision foundation models — pre-trained on massive datasets using transformer architectures — have revolutionized many fields. It is thus interesting to ask whether a foundation model — subject to suitable data, parameter scaling and training — could enable learned simulations of chemistry and materials. Here, in this study, we review the field of machine-learned interatomic potentials (MLIPs) and posit that scaling up large and diverse chemical and materials datasets and highly expressive architectures using advanced training strategies should result in models that are: more efficient, transferable, robust to out-of-distribution scenarios, and easier to fine-tune to a variety of downstream physical observables than models trained from scratch on small datasets corresponding to specific, targeted atomistic simulation tasks. We provide specific criteria for creating such large-scale MLIP foundation models, coordinated strategies for their development, evaluation and deployment, and highlight potential emergent capabilities that could transform predictive simulations in chemistry and materials science and accelerate discovery across multiple technological domains.

Yuan, Eric C.-Y. [University of California, Berkel↗
DOE OSTI2023

Influence of building heat distribution temperatures on the energy performance and sizing of 5th generation district heating and cooling networks

This paper investigates the energy performance and sizing criteria of 5th generation district heating and cooling (5GDHC) networks as a function of the heat distribution temperature in the building systems connected to the district network. An energy simulation model of a 5GDHC network was developed in Modelica for a case study located in Denmark. Calculations were carried out for four different building heating systems. Simulation results show that reducing the heat distribution temperatures from 70 °C to 23 °C leads to around 40% annual electric energy savings (from 10.4 kWh/m 2 to 6.2 kWh/m 2 ) for the operation of the heat pumps. Heat distribution temperatures of 23 °C cause higher water mass flow rates through the network, leading to annual electric energy consumption for the circulation pumps that are almost doubled (from 0.16 kWh/m 2 to 0.3 kWh/m 2 ) compared to the reference case at 70 °C. Furthermore, the paper discusses how the results obtained from the Danish case study can be generalized and applied to other cases using a simplified mathematical approach. In conclusion, it is found that about 1.5% of electric energy savings can be achieved for each temperature degree reduction in the heat distribution system.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Matrix Approach to Accelerate Spin-Up of CLM5

Numerical models have been developed to investigate and understand responses of biogeochemical cycle to global changes. Steady state, when a system is in dynamic equilibrium, is generally required to initialize these model simulations. However, the spin-up process that is used to achieve steady state pose a great burden to computational resources, limiting the efficiency of global modeling analysis on biogeochemical cycles. This study introduces a new Semi-Analytical Spin-Up (SASU) to tackle this grand challenge. We applied SASU to Community Land Model version 5 and examined its computational efficiency and accuracy. At the Brazil site, SASU is computationally 7 times more efficient than (or saved up to 86% computational cost in comparison with) the traditional native dynamics (ND) spin-up to reach the same steady state. Globally, SASU is computationally 8 times more efficient than the accelerated decomposition spin-up and 50 times more efficient than ND. In summary, SASU achieves the highest computational efficiency for spin-up on site and globally in comparison with other spin-up methods. It is generalizable to wide biogeochemical models and thus makes computationally costly studies (e.g., parameter perturbation ensemble analysis and data assimilation) possible for a better understanding of biogeochemical cycle under climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The role of the tropical Atlantic in tropical Pacific climate variability

Abstract Interactions between Atlantic and Pacific Oceans can affect tropical Pacific variability and its global impacts at both interannual and decadal timescales. Thus, a deepened understanding of the coupled Atlantic-Pacific interactions is needed. While possible dynamical mechanisms by which the Atlantic can influence the Pacific have been identified, the effectiveness of those mechanisms is difficult to establish using climate model simulations where Atlantic sea surface temperatures (SSTs) are prescribed and Pacific feedbacks cannot be realistically included. As an alternative approach, here we use a Linear Inverse Model (LIM) trained on observations and capable of correctly reproducing the observed statistics, to assess the relative role of the Atlantic-to-Pacific and Pacific-to-Atlantic influences on tropical Pacific variability. Our results indicate that Atlantic internal variability can enhance interannual SST anomalies in the eastern equatorial Pacific, and decadal SST anomalies in the central equatorial Pacific, while Pacific influences on the Atlantic significantly damp tropical Pacific decadal variability. This methodological framework could also be used to assess climate model fidelity in representing tropical basin interactions, helping to reconcile existing differences among models’ results.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

A Power Application Developer’s Guide to the Common Information Model: An Introduction for Power Systems Engineers and Application Developers – CIM17v40

A key issue in creating the next generation of energy management system (EMS) and advanced distribution management system (ADMS) platforms will be the ability to represent and exchange power system network model data in a consistent manner. To this end, the Common Information Model (CIM) stands out as the only standardized vocabulary (or ontology) for defining power system network models and asset data in a comprehensive, consistent manner across the generation-transmission-distribution boundary. The CIM is freely available to use and extend. The CIM is maintained by the UCAiug (informally known as the CIM User’s Group) under an Apache 2.0 license. The CIM Users Group collaborates with the IEC and other standards communities for the development of technical and informative specifications. Although portions of the information model are referred to by the corresponding IEC standards naming, it is not necessary to purchase any of the IEC standards to use the CIM information model. This document provides a roadmap for power system engineers and application developers not familiar with semantic modeling to start using the CIM for modeling, simulation, optimization, and development of advanced power applications. The key classes needed for defining power system topology and equipment are explained systematically. Key focus areas include modeling of lines, transformers, generators, switching equipment, loads, and distributed energy resources (DERs).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Using Residential and Office Building Archetypes for Energy Efficiency Building Solutions in an Urban Scale: A China Case Study

Building energy consumption accounts for 36% of the overall energy end use worldwide and is growing rapidly as developing countries continue to urbanize. Understanding the energy use at urban scale will lay the foundation for identification of energy efficiency opportunities to be deployed at speed. China has almost half of global new constructions and plays an important role in building suitability. However, an open source national building energy consumption database is not available in China. To provide data support for building energy consumptions, this paper used a simulation method to develop an urban building energy consumption database for a pilot city in Wuhan, China. First, residential, small, and large office building archetype energy models were created in EnergyPlus to represent typical building energy consumption in Wuhan. The baseline reference model simulation results were further validated using survey data from the literature. Second, stochastic simulations were conducted to consider different design parameters and occupants’ energy usage intensity scenarios, such as thermal properties of the building envelope, lighting power density, equipment power density, HVAC (heating, ventilation and air conditioning) schedule, etc. A building energy consumption database was generated for typical building archetypes. Third, data-driven regression analysis was conducted to support quick building energy consumption prediction using key high- level building information inputs. Finally, a web-based urban energy platform and an interface were developed to support further third-party application development. The research is expected to provide fast energy efficiency building design solutions for urban planning, new constructions as well as building retrofits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Power Analysis of an ePump Applied to the Linear Functions of an Agricultural Planter

Like many other industries, the agricultural industry has recently ex-perienced pressure to reduce vehicle emissions while improving productivity. Electric actuation is perceived as a viable solution to replace or augment hydrau-lic and mechanical actuation. However, electrification presents challenges with regards to linear functions, where hydraulic actuators have advantages in terms of compactness, tolerance to contamination and resistance to shocks. A combined electro-hydraulic actuation architecture can leverage the benefits of both electric and hydraulic actuation, while reducing the drawbacks of both approaches. This work investigates the potential of a centralized electric driven pump (ePump) system powering the pressure-controlled linear functions of an agricul-tural planter, with the goal of improving the operating point of the main supply pump. In this application, the rotary functions are hydraulically actuated, alt-hough such a solution could be applied also to electric rotary actuation. This is accomplished by setting the ePump to boost the pressure supplied by the tractor to the level required by the linear functions. An accumulator is used to stabilize the flow requirements of the linear functions, and control the pressure supplied to the actuators. Two control schemes are proposed for the regulation of the ac-cumulator pressure, one favoring an efficient operating point for the ePump, the other favoring stable steady state operation. A simulation model of the baseline system and proposed system is developed and validated using experimental data from a full-scale machine. Using the vali-dated simulation, both control architectures are then evaluated for improvement in system power consumption and dynamic requirements on the ePump to assess their effectiveness. Both systems demonstrate significant improvement in power consumption over the baseline system, with the best solution improving effi-ciency by 64%.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Synchronization of the Recent Decline of East African Long Rains and Northwestern Eurasian Warming

Abstract The East African March–April–May (MAM, “long rains”) precipitation decline in recent decades remains a puzzle marked by various proposed large‐scale drivers. Here, the interannual variability of the long rains and their recent drying trend are examined using global model simulations and observations. Comparison of a control simulation and re‐initialized simulations in which land‐surface feedback is suppressed shows that much of the long rains deficit experienced between 1980 and 2014 is synchronized with the warming of the Northwestern Eurasian landmass. In agreement with the modeling results, multiple observational data sets reveal a strong negative correlation between MAM mean East African rainfall amount and the surface temperature over Northwestern Eurasia. Idealized simulations further indicate that warming in Northwestern Eurasia weakens the regional Hadley Cell and diverts the monsoonal transport of moisture away from Eastern Africa toward Europe and southern Africa, highlighting the role of remote land surface warming on the observed precipitation decline.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

E3SM: Improved Climate Prediction with Exascale Capability

The Energy Exascale Earth System Model (E3SM) project is an ongoing, state-of-the-science earth system modeling, simulation, and prediction effort that optimizes Department of Energy (DOE) computing resources to meet the science needs of the nation and the agency’s mission objectives. Climate simulation has become a proven tool for identifying and quantifying the impacts of climate change, but even greater accuracy is required at all levels to improve forecast precision. Understanding the impact of climate change on global and regional water cycles is one of the highest priorities and most difficult challenges in climate change prediction. As part of a subproject of DOE’s Exascale Computing Project, a multidisciplinary team including geophysical and computational scientists developed a multiscale modeling framework (MMF) to refine cloud representation in E3SM climate simulation on GPU accelerated supercomputers, making higher resolution, more computationally efficient predictions possible.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A high fidelity and user-friendly equation-oriented optimization model for carbon capture using a novel water-lean solvent

Research Triangle Institute (RTI) International and SLB have developed a novel water-lean solvent technology for carbon capture, demonstrating low specific reboiler duty (SRD) values at capture rates exceeding 90%. At the Technology Centre Mongstad (TCM) pilot plant, the technology achieved an SRD of 2.55 GJ/t-CO2 at 95% capture, utilizing an intercooler and a 5°C temperature approach in the lean/rich solvent cross exchanger. To meet varying carbon capture targets for Front End Engineering and Design (FEED) studies and to enable real-time optimization and advanced process control, an efficient optimization model is required. This model needs to minimize energy demand for a given capture rate and determine optimal operating parameters in response to fluctuating flue gas conditions. While an existing Aspen Plus simulation model, developed by RTI and SLB, accurately matches TCM plant data, its sequential modular (SM) strategy is too slow for real-time applications due to recycle streams and tight heat integration inherent in solvent-based carbon capture processes. Although an equation-oriented (EO) modeling strategy is more suitable for optimizing these processes, its adoption has been limited by several factors: feature limitations in Aspen Plus EO mode (e.g., lack of balance block support), a less user-friendly interface for variable identification and loop solving, complex troubleshooting of convergence issues, and the necessity for accurate initial values.

carbon capture↗
DOE OSTI2023

Earth-system-model evaluation of cloud and precipitation occurrence for supercooled and warm clouds over the Southern Ocean's Macquarie Island

Abstract. Over the remote Southern Ocean (SO), cloud feedbacks contribute substantially to Earth system model (ESM) radiative biases. The evolution of low Southern Ocean clouds (cloud-top heights < ∼ 3 km) is strongly modulated by precipitation and/or evaporation, which act as the primary sink of cloud condensate. Constraining precipitation processes in ESMs requires robust observations suitable for process-level evaluations. A year-long subset (April 2016–March 2017) of ground-based profiling instrumentation deployed during the Macquarie Island Cloud and Radiation Experiment (MICRE) field campaign (54.5∘ S, 158.9∘ E) combines a 95 GHz (W-band) Doppler cloud radar, two lidar ceilometers, and balloon-borne soundings to quantify the occurrence frequency of precipitation from the liquid-phase cloud base. Liquid-based clouds at Macquarie Island precipitate ∼ 70 % of the time, with deeper and colder clouds precipitating more frequently and at a higher intensity compared to thinner and warmer clouds. Supercooled cloud layers precipitate more readily than layers with cloud-top temperatures > 0 ∘C, regardless of the geometric thickness of the layer, and also evaporate more frequently. We further demonstrate an approach to employ these observational constraints for evaluation of a 9-year GISS-ModelE3 ESM simulation. Model output is processed through the Earth Model Column Collaboratory (EMC2) radar and lidar instrument simulator with the same instrument specifications as those deployed during MICRE, therefore accounting for instrument sensitivities and ensuring a coherent comparison. Relative to MICRE observations, the ESM produces a smaller cloud occurrence frequency, smaller precipitation occurrence frequency, and greater sub-cloud evaporation. The lower precipitation occurrence frequency by the ESM relative to MICRE contrasts with numerous studies that suggest a ubiquitous bias by ESMs to precipitate too frequently over the SO when compared with satellite-based observations, likely owing to sensitivity limitations of spaceborne instrumentation and different sampling methodologies for ground- versus space-based observations. Despite these deficiencies, the ESM reproduces the observed tendency for deeper and colder clouds to precipitate more frequently and at a higher intensity. The ESM also reproduces specific cloud regimes, including near-surface clouds that account for ∼ 25 % of liquid-based clouds during MICRE and optically thin, non-precipitating clouds that account for ∼ 27 % of clouds with bases higher than 250 m. We suggest that the demonstrated framework, which merges observations with appropriately constrained model output, is a valuable approach to evaluate processes responsible for cloud radiative feedbacks in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Cloud radiative effect dominates variabilities of surface energy budget in the dark Arctic

Climate models simulate a wide range of temperatures in the Arctic. Here we investigate one of the main drivers of changes in surface temperature: the net surface heat flux in the models. We show that in the winter months of the dark Arctic, there is a more than two-fold difference in the net surface heat fluxes among the models, and this difference is dominated by the downward infrared radiation from clouds. Owing to the small amount of water vapor in the winter Arctic, infrared radiation from clouds transmits more easily to the surface in the Arctic than at other latitudes, resulting in large cloud radiative effect at the surface. The dominant role of the cloud effect is also found in the transient variability of the net surface heat flux. Results demonstrate that accurate simulation of clouds is crucial for determining the net surface heat flux, which in turn affects surface temperature and sea ice properties in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Conduction Heat Transfer through Solid in Porous Materials: A Comparative Study by Finite-Element Simulations and Effective Medium Approximations

The development of insulation materials with low effective thermal conductivity is essential for energy savings in various applications, including buildings, food services, pipe insulation, and refrigeration. Such materials can be developed by using micro- or nanoporous structures, as well as low-thermal conductivity gases and/or reduced pressure. A variety of effective medium approximation (EMA) models have been developed to study thermal transport through solid in porous structures. However, in many cases, the impacts of porosity on solid conduction are not well predicted by EMA models because of the assumptions made for simplification. Furthermore, the results can vary by a factor of up to 1.5, depending on the morphology of the pores. Hence, proper guidance is needed to choose the appropriate EMA model for a given morphology. This work presents a finite element method study using COMSOL Multiphysics software for various geometries, including hollow cubes, overlapping hollow spheres (normally stacked and tightly packed), and Voronoi structures, and compares the results to those obtained from various EMA models. Simulation results for the hollow cubes and Voronoi structures matched well with the Maxwell-Eucken and Russell model. The results for hollow spheres closely matched the Bauer model and the Glicksman model with fitting parameters. This work provides guidance on analyzing and designing insulation materials for energy savings in the future.

36 MATERIALS SCIENCE↗